Pull ACPI fixes from Rafael Wysocki:
"These fix up the ACPI IRQ override quirk list and add two new entries
to it, add a new quirk to the ACPI backlight (video) driver, and fix
the ACPI battery driver.
Specifics:
- Add a quirk for Dell OptiPlex 5480 AIO to the ACPI backlight
(video) driver (Hans de Goede)
- Prevent the ACPI battery driver from crashing when unregistering a
battery hook and simplify battery hook locking in it (Armin Wolf)
- Fix up the ACPI IRQ override quirk list and add quirks for Asus
Vivobook X1704VAP and Asus ExpertBook B2502CVA to it (Hans de
Goede)"
* tag 'acpi-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: battery: Fix possible crash when unregistering a battery hook
ACPI: battery: Simplify battery hook locking
ACPI: video: Add backlight=native quirk for Dell OptiPlex 5480 AIO
ACPI: resource: Add Asus ExpertBook B2502CVA to irq1_level_low_skip_override[]
ACPI: resource: Add Asus Vivobook X1704VAP to irq1_level_low_skip_override[]
ACPI: resource: Loosen the Asus E1404GAB DMI match to also cover the E1404GA
ACPI: resource: Remove duplicate Asus E1504GAB IRQ override
Pull power management fixes from Rafael Wysocki:
"These fix two cpufreq issues, one in the core and one in the
intel_pstate driver:
- Fix CPU device node reference counting in the cpufreq core (Miquel
Sabaté Solà)
- Turn the spinlock used by the intel_pstate driver in hard IRQ
context into a raw one to prevent the driver from crashing when
PREEMPT_RT is enabled (Uwe Kleine-König)"
* tag 'pm-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Avoid a bad reference count on CPU node
cpufreq: intel_pstate: Make hwp_notify_lock a raw spinlock
Vadim Fedorenko says:
====================
Add option to provide OPT_ID value via cmsg
SOF_TIMESTAMPING_OPT_ID socket option flag gives a way to correlate TX
timestamps and packets sent via socket. Unfortunately, there is no way
to reliably predict socket timestamp ID value in case of error returned
by sendmsg. For UDP sockets it's impossible because of lockless
nature of UDP transmit, several threads may send packets in parallel. In
case of RAW sockets MSG_MORE option makes things complicated. More
details are in the conversation [1].
This patch adds new control message type to give user-space
software an opportunity to control the mapping between packets and
values by providing ID with each sendmsg.
The first patch in the series adds all needed definitions and implements
the function for UDP sockets. The explicit check of socket's type is not
added because subsequent patches in the series will add support for other
types of sockets. The documentation is also included into the first
patch.
Patch 2/4 adds support for TCP sockets. This part is simple and straight
forward.
Patch 3/4 adds support for RAW sockets. It's a bit tricky because
sock_tx_timestamp functions has to be refactored to receive full socket
cookie information to fill in ID. The commit b534dc46c8 ("net_tstamp:
add SOF_TIMESTAMPING_OPT_ID_TCP") did the conversion of sk_tsflags to
u32 but sock_tx_timestamp functions were not converted and still receive
16b flags. It wasn't a problem because SOF_TIMESTAMPING_OPT_ID_TCP was
not checked in these functions, that's why no backporting is needed.
Patch 4/4 adds selftests for new feature.
[1] https://lore.kernel.org/netdev/CALCETrU0jB+kg0mhV6A8mrHfTE1D1pr1SD_B9Eaa9aDPfgHdtA@mail.gmail.com/
====================
Link: https://patch.msgid.link/20241001125716.2832769-1-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The last type of sockets which supports SOF_TIMESTAMPING_OPT_ID is RAW
sockets. To add new option this patch converts all callers (direct and
indirect) of _sock_tx_timestamp to provide sockcm_cookie instead of
tsflags. And while here fix __sock_tx_timestamp to receive tsflags as
__u32 instead of __u16.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://patch.msgid.link/20241001125716.2832769-3-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SOF_TIMESTAMPING_OPT_ID socket option flag gives a way to correlate TX
timestamps and packets sent via socket. Unfortunately, there is no way
to reliably predict socket timestamp ID value in case of error returned
by sendmsg. For UDP sockets it's impossible because of lockless
nature of UDP transmit, several threads may send packets in parallel. In
case of RAW sockets MSG_MORE option makes things complicated. More
details are in the conversation [1].
This patch adds new control message type to give user-space
software an opportunity to control the mapping between packets and
values by providing ID with each sendmsg for UDP sockets.
The documentation is also added in this patch.
[1] https://lore.kernel.org/netdev/CALCETrU0jB+kg0mhV6A8mrHfTE1D1pr1SD_B9Eaa9aDPfgHdtA@mail.gmail.com/
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://patch.msgid.link/20241001125716.2832769-2-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull gpio fixes from Bartosz Golaszewski:
- fix a potential NULL-pointer dereference in gpiolib core
- fix a probe() regression from the v6.12 merge window and an older bug
leading to missed interrupts in gpio-davinci
* tag 'gpio-fixes-for-v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: Fix potential NULL pointer dereference in gpiod_get_label()
gpio: davinci: Fix condition for irqchip registration
gpio: davinci: fix lazy disable
Tariq Toukan says:
====================
net/mlx5: hw counters refactor
This is a patchset re-post, see:
https://lore.kernel.org/20240815054656.2210494-7-tariqt@nvidia.com
In this patchset, Cosmin refactors hw counters and solves perf scaling
issue.
Series generated against:
commit c824deb1a8 ("cxgb4: clip_tbl: Fix spelling mistake "wont" -> "won't"")
HW counters are central to mlx5 driver operations. They are hardware
objects created and used alongside most steering operations, and queried
from a variety of places. Most counters are queried in bulk from a
periodic task in fs_counters.c.
Counter performance is important and as such, a variety of improvements
have been done over the years. Currently, counters are allocated from
pools, which are bulk allocated to amortize the cost of firmware
commands. Counters are managed through an IDR, a doubly linked list and
two atomic single linked lists. Adding/removing counters is a complex
dance between user contexts requesting it and the mlx5_fc_stats_work
task which does most of the work.
Under high load (e.g. from connection tracking flow insertion/deletion),
the counter code becomes a bottleneck, as seen on flame graphs. Whenever
a counter is deleted, it gets added to a list and the wq task is
scheduled to run immediately to actually delete it. This is done via
mod_delayed_work which uses an internal spinlock. In some tests, waiting
for this spinlock took up to 66% of all samples.
This series refactors the counter code to use a more straight-forward
approach, avoiding the mod_delayed_work problem and making the code
easier to understand. For that:
- patch #1 moves counters data structs to a more appropriate place.
- patch #2 simplifies the bulk query allocation scheme by using vmalloc.
- patch #3 replaces the IDR+3 lists with an xarray. This is the main
patch of the series, solving the spinlock congestion issue.
- patch #4 removes an unnecessary cacheline alignment causing a lot of
memory to be wasted.
- patches #5 and #6 are small cleanups enabled by the refactoring.
====================
Link: https://patch.msgid.link/20241001103709.58127-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
num_counters is only used for deciding whether to grow the bulk query
buffer, which is done once more counters than a small initial threshold
are present. After that, maintaining num_counters serves no purpose.
This commit replaces that with an actual xarray traversal to count the
counters. This appears expensive at first sight, but is only done when
the number of counters is less than the initial threshold (8) and only
once every sampling interval. Once the number of counters goes above the
threshold, the bulk query buffer is grown to max size and the xarray
traversal is never done again.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241001103709.58127-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mlx5_fc struct has a cache for values queried from hw, which is
cacheline aligned. On x86_64, this results in:
struct mlx5_fc {
u32 id; /* 0 4 */
bool aging; /* 4 1 */
/* XXX 3 bytes hole, try to pack */
struct mlx5_fc_bulk * bulk; /* 8 8 */
/* XXX 48 bytes hole, try to pack */
/* --- cacheline 1 boundary (64 bytes) --- */
struct mlx5_fc_cache cache __attribute__((__aligned__(64)));
/* 64 24 */
u64 lastpackets; /* 88 8 */
u64 lastbytes; /* 96 8 */
/* size: 128, cachelines: 2, members: 6 */
/* sum members: 53, holes: 2, sum holes: 51 */
/* padding: 24 */
/* forced aligns: 1, forced holes: 1, sum forced holes: 48 */
} __attribute__((__aligned__(64)));
(output from pahole).
...So a 48+24=72 byte waste. As far as I can determine, this serves no
purpose other than maybe making sure that the values in the cache do not
span two cachelines in the worst case scenario, but that's not a valid
enough reason to waste 72 bytes per counter, especially since this code
is not performance-critical. There could potentially be hundreds of
thousands of counters (e.g. for connection-tracking), so this quickly
adds up to multiple MB wasted.
This commit removes the alignment, resulting in:
struct mlx5_fc {
[...]
/* size: 56, cachelines: 1, members: 6 */
/* sum members: 53, holes: 1, sum holes: 3 */
/* last cacheline: 56 bytes */
};
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241001103709.58127-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously, managing counters was a complicated affair involving an IDR,
a sorted double linked list, two single linked lists and a complex dance
between a non-periodic wq task and users adding/deleting counters.
Adding was done by inserting new counters into the IDR and into a single
linked list, leaving the wq to process the list and actually add the
counters into the double linked list, maintained sorted with the IDR.
Deleting involved adding the counter into another single linked list,
leaving the wq to actually unlink the counter from the other structures
and release it.
Dumping the counters is done with the bulk query API, which relies on
the counter list being sorted and unmutable during querying to
efficiently retrieve cached counter values.
Finally, the IDR data struct is deprecated.
This commit replaces all of that with an xarray.
Adding is now done directly, by using xa_lock.
Deleting is also done directly, under the xa_lock.
Querying is done from a periodic task running every sampling_interval
(default 1s) and uses the bulk query API for efficiency.
It works by iterating over the xarray:
- when a new bulk needs to be started, the bulk information is computed
under the xa_lock.
- the xa iteration state is saved and the xa_lock dropped.
- the HW is queried for bulk counter values.
- the xa_lock is reacquired.
- counter caches with ids covered by the bulk response are updated.
Querying always requests the max bulk length, for simplicity.
Counters could be added/deleted while the HW is queried. This is safe,
as the HW API simply returns unknown values for counters not in HW, but
those values won't be accessed. Only counters present in xarray before
bulk query will actually read queried cache values.
This cuts down the size of mlx5_fc by 4 pointers (88->56 bytes), which
amounts to ~3MB / 100K counters.
But more importantly, this solves the wq spinlock congestion issue seen
happening on high-rate counter insertion+deletion.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241001103709.58127-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The bulk query buffer starts out small (see [1]) and as soon as the
number of counters goes past the initial threshold grows to max
size (32K entries, 512KB) with a retry scheme.
This commit switches to using kvmalloc for the buffer, which has a near
zero likelihood of failing, and thus the explicit retry scheme becomes
superfluous and is taken out. On the low chance the allocation fails, it
will still be retried every sampling_interval, when the wq task runs.
[1] commit b247f32aec ("net/mlx5: Dynamically resize flow counters
query buffer")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241001103709.58127-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mlx5_fc_stats and mlx5_fc_pool structs are only used from
fs_counters.c. As such, make them private there.
mlx5_fc_pool is not used or referenced at all outside fs_counters.
mlx5_fc_stats is referenced from mlx5_core_dev, so instead of having it
as a direct member (which requires exporting it from fs_counters), store
a pointer to it, allocate it on init and clear it on destroy.
One caveat is that a simple container_of to get from a 'work' struct to
the outermost mlx5_core_dev struct directly no longer works, so an extra
pointer had to be added to mlx5_fc_stats back to the parent dev.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241001103709.58127-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull sound fixes from Takashi Iwai:
"Slightly high amount of changes in this round, partly because of my
vacation in the last weeks. But all changes are small and nothing
looks worrisome.
The biggest LOCs is MAINTAINERS updates, and there is a core change
for card-ID string creation for non-ASCII inputs. Others are rather
device-specific, such as new quirks and device IDs for ASoC, usual
HD-audio and USB-audio quirks and fixes, as well as regression fixes
in HD-audio HDMI audio and Conexant codec"
* tag 'sound-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (39 commits)
ALSA: hda/conexant: Fix conflicting quirk for System76 Pangolin
ALSA: line6: add hw monitor volume control to POD HD500X
ALSA: gus: Fix some error handling paths related to get_bpos() usage
ALSA: hda: Add missing parameter description for snd_hdac_stream_timecounter_init()
ALSA: usb-audio: Add native DSD support for Luxman D-08u
ALSA: core: add isascii() check to card ID generator
MAINTAINERS: ALSA: use linux-sound@vger.kernel.org list
Revert "ALSA: hda: Conditionally use snooping for AMD HDMI"
ASoC: intel: sof_sdw: Add check devm_kasprintf() returned value
ASoC: imx-card: Set card.owner to avoid a warning calltrace if SND=m
ASoC: dt-bindings: davinci-mcasp: Fix interrupts property
ASoC: qcom: sm8250: add qrb4210-rb2-sndcard compatible string
ASoC: dt-bindings: qcom,sm8250: add qrb4210-rb2-sndcard
ALSA: hda: fix trigger_tstamp_latched
ALSA: hda/realtek: Add a quirk for HP Pavilion 15z-ec200
ALSA: hda/generic: Drop obsoleted obey_preferred_dacs flag
ALSA: hda/generic: Unconditionally prefer preferred_dacs pairs
ALSA: silence integer wrapping warning
ASoC: Intel: soc-acpi: arl: Fix some missing empty terminators
ASoC: Intel: soc-acpi-intel-rpl-match: add missing empty item
...
Pull drm fixes from Dave Airlie:
"Weekly fixes, xe and amdgpu lead the way, with panthor, and few core
components getting various fixes. Nothing seems too out of the
ordinary.
atomic:
- Use correct type when reading damage rectangles
display:
- Fix kernel docs
dp-mst:
- Fix DSC decompression detection
hdmi:
- Fix infoframe size
sched:
- Update maintainers
- Fix race condition whne queueing up jobs
- Fix locking in drm_sched_entity_modify_sched()
- Fix pointer deref if entity queue changes
sysfb:
- Disable sysfb if framebuffer parent device is unknown
amdgpu:
- DML2 fix
- DSC fix
- Dispclk fix
- eDP HDR fix
- IPS fix
- TBT fix
i915:
- One fix for bitwise and logical "and" mixup in PM code
xe:
- Restore pci state on resume
- Fix locking on submission, queue and vm
- Fix UAF on queue destruction
- Fix resource release on freq init error path
- Use rw_semaphore to reduce contention on ASID->VM lookup
- Fix steering for media on Xe2_HPM
- Tuning updates to Xe2
- Resume TDR after GT reset to prevent jobs running forever
- Move id allocation to avoid userspace using a guessed number to
trigger UAF
- Fix OA stream close preventing pbatch buffers to complete
- Fix NPD when migrating memory on LNL
- Fix memory leak when aborting binds
panthor:
- Fix locking
- Set FOP_UNSIGNED_OFFSET in fops instance
- Acquire lock in panthor_vm_prepare_map_op_ctx()
- Avoid uninitialized variable in tick_ctx_cleanup()
- Do not block scheduler queue if work is pending
- Do not add write fences to the shared BOs
vbox:
- Fix VLA handling"
* tag 'drm-fixes-2024-10-04' of https://gitlab.freedesktop.org/drm/kernel: (41 commits)
drm/xe: Fix memory leak when aborting binds
drm/xe: Prevent null pointer access in xe_migrate_copy
drm/xe/oa: Don't reset OAC_CONTEXT_ENABLE on OA stream close
drm/xe/queue: move xa_alloc to prevent UAF
drm/xe/vm: move xa_alloc to prevent UAF
drm/xe: Clean up VM / exec queue file lock usage.
drm/xe: Resume TDR after GT reset
drm/xe/xe2: Add performance tuning for L3 cache flushing
drm/xe/xe2: Extend performance tuning to media GT
drm/xe/mcr: Use Xe2_LPM steering tables for Xe2_HPM
drm/xe: Use helper for ASID -> VM in GPU faults and access counters
drm/xe: Convert to USM lock to rwsem
drm/xe: use devm_add_action_or_reset() helper
drm/xe: fix UAF around queue destruction
drm/xe/guc_submit: add missing locking in wedged_fini
drm/xe: Restore pci state upon resume
drm/amd/display: Fix system hang while resume with TBT monitor
drm/amd/display: Enable idle workqueue for more IPS modes
drm/amd/display: Add HDR workaround for specific eDP
drm/amd/display: avoid set dispclk to 0
...
As per the SAMA5D2 device specification it supports Jumbo frames.
But the suggested flag and length of bytes it supports was not updated
in this driver config_structure.
The maximum jumbo frames the device supports:
10240 bytes as per the device spec.
While changing the MTU value greater than 1500, it threw error:
sudo ifconfig eth1 mtu 9000
SIOCSIFMTU: Invalid argument
Add this support to driver so that it works as expected and designed.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://patch.msgid.link/20241003171941.8814-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull block fixes from Jens Axboe:
- Fix another use-after-free in aoe
- Fixup wrong nested non-saving irq disable/restore in blk-iocost
- Fixup a kerneldoc complaint introduced by a merge window patch
* tag 'block-6.12-20241004' of git://git.kernel.dk/linux:
aoe: fix the potential use-after-free problem in more places
blk_iocost: remove some duplicate irq disable/enables
block: fix blk_rq_map_integrity_sg kernel-doc
Pull io_uring fixes from Jens Axboe:
- Fix an error path memory leak, if one part fails to allocate.
Obviously not something that'll generally hit without error
injection.
- Fix an io_req_flags_t cast to make sparse happier.
- Improve the recv multishot termination. Not a bug now, but could be
one in the future. This makes it do the same thing that recvmsg does
in terms of when to terminate a request or not.
* tag 'io_uring-6.12-20241004' of git://git.kernel.dk/linux:
io_uring/net: harden multishot termination case for recv
io_uring: fix casts to io_req_flags_t
io_uring: fix memory leak when cache init fail
Pull fsnotify fixes from Jan Kara:
"Fixes for an inotify deadlock and a data race in fsnotify"
* tag 'fsnotify_for_v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
inotify: Fix possible deadlock in fsnotify_destroy_mark
fsnotify: Avoid data race between fsnotify_recalc_mask() and fsnotify_object_watched()
Pull UDF fixes from Jan Kara:
"A couple of UDF error handling fixes for issues spotted by syzbot"
* tag 'fs_for_v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: fix uninit-value use in udf_get_fileshortad
udf: refactor inode_bmap() to handle error
udf: refactor udf_next_aext() to handle error
udf: refactor udf_current_aext() to handle error
Pull ceph fixes from Ilya Dryomov:
"A fix from Patrick for a variety of CephFS lockup scenarios caused by
a regression in cap handling which sneaked in through the netfs helper
library in 5.18 (marked for stable) and an unrelated one-line cleanup"
* tag 'ceph-for-6.12-rc2' of https://github.com/ceph/ceph-client:
ceph: fix cap ref leak via netfs init_request
ceph: use struct_size() helper in __ceph_pool_perm_get()
Merge an ACPI backlight (video) quirk and ACPI battery driver fix and
cleanup for 6.12-rc2:
- Add a quirk for Dell OptiPlex 5480 AIO to the ACPI backlight (video)
driver (Hans de Goede).
- Prevent the ACPI battery driver from crashing when unregistering a
battery hook and simplify battery hook locking in it (Armin Wolf).
* acpi-video:
ACPI: video: Add backlight=native quirk for Dell OptiPlex 5480 AIO
* acpi-battery:
ACPI: battery: Fix possible crash when unregistering a battery hook
ACPI: battery: Simplify battery hook locking
Pull btrfs fixes from David Sterba:
- in incremental send, fix invalid clone operation for file that got
its size decreased
- fix __counted_by() annotation of send path cache entries, we do not
store the terminating NUL
- fix a longstanding bug in relocation (and quite hard to hit by
chance), drop back reference cache that can get out of sync after
transaction commit
- wait for fixup worker kthread before finishing umount
- add missing raid-stripe-tree extent for NOCOW files, zoned mode
cannot have NOCOW files but RST is meant to be a standalone feature
- handle transaction start error during relocation, avoid potential
NULL pointer dereference of relocation control structure (reported by
syzbot)
- disable module-wide rate limiting of debug level messages
- minor fix to tracepoint definition (reported by checkpatch.pl)
* tag 'for-6.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: disable rate limiting when debug enabled
btrfs: wait for fixup workers before stopping cleaner kthread during umount
btrfs: fix a NULL pointer dereference when failed to start a new trasacntion
btrfs: send: fix invalid clone operation for file that got its size decreased
btrfs: tracepoints: end assignment with semicolon at btrfs_qgroup_extent event class
btrfs: drop the backref cache during relocation if we commit
btrfs: also add stripe entries for NOCOW writes
btrfs: send: fix buffer overflow detection when copying path to cache entry
Pull smb client fixes from Steve French:
- statfs fix (e.g. when limited access to root directory of share)
- special file handling fixes: fix packet validation to avoid buffer
overflow for reparse points, fixes for symlink path parsing (one for
reparse points, and one for SFU use case), and fix for cleanup after
failed SET_REPARSE operation.
- fix for SMB2.1 signing bug introduced by recent patch to NFS symlink
path, and NFS reparse point validation
- comment cleanup
* tag 'v6.12-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Do not convert delimiter when parsing NFS-style symlinks
cifs: Validate content of NFS reparse point buffer
cifs: Fix buffer overflow when parsing NFS reparse points
smb: client: Correct typos in multiple comments across various files
smb: client: use actual path when queryfs
cifs: Remove intermediate object of failed create reparse call
Revert "smb: client: make SHA-512 TFM ephemeral"
smb: Update comments about some reparse point tags
cifs: Check for UTF-16 null codepoint in SFU symlink target location
Align PSE memory configuration to vendor SDK. In particular, increase
initial value of PSE reserved memory in airoha_fe_pse_ports_init()
routine by the value used for the second Packet Processor Engine (PPE2)
and do not overwrite the default value.
Introduced by commit 23020f0493 ("net: airoha: Introduce ethernet support
for EN7581 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241001-airoha-eth-pse-fix-v2-2-9a56cdffd074@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Store the default value for the number of PSE reserved pages in orig_val
at the beginning of airoha_fe_set_pse_oq_rsv routine, before updating it
with airoha_fe_set_pse_queue_rsv_pages().
Introduce airoha_fe_get_pse_all_rsv utility routine.
Introduced by commit 23020f0493 ("net: airoha: Introduce ethernet support
for EN7581 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241001-airoha-eth-pse-fix-v2-1-9a56cdffd074@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull close_range() fix from Al Viro:
"Fix the logic in descriptor table trimming"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
close_range(): fix the logics in descriptor table trimming
Javier Carrasco says:
====================
net: switch to scoped device_for_each_child_node()
This series switches from the device_for_each_child_node() macro to its
scoped variant. This makes the code more robust if new early exits are
added to the loops, because there is no need for explicit calls to
fwnode_handle_put(), which also simplifies existing code.
The non-scoped macros to walk over nodes turn error-prone as soon as
the loop contains early exits (break, goto, return), and patches to
fix them show up regularly, sometimes due to new error paths in an
existing loop [1].
Note that the child node is now declared in the macro, and therefore the
explicit declaration is no longer required.
The general functionality should not be affected by this modification.
If functional changes are found, please report them back as errors.
Link: https://lore.kernel.org/20240901160829.709296395@linuxfoundation.org
v1: https://lore.kernel.org/r/20240930-net-device_for_each_child_node_scoped-v1-0-bbdd7f9fd649@gmail.com
====================
Link: https://patch.msgid.link/20240930-net-device_for_each_child_node_scoped-v2-0-35f09333c1d7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There has already been an issue with the handling of early exits from
device_for_each_child() in this driver, and it was solved with commit
b1de5c78eb ("net: mdio: thunder: Add missing fwnode_handle_put()") by
adding a call to fwnode_handle_put() right after the loop.
That solution is valid indeed, but if a new error path with a 'return'
is added to the loop, this solution will fail. A more secure approach
is using the scoped variant of the macro, which automatically
decrements the refcount of the child node when it goes out of scope,
removing the need for explicit calls to fwnode_handle_put().
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20240930-net-device_for_each_child_node_scoped-v2-1-35f09333c1d7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michal Schmidt says:
====================
qed: 'ethtool -d' faster, less latency
Here is a patch to make 'ethtool -d' on a qede network device a lot
faster and 3 patches to make it cause less latency for other tasks on
non-preemptible kernels.
====================
Link: https://patch.msgid.link/20240930201307.330692-1-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is OK to sleep in qed_dmae_operation_wait, because it is called only
in process context, while holding p_hwfn->dmae_info.mutex from one of
the qed_dmae_{host,grc}2{host,grc} functions.
The udelay(DMAE_MIN_WAIT_TIME=2) in the function is too short to replace
with usleep_range, but at least it's a suitable point for checking if we
should give up the CPU with cond_resched().
This lowers the latency caused by 'ethtool -d' from 10 ms to less than
2 ms on my test system with voluntary preemption.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://patch.msgid.link/20240930201307.330692-5-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
qed_mcp_nvm_read has a loop where it calls qed_mcp_nvm_rd_cmd with the
argument b_can_sleep=false. And it sleeps once every 0x1000 bytes
read.
Simplify this by letting qed_mcp_nvm_rd_cmd itself sleep
(b_can_sleep=true). It will have slept at least once when successful
(in the "Wait for the MFW response" loop). So the extra sleep once every
0x1000 bytes becomes superfluous. Delete it.
On my test system with voluntary preemption, this lowers the latency
caused by 'ethtool -d' from 53 ms to 10 ms.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://patch.msgid.link/20240930201307.330692-4-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On a kernel with preemption none or voluntary, 'ethtool -d'
on a qede network device can cause a big latency spike.
The biggest part of it is the loop in qed_grc_dump_ctx_data.
The function is called only from the .get_size and .perform_dump
callbacks for the "grc" feature defined in qed_features_lookup[].
As far as I can see, they are used in:
- qed's devlink healh reporter .dump op
- qede's ethtool get_regs/get_regs_len/get_dump_data ops
- qedf's qedf_get_grc_dump, called from:
- qedf_sysfs_write_grcdump - "grcdump" sysfs attribute write
- qedf_wq_grcdump - a workqueue
It is safe to sleep in all of them.
Let's insert a cond_resched() in the outer loop to let other tasks run.
Measured using this script:
#!/bin/bash
DEV=ens3f1
echo wakeup_rt > /sys/kernel/tracing/current_tracer
echo 0 > /sys/kernel/tracing/tracing_max_latency
echo 1 > /sys/kernel/tracing/tracing_on
echo "Setting the task CPU affinity"
taskset -p 1 $$ > /dev/null
echo "Starting the real-time task"
chrt -f 50 bash -c 'while sleep 0.01; do :; done' &
sleep 1
echo "Running: ethtool -d $DEV"
time ethtool -d $DEV > /dev/null
kill %1
echo 0 > /sys/kernel/tracing/tracing_on
echo "Measured latency: $(</sys/kernel/tracing/tracing_max_latency) us"
echo "To see the latency trace: less /sys/kernel/tracing/trace"
The patch lowers the latency from 180 ms to 53 ms on my test system with
voluntary preemption.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://patch.msgid.link/20240930201307.330692-3-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As a side effect of commit 5401c3e099 ("qed: allow sleep in
qed_mcp_trace_dump()"), 'ethtool -d' became much slower.
Almost all the time is spent collecting the "mcp_trace".
It is caused by sleeping too long in _qed_mcp_cmd_and_union.
When called with sleeping not allowed, the function delays for 10 µs
between firmware polls. But if sleeping is allowed, it sleeps for 10 ms
instead.
The sleeps in _qed_mcp_cmd_and_union are unnecessarily long.
Replace msleep with usleep_range, which allows to achieve a similar
polling interval like in the no-sleeping mode (10 - 20 µs).
The only caller, qed_mcp_cmd_and_union, can stop doing the
multiplication/division of the usecs/max_retries. The polling interval
and the number of retries do not need to be parameters at all.
On my test system, 'ethtool -d' now takes 4 seconds instead of 44.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://patch.msgid.link/20240930201307.330692-2-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch reverts two TOMOYO patches that were merged into Linus' tree
during the v6.12 merge window:
8b985bbfab ("tomoyo: allow building as a loadable LSM module")
268225a1de ("tomoyo: preparation step for building as a loadable LSM module")
Together these two patches introduced the CONFIG_SECURITY_TOMOYO_LKM
Kconfig build option which enabled a TOMOYO specific dynamic LSM loading
mechanism (see the original commits for more details). Unfortunately,
this approach was widely rejected by the LSM community as well as some
members of the general kernel community. Objections included concerns
over setting a bad precedent regarding individual LSMs managing their
LSM callback registrations as well as general kernel symbol exporting
practices. With little to no support for the CONFIG_SECURITY_TOMOYO_LKM
approach outside of Tetsuo, and multiple objections, we need to revert
these changes.
Link: https://lore.kernel.org/all/0c4b443a-9c72-4800-97e8-a3816b6a9ae2@I-love.SAKURA.ne.jp
Link: https://lore.kernel.org/all/CAHC9VhR=QjdoHG3wJgHFJkKYBg7vkQH2MpffgVzQ0tAByo_wRg@mail.gmail.com
Acked-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
alloc_ltalkdev in net/appletalk/dev.c is dead since
commit 00f3696f75 ("net: appletalk: remove cops support")
Removing it (and it's helper) leaves dev.c and if_ltalk.h empty;
remove them and the Makefile entry.
tun.c was including that if_ltalk.h but actually wanted
the uapi version for LTALK_ALEN, fix up the path.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds
Jakub Kicinski
Vadim Fedorenko
Cosmin Ratiu
Riyan Dhiman
Aleksander Jan Bajkowski
Rafael J. Wysocki
Lorenzo Bianconi
Wolfram Sang
Javier Carrasco
Michal Schmidt
Rosen Penev
Paul Moore
Dr. David Alan Gilbert