commit 5d150fa0f1 upstream.
The current settings for the "image vertical start" register appear to be
incorrect. While this only results in an incorrect start line for native
modes, this faulty setting causes actual problems in binning mode. At least
on an i.MX8MP test system, only corrupted frames could be received.
To correct this, the recommended settings from the reference register sets
are used for all modes. Since this shifts the start by one line, the Bayer
pattern also changes, which has also been corrected.
Fixes: 7be91e02ed ("media: i2c: Add ov08d10 camera sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dde3c37af9 upstream.
In dib8000_set_dds(), 1 << 26 (67108864) divided by e.g. 1 apparently can't
fit into 16-bit variable unit_khz_dds_val, being truncated to 0; this will
cause division by 0 while calling dprintk() with debugging enabled (via the
module parameter). Use s32 instead of s16 to declare the variable, getting
rid of the cast to u16 in the *else* branch as well...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Fixes: 173a64cb3f ("[media] dib8000: enhancement")
Cc: stable@vger.kernel.org
Signed-off-by: Sergey Shtylyov <s.shtylyov@auroraos.dev>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ea21435fe upstream.
The memory allocated for codec in videocodec_attach() is not freed in
one of the error paths, due to an incorrect goto label. Fix the label
to free it on error.
Fixes: 8f7cc5c0b0 ("media: staging: media: zoran: introduce zoran_i2c_init")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d51c60a498 upstream.
Add checks for ioremap return values in saa7164_dev_setup(). If
ioremap for BAR0 or BAR2 fails, release the already allocated PCI
memory regions, remove the device from the global list, decrement
the device count, and return -ENODEV.
This prevents potential null pointer dereferences and ensures proper
cleanup on memory mapping failures.
Fixes: 443c1228d5 ("V4L/DVB (12923): SAA7164: Add support for the NXP SAA7164 silicon")
Cc: stable@vger.kernel.org
Signed-off-by: Wang Jun <1742789905@qq.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cac61b58a3 upstream.
A device would never lie about the number of touch reports would it?
If it does the loop in dualshock4_parse_report will read off the end of
the touch_reports array, up to about 2 KiB for the maximum number of 256
loop iteraions. The data that is read is emitted via evdev if the
DS4_TOUCH_POINT_INACTIVE bit happens to be set. Protect against this by
clamping the num_touch_reports value provided by the device to the
maximum size of the touch_reports array.
Fixes: 7520382488 ("HID: playstation: add DualShock4 touchpad support.")
Cc: stable@vger.kernel.org
Reported-by: Xingyu Jin <xingyuj@google.com>
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b8e753128e upstream.
Currently, the coredump_task_exit() function sets the task state
to TASK_UNINTERRUPTIBLE|TASK_FREEZABLE, which usually works well.
But a combination of large memory and slow (and/or highly contended)
mass storage can cause application core dumps to take more than
two minutes, which can cause check_hung_task(), which is invoked by
check_hung_uninterruptible_tasks(), to produce task-blocked splats.
There does not seem to be any reasonable benefit to getting these splats.
Furthermore, as Oleg Nesterov points out, TASK_UNINTERRUPTIBLE could
be misleading because the task sleeping in coredump_task_exit() really
is killable, albeit indirectly. See the check of signal->core_state
in prepare_signal() and the check of fatal_signal_pending()
in dump_interrupted(), which bypass the normal unkillability of
TASK_UNINTERRUPTIBLE, resulting in coredump_finish() invoking
wake_up_process() on any threads sleeping in coredump_task_exit().
Therefore, change that TASK_UNINTERRUPTIBLE to TASK_IDLE.
Reported-by: Anhad Jai Singh <ffledgling@meta.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 49f33840dc upstream.
When firmware enables 64-bit PCI host bridge support, some root bridges
already provide valid 64-bit mem resource windows through ACPI.
In this case, the LoongArch-specific mem resource high-bits fixup in
acpi_prepare_root_resources() should not be applied unconditionally.
Otherwise, the kernel may override the native resource layout derived
from firmware, and later BAR assignment can fail to place device BARs
into the intended 64-bit address space correctly.
Add a per-root-bridge ACPI flag, PCIH, and evaluate it from the current
root bridge device scope. When PCIH is set, skip the mem resource high-
bits fixup path and let the kernel use the firmware-provided resource
description directly. When PCIH is absent or cleared, keep the existing
behavior and continue filling the high address bits from the host bridge
address.
This makes the behavior per-root-bridge configurable and avoids breaking
valid 64-bit BAR space allocation on bridges whose 64-bit windows have
already been fully described by firmware.
Cc: stable@vger.kernel.org
Suggested-by: Chao Li <lichao@loongson.cn>
Tested-by: Dongyan Qian <qiandongyan@loongson.cn>
Signed-off-by: Dongyan Qian <qiandongyan@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5bb0aed57b upstream.
fix_host_ownership() walks the hypervisor's stage-1 page-table to
adjust the host's stage-2 accordingly. Any such adjustment that
requires cache maintenance operations depends on the per-CPU hyp
fixmap being present. However, fix_host_ownership() is currently
called before fix_hyp_pgtable_refcnt() and hyp_create_fixmap(), so
the fixmap does not yet exist when it runs.
This is benign today because the host stage-2 starts empty and no
CMOs are needed, but it becomes a latent crash as soon as
fix_host_ownership() is extended to operate on a non-empty
page-table.
Reorder the calls so that fix_hyp_pgtable_refcnt() and
hyp_create_fixmap() complete before fix_host_ownership() is invoked.
Fixes: 0d16d12eb2 ("KVM: arm64: Fix-up hyp stage-1 refcounts for all pages mapped at EL2")
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260424084908.370776-7-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a0e6ae45af upstream.
The uaccess write handlers for GICD_IIDR in both GICv2 and GICv3
extract the revision field from 'reg' (the current IIDR value read back
from the emulated distributor) instead of 'val' (the value userspace is
trying to write). This means userspace can never actually change the
implementation revision — the extracted value is always the current one.
Fix the FIELD_GET to use 'val' so that userspace can select a different
revision for migration compatibility.
Fixes: 49a1a2c70a ("KVM: arm64: vgic-v3: Advertise GICR_CTLR.{IR, CES} as a new GICD_IIDR revision")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://patch.msgid.link/20260407210949.2076251-2-dwmw2@infradead.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ed78aeebef upstream.
f2fs_destroy_extent_node() does not set FI_NO_EXTENT before clearing
extent nodes. When called from f2fs_drop_inode() with I_SYNC set,
concurrent kworker writeback can insert new extent nodes into the same
extent tree, racing with the destroy and triggering f2fs_bug_on() in
__destroy_extent_node(). The scenario is as follows:
drop inode writeback
- iput
- f2fs_drop_inode // I_SYNC set
- f2fs_destroy_extent_node
- __destroy_extent_node
- while (node_cnt) {
write_lock(&et->lock)
__free_extent_tree
write_unlock(&et->lock)
- __writeback_single_inode
- f2fs_outplace_write_data
- f2fs_update_read_extent_cache
- __update_extent_tree_range
// FI_NO_EXTENT not set,
// insert new extent node
} // node_cnt == 0, exit while
- f2fs_bug_on(node_cnt) // node_cnt > 0
Additionally, __update_extent_tree_range() only checks FI_NO_EXTENT for
EX_READ type, leaving EX_BLOCK_AGE updates completely unprotected.
This patch set FI_NO_EXTENT under et->lock in __destroy_extent_node(),
consistent with other callers (__update_extent_tree_range and
__drop_extent_tree) and check FI_NO_EXTENT for both EX_READ and
EX_BLOCK_AGE tree.
Fixes: 3fc5d5a182 ("f2fs: fix to shrink read extent node in batches")
Cc: stable@vger.kernel.org
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb2ca3ca98 upstream.
When f2fs_map_blocks()->f2fs_map_blocks_cached() hits the read extent
cache, map->m_multidev_dio is not updated, which leads to incorrect
multidevice information being reported by trace_f2fs_map_blocks().
This patch updates map->m_multidev_dio in f2fs_map_blocks_cached() when
the read extent cache is hit.
Cc: stable@kernel.org
Fixes: 0094e98bd1 ("f2fs: factor a f2fs_map_blocks_cached helper")
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 95e159ad3e upstream.
f2fs_fiemap() calls f2fs_map_blocks() to obtain the block mapping a
file, and then merges contiguous mappings into extents. If the mapping
is found in the read extent cache, node blocks do not need to be read.
However, in the following scenario, a contiguous extent can be split
into two extents:
$ dd if=/dev/zero of=data.128M bs=1M count=128
$ losetup -f data.128M
$ mkfs.f2fs /dev/loop0 -f
$ mount -o mode=lfs /dev/loop0 /mnt/f2fs/
$ cd /mnt/f2fs/
$ dd if=/dev/zero of=data.72M bs=1M count=72 && sync
$ dd if=/dev/zero of=data.4M bs=1M count=4 && sync
$ dd if=/dev/zero of=data.4M bs=1M count=2 seek=2 conv=notrunc && sync
$ echo 3 > /proc/sys/vm/drop_caches
$ dd if=/dev/zero of=data.4M bs=1M count=2 seek=0 conv=notrunc && sync
$ dd if=/dev/zero of=data.4M bs=1M count=2 seek=0 conv=notrunc && sync
$ f2fs_io fiemap 0 1024 data.4M
Fiemap: offset = 0 len = 1024
logical addr. physical addr. length flags
0 0000000000000000 0000000006400000 0000000000200000 00001000
1 0000000000200000 0000000006600000 0000000000200000 00001001
Although the physical addresses of the ranges 0～2MB and 2M～4MB are
contiguous, the mapping for the 2M～4MB range is not present in memory.
When the physical addresses for the 0～2MB range are updated, no merge
happens because the adjacent mapping is missing from the in-memory
cache. As a result, fiemap reports two separate extents instead of a
single contiguous one.
The root cause is that the read extent cache does not guarantee that all
blocks of an extent are present in memory. Therefore, when the extent
length returned by f2fs_map_blocks_cached() is smaller than maxblocks,
the remaining mappings are retrieved via f2fs_get_dnode_of_data() to
ensure correct fiemap extent boundary handling.
Cc: stable@kernel.org
Fixes: cd8fc5226b ("f2fs: remove the create argument to f2fs_map_blocks")
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5471834a96 upstream.
f2fs_update_inode() reads inode->i_blocks without holding i_lock to
serialize it to the on-disk inode, while concurrent truncate or
allocation paths may modify i_blocks under i_lock. Since blkcnt_t is
u64, this risks torn reads on 32-bit architectures.
Following the approach in ext4_inode_blocks_set(), add READ_ONCE() to prevent
potential compiler-induced tearing.
Fixes: 19f99cee20 ("f2fs: add core inode operations")
Cc: stable@vger.kernel.org
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold
Haoxiang Li
Matthias Fend
Michael Tretter
Wenmeng Liu
Sergey Shtylyov
Abdun Nihaal
Krishna Chomal
Wang Jun
Janne Grunau
Oliver Neukum
Sakari Ailus
Alexander Koskovich
Ricardo Ribalda
T.J. Mercier
Paul E. McKenney
Huacai Chen
Wentao Guan
Quentin Perret
David Woodhouse
Yongpeng Yang
Cen Zhang