Replace manual mutex_lock/mutex_unlock pair with guard(mutex) in
adxl313_read_axis(). This ensures the mutex is released on all
return paths and allows returning directly without a goto label.
Signed-off-by: Rajveer Chaudhari <rajveer.chaudhari.linux@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The scan_mask flexible array member in hw_consumer_buffer duplicates
the scan_mask pointer already present in struct iio_buffer. Remove it
and allocate the bitmap directly with bitmap_zalloc(), assigning it to
buf->buffer.scan_mask. This simplifies the code and there's no need for
the flex array allocation.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There is no reason to extend the lifetime of this post removal of the
driver when it's only needed in one spot.
Moved tsc_regmap assignment to avoid two nvmem_cell_put calls.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the ACPI ambient light sensor driver to a
platform one.
After this change, the subordinate IIO device will be registered under
the platform device used for driver binding instead of its ACPI
companion.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When device_property_read_string() fails, str is left uninitialized
but the code falls through to strcmp(str, ...), dereferencing a garbage
pointer. Replace manual read/strcmp with
device_property_match_property_string() and consolidate the SE mode
enums into a single sequential enum, mapping to hardware register
values via a switch consistent with other bitfields in the driver.
Several cleanup patches have been applied to this driver recently so
this will need a manual backport.
Fixes: da35a7b526 ("iio: frequency: admv1013: add support for ADMV1013")
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reformat the device enum so each entry is on its own line and add a
trailing comma to the final enumerator. Also reformat the nearby monitor
speeds array for consistency.
No functional change.
Signed-off-by: Giorgi Tchankvetadze <giorgitchankvetadze1997@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Return -EINVAL instead of -1 when no matching gain value is found
in the gain table. Update the callers to propagate this error directly
rather than overwriting it with -EINVAL.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Waqar Hameed <waqar.hameed@axis.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for ADC found in Motorola Mot board, used as a base for
Atrix 4G and Droid X2 smartphones.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add compatible for ADC used in Mot board. Separate compatible is required
since ADC in the Mot board uses a unique set of configurations.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove unused dec_rate field from ad4080_state struct.
The driver reads/writes decimation rate directly from
hardware registers via ad4080_get_dec_rate() and
ad4080_set_dec_rate() functions.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Triggers exist under /sys/bus/iio/devices/, not under /sys/class/iio.
/sys/class/iio does not even exist. Use the current path.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Convert the iio registration to use devm_* helpers so the probe no
longer needs a separate cleanup path and remove callback can also drop
the unregister. After this there is no need for having a remove
callback, so remote it.
No functional change intended.
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: David Lechner <dlechner@baylibe.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
sca3000_stop_all_interrupts() is called only from the driver remove
path and its return value is discarded, so convert the helper to return
void.
No functional change.
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The driver has a some use of intXX_t and uintXX_t types which is
not the pattern we use in the IIO subsystem. Switch the driver
to use kernel internal types for that. No functional changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
C allows implicit conversion from void * to struct apds9306_data *, so the
explicit cast on 'ptr' is unnecessary. Removing it improves readability.
Signed-off-by: SAJJA EASWAR SAI <eshwarsajja20@gmail.com>
Acked-by: Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The i2c_transfer() function returns the number of messages
successfully transferred. The function sends 1 message but checks
for ret == 2, which can never be true.
In practice this has no impact since the caller checks ret < 0,
and the erroneous return value of 1 is not treated as an error.
Improve the return value handling to properly distinguish between
I2C errors and unexpected transfer counts.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Tested-by: Petre Rodan <petre.rodan@subdimension.ro>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Return -EINVAL instead of -1 when no valid PLL parameters solution is
found. Using standard kernel error codes ensures consistency and proper
error propagation through the call chain.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use guard() and scoped_guard() to replace manual mutex lock/unlock
calls. This simplifies error handling and ensures RAII-style cleanup.
guard() is used in read_raw, write_raw, trig_reen, and
trigger_set_state. Case blocks using guard() in read_raw and write_raw
are wrapped in braces at the case label level to ensure clear scope for
the cleanup guards.
A bmc150_magn_set_power_mode_locked() helper is added to deduplicate
the lock-call-unlock pattern used by remove, runtime_suspend, suspend,
and resume.
The trigger_handler function is left unchanged as mixing guard() with
goto error paths can be fragile.
Signed-off-by: Neel Bullywon <neelb2403@gmail.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
As stated in Documentation/filesystems/sysfs.rst:
'New implementations of show() methods should only use sysfs_emit() or
sysfs_emit_at() when formatting the value to be returned to user space.'
Replace sprintf with sysfs_emit in the following sysfs show functions:
- ad7816_show_mode()
- ad7816_show_available_modes()
- ad7816_show_channel()
- ad7816_show_value()
- ad7816_show_oti()
Signed-off-by: Bruno Martins <ehanoc@protonmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ADE9000_ST_ERROR macro references ADE9000_ST1_ERROR0
through ADE9000_ST1_ERROR3, but the actual defined symbols
use the BIT suffix. Since this macro is currently unused
in the driver, remove it entirely rather than fixing the names.
It can be reintroduced in a future patch when it is actually needed.
The individual error bit definitions (bits 28-31 of the STATUS1
register at 0x403) are retained as they follow the convention of
defining all register fields.
Reference: ADE9000 datasheet (Rev. B, Page 61), STATUS1 register
(0x403), bits 28-31 define ERROR0 through ERROR3 status flags.
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Giorgi Tchankvetadze <giorgitchankvetadze1997@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The array 'gryo_3d_sensitivity_addresses' has a clear spelling mistake
in its prefix. Rename it to 'gyro_3d_sensitivity_addresses' to correctly
match the naming convention.
Signed-off-by: Bhargav Joshi <rougueprince47@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD7768-1 family supports sampling rates up to 1 MSPS, which exceeds
the capabilities of conventional triggered buffer operations due to SPI
transaction overhead and interrupt latency.
Add SPI offload support to enable hardware-accelerated data acquisition
that bypasses software SPI transactions using continuous data streaming.
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The device continuously converts data while powered up, generating
interrupts in the background. Configure the IRQ to be enabled and
disabled manually as needed to avoid unnecessary CPU load.
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
wideband low ripple FIR Filter is not available in one-shot mode. In
order to make direct reads work for all filter options, remove the
switch for one-shot mode and guarantee device is always in continuous
conversion mode.
Fixes: fb1d3b24eb ("iio: adc: ad7768-1: add filter type and oversampling ratio attributes")
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
According to the datasheet, one-shot mode requires a SYNC_IN pulse to
trigger a new sample conversion. In the current implementation, No sync
pulse was sent after switching to one-shot mode and reinit_completion()
was called before mode switching, creating a race condition where spurious
interrupts during mode change could trigger completion prematurely.
Fix by sending a sync pulse after configuring one-shot mode and
reinit_completion() to ensure it only waits for the actual conversion
completion.
Fixes: a5f8c7da3d ("iio: adc: Add AD7768-1 ADC basic support")
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Rajveer Chaudhari
Nuno Sá
Rosen Penev
Rafael J. Wysocki
Antoniu Miclaus
Giorgi Tchankvetadze
Svyatoslav Ryhel
Cosmin Tanislav
Harshit Mogalapalli
Andy Shevchenko
Menderes Sabaz
SAJJA EASWAR SAI
Neel Bullywon
Bruno Martins
Felix Gu
Jun Yan
Bhargav Joshi
Jonathan Santos