Commit Graph
1382427 Commits
Author SHA1 Message Date
Yu Kuai c951ccf0bf md: add a new recovery_flag MD_RECOVERY_LAZY_RECOVER
This flag is used by llbitmap in later patches to skip raid456 initial
recover and delay building initial xor data to first write.

https://lore.kernel.org/linux-raid/20250829080426.1441678-10-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
2025-09-06 17:20:32 +08:00
Yu Kuai a4dd9ba39b md/md-bitmap: add a new method blocks_synced() in bitmap_operations
Currently, raid456 must perform a whole array initial recovery to build
initail xor data, then IO to the array won't have to read all the blocks
in underlying disks.

This behavior will affect IO performance a lot, and nowadays there are
huge disks and the initial recovery can take a long time. Hence llbitmap
will support lazy initial recovery in following patches. This method is
used to check if data blocks is synced or not, if not then IO will still
have to read all blocks for raid456.

Link: https://lore.kernel.org/linux-raid/20250829080426.1441678-9-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
2025-09-06 17:20:01 +08:00
Yu Kuai f196d72888 md/md-bitmap: add a new method skip_sync_blocks() in bitmap_operations
This method is used to check if blocks can be skipped before calling
into pers->sync_request(), llbitmap will use this method to skip
resync for unwritten/clean data blocks, and recovery/check/repair for
unwritten data blocks;

Link: https://lore.kernel.org/linux-raid/20250829080426.1441678-8-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Xiao Ni <xni@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Li Nan <linan122@huawei.com>
2025-09-06 17:19:45 +08:00
Yu Kuai fb8cc3b0d9 md/md-bitmap: delay registration of bitmap_ops until creating bitmap
Currently bitmap_ops is registered while allocating mddev, this is fine
when there is only one bitmap_ops.

Delay setting bitmap_ops until creating bitmap, so that user can choose
which bitmap to use before running the array.

Link: https://lore.kernel.org/linux-raid/20250721171557.34587-7-yukuai@kernel.org
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Li Nan <linan122@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
2025-09-06 17:19:19 +08:00
Yu Kuai 180b82c1c7 md/md-bitmap: add a new sysfs api bitmap_type
The api will be used by mdadm to set bitmap_type while creating new array
or assembling array, prepare to add a new bitmap.

Currently available options are:

cat /sys/block/md0/md/bitmap_type
none [bitmap]

Link: https://lore.kernel.org/linux-raid/20250829080426.1441678-6-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Xiao Ni <xni@redhat.com>
Reviewed-by: Li Nan <linan122@huawei.com>
2025-09-06 17:19:04 +08:00
Yu Kuai 300bffa870 md: add a new mddev field 'bitmap_id'
Prepare to store the bitmap id selected by user, also refactor
mddev_set_bitmap_ops a bit in case the value is invalid.

Link: https://lore.kernel.org/linux-raid/20250829080426.1441678-5-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Li Nan <linan122@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
2025-09-06 17:18:48 +08:00
Yu Kuai ac9dad8faa md/md-bitmap: support discard for bitmap ops
Use two new methods {start, end}_discard in bitmap_ops and a new field 'rw'
in struct md_io_clone to handle discard IO, prepare to support new md
bitmap.

Since all bitmap functions to hanlde write IO are the same, also add
typedef to make code cleaner.

Link: https://lore.kernel.org/linux-raid/20250829080426.1441678-4-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Li Nan <linan122@huawei.com>
2025-09-06 17:18:19 +08:00
Yu Kuai 7797da149d md: factor out a helper raid_is_456()
There are no functional changes, the helper will be used by llbitmap in
following patches.

Link: https://lore.kernel.org/linux-raid/20250829080426.1441678-3-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Li Nan <linan122@huawei.com>
2025-09-06 17:17:58 +08:00
Yu Kuai d01acbce39 md: add a new parameter 'offset' to md_super_write()
The parameter is always set to 0 for now, following patches will use
this helper to write llbitmap to underlying disks, allow writing
dirty sectors instead of the whole page.

Also rename md_super_write to md_write_metadata since there is nothing
super-block specific.

Link: https://lore.kernel.org/linux-raid/20250829080426.1441678-2-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Li Nan <linan122@huawei.com>
2025-09-06 17:17:26 +08:00
Yu Kuai c27474ac1d md/md-bitmap: introduce CONFIG_MD_BITMAP
Now that all implementations are internal, it's sensible to add a config
option for md-bitmap, and it's a good way for isolation.

Link: https://lore.kernel.org/linux-raid/20250707012711.376844-16-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
2025-09-06 17:12:22 +08:00
Yu Kuai 26292657ad md: check before referencing mddev->bitmap_ops
Prepare to introduce CONFIG_MD_BITMAP.

Link: https://lore.kernel.org/linux-raid/20250707012711.376844-15-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
2025-09-06 17:12:19 +08:00
Yu Kuai 0e18745420 md/dm-raid: check before referencing mddev->bitmap_ops
Prepare to introduce CONFIG_MD_BITMAP.

Link: https://lore.kernel.org/linux-raid/20250707012711.376844-14-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
2025-09-06 17:12:15 +08:00
Yu Kuai bb9317b13a md/raid5: check before referencing mddev->bitmap_ops
Prepare to introduce CONFIG_MD_BITMAP.

Link: https://lore.kernel.org/linux-raid/20250707012711.376844-13-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
2025-09-06 17:12:11 +08:00
Yu Kuai 969f996243 md/raid10: check before referencing mddev->bitmap_ops
Prepare to introduce CONFIG_MD_BITMAP.

Link: https://lore.kernel.org/linux-raid/20250707012711.376844-12-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
2025-09-06 17:12:07 +08:00
Yu Kuai 8d31ed3b77 md/raid1: check before referencing mddev->bitmap_ops
Prepare to introduce CONFIG_MD_BITMAP.

Link: https://lore.kernel.org/linux-raid/20250707012711.376844-11-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
2025-09-06 17:12:02 +08:00
Yu Kuai 20cecae877 md/raid1: check bitmap before behind write
behind write rely on bitmap, because the number of IO are recorded in
bitmap->behind_writes, and callers rely on bitmap_wait_behind_writes()
to wait for IO to be done.

However, currently callers doesn't check if bitmap is enabeld before
calling into behind methods. Hence if behind write start without bitmap,
readers will not wait for slow write IO to be done and old data can be
read in some corner cases.

Link: https://lore.kernel.org/linux-raid/20250707012711.376844-10-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
2025-09-06 17:11:58 +08:00
Yu Kuai bb74b093c3 md/md-bitmap: handle the case bitmap is not enabled before end_sync()
This case can be handled without knowing internal implementation.

Prepare to introduce CONFIG_MD_BITMAP.

Link: https://lore.kernel.org/linux-raid/20250707012711.376844-9-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
2025-09-06 17:11:54 +08:00
Yu Kuai 5ae58d1500 md/md-bitmap: handle the case bitmap is not enabled before start_sync()
This case can be handled without knowing internal implementation.

Prepare to introduce CONFIG_MD_BITMAP.

Link: https://lore.kernel.org/linux-raid/20250707012711.376844-8-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
2025-09-06 17:11:50 +08:00
Yu Kuai 110332074d md/md-bitmap: add md_bitmap_registered/enabled() helper
There are no functional changes, prepare to handle the case that
mddev->bitmap_ops can be NULL, which is possible after introducing
CONFIG_MD_BITMAP.

Link: https://lore.kernel.org/linux-raid/20250707012711.376844-7-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
2025-09-06 17:11:45 +08:00
Yu Kuai 9c41ead04e md/md-bitmap: add a new parameter 'flush' to bitmap_ops->enabled
The method is only used from raid1/raid10 IO path, to check if write
bio should be pluged, the parameter is always set to true for now,
following patch will use this helper in other context like updating
superblock.

Link: https://lore.kernel.org/linux-raid/20250707012711.376844-6-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
2025-09-06 17:11:42 +08:00
Yu Kuai 9307dbac0e md/md-bitmap: merge md_bitmap_group into bitmap_operations
Now that all bitmap implementations are internal, it doesn't make sense
to export md_bitmap_group anymore.

Link: https://lore.kernel.org/linux-raid/20250707012711.376844-5-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
2025-09-06 17:11:40 +08:00
Yu Kuai e57b225c28 md/md-bitmap: remove the parameter 'init' for bitmap_ops->resize()
It's set to 'false' for all callers, hence it's useless and can be
removed.

Link: https://lore.kernel.org/linux-raid/20250707012711.376844-3-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
2025-09-06 17:11:33 +08:00
Yu Kuai ba28afbd9e blk-mq: fix blk_mq_tags double free while nr_requests grown
In the case user trigger tags grow by queue sysfs attribute nr_requests,
hctx->sched_tags will be freed directly and replaced with a new
allocated tags, see blk_mq_tag_update_depth().

The problem is that hctx->sched_tags is from elevator->et->tags, while
et->tags is still the freed tags, hence later elevator exit will try to
free the tags again, causing kernel panic.

Fix this problem by replacing et->tags with new allocated tags as well.

Noted there are still some long term problems that will require some
refactor to be fixed thoroughly[1].

[1] https://lore.kernel.org/all/20250815080216.410665-1-yukuai1@huaweicloud.com/
Fixes: f5a6604f7a ("block: fix lockdep warning caused by lock dependency in elv_iosched_store")

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/r/20250821060612.1729939-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-09-05 13:52:52 -06:00
Yu Kuai 7d337eef4a blk-mq: fix elevator depth_updated method
Current depth_updated has some problems:

1) depth_updated() will be called for each hctx, while all elevators
will update async_depth for the disk level, this is not related to hctx;
2) In blk_mq_update_nr_requests(), if previous hctx update succeed and
this hctx update failed, q->nr_requests will not be updated, while
async_depth is already updated with new nr_reqeuests in previous
depth_updated();
3) All elevators are using q->nr_requests to calculate async_depth now,
however, q->nr_requests is still the old value when depth_updated() is
called from blk_mq_update_nr_requests();

Those problems are first from error path, then mq-deadline, and recently
for bfq and kyber, fix those problems by:

- pass in request_queue instead of hctx;
- move depth_updated() after q->nr_requests is updated in
  blk_mq_update_nr_requests();
- add depth_updated() call inside init_sched() method to initialize
  async_depth;
- remove init_hctx() method for mq-deadline and bfq that is useless now;

Fixes: 77f1e0a52d ("bfq: update internal depth state when queue depth changes")
Fixes: 39823b47bb ("block/mq-deadline: Fix the tag reservation code")
Fixes: 42e6c6ce03 ("lib/sbitmap: convert shallow_depth from one word to the whole sbitmap")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Li Nan <linan122@huawei.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250821060612.1729939-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-09-05 13:52:52 -06:00
Caleb Sander Mateos 225dc96f35 ublk: inline __ublk_ch_uring_cmd()
ublk_ch_uring_cmd_local() is a thin wrapper around __ublk_ch_uring_cmd()
that copies the ublksrv_io_cmd from user-mapped memory to the stack
using READ_ONCE(). This ublksrv_io_cmd is passed by pointer to
__ublk_ch_uring_cmd() and __ublk_ch_uring_cmd() is a large function
unlikely to be inlined, so __ublk_ch_uring_cmd() will have to load the
ublksrv_io_cmd fields back from the stack. Inline __ublk_ch_uring_cmd()
into ublk_ch_uring_cmd_local() and load the ublksrv_io_cmd fields into
local variables with READ_ONCE(). This allows the compiler to delay
loading the fields until they are needed and choose whether to store
them in registers or on the stack.

Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250808153251.282107-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-09-03 17:35:54 -06:00
Jens Axboe 4dbe13c784 Merge tag 'pull-getgeo' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs into for-6.18/block
Pull struct block_device getgeo changes from Al.

"switching ->getgeo() from struct block_device to struct gendisk

 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>"

* tag 'pull-getgeo' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  block: switch ->getgeo() to struct gendisk
  scsi: switch ->bios_param() to passing gendisk
  scsi: switch scsi_bios_ptable() and scsi_partsize() to gendisk
2025-09-03 15:15:43 -06:00
Qianfeng Rong b0b4518c99 block: use int to store blk_stack_limits() return value
Change the 'ret' variable in blk_stack_limits() from unsigned int to int,
as it needs to store negative value -1.

Storing the negative error codes in unsigned type, or performing equality
comparisons (e.g., ret == -1), doesn't cause an issue at runtime [1] but
can be confusing.  Additionally, assigning negative error codes to unsigned
type may trigger a GCC warning when the -Wsign-conversion flag is enabled.

No effect on runtime.

Link: https://lore.kernel.org/all/x3wogjf6vgpkisdhg3abzrx7v7zktmdnfmqeih5kosszmagqfs@oh3qxrgzkikf/ #1
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Fixes: fe0b393f2c ("block: Correct handling of bottom device misaligment")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250902130930.68317-1-rongqianfeng@vivo.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-09-02 19:19:25 -06:00
Andreas Hindborg 34585dc649 rnull: add soft-irq completion support
rnull currently only supports direct completion. Add option for completing
requests across CPU nodes via soft IRQ or IPI.

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250902-rnull-up-v6-16-v7-17-b5212cc89b98@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-09-02 05:23:56 -06:00
Andreas Hindborg 4ec052841a rust: block: add remote completion to Request
Allow users of rust block device driver API to schedule completion of
requests via `blk_mq_complete_request_remote`.

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250902-rnull-up-v6-16-v7-16-b5212cc89b98@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-09-02 05:23:56 -06:00
Andreas Hindborg bde50e28f7 rust: block: mq: fix spelling in a safety comment
Add code block quotes to a safety comment.

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250902-rnull-up-v6-16-v7-15-b5212cc89b98@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-09-02 05:23:56 -06:00
Andreas Hindborg 90d952fac8 rust: block: add GenDisk private data support
Allow users of the rust block device driver API to install private data in
the `GenDisk` structure.

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250902-rnull-up-v6-16-v7-14-b5212cc89b98@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-09-02 05:23:56 -06:00
Andreas Hindborg d969d504bc rnull: enable configuration via configfs
Allow rust null block devices to be configured and instantiated via
`configfs`.

Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250902-rnull-up-v6-16-v7-13-b5212cc89b98@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-09-02 05:23:56 -06:00
Andreas Hindborg edd8650691 rnull: move driver to separate directory
The rust null block driver is about to gain some additional modules. Rather
than pollute the current directory, move the driver to a subdirectory.

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250902-rnull-up-v6-16-v7-12-b5212cc89b98@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-09-02 05:23:56 -06:00
Andreas Hindborg 19c37c91b4 rust: block: add block related constants
Add a few block subsystem constants to the rust `kernel::block` name space.
This makes it easier to access the constants from rust code.

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250902-rnull-up-v6-16-v7-11-b5212cc89b98@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-09-02 05:23:56 -06:00
Andreas Hindborg 8c32697c4e rust: block: remove trait bound from mq::Request definition
Remove the trait bound `T:Operations` from `mq::Request`. The bound is not
required, so remove it to reduce complexity.

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250902-rnull-up-v6-16-v7-10-b5212cc89b98@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-09-02 05:23:56 -06:00
Andreas Hindborg f52689fcd8 rust: block: remove RawWriter
`RawWriter` is now dead code, so remove it.

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250902-rnull-up-v6-16-v7-9-b5212cc89b98@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-09-02 05:23:56 -06:00
Andreas Hindborg c3a54220b5 rust: block: use NullTerminatedFormatter
Use the new `NullTerminatedFormatter` to write the name of a `GenDisk` to
the name buffer. This new formatter automatically adds a trailing null
marker after the written characters, so we don't need to append that at the
call site any longer.

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250902-rnull-up-v6-16-v7-8-b5212cc89b98@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-09-02 05:23:56 -06:00
Andreas Hindborg f4b72f1558 rust: block: normalize imports for gen_disk.rs
Clean up the import statements in `gen_disk.rs` to make the code easier to
maintain.

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250902-rnull-up-v6-16-v7-7-b5212cc89b98@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-09-02 05:23:56 -06:00
Andreas Hindborg 60e1eeed8b rust: configfs: re-export configfs_attrs from configfs module
Re-export `configfs_attrs` from `configfs` module, so that users can import
the macro from the `configfs` module rather than the root of the `kernel`
crate.

Also update users to import from the new path.

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250902-rnull-up-v6-16-v7-6-b5212cc89b98@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-09-02 05:23:56 -06:00
Andreas Hindborg b1dae0be89 rust: str: introduce kstrtobool function
Add a Rust wrapper for the kernel's `kstrtobool` function that converts
common user inputs into boolean values.

Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250902-rnull-up-v6-16-v7-5-b5212cc89b98@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-09-02 05:23:56 -06:00
Andreas Hindborg cdde7a1951 rust: str: introduce NullTerminatedFormatter
Add `NullTerminatedFormatter`, a formatter that writes a null terminated
string to an array or slice buffer. Because this type needs to manage the
trailing null marker, the existing formatters cannot be used to implement
this type.

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250902-rnull-up-v6-16-v7-4-b5212cc89b98@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-09-02 05:23:56 -06:00
Andreas Hindborg 8c5ac71cf1 rust: str: expose str::{Formatter, RawFormatter} publicly.
rnull is going to make use of `str::Formatter` and `str::RawFormatter`, so
expose them with public visibility.

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250902-rnull-up-v6-16-v7-3-b5212cc89b98@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-09-02 05:23:56 -06:00
Andreas Hindborg 87482d6d91 rust: str: allow str::Formatter to format into &mut [u8].
Improve `Formatter` so that it can write to an array or slice buffer.

Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250902-rnull-up-v6-16-v7-2-b5212cc89b98@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-09-02 05:23:56 -06:00
Andreas Hindborg d5d060d624 rust: str: normalize imports in str.rs
Clean up imports in `str.rs`. This makes future code manipulation more
manageable.

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250902-rnull-up-v6-16-v7-1-b5212cc89b98@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-09-02 05:23:56 -06:00
Yu Kuai 2a06145228 brd: use page reference to protect page lifetime
As discussed [1], hold rcu for copying data from/to page is too heavy,
it's better to protect page with rcu around for page lookup and then
grab a reference to prevent page to be freed by discard.

[1] https://lore.kernel.org/all/eb41cab3-5946-4fe3-a1be-843dd6fca159@kernel.dk/

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250811065628.1829339-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-09-01 08:37:29 -06:00
Li Nan 4c7ef92f6d blk-mq: check kobject state_in_sysfs before deleting in blk_mq_unregister_hctx
In __blk_mq_update_nr_hw_queues() the return value of
blk_mq_sysfs_register_hctxs() is not checked. If sysfs creation for hctx
fails, later changing the number of hw_queues or removing disk will
trigger the following warning:

  kernfs: can not remove 'nr_tags', no directory
  WARNING: CPU: 2 PID: 637 at fs/kernfs/dir.c:1707 kernfs_remove_by_name_ns+0x13f/0x160
  Call Trace:
   remove_files.isra.1+0x38/0xb0
   sysfs_remove_group+0x4d/0x100
   sysfs_remove_groups+0x31/0x60
   __kobject_del+0x23/0xf0
   kobject_del+0x17/0x40
   blk_mq_unregister_hctx+0x5d/0x80
   blk_mq_sysfs_unregister_hctxs+0x94/0xd0
   blk_mq_update_nr_hw_queues+0x124/0x760
   nullb_update_nr_hw_queues+0x71/0xf0 [null_blk]
   nullb_device_submit_queues_store+0x92/0x120 [null_blk]

kobjct_del() was called unconditionally even if sysfs creation failed.
Fix it by checkig the kobject creation statusbefore deleting it.

Fixes: 477e19dedc ("blk-mq: adjust debugfs and sysfs register when updating nr_hw_queues")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250826084854.1030545-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-08-28 19:21:07 -06:00
Andy Shevchenko d4399e6eb2 floppy: Sort headers alphabetically
Sorting headers alphabetically helps locating duplicates, and makes it
easier to figure out where to insert new headers.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250825163545.39303-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-08-25 14:46:42 -06:00
Andy Shevchenko 8e7ee0f6fa floppy: Replace custom SZ_64K constant
There are only two headers using the K_64 custom constant. Moreover,
its usage tangles a code because the constant is defined in the C
file, while users are in the headers. Replace it with well defined
SZ_64K from sizes.h.

Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250825163545.39303-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-08-25 14:46:42 -06:00
Andy Shevchenko d74968780b floppy: Remove unused CROSS_64KB() macro from arch/ code
Since the commit 3d86739c63 ("floppy: always use the track buffer")
the CROSS_64KB() is not used by the driver, remove the leftovers.

Acked-by: Helge Deller <deller@gmx.de> #parisc
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250825163545.39303-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-08-25 14:46:42 -06:00
Bart Van Assche f5d10e6915 block: Move a misplaced comment in queue_wb_lat_store()
blk_mq_quiesce_queue() does not wait for pending I/O to finish. Freezing
a queue waits for pending I/O to finish. Hence move the comment that
refers to waiting for pending I/O above the call that freezes the
request queue. This patch moves this comment back to the position where
it was when this comment was introduced. See also commit c125311d96
("blk-wbt: don't maintain inflight counts if disabled").

Cc: Christoph Hellwig <hch@lst.de>
Cc: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250825151424.1653910-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-08-25 14:43:29 -06:00