Use f2fs_filemap_get_folio() instead of __filemap_get_folio() in:
- f2fs_find_data_folio
- f2fs_write_begin
- f2fs_read_merkle_tree_page
So that, we can trigger fault injection in those places.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Let's use f2fs_filemap_get_folio() instead of f2fs_pagecache_get_page() in
ra_data_block() and move_data_block(), then remove f2fs_pagecache_get_page()
since it has no user.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In add_bio_entry(), adding a page to newly allocated bio should never fail,
let's use bio_add_folio_nofail() instead of bio_add_page() & unnecessary
error handling for cleanup.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
On 32-bit architectures, when GFP_NOFS is used, the file cache for write
operations cannot be allocated from the highmem and CMA.
Since mapping->gfp_mask is set to GFP_HIGHUSER_MOVABLE during inode
allocation, using mapping_gfp_mask(mapping) as the GFP flag of getting file
cache for writing is more efficient for 32-bit architectures.
Additionally, use FGP_NOFS to avoid potential deadlock issues caused by
GFP_FS in GFP_HIGHUSER_MOVABLE
Signed-off-by: Jiucheng Xu <jiucheng.xu@amlogic.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
folio_nr_pages() is a faster helper function to get the number of pages when
NR_PAGES_IN_LARGE_FOLIO is enabled.
Signed-off-by: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Zoned storage devices provide marginal over-capacity space, typically
around 10%, for filesystem level storage control.
By utilizing this extra capacity, we can safely reduce the default
'valid_thresh_ratio' to 80. This action helps to significantly prevent
excessive garbage collection (GC) and the resulting power consumption,
as the filesystem becomes less aggressive about cleaning segments
that still hold a high percentage of valid data.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The current version missed setting one time GC for normal zoned GC
cycle. So, valid threshold control is not working. Need to fix it to
prevent excessive GC for zoned devices.
Fixes: e791d00bd0 ("f2fs: add valid block ratio not to do excessive GC for one time GC")
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Pull block fixes from Jens Axboe:
- Fix dma alignment for PI
- Fix selinux bogosity with nbd, where sendmsg would get rejected
* tag 'block-6.18-20251023' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: require LBA dma_alignment when using PI
nbd: override creds to kernel when calling sock_{send,recv}msg()
Pull io_uring fixes from Jens Axboe:
- Add MAINTAINERS entry for zcrx, mostly so that netdev gets
automatically CC'ed by default on any changes there too.
- Fix for the SQPOLL busy vs work time accounting.
It was using getrusage(), which was both broken from a thread point
of view (we only care about the SQPOLL thread itself), and vastly
overkill as only the systime was used. On top of that, also be a bit
smarter in when it's queried. It used excessive CPU before this
change. Marked for stable as well.
- Fix provided ring buffer auto commit for uring_cmd.
- Fix a few style issues and sparse annotation for a lock.
* tag 'io_uring-6.18-20251023' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix buffer auto-commit for multishot uring_cmd
io_uring: correct __must_hold annotation in io_install_fixed_file
io_uring zcrx: add MAINTAINERS entry
io_uring: Fix code indentation error
io_uring/sqpoll: be smarter on when to update the stime usage
io_uring/sqpoll: switch away from getrusage() for CPU accounting
io_uring: fix incorrect unlikely() usage in io_waitid_prep()
Pull slab fixes from Vlastimil Babka:
- Two fixes for race conditions in obj_exts allocation (Hao Ge)
- Fix for slab accounting imbalance due to deferred slab decativation
(Vlastimil Babka)
* tag 'slab-for-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: Fix obj_ext mistakenly considered NULL due to race condition
slab: fix slab accounting imbalance due to defer_deactivate_slab()
slab: Avoid race on slab->obj_exts in alloc_slab_obj_exts
Pull devicetree fixes from Rob Herring:
- Fix handling of GICv5 ITS MSI properties on platforms with
'msi-parent' as well as a of_node refcounting fix.
This is also preparation for further refactoring in 6.19 to use
common DT parsing of MSI properties.
* tag 'devicetree-fixes-for-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/irq: Export of_msi_xlate() for module usage
of/irq: Fix OF node refcount in of_msi_get_domain()
of/irq: Add msi-parent check to of_msi_xlate()
Pull SoC fixes from Arnd Bergmann:
"The main change this time is an update to the MAINTAINERS file,
listing Krzysztof Kozlowski, Alexandre Belloni, and Linus Walleij as
additional maintainers for the SoC tree, in order to go back to a
group maintainership. Drew Fustini joins as an additional reviewer for
the SoC tree.
Thanks to all of you for volunteering to help out.
On the actual bugfixes, we have a few correctness changes for firmware
drivers (qtee, arm-ffa, scmi) and two devicetree fixes for Raspberry
Pi"
* tag 'soc-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: officially expand maintainership team
firmware: arm_scmi: Fix premature SCMI_XFER_FLAG_IS_RAW clearing in raw mode
firmware: arm_scmi: Skip RAW initialization on failure
include: trace: Fix inflight count helper on failed initialization
firmware: arm_scmi: Account for failed debug initialization
ARM: dts: broadcom: rpi: Switch to V3D firmware clock
arm64: dts: broadcom: bcm2712: Define VGIC interrupt
firmware: arm_ffa: Add support for IMPDEF value in the memory access descriptor
tee: QCOMTEE should depend on ARCH_QCOM
tee: qcom: return -EFAULT instead of -EINVAL if copy_from_user() fails
tee: qcom: prevent potential off by one read
Pull spi fixes from Mark Brown:
"A moderately large collection of device specific changes here, mostly
fixes but also including a few new quirks and device IDs. This is all
fairly routine even for the affected devices"
* tag 'spi-fix-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dt-bindings: spi-rockchip: Add RK3506 compatible
spi: intel-pci: Add support for Intel Wildcat Lake SPI serial flash
spi: intel-pci: Add support for Arrow Lake-H SPI serial flash
spi: intel: Add support for 128M component density
spi: airoha: fix reading/writing of flashes with more than one plane per lun
spi: airoha: switch back to non-dma mode in the case of error
spi: airoha: add support of dual/quad wires spi modes to exec_op() handler
spi: airoha: return an error for continuous mode dirmap creation cases
spi: amlogic: fix spifc build error
spi: cadence-quadspi: Fix pm_runtime unbalance on dma EPROBE_DEFER
spi: spi-nxp-fspi: limit the clock rate for different sample clock source selection
spi: spi-nxp-fspi: add extra delay after dll locked
spi: spi-nxp-fspi: re-config the clock rate when operation require new clock rate
spi: dw-mmio: add error handling for reset_control_deassert()
spi: rockchip-sfc: Fix DMA-API usage
spi: dt-bindings: cadence: add soc-specific compatible strings for zynqmp and versal-net
Pull gpio fixes from Bartosz Golaszewski:
- fix regressions in regmap cache initialization in gpio-104-idio-16
and gpio-pci-idio-16
- configure first 16 GPIO lines of the IDIO-16 as fixed outputs
- fix duplicated IRQ mapping that can lead to an RCU stall in gpio-ljca
- fix printf formatters passed to dev_err() and make failure to set
debounce period non fatal
* tag 'gpio-fixes-for-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: ljca: Fix duplicated IRQ mapping
gpiolib: acpi: Use %pe when passing an error pointer to dev_err()
gpiolib: acpi: Make set debounce errors non fatal
gpio: idio-16: Define fixed direction of the GPIO lines
gpio: regmap: add the .fixed_direction_output configuration parameter
gpio: pci-idio-16: Define maximum valid register address offset
gpio: 104-idio-16: Define maximum valid register address offset
Since Olof moved on from the soc tree maintenance, Arnd has mainly taken
care of the day-to-day activities around the SoC tree by himself, which
is generally not a good setup.
Krzysztof, Linus and Alexandre have volunteered to become co-maintainers
of the SoC tree, with the plan of taking turns to do merges and reviews
to spread the workload. In addition, Drew joins as another reviewer.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
If two competing threads enter alloc_slab_obj_exts(), and the one that
allocates the vector wins the cmpxchg(), the other thread that failed
allocation mistakenly assumes that slab->obj_exts is still empty due to
its own allocation failure. This will then trigger warnings with
CONFIG_MEM_ALLOC_PROFILING_DEBUG checks in the subsequent free path.
Therefore, let's check the result of cmpxchg() to see if marking the
allocation as failed was successful. If it wasn't, check whether the
winning side has succeeded its allocation (it might have been also
marking it as failed) and if yes, return success.
Suggested-by: Harry Yoo <harry.yoo@oracle.com>
Fixes: f7381b9116 ("slab: mark slab->obj_exts allocation failures unconditionally")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Link: https://patch.msgid.link/20251023143313.1327968-1-hao.ge@linux.dev
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Commit 620a50c927 ("io_uring: uring_cmd: add multishot support") added
multishot uring_cmd support with explicit buffer upfront commit via
io_uring_mshot_cmd_post_cqe(). However, the buffer selection path in
io_ring_buffer_select() was auto-committing buffers for non-pollable files,
which conflicts with uring_cmd's explicit upfront commit model.
This way consumes the whole selected buffer immediately, and causes
failure on the following buffer selection.
Fix this by checking uring_cmd to identify operations that handle buffer
commit explicitly, and skip auto-commit for these operations.
Cc: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 620a50c927 ("io_uring: uring_cmd: add multishot support")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mark has been kindly helping fill in when I have been unavailable over
the past several years. He has also put his hand up to take over
linux-next maintenance when I finally decide to stop (which may be some
time yet ;-) ).
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull tracing fixes from Steven Rostedt:
"A couple of fixes for Runtime Verification:
- A bug caused a kernel panic when reading enabled_monitors was
reported.
Change callback functions to always use list_head iterators and by
doing so, fix the wrong pointer that was leading to the panic.
- The rtapp/pagefault monitor relies on the MMU to be present
(pagefaults exist) but that was not enforced via kconfig, leading
to potential build errors on systems without an MMU.
Add that kconfig dependency"
* tag 'trace-rv-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Make rtapp/pagefault monitor depends on CONFIG_MMU
rv: Fully convert enabled_monitors to use list_head as iterator
This pull request contains Broadcom ARM64-based SoCs Device Tree fixes
for 6.18, please pull the following:
- Peter describes the VGIC interrupt line such that KVM can be used on
Raspberry Pi 5 systems.
* tag 'arm-soc/for-6.18/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm2712: Define VGIC interrupt
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
6.18, please pull the following:
- Stefan switches the V3D block to use the firmware clock, rather than
the bare metal clock. This fixes hangs on boot after recent changes to
the V3D driver clocking went in.
* tag 'arm-soc/for-6.18/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: broadcom: rpi: Switch to V3D firmware clock
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arm SCMI fixes for v6.18
This series contains a set of small, focused fixes that address
robustness and lifecycle issues in the Arm SCMI core and debug support,
ensuring safer handling of debug initialization failures, correct flag
management in raw mode, and consistent inflight counter tracking.
Brief summary:
- Fix raw xfer flag clearing
- Skip RAW debug initialization on failure
- Make inflight counter helpers null-safe, preventing crashes if debug
initialization fails
- Account for failed debug initialization globally
There is no functional change for standard SCMI operation, but these
fixes improve stability in debug and raw modes, particularly in error
paths.
* tag 'scmi-fixes-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix premature SCMI_XFER_FLAG_IS_RAW clearing in raw mode
firmware: arm_scmi: Skip RAW initialization on failure
include: trace: Fix inflight count helper on failed initialization
firmware: arm_scmi: Account for failed debug initialization
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arm FF-A fix for v6.18
The FF-A driver was updated to support specification version 1.2 but omitted
support for the 16-byte implementation-defined (IMPDEF) field introduced in
FF-A v1.2 within the Endpoint Memory Access Descriptor (EMAD). This omission
breaks all memory interfaces.
This change updates the EMAD sizing and offset logic to correctly handle the
FF-A v1.2 layout while preserving backward compatibility with older versions.
* tag 'ffa-fix-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Add support for IMPDEF value in the memory access descriptor
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull arm64 fixes from Catalin Marinas:
- Do not make a clean PTE dirty in pte_mkwrite()
The Arm architecture, for backwards compatibility reasons (ARMv8.0
before in-hardware dirty bit management - DBM), uses the PTE_RDONLY
bit to mean !dirty while the PTE_WRITE bit means DBM enabled. The
arm64 pte_mkwrite() simply clears the PTE_RDONLY bit and this
inadvertently makes the PTE pte_hw_dirty(). Most places making a PTE
writable also invoke pte_mkdirty() but do_swap_page() does not and we
end up with dirty, freshly swapped in, writeable pages.
- Do not warn if the destination page is already MTE-tagged in
copy_highpage()
In the majority of the cases, a destination page copied into is
freshly allocated without the PG_mte_tagged flag set. However, the
folio migration may be restarted if __folio_migrate_mapping() failed,
triggering the benign WARN_ON_ONCE().
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mte: Do not warn if the page is already tagged in copy_highpage()
arm64, mm: avoid always making PTE dirty in pte_mkwrite()
Pull networking fixes from Jakub Kicinski:
"Including fixes from can. Slim pickings, I'm guessing people haven't
really started testing.
Current release - new code bugs:
- eth: mlx5e:
- psp: avoid 'accel' NULL pointer dereference
- skip PPHCR register query for FEC histogram if not supported
Previous releases - regressions:
- bonding: update the slave array for broadcast mode
- rtnetlink: re-allow deleting FDB entries in user namespace
- eth: dpaa2: fix the pointer passed to PTR_ALIGN on Tx path
Previous releases - always broken:
- can: drop skb on xmit if device is in listen-only mode
- gro: clear skb_shinfo(skb)->hwtstamps in napi_reuse_skb()
- eth: mlx5e
- RX, fix generating skb from non-linear xdp_buff if program
trims frags
- make devcom init failures non-fatal, fix races with IPSec
Misc:
- some documentation formatting 'fixes'"
* tag 'net-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net/mlx5: Fix IPsec cleanup over MPV device
net/mlx5: Refactor devcom to return NULL on failure
net/mlx5e: Skip PPHCR register query if not supported by the device
net/mlx5: Add PPHCR to PCAM supported registers mask
virtio-net: zero unused hash fields
net: phy: micrel: always set shared->phydev for LAN8814
vsock: fix lock inversion in vsock_assign_transport()
ovpn: use datagram_poll_queue for socket readiness in TCP
espintcp: use datagram_poll_queue for socket readiness
net: datagram: introduce datagram_poll_queue for custom receive queues
net: bonding: fix possible peer notify event loss or dup issue
net: hsr: prevent creation of HSR device with slaves from another netns
sctp: avoid NULL dereference when chunk data buffer is missing
ptp: ocp: Fix typo using index 1 instead of i in SMA initialization loop
net: ravb: Ensure memory write completes before ringing TX doorbell
net: ravb: Enforce descriptor type ordering
net: hibmcge: select FIXED_PHY
net: dlink: use dev_kfree_skb_any instead of dev_kfree_skb
Documentation: networking: ax25: update the mailing list info.
net: gro_cells: fix lock imbalance in gro_cells_receive()
...
Pull ACPI fixes from Rafael Wysocki:
"These fix a fallout of a recent ACPI properties management update and
work around a compiler bug in ACPICA:
- Fix a recent coding mistake causing __acpi_node_get_property_reference()
arguments to be put in an incorrect order (Sunil V L)
- Work around bogus -Wstringop-overread warning on LoongArch since
GCC 11 in ACPICA (Xi Ruoyao)"
* tag 'acpi-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Work around bogus -Wstringop-overread warning since GCC 11
ACPI: property: Fix argument order in __acpi_node_get_property_reference()
Pull power management fixes from Rafael Wysocki:
"These revert a cpuidle menu governor commit leading to a performance
regression, fix an amd-pstate driver regression introduced recently,
and fix new conditional guard definitions for runtime PM.
- Add missing _RET == 0 condition to recently introduced conditional
guard definitions for runtime PM (Rafael Wysocki)
- Revert a cpuidle menu governor change that introduced a serious
performance regression on Chromebooks with Intel Jasper Lake
processors (Rafael Wysocki)
- Fix an amd-pstate driver regression leading to EPP=0 after
hibernation (Mario Limonciello)"
* tag 'pm-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: runtime: Fix conditional guard definitions
Revert "cpuidle: menu: Avoid discarding useful information"
cpufreq/amd-pstate: Fix a regression leading to EPP 0 after hibernate
Pull btrfs fixes from David Sterba:
- in send, fix duplicated rmdir operations when using extrefs
(hardlinks), receive can fail with ENOENT
- fixup of error check when reading extent root in ref-verify and
damaged roots are allowed by mount option (found by smatch)
- fix freeing partially initialized fs info (found by syzkaller)
- fix use-after-free when printing ref_tracking status of delayed
inodes
* tag 'for-6.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: ref-verify: fix IS_ERR() vs NULL check in btrfs_build_ref_tree()
btrfs: fix delayed_node ref_tracker use after free
btrfs: send: fix duplicated rmdir operations when using extrefs
btrfs: directly free partially initialized fs_info in btrfs_check_leaked_roots()
Since commit af92793e52 ("slab: Introduce kmalloc_nolock() and
kfree_nolock().") there's a possibility in alloc_single_from_new_slab()
that we discard the newly allocated slab if we can't spin and we fail to
trylock. As a result we don't perform inc_slabs_node() later in the
function. Instead we perform a deferred deactivate_slab() which can
either put the unacounted slab on partial list, or discard it
immediately while performing dec_slabs_node(). Either way will cause an
accounting imbalance.
Fix this by not marking the slab as frozen, and using free_slab()
instead of deactivate_slab() for non-frozen slabs in
free_deferred_objects(). For CONFIG_SLUB_TINY, that's the only possible
case. By not using discard_slab() we avoid dec_slabs_node().
Fixes: af92793e52 ("slab: Introduce kmalloc_nolock() and kfree_nolock().")
Link: https://patch.msgid.link/20251023-fix-slab-accounting-v2-1-0e62d50986ea@suse.cz
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Currently, during the LAN8814 PTP probe shared->phydev is only set if PTP
clock gets actually set, otherwise the function will return before setting
it.
This is an issue as shared->phydev is unconditionally being used when IRQ
is being handled, especially in lan8814_gpio_process_cap and since it was
not set it will cause a NULL pointer exception and crash the kernel.
So, simply always set shared->phydev to avoid the NULL pointer exception.
Fixes: b3f1a08fcf ("net: phy: micrel: Add support for PTP_PF_EXTTS for lan8814")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://patch.msgid.link/20251021132034.983936-1-robert.marko@sartura.hr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Syzbot reported a potential lock inversion deadlock between
vsock_register_mutex and sk_lock-AF_VSOCK when vsock_linger() is called.
The issue was introduced by commit 687aa0c558 ("vsock: Fix
transport_* TOCTOU") which added vsock_register_mutex locking in
vsock_assign_transport() around the transport->release() call, that can
call vsock_linger(). vsock_assign_transport() can be called with sk_lock
held. vsock_linger() calls sk_wait_event() that temporarily releases and
re-acquires sk_lock. During this window, if another thread hold
vsock_register_mutex while trying to acquire sk_lock, a circular
dependency is created.
Fix this by releasing vsock_register_mutex before calling
transport->release() and vsock_deassign_transport(). This is safe
because we don't need to hold vsock_register_mutex while releasing the
old transport, and we ensure the new transport won't disappear by
obtaining a module reference first via try_module_get().
Reported-by: syzbot+10e35716f8e4929681fa@syzkaller.appspotmail.com
Tested-by: syzbot+10e35716f8e4929681fa@syzkaller.appspotmail.com
Fixes: 687aa0c558 ("vsock: Fix transport_* TOCTOU")
Cc: mhal@rbox.co
Cc: stable@vger.kernel.org
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251021121718.137668-1-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ralf Lici says:
====================
fix poll behaviour for TCP-based tunnel protocols
This patch series introduces a polling function for datagram-style
sockets that operates on custom skb queues, and updates ovpn (the
OpenVPN data-channel offload module) and espintcp (the TCP Encapsulation
of IKE and IPsec Packets implementation) to use it accordingly.
Protocols like the aforementioned one decapsulate packets received over
TCP and deliver userspace-bound data through a separate skb queue, not
the standard sk_receive_queue. Previously, both relied on
datagram_poll(), which would signal readiness based on non-userspace
packets, leading to misleading poll results and unnecessary recv
attempts in userspace.
Patch 1 introduces datagram_poll_queue(), a variant of datagram_poll()
that accepts an explicit receive queue. This builds on the approach
introduced in commit b50b058, which extended other skb-related functions
to support custom queues. Patch 2 and 3 update espintcp_poll() and
ovpn_tcp_poll() respectively to use this helper, ensuring readiness is
only signaled when userspace data is available.
Each patch is self-contained and the ovpn one includes rationale and
lifecycle enforcement where appropriate.
====================
Link: https://patch.msgid.link/20251021100942.195010-1-ralf@mandelbit.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
openvpn TCP encapsulation uses a custom queue to deliver packets to
userspace. Currently it relies on datagram_poll, which checks
sk_receive_queue, leading to false readiness signals when that queue
contains non-userspace packets.
Switch ovpn_tcp_poll to use datagram_poll_queue with the peer's
user_queue, ensuring poll only signals readiness when userspace data is
actually available. Also refactor ovpn_tcp_poll in order to enforce the
assumption we can make on the lifetime of ovpn_sock and peer.
Fixes: 11851cbd60 ("ovpn: implement TCP transport")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20251021100942.195010-4-ralf@mandelbit.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
espintcp uses a custom queue (ike_queue) to deliver packets to
userspace. The polling logic relies on datagram_poll, which checks
sk_receive_queue, which can lead to false readiness signals when that
queue contains non-userspace packets.
Switch espintcp_poll to use datagram_poll_queue with ike_queue, ensuring
poll only signals readiness when userspace data is actually available.
Fixes: e27cca96cd ("xfrm: add espintcp (RFC 8229)")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20251021100942.195010-3-ralf@mandelbit.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some protocols using TCP encapsulation (e.g., espintcp, openvpn) deliver
userspace-bound packets through a custom skb queue rather than the
standard sk_receive_queue.
Introduce datagram_poll_queue that accepts an explicit receive queue,
and convert datagram_poll into a wrapper around datagram_poll_queue.
This allows protocols with custom skb queues to reuse the core polling
logic without relying on sk_receive_queue.
Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: Antonio Quartulli <antonio@openvpn.net>
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20251021100942.195010-2-ralf@mandelbit.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The __must_hold annotation references &req->ctx->uring_lock, but req
is not in scope in io_install_fixed_file. This change updates the
annotation to reference the correct ctx->uring_lock.
improving code clarity.
Fixes: f110ed8498 ("io_uring: split out fixed file installation and removal")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The generic_handle_domain_irq() function resolves the hardware IRQ
internally. The driver performed a duplicative mapping by calling
irq_find_mapping() first, which could lead to an RCU stall.
Delete the redundant irq_find_mapping() call and pass the hardware IRQ
directly to generic_handle_domain_irq().
Fixes: c5a4b6fd31 ("gpio: Add support for Intel LJCA USB GPIO driver")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20251023070231.1305-1-vulab@iscas.ac.cn
[Bartosz: remove unused variable]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Merge an ACPI device properties handling change fixing the order of
__acpi_node_get_property_reference() arguments broken by a recent
update (Sunil V L)
* 'acpi-property':
ACPI: property: Fix argument order in __acpi_node_get_property_reference()
Merge cpuidle and cpufreq fixes for 6.18-rc3:
- Revert a cpuidle menu governor change that introduced a serious
performance regression on Chromebooks with Intel Jasper Lake
processors (Rafael Wysocki)
- Fix an amd-pstate driver regression leading to EPP=0 after
hibernation (Mario Limonciello)
* pm-cpuidle:
Revert "cpuidle: menu: Avoid discarding useful information"
* pm-cpufreq:
cpufreq/amd-pstate: Fix a regression leading to EPP 0 after hibernate
Chao Yu
Jiucheng Xu
Pedro Demarchi Gomes
Daeho Jeong
Linus Torvalds
Arnd Bergmann
Lorenzo Pieralisi
Hao Ge
Ming Lei
Stephen Rothwell
Catalin Marinas
Vlastimil Babka
Jakub Kicinski
Patrisious Haddad
Alexei Lazar
Jason Wang
Robert Marko
Stefano Garzarella
Paolo Abeni
Ralf Lici
Alok Tiwari
Haotian Zhang
Rafael J. Wysocki