Commit Graph
1245870 Commits
Author SHA1 Message Date
Steven Rostedt cf0bc75d1c ring-buffer: Remove jump to out label in ring_buffer_swap_cpu()
[ Upstream commit f115d2b70b ]

The function ring_buffer_swap_cpu() has a bunch of jumps to the label out
that simply returns "ret". There's no reason to jump to a label that
simply returns a value. Just return directly from there.

This goes back to almost the beginning when commit 8aabee573d
("ring-buffer: remove unneeded get_online_cpus") was introduced. That
commit removed a put_online_cpus() from that label, but never updated all
the jumps to it that now no longer needed to do anything but return a
value.

Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250527145753.6b45d840@gandalf.local.home
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: f27bdc4307 ("ring-buffer: Use current_context for safe per-CPU buffer swap")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:07 +02:00
Paolo Abeni 171f95d662 net: harmonize tstats and dstats
commit d3ed6dee73 upstream.

After the blamed commits below, some UDP tunnel use dstats for
accounting. On the xmit path, all the UDP-base tunnels ends up
using iptunnel_xmit_stats() for stats accounting, and the latter
assumes the relevant (tunnel) network device uses tstats.

The end result is some 'funny' stat report for the mentioned UDP
tunnel, e.g. when no packet is actually dropped and a bunch of
packets are transmitted:

gnv2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue \
		state UNKNOWN mode DEFAULT group default qlen 1000
    link/ether ee:7d:09:87:90:ea brd ff:ff:ff:ff:ff:ff
    RX:  bytes packets errors dropped  missed   mcast
         14916      23      0      15       0       0
    TX:  bytes packets errors dropped carrier collsns
             0    1566      0       0       0       0

Address the issue ensuring the same binary layout for the overlapping
fields of dstats and tstats. While this solution is a bit hackish, is
smaller and with no performance pitfall compared to other alternatives
i.e. supporting both dstat and tstat in iptunnel_xmit_stats() or
reverting the blamed commit.

With time we should possibly move all the IP-based tunnel (and virtual
devices) to dstats.

Fixes: c77200c074 ("bareudp: Handle stats using NETDEV_PCPU_STAT_DSTATS.")
Fixes: 6fa6de3022 ("geneve: Handle stats using NETDEV_PCPU_STAT_DSTATS.")
Fixes: be226352e8 ("vxlan: Handle stats using NETDEV_PCPU_STAT_DSTATS.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/2e1c444cf0f63ae472baff29862c4c869be17031.1738432804.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-08-23 14:20:07 +02:00
Christian Brauner 2fdf8b07be binfmt_misc: use exe_file_deny_write_access() for the interpreter clone
commit fa5990ca8f upstream.

For MISC_FMT_OPEN_FILE entries load_misc_binary() clones the
registered interpreter file and denies write access to the clone via
plain deny_write_access(). The clone is installed as
bprm->interpreter and later released by the exec machinery through
exe_file_allow_write_access() which skips the i_writecount increment
for files with FMODE_FSNOTIFY_HSM set.

The deny and allow side can therefore come to different conclusions
when pre-content watches are in play: if a pre-content watch is added
to the interpreter after registration every subsequent exec through
that entry takes a write denial on the clone that is never paired
with a write allowance, driving the interpreter inode's i_writecount
further down with each exec and leaving the interpreter unwritable
even after the entry and all its users are gone.

Take the write denial via exe_file_deny_write_access() so both sides
of the pairing base their decision on the same file mode, and
propagate failure instead of silently ignoring it: an interpreter
that is concurrently open for writing now fails the exec with
ETXTBSY, exactly like an interpreter freshly opened via open_exec()
would.

Link: https://patch.msgid.link/20260710-work-binfmt_misc-locking-v3-2-a162f7cb58d6@kernel.org
Fixes: 0357ef03c9 ("fs: don't block write during exec on pre-content watched files")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-08-23 14:20:07 +02:00
Baul Lee 1fc9f6d2c7 net/x25: fix use-after-free of the socket by its timers
commit 2195424c3d upstream.

The x25 timers are armed with mod_timer() and cancelled with
timer_delete(), so a pending timer holds no reference on the socket and a
cancel does not wait for a callback already running on another CPU.

x25_heartbeat_expiry() also rearms unconditionally, so it can reinstall
sk->sk_timer after __x25_destroy_socket() has passed its cancel point.
The following __sock_put() frees the socket while the timer is still
queued, and the next expiry uses freed memory.  KASAN reports a
slab-use-after-free on the kmalloc-2k object freed by close().

timer_delete_sync() cannot be used here: x25_heartbeat_expiry() and
x25_timer_expiry() both reach the cancels from inside the timer they
would wait on, through __x25_destroy_socket() and x25_disconnect().

Arm the timers with sk_reset_timer() and cancel them with sk_stop_timer()
so that an armed timer owns a reference, and release it in both expiry
handlers.  Rearm the heartbeat only while sk_hashed(sk) is still true,
since __x25_destroy_socket() unlinks the socket before dropping it.  Arm
the deferred destroy timer the same way and drop its reference in
x25_destroy_timer().

Reproduced on net with KASAN, with the heartbeat period shortened so the
window recurs.  With this patch the reproducer no longer triggers a
report and /proc/net/x25 drains.

Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Link: https://patch.msgid.link/20260726220342.47245-1-baul.lee@xbow.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ adjusted context due to `del_timer()` not yet renamed to `timer_delete()` ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-08-23 14:20:07 +02:00
Gao Xiang 74365aef5b erofs: fix EROFS_FS_ZIP_LZMA_DEFAULT_MAX_STREAMS on some UP platforms
[ Upstream commit a64d500b00 ]

CONFIG_NR_CPUS doesn't define on some UP platforms (e.g.  arm), so this
can cause make oldconfig to loop indefinitely when CONFIG_SMP=n:

  $ make ARCH=arm allmodconfig
  $ sed -i "/CONFIG_SMP=y/d" .config
  $ sed -i "/CONFIG_EROFS_FS_ZIP_LZMA_DEFAULT_MAX_STREAMS.*/d" .config

  EROFS LZMA default maximum decompression streams (EROFS_FS_ZIP_LZMA_DEFAULT_MAX_STREAMS) [0] (NEW)
  EROFS LZMA default maximum decompression streams (EROFS_FS_ZIP_LZMA_DEFAULT_MAX_STREAMS) [0] (NEW)
  ...

Let's guard NR_CPUS with SMP instead of using a hardcoded arbitrary CPU
uplimit here, similar to commit a334407810 ("mm: make SPLIT_PTE_PTLOCKS
depend on SMP").

The initial report from SJ Park was for m68k [1] (m68k is the only arch
without NR_CPUS in Kconfig), and that got fixed in commit 1fd495ef09
("m68k: Define NR_CPUS to 1")

Reported-by: SJ Park <sj@kernel.org>
Link: https://lore.kernel.org/all/anuyFHLUGDjZWY4K@XiangdeMacBook-Pro.local/T/#u [1]
Closes: https://lore.kernel.org/r/20260728065447.91511-1-sj@kernel.org
Reported-by: Guenter Roeck <groeck7@gmail.com>
Closes: https://lore.kernel.org/r/87853c96-cc8f-49e6-81b1-02bfe409e372@roeck-us.net
Fixes: c9b47e6b23 ("erofs: cap LZMA stream pool size")
Signed-off-by: Gao Xiang <xiang@kernel.org>
Tested-by: SJ Park <sj@kernel.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:07 +02:00
Jamal Hadi Salim ec5a552f4b net/sched: cls_bpf: reject dev-bound programs bound to a different device
[ Upstream commit 120977e2c0 ]

cls_bpf_prog_from_efd() obtained a SCHED_CLS program via
bpf_prog_get_type_dev() but never verified that a device-bound (offloaded)
program's bound netdev matches the TC netdev the classifier is being
attached to. This let a program loaded with prog_ifindex for device A be
attached via cls_bpf + skip_sw to device B; deleting device A then
destroyed the program's offload state while it was still attached to
device B, triggering a netdevsim WARN (panic with panic_on_warn=1).

Mirror the XDP attach path (net/core/dev.c) and reject the attach with
-EINVAL when a dev-bound program's bound device does not match the
target device.

Fixes: 2b3486bc2d ("bpf: Introduce device-bound XDP programs")
Reported-by: vega@nebusec.ai
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20260809094418.901607-1-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:07 +02:00
Siddharth Vadapalli 551688b410 net: ethernet: ti: am65-cpsw-nuss: Fix port_id extraction from SRC TAG
[ Upstream commit 36a05d2820 ]

On the packet reception path, the ID of the MAC Port on which the packet
was received, is embedded in the RX DMA Descriptor's metadata. The ID is
extracted using the helper function cppi5_desc_get_tags_ids() which fills
in the 16-bit Source Tag into the 'port_id' variable. However, it is only
the lower 8-bits of the 16-bit Source Tag that represent the MAC Port ID,
while the upper 8-bits are Hardware-Reserved and carry an arbitrary value.
With the existing logic, sporadic kernel crash is observed due to the
subsequent driver code accessing out-of-bound memory because of an invalid
port_id.

Hence, fix the port_id extraction logic to use only the lower 8-bits of the
Source Tag as the MAC Port ID.

Fixes: 93a7653031 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Chintan Vankar <c-vankar@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260807111738.2055900-1-s-vadapalli@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:07 +02:00
Uwe Kleine-König f60c71deb1 m68k: Define NR_CPUS to 1
[ Upstream commit 1fd495ef09 ]

This fixes a Kconfig warning

	fs/erofs/Kconfig:137:warning: range is invalid

which originates from EROFS_FS_ZIP_LZMA_DEFAULT_MAX_STREAMS using
NR_CPUS which up to now didn't exist for ARCH=m68k.  All other
architectures define this symbol, so fix the outlier.

[geert] This also fixes:
  - CONFIG_EROFS_FS_ZIP_LZMA_DEFAULT_MAX_STREAMS being set to the
    literal NR_CPUS instead of a number by automatic configs like
    "make allmodconfig" or "make olddefconfig",
  - An infinite loop in manual configs like "make oldconfig" when
    CONFIG_EROFS_FS_ZIP_LZMA_DEFAULT_MAX_STREAMS is not present or
    has an invalid value in your existing .config.

Fixes: c9b47e6b23 ("erofs: cap LZMA stream pool size")
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/20260731094950.1988084-2-ukleinek@kernel.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:06 +02:00
Christoph Hellwig 2930f1b491 m68k: use the coherent DMA code for coldfire without data cache
[ Upstream commit 9e28bf8bdf ]

Coldfire cores configured without a data cache are DMA coherent and
should thus simply use the simple coherent version of dma-direct.

Introduce a new COLDFIRE_COHERENT_DMA Kconfig symbol as a convenient
short hand for such configurations, and a M68K_NONCOHERENT_DMA symbol
for all cases where we need to build non-coherent DMA infrastructure
to simplify the Kconfig and code conditionals.

Not building the non-coherent DMA code slightly reduces the code
size for such configurations.

Numers for m5249evb_defconfig below:

  text	   data	    bss	    dec	    hex	filename
2896158	 401052	  65392	3362602	 334f2a	vmlinux.before
2895166	 400988	  65392	3361546	 334b0a	vmlinux.after

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Stable-dep-of: 1fd495ef09 ("m68k: Define NR_CPUS to 1")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:06 +02:00
Christoph Hellwig 5904c758e0 dma-direct: add a CONFIG_ARCH_HAS_DMA_ALLOC symbol
[ Upstream commit 2c8ed1b960 ]

Instead of using arch_dma_alloc if none of the generic coherent
allocators are used, require the architectures to explicitly opt into
providing it.  This will used to deal with the case of m68knommu and
coldfire where we can't do any coherent allocations whatsoever, and
also makes it clear that arch_dma_alloc is a last resort.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Stable-dep-of: 1fd495ef09 ("m68k: Define NR_CPUS to 1")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:06 +02:00
Zhang Changzhong 19d114b93c net/sched: cls_u32: skip hash tables in u32_bind_class()
[ Upstream commit 6d3724e616 ]

u32_walk() enumerates both struct tc_u_hnode and struct tc_u_knode
through the walker callback. u32_bind_class() unconditionally casts the
passed fh to tc_u_knode and accesses &n->res, so when fh is actually a
tc_u_hnode, which has no tcf_result member, this results in a
slab-out-of-bounds read of res->classid in tc_cls_bind_class().

The issue can be reproduced with the following commands:

    tc qdisc add dev lo root handle 1: hfsc
    tc class add dev lo parent 1: classid 1:1 hfsc sc rate 1000kbit
    tc filter add dev lo parent 1:1 protocol ip prio 1 u32 match u32 0 0 flowid 1:1
    tc class add dev lo parent 1: classid 1:2 hfsc sc rate 2000kbit

Fix this by skipping hash tables via the TC_U32_KEY(handle) check.

Fixes: 07d79fc7d9 ("net_sched: add reverse binding for tc class")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/1786089038-36366-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:06 +02:00
Jamal Hadi Salim 91d55fd1fd net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain
[ Upstream commit f60b396ee1 ]

tcf_action_exec() handles TC_ACT_GOTO_CHAIN by first checking
rcu_access_pointer(a->goto_chain) and then calling
tcf_action_goto_chain_exec(), which does a second, independent
rcu_dereference_bh(a->goto_chain) read and immediately dereferences
chain->filter_chain. A concurrent tcf_action_set_ctrlact() (e.g. the gact
replace path) can clear a->goto_chain between the two reads, so the second
read returns NULL and tcf_action_goto_chain_exec() dereferences NULL.

Fix the race by doing a single rcu_dereference_bh() read of a->goto_chain
in tcf_action_exec(), checking it once for NULL, and passing the resulting
chain pointer into tcf_action_goto_chain_exec(). This turns the split
check/use into a single check/use on one value.

Fixes: ee3bbfe806 ("net/sched: let actions use RCU to access 'goto_chain'")
Reported-by: vega@nebusec.ai
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20260809090928.868186-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:06 +02:00
Victor Nogueira a857e3408b net: sched: Add initial TC error skb drop reasons
[ Upstream commit 4cf24dc893 ]

Continue expanding Daniel's patch by adding new skb drop reasons that
are idiosyncratic to TC.

More specifically:

- SKB_DROP_REASON_TC_COOKIE_ERROR: An error occurred whilst
  processing a tc ext cookie.

- SKB_DROP_REASON_TC_CHAIN_NOTFOUND: tc chain lookup failed.

- SKB_DROP_REASON_TC_RECLASSIFY_LOOP: tc exceeded max reclassify loop
  iterations

Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: f60b396ee1 ("net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:06 +02:00
Victor Nogueira d54e7ec851 net: sched: Move drop_reason to struct tc_skb_cb
[ Upstream commit fb2780721c ]

Move drop_reason from struct tcf_result to skb cb - more specifically to
struct tc_skb_cb. With that, we'll be able to also set the drop reason for
the remaining qdiscs (aside from clsact) that do not have access to
tcf_result when time comes to set the skb drop reason.

Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: f60b396ee1 ("net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:06 +02:00
Yan Zhai 14f679a8d2 packet: add a generic drop reason for receive
[ Upstream commit 2f57dd94bd ]

Commit da37845fdc ("packet: uses kfree_skb() for errors.") switches
from consume_skb to kfree_skb to improve error handling. However, this
could bring a lot of noises when we monitor real packet drops in
kfree_skb[1], because in tpacket_rcv or packet_rcv only packet clones
can be freed, not actual packets.

Adding a generic drop reason to allow distinguish these "clone drops".

[1]: https://lore.kernel.org/netdev/CABWYdi00L+O30Q=Zah28QwZ_5RU-xcxLFUK2Zj08A8MrLk9jzg@mail.gmail.com/
Fixes: da37845fdc ("packet: uses kfree_skb() for errors.")
Suggested-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/ZW4piNbx3IenYnuw@debian.debian
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: f60b396ee1 ("net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:06 +02:00
Jamal Hadi Salim b72e44dc03 net, sched: Fix SKB_NOT_DROPPED_YET splat under debug config
[ Upstream commit 40cb2fdfed ]

Getting the following splat [1] with CONFIG_DEBUG_NET=y and this
reproducer [2]. Problem seems to be that classifiers clear 'struct
tcf_result::drop_reason', thereby triggering the warning in
__kfree_skb_reason() due to reason being 'SKB_NOT_DROPPED_YET' (0).

Fixed by disambiguating a legit error from a verdict with a bogus drop_reason

[1]
WARNING: CPU: 0 PID: 181 at net/core/skbuff.c:1082 kfree_skb_reason+0x38/0x130
Modules linked in:
CPU: 0 PID: 181 Comm: mausezahn Not tainted 6.6.0-rc6-custom-ge43e6d9582e0 #682
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
RIP: 0010:kfree_skb_reason+0x38/0x130
[...]
Call Trace:
 <IRQ>
 __netif_receive_skb_core.constprop.0+0x837/0xdb0
 __netif_receive_skb_one_core+0x3c/0x70
 process_backlog+0x95/0x130
 __napi_poll+0x25/0x1b0
 net_rx_action+0x29b/0x310
 __do_softirq+0xc0/0x29b
 do_softirq+0x43/0x60
 </IRQ>

[2]

ip link add name veth0 type veth peer name veth1
ip link set dev veth0 up
ip link set dev veth1 up
tc qdisc add dev veth1 clsact
tc filter add dev veth1 ingress pref 1 proto all flower dst_mac 00:11:22:33:44:55 action drop
mausezahn veth0 -a own -b 00:11:22:33:44:55 -q -c 1

Ido reported:

  [...] getting the following splat [1] with CONFIG_DEBUG_NET=y and this
  reproducer [2]. Problem seems to be that classifiers clear 'struct
  tcf_result::drop_reason', thereby triggering the warning in
  __kfree_skb_reason() due to reason being 'SKB_NOT_DROPPED_YET' (0). [...]

  [1]
  WARNING: CPU: 0 PID: 181 at net/core/skbuff.c:1082 kfree_skb_reason+0x38/0x130
  Modules linked in:
  CPU: 0 PID: 181 Comm: mausezahn Not tainted 6.6.0-rc6-custom-ge43e6d9582e0 #682
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
  RIP: 0010:kfree_skb_reason+0x38/0x130
  [...]
  Call Trace:
   <IRQ>
   __netif_receive_skb_core.constprop.0+0x837/0xdb0
   __netif_receive_skb_one_core+0x3c/0x70
   process_backlog+0x95/0x130
   __napi_poll+0x25/0x1b0
   net_rx_action+0x29b/0x310
   __do_softirq+0xc0/0x29b
   do_softirq+0x43/0x60
   </IRQ>

  [2]
  #!/bin/bash

  ip link add name veth0 type veth peer name veth1
  ip link set dev veth0 up
  ip link set dev veth1 up
  tc qdisc add dev veth1 clsact
  tc filter add dev veth1 ingress pref 1 proto all flower dst_mac 00:11:22:33:44:55 action drop
  mausezahn veth0 -a own -b 00:11:22:33:44:55 -q -c 1

What happens is that inside most classifiers the tcf_result is copied over
from a filter template e.g. *res = f->res which then implicitly overrides
the prior SKB_DROP_REASON_TC_{INGRESS,EGRESS} default drop code which was
set via sch_handle_{ingress,egress}() for kfree_skb_reason().

Commit text above copied verbatim from Daniel. The general idea of the patch
is not very different from what Ido originally posted but instead done at the
cls_api codepath.

Fixes: 54a59aed39 ("net, sched: Make tc-related drop reason more flexible")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/netdev/ZTjY959R+AFXf3Xy@shredder
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: f60b396ee1 ("net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:06 +02:00
Daniel Borkmann 69c66cf557 net, sched: Add tcf_set_drop_reason for {__,}tcf_classify
[ Upstream commit 39d08b9164 ]

Add an initial user for the newly added tcf_set_drop_reason() helper to set the
drop reason for internal errors leading to TC_ACT_SHOT inside {__,}tcf_classify().

Right now this only adds a very basic SKB_DROP_REASON_TC_ERROR as a generic
fallback indicator to mark drop locations. Where needed, such locations can be
converted to more specific codes, for example, when hitting the reclassification
limit, etc.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Victor Nogueira <victor@mojatatu.com>
Link: https://lore.kernel.org/r/20231009092655.22025-2-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: f60b396ee1 ("net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:06 +02:00
Daniel Borkmann 5599966042 net, sched: Make tc-related drop reason more flexible
[ Upstream commit 54a59aed39 ]

Currently, the kfree_skb_reason() in sch_handle_{ingress,egress}() can only
express a basic SKB_DROP_REASON_TC_INGRESS or SKB_DROP_REASON_TC_EGRESS reason.

Victor kicked-off an initial proposal to make this more flexible by disambiguating
verdict from return code by moving the verdict into struct tcf_result and
letting tcf_classify() return a negative error. If hit, then two new drop
reasons were added in the proposal, that is SKB_DROP_REASON_TC_INGRESS_ERROR
as well as SKB_DROP_REASON_TC_EGRESS_ERROR. Further analysis of the actual
error codes would have required to attach to tcf_classify via kprobe/kretprobe
to more deeply debug skb and the returned error.

In order to make the kfree_skb_reason() in sch_handle_{ingress,egress}() more
extensible, it can be addressed in a more straight forward way, that is: Instead
of placing the verdict into struct tcf_result, we can just put the drop reason
in there, which does not require changes throughout various classful schedulers
given the existing verdict logic can stay as is.

Then, SKB_DROP_REASON_TC_ERROR{,_*} can be added to the enum skb_drop_reason
to disambiguate between an error or an intentional drop. New drop reason error
codes can be added successively to the tc code base.

For internal error locations which have not yet been annotated with a
SKB_DROP_REASON_TC_ERROR{,_*}, the fallback is SKB_DROP_REASON_TC_INGRESS and
SKB_DROP_REASON_TC_EGRESS, respectively. Generic errors could be marked with a
SKB_DROP_REASON_TC_ERROR code until they are converted to more specific ones
if it is found that they would be useful for troubleshooting.

While drop reasons have infrastructure for subsystem specific error codes which
are currently used by mac80211 and ovs, Jakub mentioned that it is preferred
for tc to use the enum skb_drop_reason core codes given it is a better fit and
currently the tooling support is better, too.

With regards to the latter:

  [...] I think Alastair (bpftrace) is working on auto-prettifying enums when
  bpftrace outputs maps. So we can do something like:

  $ bpftrace -e 'tracepoint:skb:kfree_skb { @[args->reason] = count(); }'
  Attaching 1 probe...
  ^C

  @[SKB_DROP_REASON_TC_INGRESS]: 2
  @[SKB_CONSUMED]: 34

  ^^^^^^^^^^^^ names!!

  Auto-magically. [...]

Add a small helper tcf_set_drop_reason() which can be used to set the drop reason
into the tcf_result.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Victor Nogueira <victor@mojatatu.com>
Link: https://lore.kernel.org/netdev/20231006063233.74345d36@kernel.org
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231009092655.22025-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: f60b396ee1 ("net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:06 +02:00
Eric Dumazet 1fc70b3d51 af_packet: Don't send zero-byte data in tpacket_snd().
[ Upstream commit 6bcd76c134 ]

syzbot reported a WARNING in __dev_queue_xmit() triggered via tpacket_snd():

skb_assert_len
WARNING: at include/linux/skbuff.h:2753 skb_assert_len
WARNING: at __dev_queue_xmit+0x21bc/0x4970 net/core/dev.c:4781

Call Trace:
 <TASK>
 dev_queue_xmit include/linux/netdevice.h:3448 [inline]
 packet_xmit+0x243/0x310 net/packet/af_packet.c:276
 tpacket_snd net/packet/af_packet.c:2907 [inline]
 packet_sendmsg+0x28d6/0x4eb0 net/packet/af_packet.c:3134

When sending 0-byte packets via TPACKET ring buffer on devices with no
hard header (e.g. dev->hard_header_len == 0), tpacket_fill_skb()
populates an skb with skb->len == 0 and returns 0. tpacket_snd() then
forwards this empty skb to packet_xmit(), causing __dev_queue_xmit() to
hit skb_assert_len(skb).

Similar checks exist in packet_snd() via commit dc633700f0
("net/af_packet: check len when min_header_len equals to 0") and in
packet_sendmsg_spkt() via commit 6a341729fb ("af_packet: Don't send
zero-byte data in packet_sendmsg_spkt().").

Return -EINVAL in tpacket_fill_skb() when skb->len is zero to reject
zero-length packets in tpacket_snd().

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+30b93b6845b19cc38581@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a79e807.01d0871a.3a0d52.00ac.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260810150447.1220864-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:06 +02:00
Rosen Penev b4ef887bee ASoC: xilinx: formatter_pcm: pass aud_drv_data to irq handlers
[ Upstream commit f12afefb7b ]

The irq handlers take a struct device pointer and call
dev_get_drvdata() to obtain the driver data.  However, the driver
data is only set at the end of probe, after devm_request_irq(),
so an interrupt taken in between causes the handlers to pass a
NULL pointer to readl() and crash.

Pass the private data directly as the devm_request_irq() argument
instead of the device pointer, matching what the handlers expect.

Fixes: 6f6c3c36f0 ("ASoC: xlnx: add pcm formatter platform driver")
Assisted-by: opencode:deepseek-v4-flash-free
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20260806233231.30631-1-rosenp@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:06 +02:00
Chuck Lever 06c2a53604 net/tls: Fail tls_sw_splice_read() after a failed async decrypt
[ Upstream commit 976df67f46 ]

When an async decrypt fails, tls_decrypt_done() records the error in
ctx->async_wait.err and calls tls_err_abort(), which stores it in
sk_err. tls_sw_recvmsg() and tls_sw_read_sock() each read
async_wait.err once they hold the reader lock and fail the call: a
record that did not authenticate breaks the connection.

tls_sw_splice_read() has no such check, and sk_err does not stand in
for one. tls_rx_rec_wait() tests sk_err only inside the loop it
skips whenever a record is already parsed, and the first reader to
reach sock_error() clears it, while async_wait.err persists. A
splice therefore keeps delivering records on a connection that
recvmsg() and read_sock() refuse to read.

Read async_wait.err in tls_sw_splice_read() as the other two readers
do.

Fixes: f314bfee81 ("tls: rx: return the already-copied data on crypto error")
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Chuck Lever <cel@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260806-tls-splice-crypto-fix-v1-1-a2624005a286@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:05 +02:00
Wei Fang e451e20adb net: packet: fix wrong transport_header when sending VLAN-tagged frame
[ Upstream commit 01fdecc048 ]

In packet_parse_headers(), when processing a VLAN-tagged frame,
skb_set_network_header() is called to advance network_header past the
VLAN tag to the inner protocol header. skb_probe_transport_header() is
then called with skb->protocol still set to the outer VLAN EtherType
(e.g. ETH_P_8021Q), while nhoff (derived from skb_network_offset())
already points past the VLAN tag to the inner protocol header.

In __skb_flow_dissect(), proto is initialized to ETH_P_8021Q and nhoff
points past the VLAN tag. When the dissector hits case ETH_P_8021Q, it
reads a struct vlan_hdr at nhoff via __skb_header_pointer(), but that
offset contains the inner protocol header (e.g. an IP header). The bytes
are misinterpreted as a VLAN header, yielding a garbage encapsulated
EtherType that matches no known protocol. The dissector returns false,
so skb_probe_transport_header() never calls skb_set_transport_header(),
leaving transport_header at its uninitialized sentinel value (~0U).

Move skb_probe_transport_header() to before skb_set_network_header(). At
the time skb_probe_transport_header() is called, network_header still
points to the VLAN header, so nhoff correctly points to the VLAN header.
The flow dissector can then parse the VLAN header, extract the inner
EtherType, and advance nhoff to the inner protocol header, allowing
transport_header to be set correctly.

Fixes: dfed913e8b ("net/af_packet: add VLAN support for AF_PACKET SOCK_RAW GSO")
Assisted-by: WChat:claude-opus-4-8
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260807063405.688780-2-wei.fang@oss.nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:05 +02:00
Eric Dumazet 28afc87bd8 macvlan: inherit needed_headroom and needed_tailroom from lowerdev
[ Upstream commit cef51860be ]

macvlan devices inherit hard_header_len from lowerdev during macvlan_init(),
but leave needed_headroom and needed_tailroom set to 0.

When the underlying lowerdev requires extra headroom or tailroom for
headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or veth with rx
headroom), upper layers calculating packet headroom and tailroom fail to
reserve sufficient space.

This can result in reallocation overhead, skb headroom underflows, or KASAN
slab-use-after-free crashes when dev_hard_header() / macvlan_hard_header()
prepends header data or when lower devices append tailroom.

Fix this by:
1. Inheriting needed_headroom and needed_tailroom from lowerdev in macvlan_init().
2. Propagating needed_headroom and needed_tailroom updates to attached macvlans
   in macvlan_device_event() when receiving NETDEV_FEAT_CHANGE events.

Fixes: b863ceb7dd ("[NET]: Add macvlan driver")
Reported-by: Tangxin Xie <xietangxin@h-partners.com>
Closes: https://lore.kernel.org/netdev/CANn89i+1EW-sFNK8xoq98gMbPCeLS7e=+rs9gHfLg5Wj+4x0sw@mail.gmail.com/T/#m16adf0ff972cbfd8066c3a8e656e75eaeb12d021
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@kylinos.cn>
Link: https://patch.msgid.link/20260806141938.287660-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:05 +02:00
Eric Dumazet f3c17ff65f ipvlan: inherit needed_headroom and needed_tailroom from phy_dev
[ Upstream commit e16e960d55 ]

ipvlan devices inherit hard_header_len from phy_dev during ipvlan_init(),
but leave needed_headroom and needed_tailroom set to 0.

When the underlying phy_dev (or stacked lower device) requires extra headroom
or tailroom for headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or
veth with rx headroom), upper layers calculating packet headroom and tailroom
fail to reserve sufficient space.

This can result in reallocation overhead, skb headroom underflows, or KASAN
slab-use-after-free crashes when dev_hard_header() / ipvlan_hard_header()
prepends header data or when lower devices append tailroom.

Fix this by:
1. Inheriting needed_headroom and needed_tailroom from phy_dev in ipvlan_init().
2. Propagating needed_headroom and needed_tailroom updates to attached ipvlans
   in ipvlan_device_event() when receiving NETDEV_FEAT_CHANGE events.

Fixes: 2ad7bf3638 ("ipvlan: Initial check-in of the IPVLAN driver.")
Reported-by: syzbot+1f9fd0f4b601cf88d6e6@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a720a21.40259c87.584f4.04bb.GAE@google.com/T/#u
Reported-by: Tangxin Xie <xietangxin@h-partners.com>
Closes: https://lore.kernel.org/netdev/CANn89i+1EW-sFNK8xoq98gMbPCeLS7e=+rs9gHfLg5Wj+4x0sw@mail.gmail.com/T/#mcc6307f115e500df23ea2980d5669fe95f20b6b4
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@kylinos.cn>
Link: https://patch.msgid.link/20260806103857.115541-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:05 +02:00
Florian Westphal ccc33e1b2e netfilter: ipset: let destroy callbacks adjust ext mem size
[ Upstream commit 490937b88c ]

For bitmap this change makes no difference, because destructors are
called synchronously.

List type however calls them via call_rcu() so accounting decrement can
happen after list_set_flush() set ext_size to 0.

'set->elements = 0' can be removed for the same reason in the list type
case, it calls 'set->elements--' for each element.

Fixes: 9e41f26a50 ("netfilter: ipset: Count non-static extension memory for userspace")
Suggested-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:05 +02:00
Florian Westphal eada630d0a netfilter: ipset: fix list type element drift bug
[ Upstream commit 4cbd69766b ]

If list_set_uadd() calls list_set_replace() to swap an expired entry,
the element count remains the same, therefore the increment must be elided.

Fixes: 702b71e7c6 ("netfilter: ipset: Add element count to all set types header")
Link: https://sashiko.dev/#/patchset/20260806101947.2802-1-fw%40strlen.de
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:05 +02:00
Jérémy Jean d37917e7be netfilter: flowtable: publish GC-visible tuple last
[ Upstream commit 2014ac62df ]

nf_flow_table_iterate() only treats original-direction tuple nodes as
owning entries. Publishing the original node first lets GC observe and
free a flow while flow_offload_add() is still inserting the reply node.
Publish the reply node first and the original node last so GC never
sees a partially installed flow.

KASAN can trigger slab-use-after-free read and write reports in the
flowtable/rhashtable path (rht_deferred_worker, jhash, flow_offload_del,
flow_offload_lookup, etc.).

Fixes: ac2a66665e ("netfilter: add generic flow table infrastructure")
Signed-off-by: Jérémy Jean <Jeremy.Jean@oss.cyber.gouv.fr>
Assisted-by: Codex:gpt-5
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:05 +02:00
Alexey Velichayshiy 17c132e18c netfilter: nf_tables_offload: suppress WARN_ON_ONCE for ENOMEM in abort path
[ Upstream commit d02f592064 ]

In nft_flow_rule_offload_abort(), WARN_ON_ONCE(err) is triggered on every
error during rollback, including -ENOMEM. Memory allocation failures are
expected under low-memory conditions and do not indicate a kernel bug.

Trace for example:
nft_flow_offload_chain() // FLOW_BLOCK_BIND
  nft_flow_block_chain()
    nft_chain_offload_cmd()
      nft_block_offload_cmd()
        ->ndo_setup_tc()
        nsim_setup_tc()
          flow_block_cb_setup_simple()
            flow_block_cb_alloc() // fails to -ENOMEM

The warning was reproduced on the 5.10 stable kernel under memory pressure
via fault injection, but the underlying bug exists in mainline as well,
as demonstrated by the ENOMEM trace above. The following splat was
triggered during nf_tables transaction processing:

WARNING: CPU: 0 PID: 8567 at net/netfilter/nf_tables_offload.c:532 nft_flow_rule_offload_abort net/netfilter/nf_tables_offload.c:532 [inline]
WARNING: CPU: 0 PID: 8567 at net/netfilter/nf_tables_offload.c:532 nft_flow_rule_offload_commit+0x971/0xcd0 net/netfilter/nf_tables_offload.c:591
Modules linked in:
CPU: 0 PID: 8567 Comm: syz-executor.0 Not tainted 5.10.260-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:nft_flow_rule_offload_abort net/netfilter/nf_tables_offload.c:532 [inline]
RIP: 0010:nft_flow_rule_offload_commit+0x971/0xcd0 net/netfilter/nf_tables_offload.c:591
Call Trace:
 nf_tables_commit+0x3bd/0x4bd0 net/netfilter/nf_tables_api.c:8604
 nfnetlink_rcv_batch+0xb1e/0x1f20 net/netfilter/nfnetlink.c:509
 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:579 [inline]
 nfnetlink_rcv+0x3b3/0x420 net/netfilter/nfnetlink.c:597
 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
 netlink_unicast+0x6cd/0xa00 net/netfilter/af_netlink.c:1340
 netlink_sendmsg+0x906/0xe10 net/netfilter/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:651 [inline]
 __sock_sendmsg+0x155/0x190 net/socket.c:663
 ____sys_sendmsg+0x705/0x870 net/socket.c:2379
 ___sys_sendmsg+0x100/0x170 net/socket.c:2433
 __sys_sendmsg+0xe9/0x1c0 net/socket.c:2462
 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x67/0xd1

Change the condition to WARN_ON_ONCE(err && err != -ENOMEM) so that
warnings are only emitted for unexpected errors. This aligns with the
common kernel practice of not warning on -ENOMEM.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: 63b48c73ff ("netfilter: nf_tables_offload: undo updates if transaction fails")
Signed-off-by: Alexey Velichayshiy <a.velichayshiy@ispras.ru>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:05 +02:00
Xiang Mei (Microsoft) b891e7a6bb netfilter: ipset: fix refcount race between list:set GC and swap
[ Upstream commit 0c88868271 ]

__ip_set_put_byindex() resolved the index to a set pointer under RCU,
then took ip_set_ref_lock in __ip_set_put() to decrement set->ref.
ip_set_swap() holds that same lock while swapping both the ip_set_list
slots and the two sets' ref counters, so it can interleave between the
dereference and the lock acquisition, leaving the caller to decrement a
set whose reference already moved to the other index and hit
BUG_ON(set->ref == 0). list_set_gc() reaches this from timer softirq,
which the nfnl mutex does not serialize against swap: an expiring
list:set member calls list_set_del() -> ip_set_put_byindex() while
IPSET_CMD_SWAP runs on the referenced sets.

Resolve the index and decrement under ip_set_ref_lock, as ip_set_swap()
already does, keeping the refcount tied to the index rather than to a
stale set pointer.

  kernel BUG at net/netfilter/ipset/ip_set_core.c:685!
  Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
  RIP: 0010:ip_set_put_byindex (net/netfilter/ipset/ip_set_core.c:870)
  Call Trace:
   <IRQ>
   list_set_del (net/netfilter/ipset/ip_set_list_set.c:159)
   set_cleanup_entries (net/netfilter/ipset/ip_set_list_set.c:181)
   list_set_gc (net/netfilter/ipset/ip_set_list_set.c:578)
   call_timer_fn (kernel/time/timer.c:1748)
   __run_timers (kernel/time/timer.c:1799 kernel/time/timer.c:2374)
   run_timer_softirq (kernel/time/timer.c:2405)
   </IRQ>
  Kernel panic - not syncing: Fatal exception in interrupt

Fixes: 9076aea765 ("netfilter: ipset: Increase the number of maximal sets automatically")
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:05 +02:00
Herbert Xu 9f4a626420 crypto: ccm - Set rfc4309 maxauthsize from child
[ Upstream commit 438f4896f7 ]

Set the maxauthsize of rfc4309 using that of the child algorithm.

Fixes: 4a49b499df ("[CRYPTO] ccm: Added CCM mode")
Reported-by: Seohyeon Maeng <bioloidgp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:05 +02:00
Jon Hunter 4f1dde17b1 arm64: tegra: Add EL2 virtual timer interrupt for Tegra194
[ Upstream commit a7c28483fd ]

Commit d87773de9e ("clocksource/drivers/arm_arch_timer: Default to EL2
virtual timer when running VHE") updated the ARM arch timer driver to
use the virtual timer by default if the CPU is running at EL2 with VHE
enabled. If the CPU is running at EL2 with VHE enabled but there is no
interrupt provided for the virtual timer, then the following warning is
displayed:

 arch_timer: [Firmware Bug]: VHE-capable CPU without EL2 virtual timer
  interrupt

This warning is observed on Tegra194 platforms. Tegra194 SoC includes
NVIDIA Carmel ARM v8.2 CPUs and support an EL2 virtual timer. Fix the
above warning by adding the PPI for the EL2 virtual timer interrupt for
Tegra194.

Fixes: 5425fb15d8 ("arm64: tegra: Add Tegra194 chip device tree")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-08-23 14:20:05 +02:00
Lorenzo Stoakes (ARM) f3a874a903 mm/huge_memory: fix huge_zero_pfn race
commit 33192a26cd upstream.

Patch series "mm/huge_memory: fix huge_zero_pfn race", v2.

There is a subtle race in the reference-counted huge_zero_folio
implementation.

The fast path atomic logic fails to account for the fact that the shrinker
(which drops the final huge_zero_refcount pin) can overwrite huge_zero_pfn
with the ~0UL sentinel value in shrink_huge_zero_folio_scan() after a
racing get_huge_zero_folio() installed a valid value there.

This results in huge_zero_folio being correctly set but huge_zero_pfn
being set incorrectly and thus is_huge_zero_pfn() and consequently
is_huge_zero_pmd() will misidentify the huge zero folio as being an
ordinary THP folio.

This can result in the huge zero folio being split and otherwise treated
incorrectly.

The solution to this is very subtle as there is an atomic fast path, and
thus ordering in weakly ordered architectures has to be treated very
carefully.

The first commit fixes the issue by introducing a spinlock around
huge_zero_[pfn, folio, refcount] write, with careful consideration paid to
load/store ordering in the fast path.  It is placed first and kept as
small as possible so that it can be backported on its own.

The second commit is a pure cleanup which reworks the
CONFIG_PERSISTENT_HUGE_ZERO_FOLIO logic to better separate the persistent
logic from the dynamically allocated one.


This patch (of 2):

If !CONFIG_PERSISTENT_HUGE_ZERO_FOLIO, the huge_zero_folio is refcounted
by huge_zero_refcount and returned by mm_get_huge_zero_folio().

When the caller is done with the huge zero page, its reference count is
decremented.  Only a shrinker can set the reference count to zero.

A race can unfortunately occur between a shrinker decrementing the
reference count to zero and a concurrent page fault.

This is because shrink_huge_zero_folio_scan() might, if very unlucky, be
preempted between setting huge_zero_refcount to zero and writing an
invalid value.

During this time get_huge_zero_folio() could write to huge_zero_pfn before
shrink_huge_zero_folio_scan() resumes.

In this event the huge zero folio will be persistently misidentified
causing the THP code path to be entered inappropriately for the huge zero
folio:

                CPU 0                                   CPU 1
=======================================|=================================
shrink_huge_zero_folio_scan()          |
   atomic_cmpxchg() sets refcount to 0 |
   xchg() sets huge_zero_folio to NULL | get_huge_zero_folio()
                 |                     |    atomic_inc_not_zero() -> zero
      preempted for a long time        |    Allocate new huge zero folio
                 |                     |    Write valid huge_zero_folio
                 v                     |    Write valid huge_zero_pfn
  Overwrite huge_zero_pfn with ~0UL   <--- Invalid overwrite!

This results in is_huge_zero_pfn() and is_huge_zero_pmd() incorrectly
returning false for a huge zero page which could result in issues like the
huge zero folio being incorrectly split.

Note that the issue is with huge_zero_pfn not huge_zero_folio, as
get_huge_zero_folio() uses cmpxchg() gated on huge_zero_folio being NULL
with a retry loop and shrink_huge_zero_folio_scan() uses xchg() to set
huge_zero_folio.

Fix the issue by introducing a spinlock, huge_zero_lock, to prevent
concurrent write of huge_zero_folio, huge_zero_pfn and huge_zero_refcount.

There needs to be significant care taken here to ensure correctness:

The fast path in get_huge_zero_folio() uses atomic_inc_not_zero(), which
is outside of the critical section, and means huge zero allocation is
gated on zero huge_zero_refcount.

The fast path doesn't use huge_zero_lock, so the critical section is
irrelevant to it.

So invariants are required - huge_zero_refcount MUST:

* Only be set in the huge_zero_lock critical section to ensure
  serialisation of huge_zero_pfn, huge_zero_folio and huge_zero_refcount
  writes.

* Be set non-zero only AFTER huge_zero_[pfn, folio] are set to valid values
  so installation of the huge zero folio on read page fault ensures
  concurrent is_huge_zero_*() calls correctly identify the huge zero folio.

* Be set zero only BEFORE huge_zero_[pfn, folio] are set to NULL and ~0UL
  respectively, and atomically.

Establish these by:

* Only setting huge_zero_refcount to zero or an absolute value in the
  huge_zero_lock critical section in get_huge_zero_folio() and
  shrink_huge_zero_folio_scan(), and always updating atomically there
  and elsewhere.

* Using atomic_set_release(&huge_zero_refcount) in get_huge_zero_folio()
  after huge_zero_[pfn, folio] are set. This is paired with
  atomic_inc_not_zero() to ensure atomic_inc_not_zero() only observes a
  non-zero value if huge_zero_[pfn, folio] are set.

* Using atomic_cmpxchg() in shrink_huge_zero_folio_scan() (as before) to
  ensure that it is set zero only when equal to 1 and set atomically.

* atomic_cmpxchg() being fully ordered ensures this is done prior to
  huge_zero_[folio, pfn] being set to NULL and ~0UL respectively.

Eliminate the retry loop in get_huge_zero_folio() as the atomic_cmpxchg()
in shrink_huge_zero_folio_scan() is now performed under the lock, and
replace with an equally locked atomic_inc() to set the reference count
should the caller be raced on huge zero folio installation.

folio_put() naturally implies a full memory barrier so its ordering is
maintained correctly.

The huge zero folio also cannot be released except when the shrinker does
so as it is non-LRU and non-rmappable.

Note that only the huge zero shrinker (via shrink_huge_zero_folio_scan())
can actually set huge_zero_refcount to zero, which is the count of mm's
which have at least one huge zero folio installed plus one shrinker pin.

Additionally convert a BUG_ON() to a VM_WARN_ON_ONCE().

Link: https://lore.kernel.org/20260730-fix-refcounted-huge-zero-v2-0-c5d8a41b317f@kernel.org
Link: https://lore.kernel.org/20260730-fix-refcounted-huge-zero-v2-1-c5d8a41b317f@kernel.org
Fixes: 3b77e8c8cd ("mm/thp: make is_huge_zero_pmd() safe and quicker")
Signed-off-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Reported-by: Hengbin Zhang <uqbarz@gmail.com>
Closes: https://lore.kernel.org/linux-mm/20260727154001.4102341-1-uqbarz@gmail.com/
Suggested-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kiryl Shutsemau <kas@kernel.org>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ adapted folio API (`huge_zero_folio`, `folio_pfn`, `folio_put`) to pre-6.11 page naming (`huge_zero_page`, `page_to_pfn`, `__free_pages`) ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-08-23 14:20:05 +02:00
Paolo Bonzini 28afde1edb KVM: SVM: Serialize accesses to the owner and mirror list with separate lock
[ Upstream commit 1d78d33275 ]

Interaction between KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM and
KVM_CAP_VM_COPY_ENC_CONTEXT_FROM can cause two separate issues:

- in sev_migrate_from(), when the destination KVM is a mirror, the mirror
  entry is moved from the source's list to the owner's mirror_vms list,
  without holding the owner's lock unlike other writers of the owner's
  mirror list (sev_vm_copy_enc_context_from(), sev_vm_destroy()).
  A concurrent COPY or destroy can race with sev_migrate_from() and
  corrupt the list.

- In sev_vm_destroy(), the *owner* is still active and could receive
  concurrently a KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM that causes
  sev->enc_context_owner to change.  In this case the incorrect VM
  receives kvm_put_kvm().

The second issue needs particular care because the owner could disappear
altogether (even though the race window is impossibly small) between
reading it and locking it.  There is thus no way to perform the checks
under the owner lock without putting struct kvm under SLAB_TYPESAFE_BY_RCU
(which would allow kvm_get_kvm_safe() under RCU critical section).

It is much simpler to just use a global lock, since the critical
sections are so small and the new lock is always a leaf lock.

Fixes: b2125513df ("KVM: SEV: Allow SEV intra-host migration of VM with mirrors")
Cc: stable@vger.kernel.org
Reported-by: Shen Yongchao <grayhat@foxmail.com>
Link: https://lore.kernel.org/kvm/tencent_625C0F42824E542C72B34733392AF2C49709@qq.com/
Link: https://lore.kernel.org/kvm/tencent_DDC4E4352EC91CAC05A9A8F4E55E8C96730A@qq.com/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[ Replaced `to_kvm_sev_info(src->enc_context_owner)` with `&to_kvm_svm(src->enc_context_owner)->sev_info` since that helper doesn't exist, and adjusted context for absent `vmsa_features`/`ghcb_version` fields. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-08-23 14:20:05 +02:00
Lorenzo Stoakes (ARM) 76df4edf7d mm/ptdump: always stabilise against page table freeing using init_mm
[ Upstream commit 27c32e5538 ]

Previous commits have established the invariant that kernel page table
freeing is performed while an mmap read lock on init_mm is held, which
fixes races between ptdump and kernel page table freeing over init_mm.

However, x86 and arm64 can perform a ptdump over an mm other than init_mm
via ptdump_walk_pgd() and since kernel memory ranges are shared across
non-kernel mm's, this means that the race still exists for these cases.

Fix this by acquiring a nested mmap write lock for init_mm in
ptdump_walk_pgd().

This is safe as we take this after mmap write locking the mm, and nothing
acquires the init_mm lock first before locking an arbitrary mm, so no
deadlock is possible.

Also update walk_page_range_debug() to assert that init_mm is write
locked, add a comment explaining why and remove some redundant code, and
eliminate the unnecessary and confusing invocation of
walk_kernel_page_table_range().

We can safely remove the non-NULL check for walk.mm, as the mmap lock
asserts would NULL pointer deref if it was (and of course no callers do
this).

The first point at which ptdump can race kernel page table freeing is
commit b6bdb7517c ("mm/vmalloc: add interfaces to free unmapped page
table"), so we target this in the Fixes tag.

Link: https://lore.kernel.org/20260723-series-vmap-race-fix-v6-4-8cc77dcc0018@kernel.org
Fixes: b6bdb7517c ("mm/vmalloc: add interfaces to free unmapped page table")
Signed-off-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Kiryl Shutsemau <kas@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Borah, Chaitanya Kumar" <chaitanya.kumar.borah@intel.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Carlier <devnexen@gmail.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-08-23 14:20:05 +02:00
Lorenzo Stoakes (ARM) 8d7f560f4b mm/vmalloc: acquire init_mm lock on huge vmap to avoid ptdump UAF
[ Upstream commit 26444eb714 ]

Patch series "mm: fix UAF caused by race between ptdump and vmap pgtable
freeing", v6.

Kernel page table walkers fall into two broad categories - those ranges
where no exclusion is required via walk_kernel_page_table_range_lockless()
and those where exclusion is required via walk_kernel_page_table_range()
or walk_page_range_debug().

The former category is used only by arm64 arch code operating on ranges it
both wholly owns and does not concurrently write.

The latter category consists of kernel page table walkers operating on
ranges that are wholly owned (but which need exclusion against concurrent
writers).

The lock used for exclusion is the mmap lock, and for kernel ranges this
is the mmap lock on init_mm.

ptdump is a special case being both the only user of
walk_page_range_debug(), and the only case in which it walks ranges it
does not own.

This presents a problem, as page tables may be freed under ptdump.  And
indeed there is a use-after-free bug in the kernel as a result, which this
series addresses.

vmap promotes page tables to huge leaf entries where possible, freeing the
lower page table when it does.  It does this with no meaningful locks held
against concurrent ptdump walks.

As a result, use-after-free can currently occur.  This series addresses
the issue by having the vmap huge promotion logic acquire the mmap read
lock while both setting the huge page table entry and freeing the prior
leaf page table.

The ptdump code already acquires the mmap write lock, so by doing so we
ensure that the ptdump walker only ever observes either the huge page
table entry or the existing page table entry, and nothing is freed
underneath it.

A mitigation for this issue was already applied for arm64 in commit
fa93b45fd3 ("arm64: Enable vmalloc-huge with ptdump"), which this series
has to deal with carefully.

This mitigation resolves the issue by acquiring the mmap read lock on
init_mm on vmap page table free if a ptdump is in progress.

However the fix in this series would cause a deadlock if we were to simply
apply it for arm64 without also reverting the change.

This is because vmap may acquire the read lock before ptdump attempts to
acquire the write lock, which then gets queued, and rwsem starvation rules
mean that the (unacknowledged) nested mmap read lock in the arm64 code
would also block, meaning the original read lock is never released and
thus deadlock.

This series works around this by #ifndef CONFIG_ARM64'ing the mmap read
lock in vmap logic, then partially reverting commit fa93b45fd3 ("arm64:
Enable vmalloc-huge with ptdump"), keeping the enablement of huge vmap
support, and removing the ifdeffery with the partial revert patch.

There are related issues that are also addressed in this series:

* x86 page attribute logic, specifically Change Page Attributes (CPA),
  implements a feature whereby huge ranges can be collapsed into huge leaf
  entries. This can similarly cause a UAF when done in parallel with a
  ptdump walk, so similarly acquire the init_mm mmap lock to avoid this.

* The CPA logic allows concurrent page table manipulation and CPA
  collapse, meaning the former risks accessing a page table the latter
  frees. Fix this by acquiring mmap write lock on init_mm across the
  whole CPA collapse operation and read lock on the page table
  manipulation.

* x86 and arm64 permit walks of non-kernel mm's (both allowing efi mm
  walks, and in x86's case arbitrary mm's), so we ensure kernel mappings
  remain stable by locking the init_mm as well as the mm being walked.

The ordering of patches is established for both strict dependencies (the
arm64 partial revert in particular has to be done after the vmap changes)
and logical ones (the non-kernel mm fix only makes sense once the vmap/CPA
fixes are in place).

This patch (of 3):

Currently there is a nasty race between ptdump and vmap when attempting to
map a huge P4D, PUD or PMD entry:

* ptdump walks kernel page table ranges it doesn't own.

* When vmap maps ranges it tries to promotes existing ones to huge page
  tables in vmap_try_huge_[p4d,pud,pmd]() at P4D, PUD and PMD level,
  freeing the lower page table in [p4d,pud,pmd]_free_[pud,pmd,pte]_page()
  when it succeeds.

Both of these things can happen at the same time and as a result ptdump
can access a freed page table, resulting in a use-after-free and memory
corruption.

This is possible because while ptdump_walk_pgd() holds both the mem
hotplug lock and the mmap write lock before invoking
walk_page_range_debug(), vmap takes no relevant locks at all.

Fix this by holding the mmap read lock in vmap_try_huge_*() when freeing
page tables.

The read lock is sufficient: ptdump is the only walker that must be
excluded and it holds the mmap write lock.  Other holders of the read lock
may run concurrently, but each exclusively owns the range it operates on
and cannot reach the page tables freed here.

We also hold the lock while assigning the huge page table entry, which
means page table walkers observe only the huge or non-huge page table
entry.

We use a trylock to prevent ptdump from blocking vmap making forward
progress.  This is fine because it's an optimisation in any case, and thus
the vmap can safely proceed regardless.

All other kernel page table walkers that touch vmalloc ranges either
exclusively own the memory walked or acquire the mmap lock, so this
correctly excludes those walkers.

One wrinkle here is commit fa93b45fd3 ("arm64: Enable vmalloc-huge with
ptdump"), which addresses the issue for arm64 only by explicitly acquiring
the mmap read lock on kernel page table freeing should a concurrent ptdump
be in progress.

This is problematic as vmap may acquire the mmap read lock prior to ptdump
attempting to acquire an mmap write lock, leading to a deadlock when the
mmap read lock is slept upon on page table freeing due to rwsem
anti-starvation.

We work around this by predicating the mmap lock being taken on
!CONFIG_ARM64 for the time being.

With this patch applied, a follow up will partially revert commit
fa93b45fd3 ("arm64: Enable vmalloc-huge with ptdump") and at that stage
remove the arm64 ifdeffery.

We also update walk_page_range_debug() to assert the mmap write lock
unconditionally and update the comment here to reflect this change.

The issue has existed as long as ptdump was available and vmap freed page
tables when promoting to a huge leaf entry, that is, since commit
b6bdb7517c ("mm/vmalloc: add interfaces to free unmapped page table")
for huge ioremap, and commit 121e6f3258 ("mm/vmalloc: hugepage vmalloc
mappings") for huge vmalloc.

Since the former is the earlier of the two we choose that for our Fixes
tag.

We also define a guard class for mmap_read_trylock() so we can use
cleanup.h to make the scope handling cleaner in the implementation.

This patch is based on work by David Carlier (linked), with gratitude!

Link: https://lore.kernel.org/20260723-series-vmap-race-fix-v6-0-8cc77dcc0018@kernel.org
Link: https://lore.kernel.org/20260723-series-vmap-race-fix-v6-1-8cc77dcc0018@kernel.org
Fixes: b6bdb7517c ("mm/vmalloc: add interfaces to free unmapped page table")
Signed-off-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Reported-by: syzbot+fd95a72470f5a44e464c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6a287988.39669fcc.33b062.00a0.GAE@google.com/T/
Link: https://lore.kernel.org/linux-mm/20260706203128.162335-1-devnexen@gmail.com/
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Kiryl Shutsemau <kas@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Borah, Chaitanya Kumar" <chaitanya.kumar.borah@intel.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ added the missing `DEFINE_GUARD(mmap_read_lock, ...)` base class and dropped the `page_owner.h` include context absent from this tree ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-08-23 14:20:04 +02:00
Lorenzo Stoakes 56a45fdbe5 mm/pagewalk: split walk_page_range_novma() into kernel/user parts
[ Upstream commit 96d81e4766 ]

walk_page_range_novma() is rather confusing - it supports two modes, one
used often, the other used only for debugging.

The first mode is the common case of traversal of kernel page tables,
which is what nearly all callers use this for.

Secondly it provides an unusual debugging interface that allows for the
traversal of page tables in a userland range of memory even for that
memory which is not described by a VMA.

It is far from certain that such page tables should even exist, but
perhaps this is precisely why it is useful as a debugging mechanism.

As a result, this is utilised by ptdump only.  Historically, things were
reversed - ptdump was the only user, and other parts of the kernel evolved
to use the kernel page table walking here.

Since we have some complicated and confusing locking rules for the novma
case, it makes sense to separate the two usages into their own functions.

Doing this also provide self-documentation as to the intent of the caller
- are they doing something rather unusual or are they simply doing a
standard kernel page table walk?

We therefore establish two separate functions - walk_page_range_debug()
for this single usage, and walk_kernel_page_table_range() for general
kernel page table walking.

The walk_page_range_debug() function is currently used to traverse both
userland and kernel mappings, so we maintain this and in the case of
kernel mappings being traversed, we have walk_page_range_debug() invoke
walk_kernel_page_table_range() internally.

We additionally make walk_page_range_debug() internal to mm.

Link: https://lkml.kernel.org/r/20250605135104.90720-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Barry Song <baohua@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 26444eb714 ("mm/vmalloc: acquire init_mm lock on huge vmap to avoid ptdump UAF")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-08-23 14:20:04 +02:00
Pierre-Eric Pelloux-Prayer 898a44d811 drm/amdgpu: move debug_vm handling to amdgpu_cs_parser_fini
[ Upstream commit d8726ef115 ]

The commit referenced below restarts the CS if the validation is
still in progress. When debug_vm is enabled, all BOs from the CS
are invalidated so we will hit an infinite loop.

To avoid that, defer BO invalidation to amdgpu_cs_parser_fini.

Fixes: 59720bfd8c ("drm/amdgpu: restart the CS if some parts of the VM are still invalidated")
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8c990ee9da)
Cc: stable@vger.kernel.org
[ adjusted `adev->debug_vm` back to the global `amdgpu_vm_debug` param and restored the `adev` argument to `amdgpu_vm_bo_invalidate()` calls ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-08-23 14:20:04 +02:00
Yang Wang 9efc767335 drm/amd/pm: fix pptable use-after-free
[ Upstream commit bb493058c3 ]

amdgpu_dpm_get_pp_table() returns a pointer to a driver-owned power table
after dropping adev->pm.mutex. The sysfs path then copies from that pointer.
A concurrent pp_table write can replace and free the allocation during the
copy, causing a use-after-free.

Change the DPM interface to copy into caller-provided storage while the mutex
is held. Keep the size-only query for attribute discovery without exposing
the driver-owned pointer.

Fixes: 1684d3ba48 ("drm/amd/amdgpu: change pptable output format from ASCII to binary")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f6eed7acfd)
Cc: stable@vger.kernel.org
[ kept 6.18's existing `if (!pp_funcs->get_pp_table) return 0;` guard instead of upstream's SR-IOV/SCPM `-EOPNOTSUPP` guard and dropped the `default_attr_update()` hunk whose `pp_table` branch doesn't exist yet ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-08-23 14:20:04 +02:00
Yang Wang 50cfece0b1 drm/amd/pm: fix torn gpu metrics reads
[ Upstream commit 048f4541b7 ]

amdgpu_dpm_get_gpu_metrics() returns a pointer to the shared metrics cache
after dropping adev->pm.mutex. The sysfs path then copies from that pointer.
Another reader can refresh the cache in place during the copy and return a
snapshot containing data from two generations.

Pass caller-provided storage through the DPM interface and copy the metrics
while the mutex is held. This keeps the cache pointer private and makes each
sysfs read observe one complete sample.

Fixes: 25c933b1c4 ("drm/amd/powerplay: add new sysfs interface for retrieving gpu metrics(V2)")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 862333bb48)
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-08-23 14:20:04 +02:00
Tu Nguyen 584a5d96b6 can: rcar_canfd: change the initializing flow for clocks and resets
[ Upstream commit bef9004c5b ]

Testing CANFD on RZ/G3E shows that many registers do not reset to their
initial values with the current flow of deasserting resets first and then
enabling clocks.

Based on the HW manual, clocks should be supplied first and the
resets deasserted afterward.

 section 7.4.3 Procedure for Activating Modules: RZ/G2L
 section 4.4.9.3 Procedure for Starting up Units: RZ/G3E

So, update the order of the initializing flow for resets and clocks
to match the hardware manual, resetting all CANFD registers to their
initial values. Also update rcar_canfd_global_deinit() to assert
resets before disabling clocks, so the teardown path mirrors the new
init ordering.

Fixes: 76e9353a80 ("can: rcar_canfd: Add support for RZ/G2L family")
Signed-off-by: Tu Nguyen <tu.nguyen.xg@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20260625135216.130450-1-biju.das.jz@bp.renesas.com
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-08-23 14:20:04 +02:00
Jonas Gorski 441e9c3328 i2c: iproc: reset bus after timeout if START_BUSY is stuck
[ Upstream commit 98f2e9e6d6 ]

If a transaction times out, the START_BUSY signal can stay up, and
subsequent transactaction attempts will fail as the bus is still
considered busy.

I can easily trigger this by attempting to read from an address with no
device, e.g. when running i2cdetect. After the first read times out, all
subsequent read attempts return busy.

To get to a working state again, the controller needs to be reset to
clear the START_BUSY signal. So check for START_BUSY still asserted on a
timeout, and do reset in case it is,

This is also done by the original non-upstream iproc-smbus driver
implementation [1].

Works around situations like:

    bcm-iproc-2c 1803b000.i2c: transaction timed out
    bcm-iproc-2c 1803b000.i2c: bus is busy
    bcm-iproc-2c 1803b000.i2c: bus is busy
    bcm-iproc-2c 1803b000.i2c: bus is busy
    bcm-iproc-2c 1803b000.i2c: bus is busy
    bcm-iproc-2c 1803b000.i2c: bus is busy
    ...

where the bus never recovers after a timeout.

[1] https://github.com/opencomputeproject/onie/blob/master/patches/kernel/3.2.69/driver-iproc-smbus.patch

Fixes: e6e5dd3566 ("i2c: iproc: Add Broadcom iProc I2C Driver")
Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de>
Cc: <stable@vger.kernel.org> # v4.0+
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260717085507.34209-1-jonas.gorski@bisdn.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-08-23 14:20:04 +02:00
Wolfram Sang b95dd3225e i2c: bcm-iproc: remove printout on handled timeouts
[ Upstream commit 796e2c2601 ]

I2C and SMBus timeouts are not something the user needs to be informed
about on controller level. The client driver may know if that really is
a problem and give more detailed information to the user. The controller
should just pass this information upwards. Remove the printout.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Stable-dep-of: 98f2e9e6d6 ("i2c: iproc: reset bus after timeout if START_BUSY is stuck")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-08-23 14:20:04 +02:00
Eric Dumazet bb01c51950 vxlan: use pskb_network_may_pull() for transmit path header pulls
[ Upstream commit b9553558b4 ]

In vxlan_xmit(), arp_reduce(), and vxlan_mdb_entry_skb_get(), pskb_may_pull() was
being called to verify the availability of network layer headers (ARP, IPv6/ND,
IP/IPv6 MDB keys).

However, during transmit skb->data points to the MAC header, so skb_network_offset(skb)
is ETH_HLEN (14 bytes). Using pskb_may_pull(skb, len) only checks len bytes from skb->data
rather than skb_network_offset(skb) + len, which can leave part of the network header
in non-linear frags.

Replace these remaining pskb_may_pull() calls with pskb_network_may_pull() to properly
account for the MAC header offset.

Fixes: e4f67addf1 ("add DOVE extensions for VXLAN")
Fixes: f564f45c45 ("vxlan: add ipv6 proxy support")
Fixes: 0f83e69f44 ("vxlan: Add MDB data path support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260723144249.759100-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-08-23 14:20:04 +02:00
Guillaume Nault 1db9041e91 vxlan: Handle stats using NETDEV_PCPU_STAT_DSTATS.
[ Upstream commit be226352e8 ]

VXLAN uses the TSTATS infrastructure (dev_sw_netstats_*()) for RX and
TX packet counters. It also uses the device core stats
(dev_core_stats_*()) for RX and TX drops.

Let's consolidate that using the DSTATS infrastructure, which can
handle both packet counters and packet drops. Statistics that don't
fit DSTATS are still updated atomically with DEV_STATS_INC().

While there, convert the "len" variable of vxlan_encap_bypass() to
unsigned int, to respect the types of skb->len and
dev_dstats_[rt]x_add().

Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/145558b184b3cda77911ca5682b6eb83c3ffed8e.1733313925.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: b9553558b4 ("vxlan: use pskb_network_may_pull() for transmit path header pulls")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-08-23 14:20:04 +02:00
Guillaume Nault 72496cf871 vrf: Make pcpu_dstats update functions available to other modules.
[ Upstream commit 18eabadd73 ]

Currently vrf is the only module that uses NETDEV_PCPU_STAT_DSTATS.
In order to make this kind of statistics available to other modules,
we need to define the update functions in netdevice.h.

Therefore, let's define dev_dstats_*() functions for RX and TX packet
updates (packets, bytes and drops). Use these new functions in vrf.c
instead of vrf_rx_stats() and the other manual counter updates.

While there, update the type of the "len" variables to "unsigned int",
so that there're aligned with both skb->len and the new dstats update
functions.

Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/d7a552ee382c79f4854e7fcc224cf176cd21150d.1733313925.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: b9553558b4 ("vxlan: use pskb_network_may_pull() for transmit path header pulls")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-08-23 14:20:04 +02:00
Jeremy Kerr 7806ff0e8a net: core,vrf: Change pcpu_dstat fields to u64_stats_t
[ Upstream commit fa59dc2f6f ]

The pcpu_sw_netstats and pcpu_lstats structs both contain a set of
u64_stats_t fields for individual stats, but pcpu_dstats uses u64s
instead.

Make this consistent by using u64_stats_t across all stats types.

The per-cpu dstats are only used by the vrf driver at present, so update
that driver as part of this change.

Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240607-dstats-v3-1-cc781fe116f7@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: b9553558b4 ("vxlan: use pskb_network_may_pull() for transmit path header pulls")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-08-23 14:20:04 +02:00
Breno Leitao 73e7998c33 vxlan: Do not alloc tstats manually
[ Upstream commit e28c5efc31 ]

With commit 34d21de99c ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of in this driver.

With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.

Remove the allocation in the vxlan driver and leverage the network
core allocation instead.

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/20240311112437.3813987-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: b9553558b4 ("vxlan: use pskb_network_may_pull() for transmit path header pulls")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-08-23 14:20:03 +02:00
Dawid Osuchowski bbd63ba796 ice: fix VF interrupts cleanup
[ Upstream commit fb09688209 ]

When a virtual function sends an IRQ map command, the PF will set up
interrupts according to that request. However, because these interrupts are
never reset, the next time Virtual Function initializes, the interrupts are
still enabled for a given VF, which leads to performance degradation in
certain cases due to interrupts being unexpectedly enabled and thus causing
interrupt floods.

Cc: stable@vger.kernel.org
Fixes: 1071a8358a ("ice: Implement virtchnl commands for AVF support")
Suggested-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Patryk Holda <patryk.holda@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
[ changed the file path for the `ice_vf_ena_rxq_interrupt` hunk from `ice/virt/queues.c` to `ice_virtchnl.c`, which predates the upstream directory split ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-08-23 14:20:03 +02:00
Christian Brauner dd9ba32169 binfmt_misc: restore write access when removing an entry
[ Upstream commit db1856ea91 ]

Registering an entry with the MISC_FMT_OPEN_FILE flag opens the
interpreter via open_exec() which denies write access to it for as
long as the entry exists. Removing the entry closes the interpreter
file via filp_close() but never restores write access, leaving the
inode's i_writecount permanently negative. Opening the interpreter
for writing keeps failing with ETXTBSY long after the entry is gone
until the inode is evicted from the inode cache.

Commit 90f601b497 ("binfmt_misc: restore write access before
closing files opened by open_exec()") fixed the same imbalance in the
error path of bm_register_write() but the actual removal path has
been leaking the write denial since the introduction of the flag.

Restore write access in put_binfmt_handler() before closing the
interpreter file.

Link: https://patch.msgid.link/20260710-work-binfmt_misc-locking-v3-1-a162f7cb58d6@kernel.org
Fixes: 948b701a60 ("binfmt_misc: add persistent opened binary handler for containers")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-08-23 14:20:03 +02:00
Amir Goldstein bf5ed2ef5c fs: don't block write during exec on pre-content watched files
[ Upstream commit 0357ef03c9 ]

Commit 2a010c4128 ("fs: don't block i_writecount during exec") removed
the legacy behavior of getting ETXTBSY on attempt to open and executable
file for write while it is being executed.

This commit was reverted because an application that depends on this
legacy behavior was broken by the change.

We need to allow HSM writing into executable files while executed to
fill their content on-the-fly.

To that end, disable the ETXTBSY legacy behavior for files that are
watched by pre-content events.

This change is not expected to cause regressions with existing systems
which do not have any pre-content event listeners.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241128142532.465176-1-amir73il@gmail.com
Stable-dep-of: db1856ea91 ("binfmt_misc: restore write access when removing an entry")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-08-23 14:20:03 +02:00