MIN_PERF and MAX_PERF are optional CPPC controls. DESIRED_PERF is also
optional with CPPC2 when autonomous selection is supported.
The cppc-cpufreq target callbacks populate both limits for every request
without checking whether the controls are implemented. cppc_set_perf()
consequently passes NULL register descriptors to cpc_write(). The writes
fail width validation and their return values are ignored, so the failed
access paths are repeated on every target request. An autonomous-only
platform can take the same path for DESIRED_PERF.
Check that each performance control is supported before calling
cpc_write().
Fixes: ea3db45ae4 ("cpufreq: cppc: Update MIN_PERF/MAX_PERF in target callbacks")
Reviewed-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20260724104042.1481804-1-christian.loehle@arm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge amd-pstate fixes for 7.2 (7/22/26) from Mario Limonciello:
"* Fix a case blocking amd-pstate from binding
when lowest nonlinear freq == minimum freq
* Stop trying to bind in guests"
* tag 'amd-pstate-v7.2-2026-07-22' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Prevent the driver from loading on unsupported hardware
cpufreq/amd-pstate: Loosen requirement on lowest nonlinear frequency != min freq
This requirement was introduced by commit 8f8b42c1fc ("cpufreq:
amd-pstate: optimize the initial frequency values verification")
specifically to aid in debugging BIOS issues with invalid _CPC tables
on some older systems.
This requirement is too tight for new systems though as some systems
actually have lowest nonlinear frequency identical to minimum
frequency. Allow that combo to work.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20260715174318.18235-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <superm1@kernel.org>
Commit 16a03c71bb ("cpufreq: schedutil: Merge initialization code of
sg_cpu in single loop") merged the per-CPU initialization and the
utilization-hook registration into a single loop in sugov_start().
For a shared cpufreq policy this re-introduces the race originally fixed
by commit ab2f7cf141 ("cpufreq: schedutil: Fix sugov_start() versus
sugov_update_shared() race").
The scheduler's util path reaches the hook under RCU-sched and never takes
policy->rwsem, so the rwsem held across sugov_start() cannot serialize the
two. Once the first CPU's hook is published, sugov_update_shared() may run
and, via sugov_next_freq_shared(), read/write each sibling sugov_cpu
(iowait_boost, util, bw_min, ...) concurrently with the memset() still
initializing them, with no lock common to both sides: the update side holds
sg_policy->update_lock while the init side holds only policy->rwsem, which
the scheduler's util path never takes.
The walk only accesses scalar members, never a pointer like ->sg_policy,
so it does not crash today; it merely uses stale (or zero on first start)
values that skew the frequency selection and tracepoints. It is still a
genuine data race, and a latent crash once any pointer member is
dereferenced there.
Restore the two-phase approach: initialize all per-CPU structures first,
and only then publish the per-CPU utilization update hooks.
Fixes: 16a03c71bb ("cpufreq: schedutil: Merge initialization code of sg_cpu in single loop")
Cc: stable@vger.kernel.org
Signed-off-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/20260716115159.848403-1-zhongqiu.han@oss.qualcomm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cppc_cpufreq_update_perf_limits() reads policy->min and policy->max
without holding the policy lock. The cpufreq core updates those fields
with separate stores, so a reader can observe the old minimum together
with the new maximum and construct MIN_PERF greater than MAX_PERF.
Read both fields once and, if the lockless snapshot is inconsistent,
reduce the minimum to the observed maximum. This matches the conservative
correction used by cpufreq_driver_resolve_freq() and ensures that CPPC
never receives an inverted limit pair.
Fixes: ea3db45ae4 ("cpufreq: cppc: Update MIN_PERF/MAX_PERF in target callbacks")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/20260722093825.1030594-3-christian.loehle@arm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI 6.2, Section 6.2.11.2 permits _CPC registers to use flexible
address spaces. Linux advertises that capability through _OSC and parses
the address space of each _CPC register independently. A directly
accessible DESIRED_PERF combined with PCC-backed limits is therefore a
valid configuration.
cppc_allow_fast_switch() only checks DESIRED_PERF, although the fast-switch
callback passes DESIRED_PERF, MIN_PERF and MAX_PERF to cppc_set_perf(). If
a limit uses PCC, that function can sleep while called from scheduler
context.
Allow fast switching only when every supported control used by the
callback has an address space already accepted for fast access. Check the
complete policy domain, including initialized CPUs that are currently
offline and may later become the policy's managing CPU.
Fixes: 658fa7b1c4 ("ACPI: CPPC: Add cppc_get_perf() API to read performance controls")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/20260722093825.1030594-2-christian.loehle@arm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull RISC-V fixes from Paul Walmsley:
- Call flush_cache_vmap() after populating new vmemmap pages, on all
architectures. This avoids spurious faults on RISC-V
microarchitectures that cache PTEs marked as non-present
- Disable LTO for the vDSO to prevent the compiler from eliding
functions that are used, but which don't appear to be
- Fix an issue with libgcc's unwinder and signal handlers by dropping
an unnecessary CFI landing pad instruction in __vdso_rt_sigreturn
(similar to what was done on ARM64)
- Avoid reading uninitialized memory under certain conditions in
hwprobe_get_cpus()
- Save some memory and I$ when CONFIG_DYNAMIC_FTRACE=n by avoiding our
four-byte function alignment requirement in that case
- Avoid clang warnings about null-pointer arithmetic in the I/O-port
accessor macros (inb, outb, etc.) by ifdeffing them out when
!CONFIG_HAS_IOPORT
- Make the build of the lazy TLB flushing code in the vmalloc path
depend on CONFIG_64BIT and CONFIG_MMU (since those platforms are the
only ones that use it)
* tag 'riscv-for-linus-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: hwprobe: Avoid uninitialized read in hwprobe_get_cpus()
arch/riscv: vdso: remove CFI landing pad from rt_sigreturn
riscv: vdso: Do not use LTO for the vDSO
riscv: io: avoid null-pointer arithmetic in PIO helpers
riscv: Gate FUNCTION_ALIGNMENT_4B on DYNAMIC_FTRACE
mm/sparse-vmemmap: flush_cache_vmap() after hotplugging vmemmap
riscv: mm: Make mark_new_valid_map() stuff depend on 64BIT && MMU
Pull block fixes from Jens Axboe:
- Fixes for the dio bounce buffer helpers: correct the alignment of
bounced dio read bios to avoid a double unpin, handle huge zero
folios in bio_free_folios(), and don't warn on the larger-order folio
attempts in the greedy allocation path.
- Try a slab allocation in bio_alloc_bioset() before falling back to
the mempool, restoring the previous behavior for non-sleeping
allocations from a cache-enabled bioset.
- Serialize elevator changes for the same queue using the writer lock.
- Fix a race in blk_time_get_ns() where a task preempted between
setting PF_BLOCK_TS and the cached-timestamp reload could return 0.
- blk-cgroup fix for leaks and the online flag on a radix_tree_insert()
failure in blkg_create().
- Free the copied pages when blk_rq_map_kern() fails after
blk_rq_append_bio() rejects the bio.
- Remove manually added partitions on loop device detach, fixing dead
partition devices left behind and a subsequent LOOP_CONFIGURE -EBUSY
- Bound the AIX partition lvd scan to the sector that was actually
read.
- Show the block operation in error injection rules (Jackie)
* tag 'block-7.2-20260717' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: fix aligning of bounced dio read bios
block: handle huge zero folios in bio_free_folios
block: try slab allocation in bio_alloc_bioset() before mempool
block: show operation in error injection rules
block: serialize elevator changes for the same queue using a writer lock
block: free copied pages when blk_rq_map_kern() fails
block: do not warn when doing greedy allocation in folio_alloc_greedy()
partitions: aix: bound the lvd scan to one sector
blk-cgroup: fix leaks and online flag on radix_tree_insert failure
loop: remove manually added partitions on detach
block: fix race in blk_time_get_ns() returning 0
Pull io_uring fixes from Jens Axboe:
- Fix a use-after-free in the bpf-ops struct_ops path, where the same
io_uring_bpf_ops map could be registered more than once.
- Fix the deferred iovec free for the provided-buffer grow path, which
could leave the caller with a dangling iovec and result in repeated
frees. Follow-up to the earlier fix in this series.
- Zero-check the unused addr3/pad2 SQE fields for unlinkat
* tag 'io_uring-7.2-20260717' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/bpf-ops: reject re-registration of an already-bound ops
io_uring/fs: check unused sqe fields for unlinkat
io_uring/kbuf: free the replaced iovec after a successful grow
Pull spi fixes from Mark Brown:
"A couple of fairly routine driver fixes, nothing too remarkable"
* tag 'spi-fix-v7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cadence-quadspi: Fix indirect write timeout when DMA read mode is enabled
spi: dw-dma: Wait for controller idle before completing Tx
Pull regulator fix from Mark Brown:
"One straightforward driver fix for some incorrectly described
bitfields in the ltc3676 driver"
* tag 'regulator-fix-v7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: ltc3676: Fix incorrect IRQSTAT bit offsets
Pull x86 fixes from Ingo Molnar:
- Reject too long acpi_rsdp= boot parameter values (Thorsten Blum)
- Validate console=uart8250 baud rate to fix early boot hang (Thorsten
Blum)
- Remove dead Makefile rule (Ethan Nelson-Moore)
* tag 'x86-urgent-2026-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Validate console=uart8250 baud rate to fix early boot hang
x86/boot: Reject too long acpi_rsdp= values
x86/cpu: Remove Makefile rule for removed UMC CPU support
Pull s390 fixes from Vasily Gorbik:
- Fix checksum lib on machines without the vector facility where the
non-vector fallback made csum_partial() calculate the checksum from
address 0 instead of the provided buffer
- Fix cpum_cf perf event initialization missing speculation barrier for
user controlled event numbers used as generic event array indexes
* tag 's390-7.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/perf_cpum_cf: Add missing array_index_nospec() to __hw_perf_event_init()
s390/checksum: Fix csum_partial() without vector facility
Pull ARC fixes from Vineet Gupta:
- Misc fixes and config updates
* tag 'arc-7.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: configs: Drop redundant I2C_DESIGNWARE_PLATFORM
arc: validate DT CPU map strings before parsing them
Pull SCSI fixes from James Bottomley:
"The biggest core change is the reliable wake fix for scsi_schedule_eh
which is used by both libata and libsas which could otherwise cause
error handler hangs due to rare races.
All other fixes are in drivers (well except the export symbol removal)
the next biggest being the target PR-OUT transportid parsing fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: hpsa: Fix DMA mapping leak on IOACCEL2 reset path
scsi: elx: efct: Fix refcount leak in efct_hw_io_abort()
scsi: elx: efct: Fix I/O leak on unsupported additional CDB
scsi: core: wake eh reliably when using scsi_schedule_eh
scsi: target: core: Fix iSCSI ISID use-after-free in REGISTER AND MOVE
scsi: target: Bound PR-OUT TransportID parsing to the received buffer
scsi: lpfc: Fix memory leak in lpfc_sli4_driver_resource_setup()
scsi: sg: Report request-table problems when any status is set
scsi: ufs: core: tracing: Do not dereference pointers in TP_printk()
scsi: bfa: Reduce kernel stack usage in bfa_fcs_lport_fdmi_build_portattr_block()
scsi: xen: scsiback: Free the command tag on the TMR submit-failure path
scsi: xen: scsiback: Free unsubmitted command instead of double-putting it
scsi: core: Remove export for scsi_device_from_queue()
Pull i2c fixes from Andi Shyti:
"A handful of small fixes for host controller drivers.
One patch also adds Wolfram Sang to CREDITS after more than a decade
of work on I2C"
* tag 'i2c-fixes-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux:
i2c: mediatek: fix WRRD for SoCs without auto_restart option
i2c: mlxbf: Fix use-after-free in mlxbf_i2c_init_resource()
i2c: spacemit: fix spurious IRQ handling returning IRQ_HANDLED
i2c: imx: fix locked bus on SMBus block-read of 0 (IRQ)
i2c: imx: fix locked bus on SMBus block-read of 0 (atomic)
CREDITS: Add Wolfram Sang
Pull smb server fixes from Steve French:
"ksmbd server fixes, mostly addressing malformed SMB request
handling and connection/session lifetime issues, including
two information-disclosure or memory-safety bugs in the SMB2
request/response paths.
- validate FILE_ALLOCATION_INFORMATION before block rounding to
prevent a client-controlled overflow from truncating a file.
- pin connections while asynchronous oplock and lease-break
notifications are pending.
- initialize compound SMB2 READ alignment padding, preventing
disclosure of uninitialized heap bytes.
- release the allocated alternate-stream xattr name after rename.
- size multichannel binding session-key buffers for the largest
permitted key, avoiding a stack buffer overflow.
- remove a disconnecting connection's channels from every session,
including channels whose binding state has since changed.
- serialize binding preauthentication-session lookup and update
against its teardown.
- check that every compound request element contains StructureSize2
before reading it"
* tag 'v7.2-rc3-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: validate compound request size before reading StructureSize2
ksmbd: lock the binding preauth session in smb3_preauth_hash_rsp
ksmbd: remove stale channels from all sessions on teardown
ksmbd: fix stack buffer overflow in multichannel session-key copy
ksmbd: fix memory leak of xattr_stream_name in smb2_rename()
ksmbd: zero the smb2_read alignment tail to avoid an infoleak
ksmbd: pin conn during async oplock break notification
ksmbd: fix integer overflow in set_file_allocation_info()
Pull ata fixes from Damien Le Moal:
- Interrupt initialization and handling fixes for the Designware
ahci_dwc driver (Rosen)
- Avoid possible infinite loop when scanning completion in the
Designware ahci_dwc driver (Rosen)
* tag 'ata-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: sata_dwc_460ex: fix infinite loop in NCQ tag completion bit-scanning
ata: sata_dwc_460ex: fix clear_interrupt_bit() clearing all pending interrupts
ata: sata_dwc_460ex: use platform_get_irq()
ata: sata_dwc_460ex: enable SATA interrupts only after IRQ handler is registered
[Why]
After unifying DCN interrupt sources under VUPDATE_NO_LOCK, we have two
remaining issues to clean up:
1. On DCN, flip completion is now delivered from VUPDATE_NO_LOCK
(dm_crtc_high_irq_handler) instead of GRPH_PFLIP. But VUPDATE_NO_LOCK
fires every frame, regardless of whether a flip has latched.
2. There is a window during commit where a flip is armed (pflip_status =
SUBMITTED) but not yet programmed into HW. If the VUPDATE_NO_LOCK
fires in that window, its handler would deliver a flip event to
userspace before HW has latched to it. If userspace then renders to
what it believes is now the back buffer (but HW is still latched to
it!), it will cause display corruption. This issue seemed to have
been introduced by:
commit 1159898a88 ("drm/amd/display: Handle commit plane with no FB.")
Enabling replay or psr extended the duration of this window, and
hence made corruption more likely to be observed.
[How]
* Move acrtc->event/pflip_status arming to after
update_planes_and_stream_adapter() has programmed the flip into HW.
This closes the window where pflip_status is SUBMITTED but the flip is
not yet programmed.
* Add dc_get_flip_pending_on_otg(), which reads the HUBP flip-pending
status straight from HW for the pipe(s) bound to an OTG instance. It
is keyed only by otg_inst and does not take or mutate a
dc_plane_state, so it is safe to call from the OTG interrupt handler
without racing a concurrent commit that may be modifying plane state.
* Optimistically query for flip-pending after programming, in the event
that HW latched to the new fb between programming start and arming
event. If it latched, send the vblank event immediately, rather than
wait for the next vblank IRQ.
* In the VUPDATE_NO_LOCK handler, only deliver flip completion once
dc_get_flip_pending_on_otg() reports the flip is no longer pending.
Otherwise leave the flip armed and retry on the next vupdate.
* For DCE, maintain the existing behavior of arming flips before
programming, and relying on GRPH_FLIP to fire at HW latch.
v2:
* Drop flip_programmed completion object, instead move
event/pflip_status arming after programming.
* For DCN, optimistically query for flip pending immediately after
programming, and if it latched, send event right away.
v3:
* Fix event timestamps on optimistic flip latch detection, where it's
possible for it to run *before* the vupdate IRQ updates the timestamp.
* Add more docstrings for DCN vblank handling.
* Clean up if conditions in dm_arm_vblank_event().
* Code style cleanup on braces surrounding multi-line statements.
Fixes: 9b47278cec ("drm/amd/display: temp w/a for dGPU to enter idle optimizations")
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/3787
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/4141
Assisted-by: Copilot:claude-opus-4.8
Tested-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f64a9be5653689ff43e148cd8a6483077488c8e5)
Cc: stable@vger.kernel.org # 8382cd2349: drm/amd/display: consolidate DCN vblank/flip handling onto vupdate_no_lock
Cc: stable@vger.kernel.org
[Why]
On DCN, vblank events were delivered from VSTARTUP/VUPDATE
(dm_crtc_high_irq/dm_vupdate_high_irq) and pageflip completion from
GRPH_PFLIP (dm_pflip_high_irq). These signals can be masked by hardware
by a few things:
* DPG - DCN can Dynamically Power Gate parts of the display pipe when a
self-refresh capable eDP is connected. DPG is engaged when there's
enough static frames (detected through drm_vblank_off). Once gated,
even though the OTG (output timing generator) is still enabled,
VSTARTUP and GRPH_FLIP are masked.
* GSL - Driver can use the Global Sync Lock to block HW from latching
onto double-buffered registers during programming, to prevent HW from
latching onto a partially programmed state. This will mask VSTARTUP,
GRPH_FLIP, and VUPDATE. See dcn20_pipe_control_lock().
* MALL - A DCN accessible cache introduced in DCN32+ DGPUs that can
store fb data to allow for longer DRAM sleep. When scanning out from
MALL, VSTARTUP is masked.
When masked, events are never delivered, which can show up as flip_done
timeouts in the wild.
However, there is an interrupt source on DCN that is never masked:
VUPDATE_NO_LOCK. It's simply an unmasked variant of VUPDATE, which fires
while the OTG is active, at the exact point hardware latches
double-buffered registers. It is therefore the natural single signal for
delivering both vblank and flip-completion events on DCN, and the
correct point to timestamp both VRR and non-VRR vblanks.
DCE's interrupt sources are different, it does not have an unmaskable
VUPDATE_NO_LOCK. The only unmaskable DCE interrupt is VLINE0, but it can
only be programmed as a vline offset from vsync_start, making it
unsuitable for VRR. Thus, we keep DCE untouched and use the existing mix
of interrupt sources.
[How]
For DCN1 and newer only:
* Factor the body of dm_crtc_high_irq() into dm_crtc_high_irq_handler()
and drive it from dm_vupdate_high_irq() (VUPDATE_NO_LOCK). DCE keeps
using dm_crtc_high_irq() (VSTARTUP) and dm_pflip_high_irq()
(GRPH_PFLIP) unchanged.
* Stop registering VSTARTUP (crtc_irq) and GRPH_PFLIP (pageflip_irq) on
DCN, and stop enabling them in amdgpu_dm_crtc_set_vblank() /
manage_dm_interrupts(). Enable VUPDATE whenever vblank is enabled on
DCN (previously only in VRR mode). The secure-display vline0 interrupt
is left untouched.
* VUPDATE_NO_LOCK does not early-fire on an immediate (tearing / async)
flip, since HW latches the new address right away. Deliver the flip
completion event immediately after programming such flips in
amdgpu_dm_commit_planes(), and clear pflip_status so the next vupdate
handler does not double-send.
v2: Do not gate VUPDATE_NO_LOCK on DCN in dm_handle_vrr_transition()
Also toggle VUPDATE_NO_LOCK on DCN in dm_gpureset_toggle_interrupts()
Re-cook vblank event count and timestamp for immediate flips
Fixes: 9b47278cec ("drm/amd/display: temp w/a for dGPU to enter idle optimizations")
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/3787
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/4141
Assisted-by: Copilot:claude-opus-4.8
Co-developed-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Tested-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c87e6635d2db02c88ae8d09529362da672d34770)
Cc: stable@vger.kernel.org
Some AMD APU multi-function devices expose an integrated USB xHCI
controller. In some circumstances (such as larger VRAM), the PM core
can resume can fail when the xHCI controller is resuming in parallel
with the GPU/display function.
On affected systems, the xHCI controller can complete pci_pm_resume
and start resuming USB devices while the GPU is still in its much
longer resume path. This race condition leads to USB device resume
failures followed by:
xhci_hcd ...: xHCI host not responding to stop endpoint command
xhci_hcd ...: HC died; cleaning up
Create a device link from any xHCI controller sharing the same PCIe
root port as the APU display function. The link uses DL_FLAG_STATELESS
and DL_FLAG_PM_RUNTIME to ensure the GPU completes its resume before
the xHCI controller begins resuming USB devices.
This device link is done specifically in amdgpu so that if the
platform firmware has been modified such that this issue doesn't happen
the version can be detected and the workaround skipped.
Suggested-by: Aaron Ma <aaron.ma@canonical.com>
Reported-by: mrh@frame.work
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221073
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Alexander F <superveridical@gmail.com>
Tested-by: Francis DB <francisdb@gmail.com>
Link: https://patch.msgid.link/20260713195313.1739762-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 07c93d7eeb0d990bc1b8e3b1eafa464bc9feee97)
Cc: stable@vger.kernel.org
DCN42B enables DML2 and DML21 by default and defines
dcn42b_prepare_mcache_programming(), but the resource function table only
wires the callback when CONFIG_DRM_AMD_DC_DML21 is defined.
There is no in-tree Kconfig symbol named DRM_AMD_DC_DML21, so the
preprocessor always removes the callback entry. Sibling DCN42 and DCN401
resource tables wire their prepare_mcache_programming callbacks
unconditionally, and the core DC code already checks whether the callback
pointer is present before calling it.
Remove the stale guard so DCN42B exposes the callback relation that its
source and DML21 build world already provide.
This is an RFC patch draft from static conditional callback legality
auditing. It needs AMD display maintainer review before submission as a
final fix.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 85453fb4ff726e1ddb9984ee83dca260903c5353)
In dm_update_crtc_state(), the skip_modeset path releases new_stream
via dc_stream_release() but does not set the pointer to NULL.
If a later error (e.g., color management failure) triggers the fail
label, the error path calls dc_stream_release() again on the same
dangling pointer, causing a double release and potential use-after-free.
Fix this by setting new_stream to NULL after the initial release.
Fixes: 9b690ef3c7 ("drm/amd/display: Avoid full modeset when not required")
Signed-off-by: WenTao Liang <vulab@iscas.ac.cn>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 99f3af19073b3ddbfd96e789124cce12c4277b28)
Cc: stable@vger.kernel.org
The Lenovo Legion 5 15ARH05 (Renoir) ships a BOE 0x08DF eDP panel that
advertises AUX/DPCD backlight control, so amdgpu's automatic detection
(amdgpu_backlight == -1) selects AUX. On this panel the AUX backlight
path has no effect: brightness writes are accepted but the panel level
never changes, the display is stuck at a fixed brightness and
max_brightness is reported as a bogus 511000. As a result neither the
desktop brightness slider nor the brightness hotkeys do anything.
Forcing PWM backlight (amdgpu.backlight=0) restores working control:
max_brightness becomes 65535 and the level tracks writes. This has long
been applied by users as a manual kernel-parameter workaround.
Extend the generic panel backlight quirk with a force_pwm flag, add an
entry for the Legion 5 15ARH05 / BOE 0x08DF panel, and have amdgpu
disable AUX backlight (use PWM) when the quirk matches and the user
lets the driver auto-select the backlight type.
Signed-off-by: Alessandro Rinaldi <ale@alerinaldi.it>
Tested-by: Alessandro Rinaldi <ale@alerinaldi.it>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 81b39f43e7e53589491e2eef6bad5389626b4b9c)
Cc: stable@vger.kernel.org
The change referenced by the Fixes tag releases the HIQ SDMA MQD trunk
buffer when device_queue_manager_init() fails after it has been
allocated.
However, the same failure path can also be reached after
init_mqd_managers() has succeeded. At that point dqm->mqd_mgrs[] contains
per-type MQD manager objects owned by the device queue manager. The
normal teardown path frees those objects from uninitialize(), but the
initialization error path only frees dqm itself.
Free the MQD managers from the initialization error path as well. This is
safe for earlier failures because dqm is zeroed when allocated and
init_mqd_managers() clears the entries it rolls back internally.
Fixes: b7cccc8286 ("drm/amdkfd: fix a memory leak in device_queue_manager_init()")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1fff2e07b6670bc5b8f7344a8708c136259cb176)
Cc: stable@vger.kernel.org
Allow using multiple SDMA schedulers only on GPUs where
we are allowed to do concurrent VM flushes.
This consideration is necessary because all GART windows
are mapped in VMID 0 (the kernel VMID) so each buffer
entity would flush VMID 0 concurrently.
Practically this means that we can't use multiple SDMA
engines for TTM on GFX6-8 and Navi 1x.
Fixes: 01c836788b ("drm/amdgpu: pass all the sdma scheds to amdgpu_mman")
Fixes: e4029f7a94 ("drm/amdgpu: only use working sdma schedulers for ttm")
Cc: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a8171229bc836607fbc225d323ebc4d14489cfbb)
There were two mistakes in the previous implementation:
The check for AutomaticDCTransition should be inverted.
We recently learned that the kernel should send
PPSMC_MSG_RunningOnAC when the flag is set, and not the
other way around.
The clocks also need to be recomputed, because the code in
the smu7_apply_state_adjust_rules() function selects
different limits on AC and DC.
Fixes: 96da0d8661 ("drm/amd/pm/smu7: Notify SMU7 of DC->AC switch")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 516f8fc30a1b56af03f39e93c18707d13419fb1f)
Cc: stable@vger.kernel.org
There were two mistakes in the previous implementation:
The check for ATOM_PP_PLATFORM_CAP_HARDWAREDC should be
inverted. We recently learned that the kernel should send
PPSMC_MSG_RunningOnAC when the flag is set, and not the
other way around.
The clocks also need to be recomputed, because the code in
the si_apply_state_adjust_rules() function selects different
limits on AC and DC.
Fixes: 2d071f6457 ("drm/amd/pm/si: Notify the SMC when switching to AC")
Tested-by: Jeremy Klarenbeek <jeremy.klarenbeek99@gmail.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 358dd0a9ce66d898fa934887385327547d599d88)
Cc: stable@vger.kernel.org
When DPM is turned off with the amdgpu.dpm=0 module parameter,
the thermal work queue isn't initialized so we shouldn't
schedule any work on it.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bd018d36171a695952c6d391471c279c9e05c8b2)
On DCE8-class ASICs (e.g. Bonaire), the resource pool contains digital
DIG stream encoders plus one analog DAC encoder. When assigning a stream
encoder for a second DisplayPort MST stream, if the preferred digital
encoder is already acquired, dce100_find_first_free_match_stream_enc_for_link()
falls back to the first free pool entry. That entry may be the analog
encoder, whose funcs table lacks DP hooks such as dp_set_stream_attribute.
The subsequent atomic commit then dereferences NULL function pointers in
link_set_dpms_on() and crashes.
Skip encoders without dp_set_stream_attribute when the stream uses a DP
signal (including MST). Use dc_is_dp_signal(stream->signal) for the MST
fallback path instead of checking only the link connector signal.
Tested on:
- GPU: AMD Radeon R7 260X (Bonaire / DCE8)
- Board: Supermicro C9X299-PG300
- Setup: DP MST daisy chain, hotplug second monitor or have it connected on boot
- Kernel: 7.1.3 (issue observed since 6.19)
- Result: kernel oops without patch; dual monitors stable with patch
Signed-off-by: Andriy Korud <a.korud@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5162
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 28ec64943e3ee4d9b8d30cea61e380f1429953a8)
Cc: stable@vger.kernel.org
The old radeon driver has a documented workaround in ci_dpm.c
which claims that Bonaire 0x6658 with old memory controller
firmware is unstable with MCLK DPM, so as a precaution I
disabled MCLK DPM on this ASIC in amdgpu.
Note that the old MC firmware is not actually used with
amdgpu, but in theory it's possible that the VBIOS sets
up the ASIC with an old MC firmware that is already running
when amdgpu initializes (in which case amdgpu doesn't
load its own firmware).
What I expected to happen is that the GPU would simply use
its maximum memory clock, and indeed this is what seemed
to happen according to amdgpu_pm_info which reads the
current MCLK value from the SMU.
However, some users reported a huge perf regression
and upon a closer look it seems that the GPU seems to
not actually use the highest MCLK value, despite the SMU
reporting that it does.
Let's not disable MCLK DPM on Bonaire 0x6658 (R7 260X).
Keep MCLK DPM disabled on R9 M380 in the 2015 iMac
because that still hangs if we enable it.
Fixes: 9851f29cb0 ("drm/amd/pm/ci: Disable MCLK DPM on problematic CI ASICs")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d34acad064ee7d82bd18f5d87592c422d4d323ac)
Cc: stable@vger.kernel.org
When compiling the AMDGPU display driver for 32-bit architectures,
the linker reports undefined reference to `__udivdi3` in functions
get_dp_dto_frequency_100hz() and dcn401_get_dp_dto_frequency_100hz().
This is because the code uses 64-bit division (/) on 32-bit systems,
which GCC cannot handle directly and instead tries to call the missing
__udivdi3 helper function.
Replace the raw division with div_u64(), the kernel's standard 64-bit
division helper, to avoid the link error.
Signed-off-by: Linlin Yang <yanglinlin@kylinos.cn>
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0421fc6ab3a8514e99156ff3c2cee13ee9af3fa7)
Cc: stable@vger.kernel.org
Currently the contents of IBs are abruptly cut off and don't
show the full contents. This patch makes sure to reserve
space for those contents too so they may be printed.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4e2c0821509fed754e8c31d5053d152fbb3484a5)
Cc: stable@vger.kernel.org
amdgpu_acpi_vfct_bios() fetches the VFCT table with acpi_get_table()
but never releases it. acpi_get_table() takes a reference on the
table (incrementing its validation_count and mapping it on the 0->1
transition); without a paired acpi_put_table() the mapping is leaked
on every call, whether or not a matching VBIOS image is found.
Route all exit paths after the table is acquired through a common
acpi_put_table(). The VBIOS image is copied out with kmemdup() before
the table is released, so it remains valid for the caller.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260708193518.702584-3-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ca5988682b4cba4cd125a0fa99b2de1239164ae4)
Cc: stable@vger.kernel.org
amdgpu_bo_create_reserved() only allocates a new BO when
*bo_ptr (struct amdgpu_bo **bo_ptr as input parameter) is
NULL, it simply skips creation when *bo_ptr is non-NULL.
But it unconditionally reserves, pins, gart allocates
and maps the BO afterwards.
When the same non-NULL BO pointer is passed in again,
for example firmware buffers that live in adev and are
re-loaded on every resume / cp_resume / start
under AMDGPU_FW_LOAD_DIRECT, amdgpu_bo_pin() just increases
pin_count unconditionally, however the matching teardown only unpins
once, so pin_count never drops to zero, so TTM is not able
to move, swap or evict a BO, causing BO leaks.
This commit fixes this issue by only pinning the bo
once at creation, and repeated calls no longer
take additional pin references.
Signed-off-by: Zhu Lingshan <lingshan.zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3ddc0ae76202c447b6aec61e907b852bc94671cf)
Cc: stable@vger.kernel.org
pre_reset only force-completes fences of MAPPED queues. A queue in any
other state (e.g. mid-eviction) keeps its last_fence pending; after a
GPU reset that fence never signals, so the eviction/suspend worker and
process teardown (amdgpu_evf_mgr_flush_suspend) wait on it forever and
wedge the machine:
INFO: task kworker/6:28 blocked for more than 120 seconds.
Workqueue: events amdgpu_eviction_fence_suspend_worker [amdgpu]
Call Trace:
dma_fence_wait_timeout+0x7e/0x130
amdgpu_userq_evict+0x67/0x140 [amdgpu]
amdgpu_eviction_fence_suspend_worker+0xd8/0x160 [amdgpu]
process_scheduled_works+0xa6/0x420
Force-complete every queue's fence regardless of state. The unmap and
mark-hung step stays gated on MAPPED, since unmapping a queue that is
not mapped is invalid.
Fixes: 290f46cf57 ("drm/amdgpu: Implement user queue reset functionality")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9102b39fa924dcc3dc75a3137bfa9633c40b88c0)
Cc: stable@vger.kernel.org
set_pipe_unlock_order needs to be set to true for the pipes to be unlocked
in correct order to avoid det overallocation
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 183bbded999a70c5996e8f399fa8790568d71112)
set_pipe_unlock_order needs to be set to true for the pipes to be unlocked
in correct order to avoid det overallocation
Reviewed-by: Taimur Hassan <syed.hassan@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 198663d035cc439eb48844a2da66f6ae1b0de303)
[Why]
FWTS autobrightness fails on eDP panels because actual_brightness can
read higher than the advertised max_brightness (e.g. 63576 vs 62451).
The conversion helpers expose the firmware PWM range to userspace as
[0..max]. But max_brightness is advertised as (max - min), which is
smaller. So reading the level can return a value above max_brightness.
This regressed in commit 4b61b8a390 ("drm/amd/display: Add debugging
message for brightness caps"), which changed max_brightness to
(max - min) and undid commit 8dbd72cb79 ("drm/amd/display: Export full
brightness range to userspace").
[How]
Advertise max_brightness as max, and scale the initial AC/DC brightness
against max too. Update the KUnit expectations to match.
Fixes: 4b61b8a390 ("drm/amd/display: Add debugging message for brightness caps")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bd9e2b5b0473c75abc0f4134dfe79ecbfb16610d)
Cc: stable@vger.kernel.org
