A sign change is needed for proper calculation of the pressure.
This is a minor fix since it only affects users that might have custom
silicon from Honeywell that has honeywell,pmin-pascal != 0.
Also due to the fact that raw pressure values can not be lower
than output_min (400k-3.3M) there is no need to calculate a decimal for
the offset.
Fixes: 713337d914 ("iio: pressure: Honeywell mprls0025pa pressure sensor")
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix the scan_type sign and realbits assignment.
The pressure is a 24bit unsigned int between output_min and output_max.
transfer function A: 10% to 90% of 2^24
transfer function B: 2.5% to 22.5% of 2^24
transfer function C: 20% to 80% of 2^24
[MPR_FUNCTION_A] = { .output_min = 1677722, .output_max = 15099494 }
[MPR_FUNCTION_B] = { .output_min = 419430, .output_max = 3774874 }
[MPR_FUNCTION_C] = { .output_min = 3355443, .output_max = 13421773 }
Fixes: 713337d914 ("iio: pressure: Honeywell mprls0025pa pressure sensor")
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
To prepare for the introduction of namespaced exports for the IIO consumer
API, remove this include directive which isn't actually used by the driver.
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
AD4134 is a 24-bit, 4-channel, simultaneous sampling, precision
analog-to-digital converter (ADC). The device can be managed through SPI or
direct control of pin logical levels (pin control mode). The AD4134 design
also features a dedicated bus for ADC sample data output. Though, this
initial driver for AD4134 only supports usual SPI connections.
Add basic support for AD4134 that enables single-shot ADC sample read.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The driver no longer uses iio_device_claim_buffer_mode(). Drop it from
ads1018_spi_read_exclusive() context remark.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Currently BMI260 & BMI270 devices do not automatically load this
driver. To fix this, add missing MODULE_DEVICE_TABLE for the i2c,
acpi, and of device tables so the driver will load when the hardware
is detected.
Tested on my OneXPlayer F1 Pro.
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replaced use of deprecated function SIMPLE_DEV_PM_OPS() with
EXPORT_GPL_SIMPLE_DEV_PM_OPS().
Removed PM preprocessor conditions with usage of pm_sleep_ptr().
Signed-off-by: Michael Harris <michaelharriscode@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add an OF device ID table so the driver can bind automatically when
the RFD77402 sensor is described in Device Tree. This enables proper
enumeration via its compatible string and allows instantiation on
DT-based platforms.
Signed-off-by: Shrikant Raskar <raskar.shree97@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The RF Digital RFD77402 is a Time-of-Flight (ToF) proximity and distance
sensor that provides absolute and highly accurate distance measurements
from 100 mm up to 2000 mm over an I2C interface. It includes an optional
interrupt pin that signals when new measurement data is ready.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Shrikant Raskar <raskar.shree97@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Since commit 1f4ea4838b ("mcb: Add missing modpost build support")
the MODULE_ALIAS() is redundant as the module alias is now
automatically generated from the MODULE_DEVICE_TABLE().
Remove the explicit alias.
No functional change intended.
Reviewed-by: Jorge Sanjuan Garcia <dev-jorge.sanjuangarcia@duagon.com>
Signed-off-by: Jose Javier Rodriguez Barbarin <dev-josejavier.rodriguez@duagon.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
'struct configfs_item_operations' and 'configfs_group_operations' are not
modified in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
5037 1528 64 6629 19e5 drivers/iio/industrialio-sw-device.o
5509 1528 64 7101 1bbd drivers/iio/industrialio-sw-trigger.o
After:
=====
text data bss dec hex filename
5133 1432 64 6629 19e5 drivers/iio/industrialio-sw-device.o
5605 1432 64 7101 1bbd drivers/iio/industrialio-sw-trigger.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Be consistent and use dev_err_probe() as in all other places in the
.probe() path.
While at it, remove the line break in the version condition. Yes, it
goes over the 80 column limit but I do think the line break hurts
readability in this case.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use a local struct device variable to improve readability in some code
paths during probe. While at it, fix some line breaks not properly
aligned to the open parenthesis.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Simplify the probe function by using a local 'dev' variable instead of
full pointer dereference. This makes several lines shorter, which
allows to avoid wrapping making code more readable.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Simplify the probe function by using local 'dev' and 'np' variables
instead of full pointer dereferences. This makes several lines shorter,
which allows to avoid wrapping making code more readable.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Simplify the probe function by using local 'dev' and 'np' variables
instead of full pointer dereferences. This makes several lines shorter,
which allows to avoid wrapping making code more readable. While
touching the return line, simplify by avoiding unnecessary 'ret'
assignment.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When gp0 or gp1 is not taken as an interrupt, expose them as GPO if
gpio-contoller is set in the devicetree. gpio-regmap is not used
because the GPO static low is 'b101 and static high is 0b110; low state
requires setting bit 0, not fitting the abstraction of low=0 and
high=mask.
Signed-off-by: Jorge Marques <jorge.marques@analog.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Adds support for IIO Events. Optionally, gp0 is assigned as Threshold
Either signal, if not present, fallback to an I3C IBI with the same
role.
Signed-off-by: Jorge Marques <jorge.marques@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Adds support for IIO Trigger. Optionally, gp1 is assigned as Data Ready
signal, if not present, fallback to an I3C IBI with the same role.
The software trigger is allocated by the device, but must be attached by
the user before enabling the buffer. The purpose is to not impede
removing the driver due to the increased reference count when
iio_trigger_set_immutable() or iio_trigger_get() is used.
Signed-off-by: Jorge Marques <jorge.marques@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add dt-bindings for AD4062 family, devices AD4060/AD4062, low-power with
monitor capabilities SAR ADCs. Each variant of the family differs in
resolution. The device contains two outputs (gp0, gp1). The outputs can
be configured for range of options, such as threshold and data ready.
The device uses a 2-wire I3C interface.
Signed-off-by: Jorge Marques <jorge.marques@analog.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This is the iio driver for Microchip MCP47F(E/V)B(0/1/2)1,
MCP47F(E/V)B(0/1/2)2, MCP47F(E/V)B(0/1/2)4 and MCP47F(E/V)B(0/1/2)8 series
of buffered voltage output Digital-to-Analog Converters with nonvolatile or
volatile memory and an I2C Interface.
The families support up to 8 output channels.
The devices can be 8-bit, 10-bit and 12-bit.
Signed-off-by: Ariana Lazar <ariana.lazar@microchip.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This is the device tree schema for iio driver for Microchip
MCP47F(E/V)B(0/1/2)1, MCP47F(E/V)B(0/1/2)2, MCP47F(E/V)B(0/1/2)4 and
MCP47F(E/V)B(0/1/2)8 series of buffered voltage output Digital-to-Analog
Converters with nonvolatile or volatile memory and an I2C Interface.
The families support up to 8 output channels.
The devices can be 8-bit, 10-bit and 12-bit.
Signed-off-by: Ariana Lazar <ariana.lazar@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
bitmap_full() is less verbose and more efficient, as it stops traversing
scan_mask as soon as the 1st unset bit found.
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add ti-ads1018 driver for Texas Instruments ADS1018 and ADS1118 SPI
analog-to-digital converters.
This chips' MOSI pin is shared with a data-ready interrupt. Defining
this interrupt in devicetree is optional, therefore we only create an
IIO trigger if one is found.
Handling this interrupt requires some considerations. When enabling the
trigger the CS line is tied low (active), thus we need to hold
spi_bus_lock() too, to avoid state corruption. This is done inside the
set_trigger_state() callback, to let users use other triggers without
wasting a bus lock.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Delete iio_device_claim_direct_mode() when reading temperature.
It enables polling of temperature data while buffer is on and it
doesn't have any impact on the other sensors.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Timestamps were already written to the buffer in
scd4x_trigger_handler(), this patch makes them available as a channel.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Petre Rodan
Romain Gantois
Marcelo Schmitt
Chen Ni
Kurt Borja
Derek J. Clark
Michael Harris
Shrikant Raskar
Jose Javier Rodriguez Barbarin
Christophe JAILLET
Randy Dunlap
Nuno Sá
Krzysztof Kozlowski
Jorge Marques
Ariana Lazar
Yury Norov (NVIDIA)
Tomas Borquez
Frank Li
Jean-Baptiste Maneyrol
Fiona Klute