Pull RTC updates from Alexandre Belloni:
"Most of the work and improvements are for features of the m41t93.
The ds1307 also gets support for OSF (Oscillator Stop Flag) for
new variants.
The pcap driver is being removed as the Motorola EZX support was
removed a while ago.
Subsystem:
- add rtc_read_next_alarm() to read next expiring timer
Drivers:
- ds1307: handle OSF for ds1337/ds1339/ds3231, add clock provider for
ds1307, fix wday for rx8130
- m41t93: DT support, alarm, clock provider, watchdog support
- mv: add suspend/resume support for wakeup
- pcap: remove driver
- renesas-rtca3: many fixes"
* tag 'rtc-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (36 commits)
rtc: ds1307: update reference to removed CONFIG_RTC_DRV_DS1307_HWMON
platform/x86: amd-pmc: Fix S0i3 wakeup with alarmtimer
rtc: s35390a: fix typo in comment
rtc: cmos: unregister HPET IRQ handler on probe failure
rtc: ds1307: Fix off-by-one issue with wday for rx8130
dt-bindings: rtc: ds1307: Add epson,rx8901
rtc: bq32000: add delay between RTC reads
rtc: m41t93: Add watchdog support
rtc: m41t93: Add square wave clock provider support
rtc: m41t93: Add alarm support
rtc: m41t93: migrate to regmap api for register access
rtc: m41t93: add device tree support
dt-bindings: rtc: Add ST m41t93
rtc: ds1307: add support for clock provider in ds1307
rtc: mv: add suspend/resume support for wakeup
rtc: aspeed: add AST2700 compatible
dt-bindings: rtc: add ASPEED AST2700 compatible
rtc: interface: fix typos in rtc_handle_legacy_irq() documentation
rtc: msc313: fix NULL deref in shared IRQ handler at probe
rtc: remove unused pcap driver
...
Pull fscrypt fixes from Eric Biggers:
- Fix a bug where in a specific edge case, file contents en/decryption
could be done with the wrong data unit size
- Fix the data structure used for keeping track of users that have
added an fscrypt key to be a simple list instead of a 'struct key'
keyring
This fixes issues such as a lockdep report found by syzbot and
possible unintended interactions with the keyctl() system calls
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: Replace mk_users keyring with simple list
fscrypt: Fix key setup in edge case with multiple data unit sizes
Pull drm fixes from Dave Airlie:
"These are just the fixes from our fixes branch, all pretty small and
scattered.
sysfb:
- drm/sysfb truncation and alignment fixes
edid:
- fix edid OOB read in tile parsing
- increase displayid topology id to correct size
nouveau:
- fix error handling paths in nouveau
amdxdna:
- get_bo_info fix
ivpu:
- fix leak when error handling in ivpu"
* tag 'drm-fixes-2026-06-27' of https://gitlab.freedesktop.org/drm/kernel:
drm/sysfb: Avoid truncating maximum stride
drm/sysfb: Return errno code from drm_sysfb_get_visible_size()
drm/sysfb: Avoid possible truncation with calculating visible size
drm/sysfb: Do not page-align visible size of the framebuffer
drm/edid: fix OOB read in drm_parse_tiled_block()
drm/nouveau: fix reversed error cleanup order in ucopy functions
drm/nouveau/acr: fix missing nvkm_done() in error path of nvkm_acr_oneinit()
accel/amdxdna: Use caller client for debug BO sync
drm/displayid: fix Tiled Display Topology ID size
accel/ivpu: fix HWS command queue leak on registration failure
Pull drm merge window fixes from Dave Airlie:
"This is the merge window fixes from our next tree, i915/xe and amdgpu
make up all of it.
I've got a separate fixes pull from our fixes branch arriving after
this.
i915:
- Fix corrupted display output on GLK, #16209
- Add missing Spectre mitigation for parallel submit IOCTL
- MTL+ fix for DP resume
- clear CRTC blobs after dropping refs
- fix sharpness filter on DP MST
xe:
- Set TTM beneficial order to 9 in Xe
- Several error path cleanups
- Fix TDR for unstarted jobs on kernel queues
- Several TLB invalidation fixes related to suspending LR queues
- Some small RAS fixes
- Multi-queue suspend fix for LR queues
- Revert inclusion of NVL_S firmware
amdgpu:
- devcoredump fixes
- SMU15 fix
- Various irq put/get imbalance cleanup fixes
- 8K panel fix
- DCN3.5 fix
- lockdep fix
- Cleaner shader sysfs IB overflow fix
- Async flip fixes
- GET_MAPPING_INFO fix
- CP_GFX_SHADOW fix
- Ctx pstate handling fix
- GTT bo move handling fixes
- Old UVD BO placement fixes
- GC9 mode2 reset fix
- IH6.1 version fix
- Soft IH ring fix
amdkfd:
- Fix doorbell/mmio double unpin on free
- CRIU fixes
- SMI event fixes
- Sysfs teardown fix
- Various boundary checking fixes
- Various error checking fixes
- SVM fix"
* tag 'drm-next-2026-06-27' of https://gitlab.freedesktop.org/drm/kernel: (52 commits)
drm/i915/cdclk: Fix up CDCLK_FREQ_DECIMAL without a full PLL re-enable
drm/i915/gem: Add missing nospec on parallel submit slot
drm/amdgpu: Use system unbound workqueue for soft IH ring
amdgpu/ih6.1: Fix minor version
drm/amdkfd: Use exclusive bounds for SVM split alignment checks
drm/amdgpu/gfx9: Fix Ring and IB test fail after mode2
drm/amdgpu/uvd: Fix forcing MSG, FB BOs into VCPU segment when it isn't at 0 (v2)
drm/amdgpu/uvd: Place VCPU BO only in VRAM for UVD 4.x and older
drm/amdgpu: Fix amdgpu_bo_move() when old_mem and new_mem are both GTT
drm/amdgpu: Respect placement requirements in amdgpu_gtt_mgr functions
drm/amdgpu: Fix context pstate override handling
drm/amdkfd: Use memdup_array_user to copy data from/to user space at kfd ioctls
drm/amdkfd: check find_first_zero_bit before __set_bit on kfd->doorbell_bitmap
drm/amdkfd: Let driver decide buffer size at AMDKFD_IOC_GET_DMABUF_INFO ioctl
drm/amdgpu: fix recursive ww_mutex acquire in amdgpu_devcoredump_format
drm/amdgpu: convert amdgpu_vm_lock_by_pasid() to drm_exec
drm/amdgpu: Don't use UTS_RELEASE directly
drm/amdkfd: Fix NULL deref during sysfs teardown
drm/amdgpu: validate CP_GFX_SHADOW chunk size in CS pass1
drm/amdgpu: check amdgpu_vm_bo_find() result in GET_MAPPING_INFO
...
Pull ceph updates from Ilya Dryomov:
"This adds support for manual client session reset in CephFS, allowing
operators to get out of tricky livelock situations involving caps and
file locks without evicting the problematic client instance on the MDS
side or rebooting the client node both of which can be disruptive"
* tag 'ceph-for-7.2-rc1' of https://github.com/ceph/ceph-client:
ceph: add manual reset debugfs control and tracepoints
ceph: add client reset state machine and session teardown
ceph: add diagnostic timeout loop to wait_caps_flush()
ceph: harden send_mds_reconnect and handle active-MDS peer reset
ceph: use proper endian conversion for flock_len in reconnect
ceph: convert inode flags to named bit positions and atomic bitops
rbd: switch to dynamic root device
Pull thermal control fixes from Rafael Wysocki:
"These fix a failure path in an Intel thermal driver and prevent
thermal testing module code from being executed after it has been
freed:
- Fix dangling resources on thermal_throttle_online() failure in the
Intel thermal_throttle driver (Ricardo Neri)
- Eliminate a possibility of running thermal testing module code
after that module has been removed (Rafael Wysocki)"
* tag 'thermal-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: testing: zone: Flush work items during cleanup
thermal: intel: Fix dangling resources on thermal_throttle_online() failure
Pull power management fixes from Rafael Wysocki:
"These fix the schedutil cpufreq governor and drop a bogus warning
from the cpuidle core:
- Remove a misguided warning along with an inaccurate comment
next to it from the cpuidle core (Rafael Wysocki)
- Clear need_freq_update as appropriate in the .adjust_perf()
path of the schedutil cpufreq governor to avoid calling
cpufreq_driver_adjust_perf() unnecessarily on every scheduler
utilization update (Zhongqiu Han)"
* tag 'pm-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: Allow exit latency to exceed target residency
cpufreq: schedutil: Fix uncleared need_freq_update on the .adjust_perf() path
Pull ACPI support fixes and cleanups from Rafael Wysocki:
"These fix assorted issues and do cleanups in the ACPI support code,
which includes a fix for tools build breakage related to strncpy()
removal:
- Unbreak ACPICA tools builds after switching over to using
strscpy_pad() that is kernel-specific (Rafael Wysocki)
- Fix module parameter file paths in comments in the ACPI code
managing the general sysfs attributes (Zenghui Yu)
- Update kerneldoc comments in the ACPI resource management code to
follow the common style (Andy Shevchenko)
- Fix inverted interface check in ipmi_bmc_gone() that may cause ACPI
IPMI interfaces to be mishandled (Xu Rao)
- Add __cpuidle annotation to idle state management functions related
to ACPI _LPI to avoid trace-induced RCU warnings (Li RongQing)"
* tag 'acpi-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor_idle: Mark LPI enter functions as __cpuidle
ACPICA: Unbreak tools build after switching over to strscpy_pad()
ACPI: IPMI: Fix inverted interface check in ipmi_bmc_gone()
ACPI: resource: Amend kernel-doc style
ACPI: sysfs: Fix path of module parameters in comments
Pull spi fixes from Mark Brown:
"A fairly unremarkable collection of fixes that came in over the
merge window, plus a new device ID for the DesignWare controller
in the StarFive JHB100 SoC.
There's a couple of core fixes included, one avoiding freeing an
empty resource in error handling cases and another which fixes a
NULL dereference which could be triggered by using an abnormal
device registration flow like driver_override"
* tag 'spi-fix-v7.2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: imx: reconfigure for PIO when DMA cannot be started
spi: dw: Add support for snps,dwc-ssi-2.00a
spi: dt-bindings: snps,dw-apb-ssi: Add starfive,jhb100-spi
spi: rpc-if: Use correct device for hardware reinitialization on resume
spi: acpi: Free resource list at appropriate time
spi: dw: fix wrong BAUDR setting after resume
spi: uniphier: Fix completion initialization order before devm_request_irq()
spi: Add NULL check for spi_get_device_id() in spi_get_device_match_data()
Pull regulator fixes from Mark Brown:
"A couple of unremarkable driver specific fixes that came in during the
merge window"
* tag 'regulator-fix-v7.2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: da9121: Use subvariant ids in the I2C table
regulator: pca9450: Correct default t_off_deb for PCA9451A/PCA9452
Pull regmap fix from Mark Brown:
"Ensure that we don't overwrite the error code when cleaning up a
failed cache initialisation, helping people debug issues if they
do arise"
* tag 'regmap-fix-v7.2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regcache: Do not overwrite error code when finalizing cache after error
Merge a fix eliminating a possibility of running the thermal testing
module code after that module has been removed.
* thermal-testing:
thermal: testing: zone: Flush work items during cleanup
Merge a cpuidle core fix that removes a misguided warning along with an
inaccurate comment next to it.
* pm-cpuidle:
cpuidle: Allow exit latency to exceed target residency
Merge an update of comments regarding the ACPI sysfs code, a kernel-doc
style fixup update of ACPI resource management, and ACPI IPMI driver
fix, and an ACPI processor driver fix for 7.2-rc1:
- Fix module parameter file paths in comments in the ACPI code managing
the general sysfs attributes (Zenghui Yu)
- Update kerneldoc comments in the ACPI resource management code to
follow the common style (Andy Shevchenko)
- Fix inverted interface check in ipmi_bmc_gone() which may cause ACPI
IPMI interfaces to be mishandled (Xu Rao)
- Add __cpuidle to idle state management functions related to ACPI _LPI
to avoid trace-induced RCU warnings (Li RongQing)
* acpi-sysfs:
ACPI: sysfs: Fix path of module parameters in comments
* acpi-resource:
ACPI: resource: Amend kernel-doc style
* acpi-driver:
ACPI: IPMI: Fix inverted interface check in ipmi_bmc_gone()
* acpi-processor:
ACPI: processor_idle: Mark LPI enter functions as __cpuidle
Pull devicetree fixes from Rob Herring:
- Drop unnecessary type reference from khadas,mcu "fan-supply"
- Fix clocks in Renesas R-Mobile APE6 example
- Add missing Unisoc SC2730 PMIC regulators schema
- Fix Amlogic thermal example
- kernel-doc fix for of_map_id()
- Handle negative index in of_fwnode_get_reference_args()
* tag 'devicetree-fixes-for-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: mfd: khadas,mcu: Drop type reference from "fan-supply"
dt-bindings: clock: renesas: div6: Use ZT/ZTR trace clock in R-Mobile APE6 example
regulator: dt-bindings: Add Unisoc SC2730 PMIC
dt-bindings: thermal: amlogic: Correct 'reg' in the example
dt-bindings: thermal: amlogic: Fix missing header in the example
of: Fix RST inline emphasis warnings in of_map_id() kernel-doc
of: property: Fix of_fwnode_get_reference_args() with negative index
Pull LoongArch updates from Huacai Chen:
- Add THREAD_INFO_IN_TASK implementation
- Add build salt to the vDSO
- Add some BPF JIT inline helpers
- Update DTS for I2C clocks and clock-frequency
- Some bug fixes and other small changes
* tag 'loongarch-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
selftests/bpf: Test jited inline of bpf_get_smp_processor_id() for LoongArch
selftests/bpf: Test jited inline of bpf_get_current_task() for LoongArch
selftests/bpf: Add __arch_loongarch to limit test cases for LoongArch
selftests/bpf: Add get_preempt_count() support for LoongArch
LoongArch: dts: Add i2c clocks and clock-frequency properties to LS2K2000
LoongArch: dts: Add i2c clocks and clock-frequency properties to LS2K1000
LoongArch: dts: Add i2c clocks and clock-frequency properties to LS2K0500
LoongArch: BPF: Inline bpf_get_smp_processor_id() helper
LoongArch: BPF: Inline bpf_get_current_task/_btf() helpers
LoongArch: BPF: Fix off-by-one error in tail call
LoongArch: BPF: Fix outdated tail call comments
LoongArch: Add build salt to the vDSO
LoongArch: Fix nr passing in set_direct_map_valid_noflush()
LoongArch: Fix missing dirty page tracking in {pte,pmd}_wrprotect()
LoongArch: Move struct kimage forward declaration before use
LoongArch: Report dying CPU to RCU in stop_this_cpu()
LoongArch: Add PIO for early access before ACPI PCI root register
LoongArch: Add THREAD_INFO_IN_TASK implementation
Pull arm64 fixes from Will Deacon:
"Small crop of arm64 fixes for -rc1. We've got a build fix for a new
randconfig permutation, a fix for a long-standing truncation issue
with hardware watchpoints and a KVM initialisation fix for the newly
merged remapping of the kernel data and bss sections:
- Fix randconfig build failure due to missing include of asm/insn.h
- Reject unaligned hardware watchpoints which were silently being
truncated
- Fix crash in KVM initialisation by deferring the read-only
remapping of the kernel data and bss sections"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: Defer read-only remap of data/bss linear alias
arm64/hw_breakpoint: reject unaligned watchpoints that would truncate BAS
arm64: static_call: include asm/insns.h
Pull ecryptfs updates from Tyler Hicks:
"No functional changes, just code cleanups:
- replace kmalloc()/snprintf() with kasprintf()
- simplify code flow by removing an unnecessary variable"
* tag 'ecryptfs-7.2-rc1-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
ecryptfs: use kasprintf in ecryptfs_crypto_api_algify_cipher_name
ecryptfs: remove redundant variable found_auth_tok
Pull smb server updates from Steve French:
"This is mostly a correctness and compatibility update for ksmbd's
SMB2/3 lease, oplock, durable handle, compound request, CREATE,
rename, stream and share-mode handling.
A large part of the series fixes cases found by smbtorture where ksmbd
diverged from the SMB2/3 protocol requirements.
The main changes are:
- Rework SMB2 lease state handling so lease state is shared per
ClientGuid/LeaseKey across opens, with better validation of lease
create contexts, ACK handling, epochs, break-in-progress reporting,
v2 lease notification routing, and chained lease breaks
- Fix several oplock break corner cases, including ACK validation,
timeout downgrade behavior, level-II break handling on unlink,
share-conflict lease breaks, and read-control/stat-open behavior
- Fix durable handle behavior around delete-on-close, stale
reconnects, reconnect context parsing, oplock/lease break
invalidation, and durable v2 AppInstanceId replacement
- Fix compound request handling so related commands propagate failed
statuses correctly, preserve response framing across chained
errors, keep compound FIDs across READ/WRITE/FLUSH, and send
interim STATUS_PENDING where clients expect cancellable compound
I/O
- Tighten CREATE and stream semantics, including create attribute
validation, allocation size reporting, explicit create security
descriptors, unnamed DATA stream handling, stream directory
validation, and stream delete sharing against the base file
- Fix rename and metadata behavior, including parent directory
sharing checks, denying directory rename with open children, and
preserving SMB ChangeTime across rename for open handles
- Fix two important safety issues: a multichannel byte-range lock
list owner race that could lead to use-after-free, and an NTLMv2
session key update before authentication proof validation
- Fix a concurrent SMB2 NEGOTIATE preauth use-after-free, a UBSAN
warning in compression capability parsing, a false hung-task
warning in the durable handle scavenger, endian debug logging,
Smatch indentation warnings, and kernel-doc warnings
- Increase the default SMB3 transaction size from 1MB to 4MB to
better match modern read/write negotiation and improve sequential
I/O behavior"
* tag 'v7.2-rc-part2-smb3-server-fixes' of git://git.samba.org/ksmbd: (50 commits)
ksmbd: fix kernel-doc warnings in smb2_lease_break_noti()
ksmbd: fix inconsistent indenting warnings
ksmbd: validate NTLMv2 response before updating session key
ksmbd: increase SMB3_DEFAULT_TRANS_SIZE from 1MB to 4MB
ksmbd: fix UBSAN array-index-out-of-bounds in decode_compress_ctxt()
ksmbd: sleep interruptibly in the durable handle scavenger
ksmbd: start file id allocation at 1
ksmbd: treat read-control opens as stat opens only for leases
ksmbd: validate :: stream type against directory create
ksmbd: break conflicting-open leases only as far as needed
ksmbd: break handle caching for share conflicts
ksmbd: normalize ungrantable lease states
ksmbd: return oplock protocol error for level II ack
ksmbd: avoid level II oplock break notification on unlink
ksmbd: downgrade oplock after break timeout
ksmbd: apply create security descriptor first
ksmbd: return requested create allocation size
ksmbd: tighten create file attribute validation
ksmbd: reject empty-attribute synchronize-only create
ksmbd: honor stream delete sharing for base file
...
Pull clk updates from Stephen Boyd:
"This is all clk driver updates. Mostly new SoC support for various
Qualcomm chips and Canaan K230. Otherwise there's non-critical fixes
and updates to clk data such as adding missing clks to existing
drivers or marking clks critical. Nothing looks especially exciting"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (106 commits)
clk: qcom: regmap-phy-mux: Rework the implementation
clk: qcom: a53: Corrected frequency multiplier for 1152MHz
clk: qcom: camcc-milos: Declare icc path dependency for CAMSS_TOP_GDSC
clk: qcom: gdsc: Support enabling interconnect path for power domain
dt-bindings: clock: qcom,milos-camcc: Document interconnect path
interconnect: Add devm_of_icc_get_by_index() as exported API for users
clk: qcom: camcc-x1p42100: Add support for camera clock controller
clk: qcom: camcc-x1e80100: Add support for camera QDSS debug clocks
clk: qcom: videocc-x1p42100: Add support for video clock controller
dt-bindings: clock: qcom: Add X1P42100 camera clock controller
dt-bindings: clock: qcom: Add X1P42100 video clock controller
clk: keystone: sci-clk: fix application of sizeof to pointer
clk: keystone: don't cache clock rate
clk: spacemit: k3: Add PCIe DBI clock
dt-bindings: soc: spacemit: k3: Add PCIe DBI clock IDs
clk: spacemit: k3: Fix PCIe clock register offset
clk: spacemit: k3: Switch to pll2_d6 as parent for PCIe clock
clk: at91: keep securam node alive while mapping it
clk: samsung: exynos990: Fix PERIC0/1 USI clock types
clk: renesas: r9a08g045: Drop unused pm_domain header file
...
Pull SPMI updates from Stephen Boyd:
"Support for Qualcomm PMIC arbiter v8.5 and Hawi along with a
kernel doc cleanup and a kzalloc flex usage"
* tag 'spmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sboyd/spmi:
spmi: use kzalloc_flex in main allocation
spmi: clean up kernel-doc in spmi.h
spmi: spmi-pmic-arb: add support for PMIC arbiter v8.5
dt-bindings: spmi: glymur-spmi-pmic-arb: Add compatible for Qualcomm Hawi SoC
Pull rtla fixes from Steven Rostedt:
- Fix and cleanup .gitignore
- Fix pgrep filter in get_workload_pids.sh
Fix parsing of kernel thread names in get_workload_pids() helper
function. On some systems pgrep matches kernel thread names including
the brackets (e.g. "[osnoise/0]") and other systems brackets are not
included. Fix the tests to handle both.
* tag 'trace-tools-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla/tests: Fix pgrep filter in get_workload_pids.sh
rtla: Fix and clean up .gitignore
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and IPsec.
Current release - regressions:
- do not acquire dev->tx_global_lock in netdev_watchdog_up()
- ethtool: keep rtnl_lock for ops using ethtool_op_get_link()
- fix deadlock in nested UP notifier events
Current release - new code bugs:
- eth:
- cn20k: fix subbank free list indexing for search order
- airoha: fix BQL underflow in shared QDMA TX ring
Previous releases - regressions:
- netfilter:
- flowtable: fix offloaded ct timeout never being extended
- nf_conncount: prevent connlimit drops for early confirmed ct
Previous releases - always broken:
- require CAP_NET_ADMIN in the originating netns when modifying
cross-netns devices
- report NAPI thread PID in the caller's pid namespace
- mac802154: fix dirty frag in in-place crypto for IOT radios
- sctp: hold socket lock when dumping endpoints in sctp_diag, avoid
an overflow
- eth: gve: fix header buffer corruption with header-split and HW-GRO
- af_key: initialize alg_key_len for IPComp states, prevent OOB read"
* tag 'net-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (213 commits)
selftests: bonding: add a test for VLAN propagation over a bonded real device
vlan: defer real device state propagation to netdev_work
net: add the driver-facing netdev_work scheduling API
net: turn the rx_mode work into a generic netdev_work facility
net: ethtool: keep rtnl_lock for ops using ethtool_op_get_link()
rxrpc: Fix rxrpc_rotate_tx_rotate() to check there's something to rotate
rxrpc: Fix leak of released call in recvmsg(MSG_PEEK)
rxrpc: Fix socket notification race
rxrpc: Fix potential infinite loop in rxrpc_recvmsg()
rxrpc: Fix oob challenge leak in cleanup after notification failure
rxrpc: Fix the reception of a reply packet before data transmission
afs: Fix uncancelled rxrpc OOB message handler
afs: Fix further netns teardown to cancel the preallocation charger
rxrpc: Fix double unlock in rxrpc_recvmsg()
rxrpc: Fix leak of connection from OOB challenge
rxrpc: Fix ACKALL packet handling
net: hns3: differentiate autoneg default values between copper and fiber
net: hns3: fix permanent link down deadlock after reset
net: hns3: refactor MAC autoneg and speed configuration
net: hns3: unify copper port ksettings configuration path
...
Pull kvm fixes from Paolo Bonzini:
"s390:
- Fix S390_USER_OPEREXEC so it can now be enabled regardless of other
unrelated capabilities
- Fix handling of the _PAGE_UNUSED pte bit that could lead to guest
memory corruption in some scenarios
- A bunch of misc gmap fixes (locking, behaviour under memory
pressure)
- Fix CMMA dirty tracking
x86:
- Tidy up some WARN_ON() and BUG_ON(), replacing them with
WARN_ON_ONCE() or KVM_BUG_ON(). All of these have obviously never
triggered, or somebody would have been annoyed earlier, but still...
- Fix missing interrupt due to stale CR8 intercept
- Add a statistic that can come in handy to debug leaks as well as
the vulnerability to a class of recently-discovered issues
- Do not ask arch/x86/kernel to export
default_cpu_present_to_apicid() just for KVM"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
x86/apic: KVM: Use cpu_physical_id() to get APIC ID of running vCPU for AVIC
KVM: x86/mmu: Expose number of shadow MMU shadow pages as a stat
KVM: x86: Unconditionally recompute CR8 intercept on PPR update
KVM: VMX: Grab vmcs12 on CR8 interception update iff vCPU is in guest mode
KVM: x86: WARN (once) if RTC pending EOI tracking goes off the rails
KVM: x86: WARN and fail kvm_set_irq() if a PIC or I/O APIC vector is invalid
KVM: x86: Bug the VM, not the kernel, if the ISR count {under,over}flows
KVM: x86/mmu: Bug the VM, not the host kernel, if KVM write-protects upper SPTEs
KVM: x86: Replace BUG_ON() with WARN_ON_ONCE() on "bad" nested GPA translation
KVM: Replace guest-triggerable BUG_ON() in ioeventfd datamatch with get_unaligned()
KVM: s390: Return failure in case of failure in kvm_s390_set_cmma_bits()
KVM: s390: selftests: Fix cmma selftest
KVM: s390: Fix cmma dirty tracking
KVM: s390: Fix locking in kvm_s390_set_mem_control()
KVM: s390: Fix handle_{sske,pfmf} under memory pressure
KVM: s390: Fix code typo in gmap_protect_asce_top_level()
KVM: s390: Do not set special large pages dirty
KVM: s390: Fix dat_peek_cmma() overflow
s390/mm: Fix handling of _PAGE_UNUSED pte bit
KVM: s390: Fix typo in UCONTROL documentation
...
Jakub Kicinski says:
====================
net: avoid nested UP notifier events
syzbot reported that recent ethtool rework leads to deadlock
on stacked devices. VLANs create nested notifications, confusing
execution context. Bringing up dummy causes vlan to bring itself
up as well. Which in turn causes bond to ask for link state -
a call chain traveling in the opposite direction.
bond (3) bond_update_speed_duplex(vlan)
| ^ v
vlan (2) UP(vlan) (4) vlan_ethtool_get_link_ksettings()
| ^ v
dummy (1) UP(dummy) (5) __ethtool_get_link_ksettings()
We locked the instance lock of dummy at (1) and will will
try to lock it again at (5) - which of course deadlocks.
For non-nested notifications this is avoided because NETDEV_UP
is always run ops-locked (so that bond asks for link using the
netif_ API which assumes instance lock already held). The nesting,
however, makes this problematic, we cannot carry the state of
the whole chain back in the opposite direction.
AFAICT vlan is the only driver which causes such issues.
So let's try a localized fix of deferring vlan auto-open
to a workqueue.
====================
Link: https://patch.msgid.link/20260624182018.2445732-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a regression test for the VLAN notifier handling that the netdev_work
deferral fixed.
A VLAN's real device propagates its UP/DOWN, MTU and feature changes onto
the VLANs stacked on top of it. This used to be done synchronously from the
real device's notifier and deadlocked when the real device was brought up
while enslaved to a bond (instance lock held across NETDEV_UP) and the VLAN
on top was itself a bond member: the synchronous propagation re-entered the
stack and took the same instance lock again.
The test covers both halves:
- that the deferred UP/DOWN, MTU and feature propagation actually lands on
the VLAN (link state and MTU use an ops-locked dummy, i.e. the deferral
path; features use veth, which exports vlan_features to inherit), and
- that the deadlock-prone topology - a VLAN on a dummy, with the VLAN and
the dummy each enslaved to a different bond - can be built without
hanging.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260624182018.2445732-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vlan_device_event() generates nested UP/DOWN, MTU and feature
change events. It executes an event for the VLAN device directly
from the notifier - while the locks of the lower device are held.
This causes deadlocks, for example:
bond (3) bond_update_speed_duplex(vlan)
| ^ v
vlan (2) UP(vlan) (4) vlan_ethtool_get_link_ksettings()
| ^ v
dummy (1) UP(dummy) (5) __ethtool_get_link_ksettings()
The dummy device is ops locked, vlan creates a nested event (2),
then bond wants to ask vlan for link state (3). bond uses the
"I'm already holding the instance lock" flavor of API. But in
this case the lock held refers to vlan itself. We hit vlan's
link settings trampoline (4) and call __ethtool_get_link_ksettings()
which tries to lock dummy. Deadlock. There's no clean way for us
to tell the vlan_ethtool_get_link_ksettings() that the caller
is already in lower device's critical section.
Defer the propagation to the per-netdev work facility instead:
the notifier only schedules netdev_work_sched(vlandev, VLAN_WORK_*),
and ndo_work (vlan_dev_work) applies the change later. Hopefully
nobody expects the VLAN state changes to be instantaneous.
If someone does expect the changes to be instantaneous we will
have to do the same thing Stan did for rx_mode and "strategically"
place sync calls, to make sure such delayed works are executed
after we drop the ops lock but before we drop rtnl_lock.
Stan suggests that if we need that down the line we may
consider reshaping the mechanism into "async notifications".
AFAICT only vlan does this sort of netdev open chaining,
so as a first try I think that sticking the complexity into
the vlan code makes sense.
One corner case is that we need to cancel the event if user
explicitly changes the state before work could run. Consider
the following operations with vlan0 on top of dummy0:
ip link set dev dummy0 up # queues work to up vlan0
ip link set dev vlan0 down # user explicitly downs the vlan
ndo_work # acts on the stale event
Reported-by: syzbot+09da62a8b78959ceb8bb@syzkaller.appspotmail.com
Reported-by: syzbot+cb67c392b0b8f0fd0fc1@syzkaller.appspotmail.com
Reported-by: syzbot+9bb8bd77f3966641f298@syzkaller.appspotmail.com
Fixes: 9f275c2e90 ("net: ethtool: make sure __ethtool_get_link_ksettings() is ops-locked")
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260624182018.2445732-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With an extra event mask we can easily extend the netdev work
to also service driver-defined events. For advanced drivers
this is probably not a perfect match, but it makes running
deferred work easier in simple cases.
Expose the netdev_work facility to drivers. Add helpers
to schedule work and a dedicated ndo to perform the driver-
-scheduled actions.
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260624182018.2445732-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The rx_mode update runs from a workqueue: drivers have their
ndo_set_rx_mode_async() callback executed by a single global
work item under RTNL and ops lock. This is a useful pattern.
Support multiple "events" that need to be serviced and make RX_MODE
sync the first one. Call the events "core" because later on
we will let drivers define and schedule their own.
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260624182018.2445732-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Breno reports following splats on mlx5:
RTNL: assertion failed at net/core/dev.c (2241)
WARNING: net/core/dev.c:2241 at netif_state_change+0xed/0x130, CPU#5: ethtool/1335
RIP: 0010:netif_state_change+0xf9/0x130
Call Trace:
<TASK>
__linkwatch_sync_dev+0xea/0x120
ethtool_op_get_link+0xe/0x20
__ethtool_get_link+0x26/0x40
linkstate_prepare_data+0x51/0x200
ethnl_default_doit+0x213/0x470
genl_family_rcv_msg_doit+0xdd/0x110
Looks like I missed ethtool_op_get_link() trying to sync linkwatch,
which needs rtnl_lock. Not all drivers do this - bnxt doesn't,
it just returns the link state, so add an opt-in bit.
Reported-by: Breno Leitao <leitao@debian.org>
Fixes: 45079e0013 ("net: ethtool: optionally skip rtnl_lock on Netlink path for GET ops")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Breno Leitao <leitao@debian.org>
Acked-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260624190439.2521219-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Howells says:
====================
rxrpc: Miscellaneous fixes
Here are some miscellaneous AF_RXRPC fixes for more stuff found by Sashiko[1][2]:
(1) Fix ACKALL handling by adding two more call states to simplify when
ACKs are valid.
(2) Fix connection leak from AF_RXRPC recvmsg userspace OOB handling.
(3) Fix double unlock in AF_RXRPC recvmsg userspace OOB handling.
(4) Fix AFS preallocate charge to flush the waitqueue after unlistening
the socket so that any charging thread that does manage to get started
will be waited for before socket destruction.
(5) Fix AFS OOB notify handling to cancel in-progress OOB notification
handling and then to flush the workqueue it's on.
(6) Fix handling of apparent reply reception before initial transmission
starts in client call.
(7) Fix OOB challenge leak in cleanup on notification failure.
(8) Fix infinite loop in recvmsg if OOB packet available, but no calls.
(9) Fix notify vs recvmsg race where notify thinks the call is already
queued.
(10) Fix MSG_PEEK call leak for calls with no content.
(11) Fix rxrpc_rotate_tx_window() to check that there's something in the Tx
buffer before attempting to rotate it.
====================
Link: https://patch.msgid.link/20260624163819.3017002-1-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rxrpc_input_ackall() accepts ACKALL packets without checking whether the
call is in a state that can legitimately have outstanding transmit buffers.
A forged ACKALL can therefore reach a new service call in
RXRPC_CALL_SERVER_RECV_REQUEST before any reply packets have been queued.
In that state call->tx_top is zero and call->tx_queue is NULL, so
rxrpc_rotate_tx_window() dereferences a NULL txqueue and triggers a
null-pointer dereference.
Fix the handling of ACKALL packets by the following means:
(1) Add two new call states: RXRPC_CALL_CLIENT_PRE_SEND which indicates
that the client call is connected, but nothing has been transmitted as
yet; and RXRPC_CALL_CLIENT_AWAIT_ACK, which indicates that everything
has been transmitted at least once, but we're now waiting for the
stuff remaining in the Tx buffer to be ACK'd (retransmissions may
still happen).
The RXRPC_CALL_CLIENT_PRE_SEND state is set when the call is assigned
a channel and transitions to RXRPC_CALL_CLIENT_SEND_REQUEST when the
first packet is transmitted.
RXRPC_CALL_CLIENT_AWAIT_REPLY is then narrowed in scope to indicate
that all Tx packets have been ACK'd and we're now waiting for the
reply to be received.
(2) As per Wyatt Feng's original patch[1], the ACKALL handler then checks
that the call state is one in which there might be stuff in the Tx
buffer to ACK, but now this includes AWAIT_ACK rather than
AWAIT_REPLY. ACKALL packets are ignored if received in the wrong
state.
Note that unlike Wyatt Feng's patch, it's no longer necessary to check
to see if the Tx buffer exists as this the state set now covers this.
(3) Make the ACKALL handler use call->tx_transmitted rather than
call->tx_top as the former is explicitly the highest packet seq number
transmitted, whereas the latter has a looser definition.
Thanks to Jeffrey Altman for a description of the history of the ACKALL
packet[1].
Fixes: b341a0263b ("rxrpc: Implement progressive transmission queue struct")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Wyatt Feng <bronzed_45_vested@icloud.com>
Co-developed-by: David Howells <dhowells@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Ren Wei <n05ec@lzu.edu.cn>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20260616155749.2125907-2-dhowells@redhat.com/ [1]
Link: https://lore.kernel.org/r/c0fd4fec-1576-4070-b31e-a37d5506f5ed@auristor.com/ [2]
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Link: https://patch.msgid.link/20260624163819.3017002-2-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull block fixes from Jens Axboe:
- blk-cgroup locking rework and fixes:
- fix a use-after-free in __blkcg_rstat_flush()
- defer freeing policy data until after an RCU grace period
- defer the blkcg css_put until the blkg is unlinked from
the queue
- unwind the queue_lock nesting under RCU / blkcg->lock
across the lookup, create, associate and destroy paths
- NVMe fixes via Keith:
- Fix a crash and memory leak during invalid cdev teardown,
and related cdev cleanups (Maurizio, John)
- nvmet fixes: handle TCP_CLOSING in the tcp state_change
handler, reject short AUTH_RECEIVE buffers, handle inline
data with a nonzero offset in rdma, fix an sq refcount leak,
and allocate ana_state with the port (Maurizio, Michael,
Bryam, Wentao, Rosen)
- nvme-fc fix to not cancel requests on an IO target before it
is initialized (Mohamed)
- nvme-apple fix to prevent shared tags across queues on Apple
A11 (Nick)
- Various smaller fixes and cleanups (John)
- MD fixes via Yu Kuai:
- raid1/raid10 fixes for writes_pending and barrier reference
leaks on write and discard failures, plus REQ_NOWAIT handling
fixes (Abd-Alrhman)
- raid5 discard accounting and validation, and a batch of fixes
for stripe batch races (Yu Kuai, Chen)
- Protect raid1 head_position during read balancing (Chen)
- block bio-integrity fixes: correct an error injection static key
decrement, fix GFP flag confusion in bio_integrity_alloc_buf(), and
handle REQ_OP_ZONE_APPEND in __bio_integrity_action() (Christoph)
- Fixes for bio_iov_iter_bounce_write(): revert the iov_iter after a
short copy, and respect the iov_iter nofault flag (Qu)
- Invalidate the cached plug timestamp after a task switch, and clear
PF_BLOCK_TS in copy_process() (Usama)
- Fix the IORING_URING_CMD_REISSUE flags check in blkdev_uring_cmd()
(Yitang)
- Remove a redundant plug in __submit_bio() (Wen)
- Don't warn when reclassifying a busy socket lock in nbd (Deepanshu)
* tag 'block-7.2-20260625' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (45 commits)
block: handle REQ_OP_ZONE_APPEND in __bio_integrity_action
block: fix GFP_ flags confusion in bio_integrity_alloc_buf
block, bfq: don't grab queue_lock to initialize bfq
mm/page_io: don't nest queue_lock under rcu in bio_associate_blkg_from_page()
blk-cgroup: don't nest queue_lock under blkcg->lock in blkcg_destroy_blkgs()
blk-cgroup: don't nest queue_lock under rcu in bio_associate_blkg()
blk-cgroup: don't nest queue_lock under rcu in blkg_lookup_create()
blk-cgroup: don't nest queue_lock under rcu in blkcg_print_blkgs()
blk-cgroup: delay freeing policy data after rcu grace period
blk-cgroup: protect iterating blkgs with blkcg->lock in blkcg_print_stat()
md/raid5: avoid R5_Overlap races while breaking stripe batches
md/raid5: use stripe state snapshot in break_stripe_batch_list()
blk-cgroup: defer blkcg css_put until blkg is unlinked from queue
blk-cgroup: fix UAF in __blkcg_rstat_flush()
block, bfq: protect async queue reset with blkcg locks
nbd: don't warn when reclassifying a busy socket lock
block: fix incorrect error injection static key decrement
md/raid5: let stripe batch bm_seq comparison wrap-safe
md/raid1: protect head_position for read balance
md/raid1: free r1_bio when REQ_NOWAIT is set and read would block on retry
...
Pull io_uring fixes from Jens Axboe:
- Fix a file reference leak in the nop opcode when used with
IOSQE_FIXED_FILE
- Preserve the SQ array entries when resizing the ring via the register
path
- Preserve the partial result for an iopoll request rather than
overwriting it
- Don't audit log IORING_OP_RECV_ZC
- Bound io_pin_pages() by the page array byte size in the memmap path
- Follow-up cleanup to the task_work mpscq conversion, getting rid of
the now-unnecessary tw_pending tracking for the !DEFER_TASKRUN path
- Switch a system_unbound_wq user over to system_dfl_wq
* tag 'io_uring-7.2-20260625' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/memmap: bound io_pin_pages() by page array byte size
io_uring: Use system_dfl_wq instead of system_unbound_wq
io_uring/register: preserve SQ array entries on resize
io_uring, audit: don't log IORING_OP_RECV_ZC
io_uring: get rid of tw_pending for !DEFER task work
io_uring/rw: preserve partial result for iopoll
io_uring/nop: fix file reference leak with IOSQE_FIXED_FILE
Pull gpio fixes from Bartosz Golaszewski:
- fix locking context with shared GPIOs in gpio-tegra
- fix IRQ domain leak in error path in gpio-davinci
- fix returning a potentially uninitialized integer in
gpiochip_set_multiple()
- use raw spinlock in gpio-eic-sprd and gpio-sch to address locking
context issues
- bail out of probe() if registering the GPIO chip fails in gpio-mlxbf3
- fix varible type for storing the "ngpios" property in gpio-pisosr
- fix out-of-bounds pin access in GPIO ACPI
- make GPIO ACPI core only trigger interrupts on boot that are marked
as ActiveBoth
- fix kerneldoc in gpio-tb10x
- reference the real software node of the cs5535 GPIO controller in
Geode board file
* tag 'gpio-fixes-for-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: davinci: fix IRQ domain leak on devm_kzalloc failure
gpio: tegra: do not call pinctrl for GPIO direction
gpio: tb10x: fix struct tb10x_gpio kernel-doc
gpiolib: initialize return value in gpiochip_set_multiple()
x86/platform/geode: reference the real node of the cs5535 GPIO controller
gpio: eic-sprd: use raw_spinlock_t in the irq startup path
gpio: sch: use raw_spinlock_t in the irq startup path
gpiolib: acpi: Prevent out-of-bounds pin access in OperationRegion handler
gpiolib: acpi: Add robust bounds-checking for GPIO pin resources
gpio: mlxbf3: fail probe if gpiochip registration fails
gpio: pisosr: Read "ngpios" as u32
gpiolib: acpi: Only trigger ActiveBoth interrupts on boot