commit 73a4c02f94 upstream.
Commit df4d29732f ("perf/x86/amd: Change/fix NMI latency mitigation
to use a timestamp") fixed handling of late-arriving NMIs but limited
the mitigation to processors having X86_FEATURE_PERFCTR_CORE. However,
it is unclear if processors without this feature are also affected.
When Mediated vPMU is enabled on affected hardware, it is also possible
to bypass the fix inside KVM guests if X86_FEATURE_PERFCTR_CORE is
removed from the guest CPUID (e.g. using "-cpu host,-perfctr-core" with
QEMU). Hence, use the mitigation at all times.
Fixes: df4d29732f ("perf/x86/amd: Change/fix NMI latency mitigation to use a timestamp")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/29a3c970da289ab8f24282933bdb36545c0403e8.1780325517.git.sandipan.das@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 435990e25b upstream.
snd_seq_event_dup() copies an incoming event into a pool cell and, in
the UMP-enabled build, clears the trailing cell->ump.raw.extra word that
the memcpy() did not cover. The guard deciding whether to clear it
compares the copied size against sizeof(cell->event):
memcpy(&cell->ump, event, size);
if (size < sizeof(cell->event))
cell->ump.raw.extra = 0;
For a legacy (non-UMP) event, size == sizeof(struct snd_seq_event) ==
sizeof(cell->event), so the condition is false and the extra word keeps
stale data. The cell pool is allocated with kvmalloc() (not zeroed) and
cells are reused via a free list, so that word holds uninitialised heap
or leftover event data.
When such a cell is delivered to a UMP client (client->midi_version > 0)
that set SNDRV_SEQ_FILTER_NO_CONVERT -- so the legacy event reaches it
unconverted -- snd_seq_read() reads it out as the larger struct
snd_seq_ump_event and copies the stale word to user space, a 4-byte
kernel heap infoleak to an unprivileged /dev/snd/seq client.
Compare against sizeof(cell->ump) instead, so the trailing word is zeroed
for every event shorter than the UMP cell.
Fixes: 46397622a3 ("ALSA: seq: Add UMP support")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Link: https://patch.msgid.link/20260623233841.853326-1-sammiee5311@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b0b864c11 upstream.
Clock period value is used for computing periods of sampling. There is
no need for it to be higher than the maximum odr, otherwise we are
losing precision in the computation for nothing.
Switch clock period value to maximum odr period (8kHz).
Fixes: 0ecc363cce ("iio: make invensense timestamp module generic")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5eef12c4e3 upstream.
The code to handle the case of server disabling multichannel
was picking iface_lock with chan_lock held. This goes against
the lock ordering rules, as iface_lock is a higher order lock
(even if it isn't so obvious).
This change fixes the lock ordering by doing the following in
that order for each secondary channel:
1. store iface and server pointers in local variable
2. remove references to iface and server in channels
3. unlock chan_lock
4. lock iface_lock
5. dec ref count for iface
6. unlock iface_lock
7. dec ref count for server
8. lock chan_lock again
Since this function can only be called in smb2_reconnect, and
that cannot be called by two parallel processes, we should not
have races due to dropping chan_lock between steps 3 and 8.
Fixes: ee1d21794e ("cifs: handle when server stops supporting multichannel")
Reported-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 557495bc87 upstream.
mod_delayed_work() unconditionally queues the work even when it wasn't
previously pending, which can fire the timeout prematurely or restart it
after it already fired. Add a delayed_work_pending() guard to restore
the originally intended semantics.
Premature firing calls fw_devlink_drivers_done() before all built-in
drivers have registered, causing fw_devlink to prematurely relax device
links for suppliers whose drivers haven't loaded yet.
Fixes: 1137838865 ("driver core: Use mod_delayed_work to prevent lost deferred probe work")
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260525012340.3860581-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b35108a51c upstream.
secs_to_jiffies() is defined in hci_event.c and cannot be reused by
other call sites. Hoist it into the core code to allow conversion of the
~1150 usages of msecs_to_jiffies() that either:
- use a multiplier value of 1000 or equivalently MSEC_PER_SEC, or
- have timeouts that are denominated in seconds (i.e. end in 000)
It's implemented as a macro to allow usage in static initializers.
This will also allow conversion of yet more sites that use (sec * HZ)
directly, and improve their readability.
Suggested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Link: https://lore.kernel.org/all/20241030-open-coded-timeouts-v3-1-9ba123facf88@linux.microsoft.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e90a6d668e upstream.
Commit e1b849cfa6 ("writeback: Avoid contention on wb->list_lock when
switching inodes") replaced the queue_rcu_work() based scheduling of
inode wb switches with a plain queue_work(). Since then no switcher
goes through call_rcu(), so rcu_barrier() in cgroup_writeback_umount()
has no callbacks of its own to wait for. It still drains unrelated
call_rcu() callbacks from other subsystems on busy systems, which
incidentally slows umount down; drop it.
Fixes: e1b849cfa6 ("writeback: Avoid contention on wb->list_lock when switching inodes")
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun@linux.alibaba.com>
Link: https://patch.msgid.link/20260521095016.2791354-3-libaokun@linux.alibaba.com
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6689f01d67 upstream.
inode_switch_wbs_work_fn() has a loop like:
wb_get(new_wb);
while (1) {
list = llist_del_all(&new_wb->switch_wbs_ctxs);
/* Nothing to do? */
if (!list)
break;
... process the items ...
}
Now adding of items to the list looks like:
wb_queue_isw()
if (llist_add(&isw->list, &wb->switch_wbs_ctxs))
queue_work(isw_wq, &wb->switch_work);
Because inode_switch_wbs_work_fn() loops when processing isw items, it
can happen that wb->switch_work is pending while wb->switch_wbs_ctxs is
empty. This is a problem because in that case wb can get freed (no isw
items -> no wb reference) while the work is still pending causing
use-after-free issues.
We cannot just fix this by cancelling work when freeing wb because that
could still trigger problematic 0 -> 1 transitions on wb refcount due to
wb_get() in inode_switch_wbs_work_fn(). It could be all handled with
more careful code but that seems unnecessarily complex so let's avoid
that until it is proven that the looping actually brings practical
benefit. Just remove the loop from inode_switch_wbs_work_fn() instead.
That way when wb_queue_isw() queues work, we are guaranteed we have
added the first item to wb->switch_wbs_ctxs and nobody is going to
remove it (and drop the wb reference it holds) until the queued work
runs.
Fixes: e1b849cfa6 ("writeback: Avoid contention on wb->list_lock when switching inodes")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260413093618.17244-2-jack@suse.cz
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6e1930ece8 upstream.
Commit 6c3ea155e5 ("Bluetooth: L2CAP: Fix not tracking outstanding
TX ident") changed ident allocation to use an IDA, releasing idents in
l2cap_put_ident() when the matching response command is received.
But identifiers allocated for commands that have no response defined
are never released. In particular L2CAP_LE_CREDITS is sent repeatedly for
the lifetime of an LE CoC channel, so a peer streaming data to the
host exhausts the 1-255 ident range after 254 credit packets. From
then on l2cap_get_ident() fails:
kernel: Bluetooth: Unable to allocate ident: -28
and every subsequent L2CAP_LE_CREDITS packet is sent with ident 0,
which is invalid (Core Spec, Vol 3, Part A, Section 4: "Signaling
identifier 0x00 is an invalid identifier and shall never be used in
any command"). Remote stacks that validate the ident drop these
commands, never receive new credits, and the channel stalls
permanently. With default socket buffers this happens after roughly 0.5 MB
of received data (the exact amount depends on the socket receive buffer):
< ACL Data TX: Handle 2048 flags 0x00 dlen 12
LE L2CAP: LE Flow Control Credit (0x16) ident 0 len 4
Source CID: 64
Credits: 1
Release the ident immediately after sending L2CAP_LE_CREDITS since no
response will ever release it. Use a local variable instead of
chan->ident so that an ident that an EXT_FLOWCTL channel may be waiting on
(e.g. a pending reconfigure) is not overwritten by a credit packet.
Also add the missing L2CAP_LE_CONN_RSP case to l2cap_put_ident() so
idents allocated for outgoing L2CAP_LE_CONN_REQ commands are released
when the response arrives.
Fixes: 6c3ea155e5 ("Bluetooth: L2CAP: Fix not tracking outstanding TX ident")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221629
Assisted-by: Claude:claude-opus-4.8
Assisted-by: Fable:5
Signed-off-by: Stig Hornang <stig@hornang.me>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 761fb8ec87 upstream.
This attempt to fix regressions caused by reusing ident which apparently
is not handled well on certain stacks causing the stack to not respond to
requests, so instead of simple returning the first unallocated id this
stores the last used tx_ident and then attempt to use the next until all
available ids are exausted and then cycle starting over to 1.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221120
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221177
Fixes: 6c3ea155e5 ("Bluetooth: L2CAP: Fix not tracking outstanding TX ident")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f88a31308d upstream.
Eliminate all kernel-doc warnings in seqlock.h:
- correct the macro to have "()" immediately following the macro name
- don't include the macro parameters in the short description (first line)
- make the parameter names in the comments match the actual macro
parameter names.
- use "::" for the Example
WARNING: include/linux/seqlock.h:1341 This comment starts with '/**', but isn't a kernel-doc comment.
* scoped_seqlock_read (lock, ss_state) - execute the read side critical
Documentation/locking/seqlock:242: include/linux/seqlock.h:1351: WARNING:
Definition list ends without a blank line; unexpected unindent. [docutils]
Warning: include/linux/seqlock.h:1357 function parameter '_seqlock' not described in 'scoped_seqlock_read'
Warning: include/linux/seqlock.h:1357 function parameter '_target' not described in 'scoped_seqlock_read'
Fixes: cc39f3872c ("seqlock: Introduce scoped_seqlock_read()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260123183749.3997533-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a07249981 upstream.
kvm_io_bus_get_dev() returns a device that is only matched by the
address, and nothing else. This can cause a lifetime issue if
the matched device is not the expected type, as by the time
the caller can introspect the object, it might be gone (the srcu
lock having been dropped).
Given that there is only a single user of this helper, the simplest
option is to move the locking responsibility to the caller, which
can keep the srcu lock held for as long as it wants.
Note that this aligns with other kvm_io_bus*() helpers, which
already require the srcu lock to be held by the callers.
Reported-by: Will Deacon <will@kernel.org>
Fixes: 8a39d00670 ("KVM: kvm_io_bus: Add kvm_io_bus_get_dev() call")
Link: https://lore.kernel.org/all/20260626111344.802555-1-maz@kernel.org
Cc: stable@vger.kernel.org
Reviewed-by: Oliver Upton <oupton@kernel.org>
Link: https://patch.msgid.link/20260627105105.1005990-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d58fdbe37a upstream.
Patch series "mm/damon/sysfs-schemes: fix wrong directories put orders in
error paths".
Error paths of damon_sysfs_access_pattern_add_dirs() and
damon_sysfs_scheme_add_dirs() functions put references to directories in
wrong orders. As a result, uninitialized memory dereference and/or
memory leak can happen. Fix those.
This patch (of 2):
In access_pattern_add_dirs(), error handling path puts references starting
from setup failed directories. If the failure happpened from the initial
allication in the setup functions, uninitialized memory dereference
happen. The allocation failures will not commonly happen, but the
consequence is quite bad. Fix the wrong reference put orders.
The issue was discovered [1] by Sashiko.
Link: https://lore.kernel.org/20260618005650.83868-2-sj@kernel.org
Link: https://lore.kernel.org/20260617060005.86852-1-sj@kernel.org [1]
Fixes: 7e84b1f821 ("mm/damon/sysfs: support DAMON-based Operation Schemes")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 5.18.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ff66fe6662 ]
[BUG]
With the previous bug of short direct writes fixed, test case
generic/362 (*) still fails with the following error with nodatasum
mount option:
# generic/362 0s ... - output mismatch (see /home/adam/xfstests/results//generic/362.out.bad)
# - output mismatch (see /home/adam/xfstests/results//generic/362.out.bad)
# --- tests/generic/362.out 2024-08-24 15:31:37.200000000 +0930
# +++ /home/adam/xfstests/results//generic/362.out.bad 2026-05-27 10:13:09.072485767 +0930
# @@ -1,2 +1,3 @@
# QA output created by 362
# +Wrong file size after first write, got 8192 expected 4096
# Silence is golden
# ...
*: If the test case has been executed before with default data checksum,
the failure will not reproduce. Need the following fix to make it
reliably reproducible:
https://lore.kernel.org/linux-btrfs/20260528111659.87113-1-wqu@suse.com/
[CAUSE]
Inside btrfs_dio_iomap_begin() for a direct write, we increase the isize
if it's beyond the current isize.
But if the direct io finished short, we do not revert the isize to the
previous value nor to the short write end.
Then if we need to fall back to buffered writes, and the write has
IOCB_APPEND flag, then the buffered write will be positioned at the
incorrect isize.
The call chain looks like this:
btrfs_direct_write(pos=0, length=4K)
|- __iomap_dio_rw()
| |- iomap_iter()
| | |- btrfs_dio_iomap_begin()
| | |- btrfs_get_blocks_direct_write()
| | |- i_size_write()
| | Which updates the isize to the write end (4K).
| |
| |- iomap_dio_iter()
| | Failed with -EFAULT on the first page.
| |
| |- iomap_iter()
| | |- btrfs_dio_iomap_end()
| | Detects a short write, return -ENOTBLK
| |- if (ret == -ENOTBLK) { ret = 0;}
| Which resets the return value.
|
|- ret = iomap_dio_complet()
| Which returns 0.
|
|- btrfs_buffered_write(iocb, from);
|- generic_write_checks()
|- iocb->ki_pos = i_size_read()
Which is still the new size (4K), other than the original
isize 0.
[FIX]
Introduce the following btrfs_dio_data members:
- old_isize
- updated_isize
If the direct write has enlarged the isize.
Then if we got a short write, and btrfs_dio_data::updated_isize is set,
revert to the correct isize based on old_isize and current file
position.
And here we call i_size_write() without holding an extent lock, which is
a very special case that we're safe to do:
- Only a single writer can be enlarging isize
Enlarging isize will take the exclusive inode lock.
- Buffered readers need to wait for the OE we're holding
Buffered readers will lock extent and wait for OE of the folio range.
Sometimes we can skip the OE wait, but since all page cache is
invalidated, the OE wait can not be skipped.
But I do not think this is the most elegant solution, nor covers all
cases. E.g. if the bio is submitted but IO failed, we are unable to do
the revert.
I believe the more elegant one would be extend the EXTENT_DIO_LOCKED
lifespan for direct writes, so that we can update the isize when a
write beyond EOF finished successfully.
However that change is too huge for a small bug fix.
So only implement the minimal partial fix for now.
[REASON FOR NO FIXES TAG]
The bug is again very old, before commit f85781fb50 ("btrfs: switch to
iomap for direct IO") we are already increasing isize without a
proper rollback for short writes.
Thus only a CC to stable.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 66ff4d366e ]
[BUG]
The test case generic/362 will fail with "nodatasum" mount option (*):
MOUNT_OPTIONS -- -o nodatasum /dev/mapper/test-scratch1 /mnt/scratch
# generic/362 0s ... - output mismatch (see /home/adam/xfstests/results//generic/362.out.bad)
# --- tests/generic/362.out 2024-08-24 15:31:37.200000000 +0930
# +++ /home/adam/xfstests/results//generic/362.out.bad 2026-05-27 10:21:17.574771567 +0930
# @@ -1,2 +1,3 @@
# QA output created by 362
# +First write failed: Input/output error
# Silence is golden
# ...
*: If the test case has been executed before with default data checksum,
the failure will not reproduce. Need the following fix to make it
reliably reproducible:
https://lore.kernel.org/linux-btrfs/20260528111659.87113-1-wqu@suse.com/
[CAUSE]
Inside __iomap_dio_rw(), the -EFAULT/-ENOTBLK error is not directly returned.
Thus we never got an error pointer from __iomap_dio_rw().
The call chain looks like this:
btrfs_direct_write()
|- btrfs_dio_write()
|- __iomap_dio_rw()
| |- iomap_iter()
| | |- btrfs_dio_iomap_begin()
| | Now an ordered extent is allocated for the 4K write.
| |
| |- iomi.status = iomap_dio_iter()
| | Where iomap_dio_iter() returned -EFAULT.
| |
| |- ret = iomap_iter()
| | |- btrfs_dio_iomap_end()
| | | |- btrfs_finish_ordered_extent(uptodate = false)
| | | | |- can_finish_ordered_extent()
| | | | |- btrfs_mark_ordered_extent_error()
| | | | |- mapping_set_error()
| | | | Now the address space is marked error.
| | | | return -ENOTBLK
| | |- return -ENOTBLK
| |- if (ret == -ENOTBLK) { ret = 0; }
| Now the return value is reset to 0.
| Thus no error pointer will be returned.
|
|- ret = iomap_dio_complete()
| Since no byte is submitted, @ret is 0.
|
|- Fallback to buffered IO
| And the buffered write finished without error
|
|- filemap_fdatawait_range()
|- filemap_check_errors()
The previous error is recorded, thus an error is returned
However the buffered write is properly submitted and finished, the error
is from the btrfs_finish_ordered_extent() call with @uptodate = false.
[FIX]
When a short dio write happened, any range that is submitted will have
btrfs_extract_ordered_extent() to be called, thus the submitted range
will always have an OE just covering the submitted range.
The remaining OE range is never submitted, thus they should be treated
as truncated, not an error. So that we can properly reclaim and not
insert an unnecessary file extent item, without marking the mapping as
error.
Extract a helper, btrfs_mark_ordered_extent_truncated(), and utilize
that helper to mark the direct IO ordered extent as truncated, so it
won't cause failure for the later buffered fallback.
[REASON FOR NO FIXES TAG]
The bug itself is pretty old, at commit f85781fb50 ("btrfs: switch to
iomap for direct IO") we're already passing @uptodate=false finishing
the OE.
But at that time OE with IOERR won't call mapping_set_error(), so it's
not exposed.
Later commit d61bec08b9 ("btrfs: mark ordered extent and inode with
error if we fail to finish") finally exposed the bug, but that commit
is doing a correct job, not the root cause.
Anyway the bug is very old, dating back to 5.1x days, thus only CC to
stable.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 65dfde57d1 ]
The function calculates new_len as len << 1 for hex encoding. This
has two overflow risks: the shift itself can overflow when len is
large, and the result can be truncated when assigned to new_len
(declared as int) from the size_t calculation.
Fix by using check_shl_overflow() to catch shift overflow and
changing new_len and loop counter i to size_t to prevent truncation.
Cc: stable@vger.kernel.org
Fixes: 168b717395 ("AUDIT: Clean up logging of untrusted strings")
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Ricardo Robaina <rrobaina@redhat.com>
[PM: remove vertical whitspace noise]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f19590b07c ]
Netfilter code (net/netfilter/nft_log.c and net/netfilter/xt_AUDIT.c)
have to be kept in sync. Both source files had duplicated versions of
audit_ip4() and audit_ip6() functions, which can result in lack of
consistency and/or duplicated work.
This patch adds a helper function in audit.c that can be called by
netfilter code commonly, aiming to improve maintainability and
consistency.
Suggested-by: Florian Westphal <fw@strlen.de>
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Ricardo Robaina <rrobaina@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Stable-dep-of: 65dfde57d1 ("audit: fix potential integer overflow in audit_log_n_hex()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b3ac787565 ]
The generic RSA key parser (rsa_helper.c) bounds each CRT component (p,
q, dp, dq, qinv) by the modulus size n_sz, but qat_rsa_setkey_crt()
allocates half-size DMA buffers (key_sz / 2) and right-aligns each
component with:
memcpy(dst + half_key_sz - len, src, len)
When a CRT component is larger than half_key_sz the subtraction
underflows and memcpy writes past the DMA buffer, causing memory
corruption.
Add a len > half_key_sz check next to the existing !len check for each
of the five CRT components so the driver falls back to the non-CRT path
instead of writing out of bounds.
Fixes: 879f77e907 ("crypto: qat - Add RSA CRT mode")
Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Laurent M Coquerel <laurent.m.coquerel@intel.com>
Tested-by: Laurent M Coquerel <laurent.m.coquerel@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 95ee223189 ]
[WARNING]
When running test cases with injected errors or shutdown, e.g.
generic/388 or generic/475, there is a chance that the following kernel
warning is triggered:
BTRFS info (device dm-2): first mount of filesystem d8a19a28-3232-4809-b0df-38df83e71bff
BTRFS info (device dm-2): using crc32c checksum algorithm
BTRFS info (device dm-2): checking UUID tree
BTRFS info (device dm-2): turning on async discard
BTRFS info (device dm-2): enabling free space tree
BTRFS critical (device dm-2 state E): emergency shutdown
------------[ cut here ]------------
WARNING: extent_io.c:1742 at extent_writepage_io+0x437/0x520 [btrfs], CPU#2: kworker/u43:2/651591
CPU: 2 UID: 0 PID: 651591 Comm: kworker/u43:2 Tainted: G W OE 7.0.0-rc6-custom+ #365 PREEMPT(full) 5804053f02137e627472d94b5128cc9fcb110e88
RIP: 0010:extent_writepage_io+0x437/0x520 [btrfs]
Call Trace:
<TASK>
extent_write_cache_pages+0x2a5/0x820 [btrfs 70299925d0856939e93b17d480651713b3cbba58]
btrfs_writepages+0x74/0x130 [btrfs 70299925d0856939e93b17d480651713b3cbba58]
do_writepages+0xd0/0x160
__writeback_single_inode+0x42/0x340
writeback_sb_inodes+0x22d/0x580
wb_writeback+0xc6/0x360
wb_workfn+0xbd/0x470
process_one_work+0x198/0x3b0
worker_thread+0x1c8/0x330
kthread+0xee/0x120
ret_from_fork+0x2a6/0x330
ret_from_fork_asm+0x11/0x20
</TASK>
---[ end trace 0000000000000000 ]---
BTRFS error (device dm-2 state E): root 5 ino 259 folio 1323008 is marked dirty without notifying the fs
BTRFS error (device dm-2 state E): failed to submit blocks, root=5 inode=259 folio=1323008 submit_bitmap=0: -117
BTRFS info (device dm-2 state E): last unmount of filesystem d8a19a28-3232-4809-b0df-38df83e71bff
[CAUSE]
Inside btrfs we have the following pattern in several locations, for
example inside btrfs_dirty_folio():
btrfs_clear_extent_bit(&inode->io_tree, start_pos, end_of_last_block,
EXTENT_DELALLOC | EXTENT_DO_ACCOUNTING | EXTENT_DEFRAG,
cached);
ret = btrfs_set_extent_delalloc(inode, start_pos, end_of_last_block,
extra_bits, cached);
if (ret)
return ret;
However btrfs_set_extent_delalloc() can return IO errors other than -ENOMEM
through the following callchain:
btrfs_set_extent_delalloc()
\- btrfs_find_new_delalloc_bytes()
\- btrfs_get_extent()
\- btrfs_lookup_file_extent()
\- btrfs_search_slot()
When such IO error happened, the previous btrfs_clear_extent_bit() has
cleared the EXTENT_DELALLOC for the range, and we're expecting
btrfs_set_extent_delalloc() to re-set EXTENT_DELALLOC.
But since btrfs_set_extent_delalloc() failed before
btrfs_set_extent_bit(), EXTENT_DELALLOC flag is no longer present.
And if the folio range is dirty before entering
btrfs_set_extent_delalloc(), we got a dirty folio but no EXTENT_DELALLOC
flag now.
Then we hit the folio writeback:
extent_writepage()
|- writepage_delalloc()
| No ordered extent is created, as there is no EXTENT_DELALLOC set
| for the folio range.
| This also means the folio has no ordered flag set.
|
|- extent_writepage_io()
\- if (unlikely(!folio_test_ordered(folio))
Now we hit the warning.
[FIX]
Introduce a new helper, btrfs_reset_extent_delalloc() to replace the
currently open-coded btrfs_clear_extent_bit() +
btrfs_set_extent_delalloc() combination.
Instead of calling btrfs_clear_extent_bit() first, update
EXTENT_DELALLOC_NEW first, as that part can fail due to metadata IO,
meanwhile btrfs_clear_extent_bit() and btrfs_set_extent_bit() won't
return any error but retry memory allocation until succeeded.
This allows us to fail early without clearing EXTENT_DELALLOC bit, so
even if that new btrfs_reset_extent_delalloc() failed before touching
EXTENT_DELALLOC, the existing dirty range will still have their old
EXTENT_DELALLOC flag present, thus avoid the warning.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7d3ed20f7e ]
In adf_dev_aer_schedule_reset(), ADF_STATUS_RESTARTING is set before
allocating reset_data. If the allocation fails, the function returns
-ENOMEM without queuing reset work, so nothing ever clears the bit.
This leaves the device permanently stuck in the restarting state,
causing all subsequent reset attempts to be silently skipped.
Fix this by using test_and_set_bit() to atomically claim the
RESTARTING state, preventing duplicate reset scheduling races under
concurrent fatal error reporting. If the subsequent allocation fails,
clear the bit to restore clean state so future reset attempts can
proceed.
Cc: stable@vger.kernel.org
Fixes: d8cba25d2c ("crypto: qat - Intel(R) QAT driver framework")
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Co-developed-by: Maksim Lukoshkov <maksim.lukoshkov@intel.com>
Signed-off-by: Maksim Lukoshkov <maksim.lukoshkov@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8bdcf96eb1 ]
Currently, ffs_epfile_release unconditionally frees the endpoint's
read_buffer when a file descriptor is closed. If userspace explicitly
opens the endpoint multiple times and closes one, the read_buffer is
destroyed. This can lead to silent data loss if other file descriptors
are still actively reading from the endpoint.
By tying the lifetime of the read_buffer to the ffs_epfile structure itself
(which is destroyed when the functionfs instance is torn down in
ffs_epfiles_destroy), we eliminate the brittle dependency on open/release
calls while correctly matching the conceptual lifetime of unread data on
the hardware endpoint.
Fixes: 9353afbbfa ("usb: gadget: f_fs: buffer data from ‘oversized’ OUT requests")
Cc: stable <stable@kernel.org>
Assisted-by: Antigravity:gemini-3.1-pro
Signed-off-by: Neill Kapron <nkapron@google.com>
Link: https://patch.msgid.link/20260619040609.4010746-3-nkapron@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ adjusted context in ffs_epfiles_destroy() since 6.12 lacks the simple_remove_by_name() rework and still uses dentry-based cleanup ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8d30528a17 ]
Remove superfluous initialization of status variable in
nvmet_execute_admin_connect() and nvmet_execute_io_connect(), since it
will get overwritten by nvmet_copy_from_sgl().
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Stable-dep-of: 3a413ece25 ("nvmet-auth: validate reply message payload bounds against transfer length")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d86ad3911a ]
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: ea5e57cc97 ("crypto: atmel-sha204a - drop hwrng quality reduction for ATSHA204A")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 75f3d95005 ]
The driver can be compile tested with !CONFIG_OF making certain data
unused:
drivers/crypto/atmel-sha204a.c:129:34: error: ‘atmel_sha204a_dt_ids’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: ea5e57cc97 ("crypto: atmel-sha204a - drop hwrng quality reduction for ATSHA204A")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3137b243c9 ]
ffs_fs_kill_sb() unconditionally calls cancel_work_sync() on
ffs->reset_work when a functionfs instance is unmounted:
ffs_data_reset(ffs);
cancel_work_sync(&ffs->reset_work);
However ffs->reset_work is only ever initialized via INIT_WORK() in
ffs_func_set_alt() and ffs_func_disable(), and only on the
FFS_DEACTIVATED path. That state is reached solely by ffs_data_closed()
when the instance is mounted with the "no_disconnect" option, so for the
common case (no "no_disconnect", or mounted and unmounted without ever
being deactivated) reset_work is never initialized.
ffs_data_new() allocates the ffs_data with kzalloc_obj() and does not
initialize reset_work, and ffs_data_reset()/ffs_data_clear() do not touch
it either, so reset_work.func is left NULL. cancel_work_sync() on such a
work then trips the WARN_ON(!work->func) guard in __flush_work():
WARNING: kernel/workqueue.c:4301 at __flush_work+0x330/0x360, CPU#3: umount
Call trace:
__flush_work
cancel_work_sync
ffs_fs_kill_sb [usb_f_fs]
deactivate_locked_super
deactivate_super
cleanup_mnt
__cleanup_mnt
task_work_run
exit_to_user_mode_loop
el0_svc
On older kernels cancel_work_sync() on a zero-initialized work struct was
a silent no-op, which hid the missing initialization.
Initialize reset_work once in ffs_data_new() so it is always valid for
the lifetime of the ffs_data, and drop the now-redundant INIT_WORK()
calls from the two deactivation paths.
Fixes: 18d6b32fca ("usb: gadget: f_fs: add "no_disconnect" mode")
Cc: stable <stable@kernel.org>
Signed-off-by: Tyler Baker <tyler.baker@oss.qualcomm.com>
Cc: Loic Poulain <loic.poulain@oss.qualcomm.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Acked-by: Michał Nazarewicz <mina86@mina86.com>
Link: https://patch.msgid.link/20260609193635.2284430-1-tyler.baker@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ dropped the ffs_func_disable hunk since 6.6 predates the disable-body split and routes disable through ffs_func_set_alt, so removing the single lazy INIT_WORK there covers both paths ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 56dd29088c ]
The driver saves the minor number it gets upon registration
in its descriptor for debugging purposes. However, there is
inevitably a window between registration and saving the correct
minor in a descriptor. During this window the debugging output
will be wrong.
As wrong debug output is worse than no debug output, just
remove it.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260312094619.1590556-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: c602254ba4 ("USB: iowarrior: fix use-after-free on disconnect race")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2f884d371f ]
trie_lookup_elem() annotates its rcu_dereference_check() walks with
only rcu_read_lock_bh_held(). Because rcu_dereference_check(p, c)
resolves to "c || rcu_read_lock_held()", this passes for XDP/NAPI and
classic RCU readers but fails for sleepable BPF programs, which enter
via __bpf_prog_enter_sleepable() and hold only rcu_read_lock_trace().
trie_update_elem() and trie_delete_elem() have the same problem in a
different form: they walk the trie with plain rcu_dereference(), which
asserts rcu_read_lock_held() unconditionally. Both are reachable from
sleepable BPF programs via the bpf_map_update_elem / bpf_map_delete_elem
helpers, and from the syscall path under classic rcu_read_lock(). In
the writer paths the trie is actually protected by trie->lock (an
rqspinlock taken across the walk); we never relied on the RCU read-side
lock to keep nodes alive there.
A sleepable LSM hook that ends up touching an LPM trie therefore
triggers lockdep on debug kernels:
=============================
WARNING: suspicious RCU usage
7.1.0-... Tainted: G E
-----------------------------
kernel/bpf/lpm_trie.c:249 suspicious rcu_dereference_check() usage!
1 lock held by net_tests/540:
#0: (rcu_tasks_trace_srcu_struct){....}-{0:0},
at: __bpf_prog_enter_sleepable+0x26/0x280
Call Trace:
dump_stack_lvl
lockdep_rcu_suspicious
trie_lookup_elem
bpf_prog_..._enforce_security_socket_connect
bpf_trampoline_...
security_socket_connect
__sys_connect
do_syscall_64
This is lockdep-only -- no UAF, since Tasks Trace RCU does serialize
against the trie's reclaim path -- but it spams the console once per
distinct callsite on every debug kernel running a sleepable BPF LSM
that touches an LPM trie, which is increasingly common.
For the lookup path, switch the rcu_dereference_check() annotation
from rcu_read_lock_bh_held() to bpf_rcu_lock_held(), which accepts all
three contexts (classic, BH, Tasks Trace). Other map types already
follow this convention.
For trie_update_elem() and trie_delete_elem(), annotate the walks as
rcu_dereference_protected(*p, 1) -- matching trie_free() in the same
file -- since trie->lock is held across the walk. rqspinlock has no
lockdep_map, so the predicate degenerates to '1' rather than
lockdep_is_held(&trie->lock); the protection is real but not
machine-verifiable. trie_get_next_key() also uses bare
rcu_dereference() but is reachable only from the BPF syscall, which
holds classic rcu_read_lock() before dispatching, so it is left
untouched.
Fixes: 694cea395f ("bpf: Allow RCU-protected lookups to happen from bh context")
Cc: stable@vger.kernel.org
Signed-off-by: Vlad Poenaru <vlad.wing@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260609135558.193287-2-vlad.wing@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
