In current imx-mailbox driver, the MU IRQ is configured with
'IRQF_NO_SUSPEND' flag set. So during linux suspend/resume flow,
the MU IRQ is always enabled. With commit 892cb524ae ("mailbox: imx:
fix wakeup failure from freeze mode"), if the MU IRQ is triggered after
the priv->suspended flag has been set, the system suspend will be
aborted.
On i.MX7ULP platform, certain drivers that depend on rpmsg may need
to send rpmsg request and receive an acknowledgment from the remote
core during the late_suspend stage. Early suspend abort is not
expected, and the i.MX7ULP already has additional hardware and
software to make sure the system can be wakeup from freeze mode
correctly when MU IRQ is trigger.
Skip the 'suspend' flag handling logic on i.MX7ULP to avoid the
early abort when doing suspend.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The PCC code currently specifies IRQF_ONESHOT if the interrupt could
potentially be shared but doesn't actually use request_threaded_irq() and
the interrupt handler does not use IRQ_WAKE_THREAD so IRQF_ONESHOT is
never relevant. Since commit aef30c8d56 ("genirq: Warn about using
IRQF_ONESHOT without a threaded handler") specifying it has resulted in a
WARN_ON(), fix this by removing IRQF_ONESHOT.
Reported-by: Aishwarya TCV <Aishwarya.TCV@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
MT8196 has 2 new hardware configuration compared with the previous SoC,
which correspond to the 2 new driver data:
1. mminfra_offset: For GCE data path control
Since GCE has been moved into mminfra, GCE needs to append the
mminfra offset to the DRAM address when accessing the DRAM.
2. gce_vm: For GCE hardware virtualization control
Currently, the first version of the mt8196 mailbox controller only
requires setting the VM-related registers to enable the permissions
of a host VM.
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The GCE in MT8196 is placed in MMINFRA and requires all addresses
in GCE instructions for DRAM transactions to be IOVA.
Due to MMIO, if the GCE needs to access a hardware register at
0x1000_0000, but the SMMU is also mapping a DRAM block at 0x1000_0000,
the MMINFRA will not know whether to write to the hardware register or
the DRAM.
To solve this, MMINFRA treats addresses greater than 2G as data paths
and those less than 2G as config paths because the DRAM start address
is currently at 2G (0x8000_0000). On the data path, MMINFRA remaps
DRAM addresses by subtracting 2G, allowing SMMU to map DRAM addresses
less than 2G.
For example, if the DRAM start address 0x8000_0000 is mapped to
IOVA=0x0, when GCE accesses IOVA=0x0, it must add a 2G offset to
the address in the GCE instruction. MMINFRA will then see it as a
data path (IOVA >= 2G) and subtract 2G, allowing GCE to access IOVA=0x0.
Since the MMINFRA remap subtracting 2G is done in hardware and cannot
be configured by software, the address of DRAM in GCE instruction must
always add 2G to ensure proper access. After that, the shift functions
do more than just shift addresses, so the APIs were renamed to
cmdq_convert_gce_addr() and cmdq_revert_gce_addr().
This 2G adjustment is referred to as mminfra_offset in the CMDQ driver.
CMDQ helper can get the mminfra_offset from the cmdq_mbox_priv of
cmdq_pkt and add the mminfra_offset to the DRAM address in GCE
instructions.
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The GCE hardware virtualization configuration supports the isolation of
GCE hardware resources across different OS environments. Each OS is
treated as a virtual machine (VM) for GCE purposes.
There are 6 VMs and 1 host VM. The host VM has main control over the
GCE virtualization settings for all VMs.
To properly access the GCE thread registers, it is necessary to
configure access permissions for specific GCE threads assigned to
different VMs.
Currently, since only the host VM is being used, it is required to
enable access permissions for all GCE threads for the host VM.
There are 2 VM configurations:
1. VM_ID_MAP
There are 4 registers to allocate 32 GCE threads across different VMs:
VM_ID_MAP0 for threads 0-9, VM_ID_MAP1 for threads 10-19,
VM_ID_MAP2 for threads 20-29, and VM_ID_MAP3 for threads 30-31.
Each thread has a 3-bit configuration, where setting all bits to 1
configures the thread for the host VM.
2. VM_CPR_GSIZE
It is used to allocate the CPR SRAM size to each VM. Each VM has 4-bit
configuration, where setting bit 0-3 to configures the size of host VM.
This setting must be configured before the VM configuration to prevent
resource leakage.
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Add the cmdq_mbox_priv structure to store the private data of GCE,
such as the shift bits of the physical address. Then, include the
cmdq_mbox_priv structure within the cmdq_pkt structure.
This allows CMDQ users to utilize the private data in cmdq_pkt to
generate GCE instructions when needed. Additionally, having
cmdq_mbox_priv makes it easier to expand and reference other GCE
private data in the future.
Add cmdq_get_mbox_priv() for CMDQ users to get all the private data
into the cmdq_mbox_priv of the cmdq_pkt.
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Some platforms may leave a responder interrupt pending from earlier
transactions. If a PCC responder channel has a pending interrupt when
the controller starts up, enabling the IRQ line without first clearing
the condition can lead to a spurious interrupt which could disrupt other
transmissions if the IRQ is shared.
Explicitly clear any pending responder interrupt before enabling the IRQ
to ensure a clean start. Acknowledge the responder channel via
pcc_chan_acknowledge() in startup before requesting/enablement of the
IRQ. This ensures a clean baseline for the first transfer/receiption
of the notification/response.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The PCC channel's shared memory region must be set up before the
mailbox controller binds the channel with the client, as the binding
process may trigger client operations like startup() that may rely on
SHMEM being initialized.
Reorder the setup sequence to ensure the shared memory is ready before
binding. Initialize and map the PCC shared memory (SHMEM) prior to
calling mbox_bind_client() so that clients never observe an uninitialized
or NULL SHMEM during bind-time callbacks or early use in startup().
This makes the PCC mailbox channel bring-up order consistent and
eliminates a race between SHMEM setup and client binding.
This will be needed in channel startup to clear/acknowledge any pending
interrupts before enabling them.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: lihuisong@huawei.com
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The PCC IRQ handler clears channel-in-use and notifies clients with
mbox_chan_received_data(), but it does not explicitly mark the
transmit as complete. In IRQ completion mode this could leave Tx complete
waiters hanging or lead to generic timeouts in the mailbox core.
Invoke mbox_chan_txdone() in the IRQ path once the platform has
acknowledged the transfer so the core can wake any waiters and update
state accordingly.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The PCC controller currently enables txdone via IRQ if the PCCT exposes
platform capability to generate command completion interrupt, but it
leaves txdone_poll unchanged. Make the behaviour explicit:
- If ACPI_PCCT_DOORBELL is present, use txdone_irq and disable polling.
- Otherwise, disable txdone_irq and fall back to txdone_poll.
Configure the PCC mailbox to use interrupt-based completion for PCC types
that signal completion via IRQ using TXDONE_BY_IRQ, and fall back to
polling for others using TXDONE_BY_POLL.
This ensures the PCC driver uses the appropriate completion mechanism
according to the PCCT table definition and makes the completion mode
unambiguous avoiding mixed signalling when the platform lacks a doorbell
flag set.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Some PCC users poll for completion between transfers and benefit from
the knowledge of previous Tx completion check through the mailbox
framework's ->last_tx_done() op.
Hook up the last_tx_done callback in the PCC mailbox driver so the mailbox
framework can correctly query the completion status of the last transmitted
message. This aligns PCC with other controllers that already implement such
last_tx_done status query.
No functional change unless callers use ->last_tx_done(). Normal Tx and
IRQ paths are unchanged. This change just improves synchronization and
avoids unnecessary timeouts for non-interrupt driven channels by ensuring
correct completion detection for PCC channels that don’t rely on interrupts.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
This reverts commit 5378bdf6a6.
Commit 5378bdf6a6 ("mailbox/pcc: support mailbox management of the shared buffer")
attempted to introduce generic helpers for managing the PCC shared memory,
but it largely duplicates functionality already provided by the mailbox
core and leaves gaps:
1. TX preparation: The mailbox framework already supports this via
->tx_prepare callback for mailbox clients. The patch adds
pcc_write_to_buffer() and expects clients to toggle pchan->chan.manage_writes,
but no drivers set manage_writes, so pcc_write_to_buffer() has no users.
2. RX handling: Data reception is already delivered through
mbox_chan_received_data() and client ->rx_callback. The patch adds an
optional pchan->chan.rx_alloc, which again has no users and duplicates
the existing path.
3. Completion handling: While adding last_tx_done is directionally useful,
the implementation only covers Type 3/4 and fails to handle the absence
of a command_complete register, so it is incomplete for other types.
Given the duplication and incomplete coverage, revert this change. Any new
requirements should be addressed in focused follow-ups rather than bundling
multiple behavioral changes together.
Fixes: 5378bdf6a6 ("mailbox/pcc: support mailbox management of the shared buffer")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The ARCH_MICROCHIP symbol has been defined for some time on RISCV, as a
replacement for ARCH_MICROCHIP_POLARFIRE since there are now other
Microchip RISC-V products. Drop the POLARFIRE from
ARCH_MICROCHIP_POLARFIRE in the POLARFIRE_SOC_MAILBOX Kconfig entry
since the newly added pic64gx also uses the mailbox and it is one of the
few users of ARCH_MICROCHIP_POLARFIRE left in the tree.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The cluster_cfg array is dynamically allocated to hold per-CPU
configuration structures, with its size based on the number of online
CPUs. Previously, this array was indexed using hartid, which may be
non-contiguous or exceed the bounds of the array, leading to
out-of-bounds access.
Switch to using cpuid as the index, as it is guaranteed to be within
the valid range provided by for_each_online_cpu().
Signed-off-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Document CPUSS Control Processor (CPUCP) mailbox controller for Qualcomm
Kaanapali, which is compatible with X1E80100, use fallback to indicate
this.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Although it is guided that `#mbox-cells` must be at least 1, there are
many instances of `#mbox-cells = <0>;` in the device tree. If that is
the case and the corresponding mailbox controller does not provide
`fw_xlate` and of_xlate` function pointers, `fw_mbox_index_xlate()` will
be used by default and out-of-bounds accesses could occur due to lack of
bounds check in that function.
Cc: stable@vger.kernel.org
Signed-off-by: Joonwon Kang <joonwonkang@google.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The MTK VCP mailbox enables the SoC to communicate with the VCP by passing
messages through 64 32-bit wide registers. It has 32 interrupt vectors in
either direction for signalling purposes.
This adds a binding for Mediatek VCP mailbox.
Signed-off-by: Jjian Zhou <jjian.zhou@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Pull btrfs fixes from David Sterba:
- with large folios in use, fix partial incorrect update of a reflinked
range
- fix potential deadlock in iget when lookup fails and eviction is
needed
- in send, validate inline extent type while detecting file holes
- fix memory leak after an error when creating a space info
- remove zone statistics from sysfs again, the output size limitations
make it unusable, we'll do it in another way in another release
- test fixes:
- return proper error codes from block remapping tests
- fix tree root leaks in qgroup tests after errors
* tag 'for-6.19-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: remove zoned statistics from sysfs
btrfs: fix memory leaks in create_space_info() error paths
btrfs: invalidate pages instead of truncate after reflinking
btrfs: update the Kconfig string for CONFIG_BTRFS_EXPERIMENTAL
btrfs: send: check for inline extents in range_is_hole_in_parent()
btrfs: tests: fix return 0 on rmap test failure
btrfs: tests: fix root tree leak in btrfs_test_qgroups()
btrfs: release path before iget_failed() in btrfs_read_locked_inode()
Pull arm64 fixes from Catalin Marinas:
"An arm64/mpam fix to use non-atomic bitops on struct mmap_props member
(atomicity not required).
For kunit testing, the structure is packed to avoid memcmp() errors
but this affects atomic bitops as they have strict alignment
requirements.
Also remove a duplicate include in the mpam driver"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm_mpam: Use non-atomic bitops when modifying feature bitmap
arm_mpam: Remove duplicate linux/srcu.h header
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Device quirk to disable faulty temperature (Ilikara)
- TCP target null pointer fix from bad host protocol usage (Shivam)
- Add apple,t8103-nvme-ans2 as a compatible apple controller
(Janne)
- FC tagset leak fix (Chaitanya)
- TCP socket deadlock fix (Hannes)
- Target name buffer overrun fix (Shin'ichiro)
- Fix for an underflow for rnbd during device unmap
- Zero the non-PI part of the auto integrity buffer
- Fix for a configfs memory leak in the null block driver
* tag 'block-6.19-20260116' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
rnbd-clt: fix refcount underflow in device unmap path
nvme: fix PCIe subsystem reset controller state transition
nvmet: do not copy beyond sybsysnqn string length
nvmet-tcp: fixup hang in nvmet_tcp_listen_data_ready()
null_blk: fix kmemleak by releasing references to fault configfs items
block: zero non-PI portion of auto integrity buffer
nvme-fc: release admin tagset if init fails
nvme-apple: add "apple,t8103-nvme-ans2" as compatible
nvme-tcp: fix NULL pointer dereferences in nvmet_tcp_build_pdu_iovec
nvme-pci: disable secondary temp for Wodposit WPBSNM8
Pull io_uring fix from Jens Axboe:
"Just a single fix moving local task_work inside the cancelation loop,
rather than only before cancelations.
If any cancelations generate task_work, we do need to re-run it"
* tag 'io_uring-6.19-20260116' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: move local task_work in exit cancel loop
In kvm_ioctl_create_device(), kvm_device has allocated memory,
kvm_device->destroy() seems to be supposed to free its kvm_device
struct, but kvm_pch_pic_destroy() is not currently doing this, that
would lead to a memory leak.
So, fix it.
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
In kvm_ioctl_create_device(), kvm_device has allocated memory,
kvm_device->destroy() seems to be supposed to free its kvm_device
struct, but kvm_eiointc_destroy() is not currently doing this, that
would lead to a memory leak.
So, fix it.
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
In kvm_ioctl_create_device(), kvm_device has allocated memory,
kvm_device->destroy() seems to be supposed to free its kvm_device
struct, but kvm_ipi_destroy() is not currently doing this, that
would lead to a memory leak.
So, fix it.
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add missing address-cells 0 to the Local I/O, Extend I/O and PCH-PIC
Interrupt Controller node to silence W=1 warning:
loongson-2k2000.dtsi:364.5-49: Warning (interrupt_map): /bus@10000000/pcie@1a000000/pcie@9,0:interrupt-map:
Missing property '#address-cells' in node /bus@10000000/interrupt-controller@10000000, using 0 as fallback
Value '0' is correct because:
1. The LIO/EIO/PCH interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Cc: stable@vger.kernel.org
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add missing address-cells 0 to the Local I/O interrupt controller node
to silence W=1 warning:
loongson-2k1000.dtsi:498.5-55: Warning (interrupt_map): /bus@10000000/pcie@1a000000/pcie@9,0:interrupt-map:
Missing property '#address-cells' in node /bus@10000000/interrupt-controller@1fe01440, using 0 as fallback
Value '0' is correct because:
1. The Local I/O interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Cc: stable@vger.kernel.org
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add missing address-cells 0 to the Local I/O and Extend I/O interrupt
controller node to silence W=1 warning:
loongson-2k0500.dtsi:513.5-51: Warning (interrupt_map): /bus@10000000/pcie@1a000000/pcie@0,0:interrupt-map:
Missing property '#address-cells' in node /bus@10000000/interrupt-controller@1fe11600, using 0 as fallback
Value '0' is correct because:
1. The Local I/O & Extend I/O interrupt controller do not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Cc: stable@vger.kernel.org
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
SoC integrated peripherals on LS2K1000 and LS2K2000 could be discovered
as PCI devices, but require sideband interrupts to function, which are
previously described by interrupts and interrupt-parent properties.
However, pci/pci-device.yaml allows interrupts property to only specify
PCI INTx interrupts, not sideband ones. Convert these devices to use
interrupt-extended property, which describes sideband interrupts used by
PCI devices since dt-schema commit e6ea659d2baa ("schemas: pci-device:
Allow interrupts-extended for sideband interrupts"), eliminating
dtbs_check warnings.
Cc: stable@vger.kernel.org
Fixes: 30a5532a32 ("LoongArch: dts: DeviceTree for Loongson-2K1000")
Signed-off-by: Yao Zi <me@ziyao.cc>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Pull drm fixes from Simona Vetter:
"We've had nothing aside of a compiler noise fix until today, when the
amd and drm-misc fixes showed up after Dave already went into weekend
mode. So it's on me to push these out, since there's a bunch of
important fixes in here I think that shouldn't be delayed for a week.
Core Changes:
- take gem lock when preallocating in gpuvm
- add single byte read fallback to dp for broken usb-c adapters
- remove duplicate drm_sysfb declarations
Driver Changes:
- i915: compiler noise fix
- amdgpu/amdkfd: pile of fixes all over
- vmwgfx:
- v10 cursor regression fix
- other fixes
- rockchip:
- waiting for cfgdone regression fix
- other fixes
- gud: fix oops on disconnect
- simple-panel:
- regression fix when connector is not set
- fix for DataImage SCF0700C48GGU18
- nouveau: cursor handling locking fix"
* tag 'drm-fixes-2026-01-16' of https://gitlab.freedesktop.org/drm/kernel: (33 commits)
drm/amd/display: Add an hdmi_hpd_debounce_delay_ms module
drm/amdgpu/userq: Fix fence reference leak on queue teardown v2
drm/amdkfd: No need to suspend whole MES to evict process
Revert "drm/amdgpu: don't attach the tlb fence for SI"
drm/amdgpu: validate the flush_gpu_tlb_pasid()
drm/amd/pm: fix smu overdrive data type wrong issue on smu 14.0.2
drm/amd/display: Initialise backlight level values from hw
drm/amd/display: Bump the HDMI clock to 340MHz
drm/amd/display: Show link name in PSR status message
drm/amdkfd: fix a memory leak in device_queue_manager_init()
drm/amdgpu: make sure userqs are enabled in userq IOCTLs
drm/amdgpu: Use correct address to setup gart page table for vram access
Revert duplicate "drm/amdgpu: disable peer-to-peer access for DCC-enabled GC12 VRAM surfaces"
drm/amd: Clean up kfd node on surprise disconnect
drm/amdgpu: fix drm panic null pointer when driver not support atomic
drm/amdgpu: Fix gfx9 update PTE mtype flag
drm/sysfb: Remove duplicate declarations
drm/nouveau/kms/nv50-: Assert we hold nv50_disp->lock in nv50_head_flush_*
drm/nouveau/disp/nv50-: Set lock_core in curs507a_prepare
drm/gud: fix NULL fb and crtc dereferences on USB disconnect
...
Pull Compute Express Link (CXL) fixes from Dave Jiang:
- Recognize all ZONE_DEVICE users as physaddr consumers
- Fix format string for extended_linear_cache_size_show()
- Fix target list setup for multiple decoders sharing the same
downstream port
- Restore HBIW check before derefernce platform data
- Fix potential infinite loop in __cxl_dpa_reserve()
- Check for invalid addresses returned from translation functions on
error
* tag 'cxl-fixes-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Check for invalid addresses returned from translation functions on errors
cxl/hdm: Fix potential infinite loop in __cxl_dpa_reserve()
cxl/acpi: Restore HBIW check before dereferencing platform_data
cxl/port: Fix target list setup for multiple decoders sharing the same dport
cxl/region: fix format string for resource_size_t
x86/kaslr: Recognize all ZONE_DEVICE users as physaddr consumers
Pull PCI fix from Bjorn Helgaas:
- Add a pci_free_irq_vectors() stub to fix a build issue when
CONFIG_PCI is not set (Boqun Feng)
* tag 'pci-v6.19-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Provide pci_free_irq_vectors() stub
Pull power management fixes from Rafael Wysocki:
"These fix an error path memory leak in the energy model management
code, fix a kerneldoc comment in it, and fix and revamp the energy
model YNL specification added recently along with the new energy model
management netlink interface (that received feedback after being
added):
- Fix a memory leak in em_create_pd() error path (Malaya Kumar Rout)
- Fix stale description of the cost field in struct em_perf_state to
reflect the current code (Yaxiong Tian)
- Fix and revamp the energy model YNL specification added recently
along with the energy model netlink interface (Changwoo Min)"
* tag 'pm-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: EM: Add dump to get-perf-domains in the EM YNL spec
PM: EM: Change cpus' type from string to u64 array in the EM YNL spec
PM: EM: Rename em.yaml to dev-energymodel.yaml
PM: EM: Fix yamllint warnings in the EM YNL spec
PM: EM: Fix memory leak in em_create_pd() error path
PM: EM: Fix incorrect description of the cost field in struct em_perf_state
drm-misc-fixes for v6.19-rc6:
vmwgfx:
- Fix hw regression from refactoring cursor handling on v10 'hardware'
- Fix warnings in destructor by merging the 2 release functions
- kernel doc fix
- error handling in vmw_compat_shader_add()
rockchip:
- fix vop2 polling
- fix regression waiting for cfgdone without config change
- fix warning when enabling encoder
core:
- take gem lock when preallocating in gpuvm.
- add single byte read fallback to dp for broken usb-c adapters
- remove duplicate drm_sysfb declarations
gud:
- Fix oops on usb disconnect
Simple panel:
- Re-add fallback when connector is not set to fix regressions
- Set correct type in DataImage SCF0700C48GGU18
nouveau:
- locking fixes for cursor handling.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/ce0acfe2-9c1a-42b7-8782-f1e7f34b8544@linux.intel.com
Pull ACPI fixes from Rafael Wysocki:
"Add checks missed by a previous recent update to the ACPI
suspend-to-idle code and add a debug module parameter to it
to work around a platform firmware issue exposed by that
update (Rafael Wysocki)"
* tag 'acpi-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: s2idle: Add module parameter for LPS0 constraints checking
ACPI: PM: s2idle: Add missing checks to acpi_s2idle_begin_lps0()
Pull sound fixes from Takashi Iwai:
"This became a bit larger than wished for, often seen as a bump at the
middle, but almost all changes are small device-specific fixes, so the
risk must be pretty low.
- SoundWire fix for missing symbol export
- Fixes for device-tree bindings
- A fix for OOB access in USB-audio, spotted by fuzzer
- Quirks for HD-audio, SoundWire, AMD ACP
- A series of ASoC tlv320 and wsa codec fixes
- Other misc fixes in PCM OSS error-handling, Cirrus scodec test,
ASoC ops endianess, davinci, simple-card, and tegra"
* tag 'sound-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits)
ALSA: hda/tas2781: Add newly-released HP laptop
ASoC: rt5640: Fix duplicate clock properties in DT binding
ALSA: hda/realtek: Add quirk for HP Pavilion x360 to enable mute LED
ASoC: tlv320adcx140: fix word length
ASoC: tlv320adcx140: Propagate error codes during probe
ASoC: tlv320adcx140: fix null pointer
ASoC: tlv320adcx140: invert DRE_ENABLE
ASoC: sdw_utils: cs42l43: Enable Headphone pin for LINEOUT jack type
ASoC: sdw_utils: Call init callbacks on the correct codec DAI
soundwire: Add missing EXPORT for sdw_slave_type
ALSA: usb-audio: Prevent excessive number of frames
ALSA: hda/cirrus_scodec_test: Fix test suite name
ALSA: hda/cirrus_scodec_test: Fix incorrect setup of gpiochip
ALSA: hda/realtek: Add quirk for Asus Zephyrus G14 2025 using CS35L56, fix speakers
ASoC: amd: yc: Fix microphone on ASUS M6500RE
ASoC: tegra: Revert fix for uninitialized flat cache warning in tegra210_ahub
ASoC: dt-bindings: rockchip-spdif: Allow "port" node
ASoC: dt-bindings: realtek,rt5640: Allow 7 for realtek,jack-detect-source
ASoC: dt-bindings: realtek,rt5640: Add missing properties/node
ASoC: dt-bindings: realtek,rt5640: Document port node
...
Pull gpio fixes from Bartosz Golaszewski:
"Two more GPIO fixes addressing an issue uncovered by the shared GPIO
management changes in v6.19:
- implement the missing .get_direction() callback for gpio-davinci
- remove redundant check in GPIO core which can also propagate an
invalid errno to user-space"
* tag 'gpio-fixes-for-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: remove redundant callback check
gpio: davinci: implement .get_direction()
Pull printk fix from Petr Mladek:
- Prevent softlockup by restoring IRQs in atomic flush after each
record
* tag 'printk-for-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk/nbcon: Restore IRQ in atomic flush after each emitted record
Pull xfs fixes from Carlos Maiolino:
"Just a few obvious fixes and some 'cosmetic' changes"
* tag 'xfs-fixes-6.19-rc6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: set max_agbno to allow sparse alloc of last full inode chunk
xfs: Fix xfs_grow_last_rtg()
xfs: improve the assert at the top of xfs_log_cover
xfs: fix an overly long line in xfs_rtgroup_calc_geometry
xfs: mark __xfs_rtgroup_extents static
xfs: Fix the return value of xfs_rtcopy_summary()
xfs: fix memory leak in xfs_growfs_check_rtgeom()
Merge fixes related to the energy model management for 6.19-rc6:
- Fix a memory leak in em_create_pd() error path (Malaya Kumar Rout)
- Fix stale description of the cost field in struct em_perf_state to
reflect the current code (Yaxiong Tian)
- Fix and revamp the energy model YNL specification added recently
along with the energy model netlink interface (Changwoo Min)
* pm-em:
PM: EM: Add dump to get-perf-domains in the EM YNL spec
PM: EM: Change cpus' type from string to u64 array in the EM YNL spec
PM: EM: Rename em.yaml to dev-energymodel.yaml
PM: EM: Fix yamllint warnings in the EM YNL spec
PM: EM: Fix memory leak in em_create_pd() error path
PM: EM: Fix incorrect description of the cost field in struct em_perf_state
In the test__props_mismatch() kunit test we rely on the struct mpam_props
being packed to ensure memcmp doesn't consider packing. Making it packed
reduces the alignment of the features bitmap and so breaks a requirement
for the use of atomics. As we don't rely on the set/clear of these bits
being atomic, just make them non-atomic.
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Fixes: 8c90dc68a5 ("arm_mpam: Probe the hardware features resctrl supports")
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
