The driver requests an interrupt handler for the device before it is
fully set up.
For safety, the interrupt handler checks the dev->attached flag to
ensure the device is fully set up, but it currently does that after
dereferencing the dev->read_dev pointer which may be NULL if
dev->attached is false. Move the check to avoid the possible null
pointer dereference.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20260618102949.26607-9-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver requests an interrupt handler for the device before it is
fully set up.
For safety, the interrupt handler checks the dev->attached flag to
ensure the device is fully set up, but it currently does that after
dereferencing the devpriv->dma pointer which may be NULL if
dev->attached is false. Move the dereference of the devpriv->dma
pointer after dev->attached has been checked to avoid the possible null
pointer dereference.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20260618102949.26607-8-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver requests an interrupt handler for the device before it is
fully set up.
For safety, the interrupt handler checks the dev->attached flag to
ensure the device is fully set up, but it currently does that after
dereferencing various pointers which may be NULL if dev->attached is
false. Move the check to avoid the possible null pointer dereferences.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20260618102949.26607-5-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver requests an interrupt handler for the device, after setting
device registers to disable interrupt generation. The interrupt handler
should not be called prematurely unless the user-configured I/O port
base address and/or IRQ number are incorrect or the hardware is bad.
For safety, the interrupt handler checks the dev->attached flag to
ensure the device is fully set up, but it currently does that after
dereferencing dev->read_subdev, which may be NULL if dev->attached is
false. Move the check to avoid the possible null pointer dereference.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20260618102949.26607-4-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
help_init() builds letter_offsets[] by using the first byte of each
function name as an index via `(start & 31) - 1`. If function_names are
overridden from sysfs (root) with a name starting outside [a–z], the
index underflows or exceeds the array, leading to OOB write.
Function names can be overridden with the following commands as root:
modprobe speakup_soft
echo "0 _bad" > /sys/accessibility/speakup/i18n/function_names
# then press Insert+2 on /dev/tty
This fix checks the first letter in help_init(), and if it is not in the
[a–z] range the function returns an error to the caller. Eventually this
error is propagated to drivers/accessibility/speakup/main.c:2217, which
causes a bleep sound.
Fixes: c6e3fd22cd ("Staging: add speakup to the staging directory")
Signed-off-by: Pavel Zhigulin <Pavel.Zhigulin@kaspersky.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://patch.msgid.link/20260531230804.254962-10-samuel.thibault@ens-lyon.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver has a match table for the pci bus wired into its driver
structure, but the table is not exported with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE() entry so module alias information
is generated for automatic module loading.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the driver-owned match table, its use by
the driver registration structure, and the missing module alias
publication.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260704152642.54769-1-pengpeng@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After device_add(), the UIO device is visible to userspace and /dev/uioX
can be opened. If a later setup step fails, __uio_register_device()
unwinds the device but leaves idev->info pointing at the caller-owned
struct uio_info.
That is unsafe when an opener races with the failed registration path.
The open file keeps a reference to the uio_device, while the caller sees
registration failure and may free its struct uio_info. Later file
operations can then follow idev->info and dereference freed memory.
Handle post-device_add() failures like unregister: remove UIO attributes
while the info pointer is still valid, then clear idev->info under
info_lock and wake existing waiters/async users before removing the
device and minor. This makes already-open file descriptors observe the
same "device gone" state as normal uio_unregister_device().
Fixes: a93e7b3315 ("uio: Prevent device destruction while fds are open")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Link: https://patch.msgid.link/20260630192714.1867170-1-dbgh9129@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
... and PCI device helpers.
The various struct pci_device_id arrays were initialized mostly by list
expressions. This isn't easily readable if you're not into PCI.
Use PCI_DEVICE* helper macros and named initializers which is more
explicit and thus easier to parse. Also skip explicit assignments of 0
(which the compiler then takes care of).
The secret plan is to make struct pci_device_id::driver_data an
anonymous union (similar to
https://lore.kernel.org/all/cover.1776579304.git.u.kleine-koenig@baylibre.com/)
and that requires named initializers. But it's also a nice cleanup on
its own.
This change doesn't introduce changes to the compiled pci_device_id
arrays. Tested on x86 and arm64.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260429161453.4154681-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PCI_DEVICE macro and its variants allow to initialize the first four
members of a struct pci_device_id in a bit more compact form and also
with an easier to grasp semantic. Explicit zeros are not needed, the
compiler fills these in automatically.
So convert all array members to such a macro and drop unneeded zeros.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260629165426.3330888-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With GNU inline semantics, an 'extern inline' function is only included
in the build if it can be inlined. When the compiler for some reason
decides against inlining it, this causes a link failure, as observed in
one function in the tnt4882_gpib driver:
ld.lld: error: undefined symbol: mite_irq
>>> referenced by tnt4882_gpib.c:974 (/home/arnd/arm-soc/drivers/gpib/tnt4882/tnt4882_gpib.c:974)
>>> drivers/gpib/tnt4882/tnt4882_gpib.o:(ni_pci_attach) in archive vmlinux.a
Change all of the 'extern inline' definitions in gpib to the regular
'static inline' to avoid this.
Fixes: 0cd5b05551 ("staging: gpib: Add TNT4882 chip based GPIB driver")
Fixes: 6c52d5e3cd ("staging: gpib: Add common include files for GPIB drivers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260611131018.3662609-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the stuck SRQ state update into autopoll_all_devices() and keep it
under big_gpib_mutex. Except for initialization, keep the stuck_srq users
under this mutex.
autopoll_all_devices() is only called by autospoll_thread(), so there is
no need to return to autospoll_thread() and set this state after dropping
big_gpib_mutex.
Without the mutex, a newly opened device can clear stuck_srq and have
that clear overwritten by the previous autospoll result:
autospoll: serial_poll_all() returns 0 and unlocks big_gpib_mutex
open_dev_ioctl: open new device and clear stuck_srq
with big_gpib_mutex held
autospoll: set stuck_srq
That leaves the board marked stuck again after the new device is opened.
autospoll_wait_should_wake_up() then refuses to poll while stuck_srq is
set, so later SRQ handling can be mistakenly suppressed.
Without the mutex, atomic_set() and set_bit() only make individual
updates atomic. They do not order the two updates or make stuck_srq and
status visible as a consistent pair. Taking big_gpib_mutex serializes the
state transition with the other runtime users.
Keep the existing wakeup behavior unchanged and only move the stuck SRQ
state update under the mutex.
Fixes: 9dde4559e9 ("staging: gpib: Add GPIB common core driver")
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://patch.msgid.link/20260522073447.4117690-1-hanguidong02@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Resolves the merge conflicts in:
drivers/android/binder/node.rs
drivers/android/binder/process.rs
As done by linux-next
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The TPM character devices expose a sequential command/response
interface, but their open handlers leave FMODE_PREAD and FMODE_PWRITE
enabled.
After a command leaves a response pending, pread(fd, buf, 16, 0x1400)
passes 0x1400 as *off to tpm_common_read(). The transfer length is
bounded by response_length, but the offset is used unchecked when
forming data_buffer + *off. A sufficiently large offset therefore causes
an out-of-bounds heap read through copy_to_user() and, if the copy
succeeds, an out-of-bounds zero-write through the following memset().
Positional I/O does not provide coherent semantics for this interface.
An arbitrary pread offset cannot represent how much of a response has
been consumed sequentially. The write callback always stores a command
at the start of data_buffer, while pwrite() does not update file->f_pos
and can leave the sequential read cursor stale.
Call nonseekable_open() from both open handlers. This removes
FMODE_PREAD and FMODE_PWRITE, causing positional reads and writes to
fail with -ESPIPE before reaching the TPM callbacks, and explicitly
marks the files non-seekable. Normal read() and write() continue to use
the existing sequential f_pos cursor, leaving the response state machine
unchanged.
Tested on Linux 6.12 with KASAN and a swtpm TPM2 device:
- sequential partial reads returned the complete response
- pread() and preadv() with offset 0x1400 returned -ESPIPE
- pwrite() and pwritev() with offset zero returned -ESPIPE
- the pending response remained intact after the rejected operations
- a subsequent normal command/response cycle completed normally
- no KASAN report was produced.
Fixes: 9488585b21 ("tpm: add support for partial reads")
Link: https://lore.kernel.org/all/20260710090217.191289-1-yong010301@gmail.com/
Cc: stable@vger.kernel.org
Signed-off-by: Jaewon Yang <yong010301@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull staging driver fixes from Greg KH:
"Here are some staging driver fixes for 7.2-rc3 for some reported bugs
in the vme_user and rtl8723bs drivers. These include:
- many rtl8723bs OOB fixes for when connecting to "bad" wifi hosts
- vme_user bugfixes to correctly validate some user-provided data
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: fix OOB reads in rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr()
staging: rtl8723bs: fix OOB reads in is_ap_in_tkip() IE loop
staging: rtl8723bs: fix OOB read in OnAssocRsp() IE loop
staging: rtl8723bs: fix OOB write in HT_caps_handler()
staging: rtl8723bs: fix heap buffer overflow in rtw_cfg80211_set_wpa_ie()
staging: rtl8723bs: fix OOB reads in IE loops in issue_assocreq() and join_cmd_hdl()
staging: rtl8723bs: fix OOB read in update_beacon_info() IE loop
staging: rtl8723bs: fix WEP length underflow and OOB read in OnAuth()
staging: vme_user: fix location monitor leak in tsi148 bridge
staging: vme_user: fix location monitor leak in fake bridge
staging: vme_user: bound slave read/write to the kern_buf size
staging: rtl8723bs: don't drop short TX frames in _rtw_pktfile_read()
Pull Android/IIO fixes from Greg KH:
"Here is a set of bugfixes for 7.2-rc3 that resolve a bunch of reported
issues in just the binder and iio codebases. Included in here are:
- binder driver bugfixes for both the rust and c versions for
reported problems
- lots and lots of iio driver bugfixes for lots of reported issues
(including a hid sensor driver bugfix)
Full details are in the shortlog, all of these have been in linux-next
with no reported issues"
* tag 'char-misc-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (36 commits)
iio: event: Fix event FIFO reset race
iio: imu: inv_icm42600: fix timestamp clock period by using lower value
iio: light: al3010: fix incorrect scale for the highest gain range
iio: adc: nxp-sar-adc: Fix the delay calculation in nxp_sar_adc_wait_for()
iio: light: tsl2591: return actual error from probe IRQ failure
iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading
iio: imu: st_lsm6dsx: deselect shub page before reading whoami
rust_binder: clear freeze listener on node removal
rust_binder: reject context manager self-transaction
rust_binder: use a u64 stride when cleaning up the offsets array
binder: fix UAF in binder_free_transaction()
binder: fix UAF in binder_thread_release()
rust_binder: synchronize Rust Binder stats with freeze commands
binder: cache secctx size before release zeroes it
rust_binder: fix BINDER_GET_EXTENDED_ERROR
iio: adc: ad7779: add missing 'select IIO_TRIGGERED_BUFFER' to Kconfig
iio: adc: ad4130: add missing `select IIO_TRIGGERED_BUFFER` to Kconfig
iio: adc: ti-ads124s08: Return reset GPIO lookup errors
iio: temperature: Build mlx90635 with CONFIG_MLX90635
iio: light: al3320a: add missing REGMAP_I2C to Kconfig
...
Pull tty/serial fixes from Greg KH:
"Here are some small tty/serial/vt fixes for 7.2-rc3 that resolve some
reported problems. Included in here are:
- vt spurious modifier issue that showed up in -rc1 (reported a
bunch)
- 8250 driver bugfixes
- msm serial driver bugfix
- max310x serial driver bugfix
All of these have been in linux-next with no reported issues"
* tag 'tty-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250: Ignore flow control on suspend/resume with no_console_suspend
serial: 8250_mid: Disable DMA for selected platforms
serial: 8250_omap: clear rx_running on zero-length DMA completes
vt: fix spurious modifier in CSI/cursor key sequences
serial: msm: Disable DMA for kernel console UART
serial: max310x: implement gpio_chip::get_direction()
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for many reported issues.
Included in here are:
- usb serial driver corruption and use-after-free fixes
- usb gadget rndis bugfixes for malicious/buggy host connections
- typec driver fixes for a load of different tiny reported issues
- typec mux driver revert for a broken patch in -rc1
- usb gadget driver fixes for many different reported problems
- new usb device quirks added
- usbip tool fixes and some core usbip fixes as well
- dwc3 driver fixes for minor issues
- xhci driver fixes for reported problems
- lots of other tiny usb driver fixes for many tiny issues
All of these have been in linux-next with no reported issues"
* tag 'usb-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (56 commits)
USB: core: ratelimit cabling message
usb: misc: usbio: fix disconnect UAF in client teardown
Revert "usb: typec: mux: avoid duplicated mux switches"
USB: chaoskey: Fix slab-use-after-free in chaoskey_release()
usb: ucsi: huawei_gaokun: move typec_altmode off stack
usb: typec: tcpci_rt1711h: unregister TCPCI port with devres
usb: typec: tcpm: Fix VDM type for Enter Mode commands
usb: typec: ucsi: cancel pending work on system suspend
usb: typec: class: drop PD lookup reference
usb: typec: ps883x: Fix DP+USB3 configuration
usb: xhci: Fix sleep in atomic context in xhci_free_streams()
xhci: sideband: fix ring sg table pages leak
usb: gadget: udc: Fix use-after-free in gadget_match_driver
usb: dwc3: run gadget disconnect from sleepable suspend context
usb: sl811-hcd: disable controller wakeup on remove
usb: typec: anx7411: use devm_pm_runtime_enable()
usb: dwc3: fix dwc3_readl() and dwc3_writel() calls in dwc3_ulpi_setup()
USB: misc: uss720: unregister parport on probe failure
usb: gadget: function: rndis: add length check for header
usb: gadget: function: rndis: add length check to response query
...
Pull s390 fixes from Vasily Gorbik:
- Fix missing array_index_nospec() call in diag310 memory topology code
to prevent speculative execution with a user controlled array index
- Fix get_align_mask() return type to match vm_unmapped_area_info
align_mask, avoiding possible truncation for future larger masks
- Remove empty zcrypt CEX2 files left over after CEX2 and CEX3 driver
removal
- Add build salt to the vDSO so it gets a unique build id, similar to
the kernel and modules
* tag 's390-7.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: Add build salt to the vDSO
s390/zcrypt: Remove the empty file
s390/mm: Fix type mismatch in get_align_mask().
s390/diag: Add missing array_index_nospec() call to memtop_get_page_count()
Pull RISC-V fixes from Paul Walmsley:
"The most notable change involves the rseq kselftest common Makefile
(as it is not RISC-V-specific). The basic approach in the patch
appears similar to one used in the KVM and S390 selftests (grep for
LINUX_TOOL_ARCH_INCLUDE and SUBARCH), and the rseq kselftests pass a
quick build test on x86 after this.
- Avoid a null pointer deference in machine_kexec_prepare() that the
IMA subsystem can trigger
- Bypass libc in part of the ptrace_v_not_enabled kselftest to avoid
noise from child atfork handlers that libc might run
- Include Kconfig support for UltraRISC SoCs, already referenced by
some device drivers; and enable it in our defconfig
- Fix the build of the rseq kselftest for RISC-V by borrowing a
technique from the KVM and S390 kselftests that includes
arch-specific header files from tools/arch/<arch>/include
- Fix some memory leaks in the RISC-V vector ptrace kselftests
- Clean up some DT bindings and hwprobe documentation"
* tag 'riscv-for-linus-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
selftests/riscv: ptrace: Fix memory leak of regset_data in vector tests
selftests/rseq: Fix a building error for riscv arch
riscv: defconfig: enable ARCH_ULTRARISC
riscv: add UltraRISC SoC family Kconfig support
riscv: hwprobe.rst: Document EXT_ZICFISS and EXT_ZICFILP
riscv: hwprobe.rst: Make indentation consistent
dt-bindings: riscv: sort multi-letter Z extensions alphanumerically
selftests: riscv: Bypass libc in inactive vector ptrace test
riscv: Prevent NULL pointer dereference in machine_kexec_prepare()
Pull m68knommu fix from Greg Ungerer:
"Fix incorrectly updated local SoC IO access function names.
Testing didn't pick them up because there was no specific defconfig
for these particular SoC parts. New defconfigs will be introduced in
the next merge cycle to remedy that"
* tag 'm68knommu-fixes-on-top-off-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: coldfire: fix breakage of missed IO access updates
Pull tracing fixes from Steven Rostedt:
- Free field in error path of synthetic event parse
In __create_synth_event() the field was allocated but was not freed
in the error path
- Fix ring_buffer_event_length() on 8 byte aligned architectures
On architectures with CONFIG_HAVE_64BIT_ALIGNED_ACCESS set to y, the
ring_buffer_event_length() may return the wrong size. This is because
archs with that config set will always use the "big event meta
header" as that is 8 bytes keeping the payload 8 bytes aligned, even
when a 4 byte header could hold the size of the event
But ring_buffer_event_length() doesn't take this into account and
only subtracts 4 bytes for the meta header in the length when it
should have subtracted 8 bytes
- Have osnoise wait for a full rcu synchronization on unregister
osnoise_unregister_instance() used to call synchronize_rcu() before
freeing its copy of the instance but was switched to kfree_rcu(). The
osniose tracer has code that traverses the instances that it uses,
and inst is just a pointer to that instance. By using kfree_rcu()
instead of synchronize_rcu(), the instance that the inst pointer is
pointing to can be freed while the osnoise code is still referencing
it
That is, a rmdir on an instance first unregisters the tracer. When
the unregister finishes, the rmdir expects that the tracer is
finished with the instance that it is using. By putting back the
synchronize_rcu() in osnoise_unregister_instance() the unregistering
of osnoise will now return when all the users of the instance have
finished
- Remove an unused setting of "ret" in tracing_set_tracer()
- Fix ring_buffer_read_page() copying events
The commit that changed ring_buffer_read_page() to show dropped
events from the buffer itself, split the "commit" variable between
the commit value (with flags) and "size" that holds the size of the
sub-buffer. A cut and paste error changed the test of the reading
from checking the size of the buffer to the size of the event causing
reads to only read one event at a time
- Make tracepoint_printk a static variable
When the tracing sysctl knobs were move from sysctl.c to trace.c, the
variable tracepoint_printk no longer needed to be global. Make it
static
- Fix some typos
- Fix NULL pointer dereference in func_set_flag()
The flags update of the function tracer first checks if the value of
the flag is the same and exits if they are, and then it checks if the
current tracer is the function tracer and exits if it isn't. The
problem is that these checks need to be in a reversed order, as if
the tracer isn't the function tracer, then the flag being checked may
not exist. Reverse the order of these checks
- Fix ufs core trace events to not dereference a pointer in TP_printk()
The TP_printk() part of the TRACE_EVENT() macro is called when the
user reads the "trace" file. This can be seconds, minutes, hours,
days, weeks, and even months after the data was recorded into the
ring buffer. Thus, saving a pointer to an object into the ring buffer
and then dereferencing it from TP_printk() can cause harm as the
object the pointer is pointing to may no longer exist
Fix all the trace events in ufs core to save the device name in the
ring buffer instead of dereferencing the device descriptor from
TP_printk()
- Prevent out-of-bound reads in glob matching of trace events
The filter logic of events allows simple glob logic to add wild cards
to filter on strings. But some events have fields that may not have a
terminating 'nul' character. This may cause the glob matching to go
beyond the string. Change the logic to always pass in the length of
the field that is being matched
- Add no-rcu-check version of trace_##event##_enabled()
The trace_##event##_enabled() usually wraps trace events to do extra
work that is only needed when the trace event is enabled. But this
can hide events that are placed in locations where RCU is not
watching, and can make lockdep not see these bugs when the event is
not enabled
The trace_##event##_enabled() was updated to always test to make sure
RCU is watching to catch locations that may call events without RCU
being active
This caused a false positive for the irq_disabled() and related
events. As that use trace_irq_disabled_enabled() to force RCU to be
watching when the event is enabled via the ct_irq_enter() function,
calls the event, and then calls ct_irq_exit() to put RCU back to its
original state
The trace_irq_disabled_enabled() should not trigger a warning when
RCU is not watching because the code within its block handles the
case properly. Make a __trace_##event##_enabled() version for this
event to use that doesn't check RCU is watching as it handles the
case when it isn't
- Fix use-after-free in user_event_mm_dup()
When the enabler is removed from the link list, it is freed
immediately. But it is protected via RCU and needs to be freed after
an RCU grace period. Use queue_rcu_work() so that the event_mutex can
also be taken as user_event_put() takes the mutex on the last
reference is released
- Free type string in error path of parse_synth_field()
There's an error path in parse_synth_field() where the allocated type
string is not freed
- Add selftest that tests deferred event teardown
- Fix leak in error path of trace_remote_alloc_buffer()
If page allocation fails, the desc->nr_cpus is not incremented for
the current CPU and the allocations done for it are not freed
- Fix allocation length in trace_remote_alloc_buffer()
The logic to calculate the struct_len was doing a double count and
setting the value too large. Calculate the size upfront to fix the
error and simplify the logic
- Fix sparse CPU masks in ring_buffer_desc()
If there are sparse CPUs (gaps in the numbering), the
ring_buffer_desc() will fail as it tests the CPU number against the
number of CPUs that are used
* tag 'trace-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Allow sparse CPU masks in ring_buffer_desc()
tracing/remotes: Fix struct_len in trace_remote_alloc_buffer()
tracing/remotes: Fix leak in trace_remote_alloc_buffer() error path
selftests/user_events: Wait for deferred event teardown after unregister
tracing/synthetic: Free type string on error path
tracing/user_events: Fix use-after-free in user_event_mm_dup()
tracing: Add a no-rcu-check version of trace_##event##_enabled()
tracing: Prevent out-of-bounds read in glob matching
ufs: core: tracing: Do not dereference pointers in TP_printk()
tracing: Fix NULL pointer dereference in func_set_flag()
samples: ftrace: Fix typos in benchmark comment
tracing: Make tracepoint_printk static as not exported
ring-buffer: Fix ring_buffer_read_page() copying only one event per page
tracing: Remove unused ret assignment in tracing_set_tracer()
tracing/osnoise: Call synchronize_rcu() when unregistering
ring-buffer: Fix event length with forced 8-byte alignment
tracing/synthetic: Free pending field on error path
Pull input fixes from Dmitry Torokhov:
- fix MELFAS MMS114 touchscreen driver to reject invalid touch IDs and
avoid multi-touch slot corruption
- fix a crash in the Sega Dreamcast (Maple) mouse driver when opening
the device, caused by missing driver data
- fixes for Maple drivers (keyboard, mouse, joystick) to properly order
setting driver data and device registration to avoid races
* tag 'input-for-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: mms114 - fix multi-touch slot corruption
Input: maple_keyb - set driver data before registering input device
Input: maplecontrol - set driver data before registering input device
Input: maplemouse - set driver data before registering input device
Input: maplemouse - fix NULL pointer dereference in open()
Pull device mapper fixes from Mikulas Patocka:
- dm-log: fix overflow on 32-bit machines
- dm-era: fix out of bounds memory access; fix crashes on invalid args
- dm-verity: fix buffer overflow in forward error correction
- dm-thin: fix misbehavior on I/O failures
- dm-pcache: fix NULL pointer dereference on invalid arguments
- dm-inlinecrypt: fix memory leak on error handling
- dm-integrity: fix ignoring the 'fix_hmac' option on device open
- dm: don't store the keyring in memory for a long term
- 12 miscellaneous fixes for bugs found by Claude Opus 4.6
* tag 'for-7.2/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (23 commits)
dm thin metadata: fix superblock refcount leak on snapshot shadow failure
dm-stats: fix dm_jiffies_to_msec64
dm-stats: fix merge accounting
dm-bufio: fix wrong count calculation in dm_bufio_issue_discard
dm-verity: make error counter atomic
dm-verity: increase sprintf buffer size
dm-verity: fix a possible NULL pointer dereference
dm-verity: avoid double increment of &use_bh_wq_enabled
dm-ioctl: fix a possible overflow in list_version_get_info
dm_early_create: fix freeing used table on dm_resume failure
dm-integrity: fix a bug if the bio is out of limits
dm-integrity: don't increment hash_offset twice
dm-integrity: fix leaking uninitialized kernel memory
dm-integrity: fix the 'fix_hmac' option
dm era: fix error code propagation in era_ctr()
dm era: fix NULL pointer dereference in metadata_open()
dm: avoid leaking the caller's thread keyring via the table device file
dm-inlinecrypt: Fix an error handling path in inlinecrypt_ctr()
dm-pcache: reject option groups without values
dm thin metadata: fix metadata snapshot consistency on commit failure
...
Ian Abbott
Shashwat Agrawal
Haoxiang Li
Francisco Maestre
Bastien Nocera
Bo Liu
Pavel Zhigulin
Xichao Zhao
Jagadeesh Yalapalli
liujing
bajing
Christophe JAILLET
Xu Panda
Li zeming
Colin Ian King
Pengpeng Hou
Yuho Choi
Uwe Kleine-König (The Capable Hub)
Mohammad Shahid
Zenghui Yu
Arnd Bergmann
Gui-Dong Han
Alexander A. Klimov
Dominik Karol Piątkowski
Greg Kroah-Hartman
Linus Torvalds
Jaewon Yang