commit 151edde741 upstream.
tsi148_probe() allocates a location monitor resource and links it into
tsi148_bridge->lm_resources. The probe error path frees this list, but
tsi148_remove() only frees the dma, slave and master resource lists, so
the location monitor resource is leaked on device unbind or module
unload.
Free the lm_resources list in tsi148_remove() as well, before
tsi148_bridge is freed.
Fixes: d22b8ed9a3 ("Staging: vme: add Tundra TSI148 VME-PCI Bridge driver")
Cc: stable <stable@kernel.org>
Cc: Martyn Welch <martyn@welchs.me.uk>
Assisted-by: Claude:claude-fable-5
Signed-off-by: Hao-Qun Huang <alvinhuang0603@gmail.com>
Link: https://patch.msgid.link/20260704065817.403111-2-alvinhuang0603@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e8422d89e8 upstream.
fake_init() allocates a location monitor resource and links it into
fake_bridge->lm_resources. The init error path frees this list, but
fake_exit() only frees the slave and master resource lists. Loading
and unloading the module therefore triggers a kmemleak warning:
unreferenced object 0xffff8b8b82aebe40 (size 64):
comm "init", pid 1, jiffies 4294894572
backtrace (crc c1e013ef):
kmemleak_alloc+0x4e/0x90
__kmalloc_cache_noprof+0x338/0x430
0xffffffffc0602246
do_one_initcall+0x4f/0x320
do_init_module+0x68/0x270
load_module+0x2a3b/0x2d90
Free the lm_resources list in fake_exit() as well, before fake_bridge
is freed.
Fixes: 658bcdae9c ("vme: Adding Fake VME driver")
Cc: stable <stable@kernel.org>
Cc: Martyn Welch <martyn@welchs.me.uk>
Assisted-by: Claude:claude-fable-5
Signed-off-by: Hao-Qun Huang <alvinhuang0603@gmail.com>
Link: https://patch.msgid.link/20260704065817.403111-1-alvinhuang0603@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53b7c271f0 upstream.
smb2_check_message() has a long-standing quirk that accepts a response
whose calculated length is one byte larger than the bytes actually
received ("server can return one byte more due to implied bcc[0]").
This was introduced to accommodate servers that omit the trailing bcc[0]
overlap byte when no data area is present.
However, the exemption is applied unconditionally, regardless of whether
the command actually carries a data area (has_smb2_data_area[]). When a
response with a data area is subject to the +1 exemption, the reported
data can extend one byte beyond the bytes actually received, yet
smb2_check_message() still accepts it. The subsequent decoder then reads
past the end of the receive buffer. This is reachable during NEGOTIATE
and SESSION_SETUP, before the session is established.
The resulting out-of-bounds reads are visible under KASAN when mounting
against a non-conforming server; both the SPNEGO/negTokenInit and the
NTLMSSP challenge decoders are affected:
BUG: KASAN: slab-out-of-bounds in asn1_ber_decoder+0x16a7/0x1b00
Read of size 1 at addr ffff8880084d67c0 by task mount.cifs/81
CPU: 1 UID: 0 PID: 81 Comm: mount.cifs Not tainted 7.1.0-rc6 #1
Call Trace:
<TASK>
dump_stack_lvl+0x4e/0x70
print_report+0x157/0x4c9
kasan_report+0xce/0x100
asn1_ber_decoder+0x16a7/0x1b00
decode_negTokenInit+0x19/0x30
SMB2_negotiate+0x31d9/0x4c90
cifs_negotiate_protocol+0x1f2/0x3f0
cifs_get_smb_ses+0x93f/0x17e0
cifs_mount_get_session+0x7f/0x3a0
cifs_mount+0xb4/0xcf0
cifs_smb3_do_mount+0x23a/0x1500
smb3_get_tree+0x3b0/0x630
vfs_get_tree+0x82/0x2d0
fc_mount+0x10/0x1b0
path_mount+0x50d/0x1de0
__x64_sys_mount+0x20b/0x270
do_syscall_64+0xee/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 85:
kmem_cache_alloc_noprof+0x106/0x380
mempool_alloc_noprof+0x116/0x1e0
cifs_small_buf_get+0x31/0x80
allocate_buffers+0x10d/0x2b0
cifs_demultiplex_thread+0x1d5/0x1d50
kthread+0x2c6/0x390
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30
The buggy address is located 0 bytes to the right of
allocated 448-byte region [ffff8880084d6600, ffff8880084d67c0)
which belongs to the cache cifs_small_rq of size 448
BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x36/0x50
Read of size 329 at addr ffff88800726c678 by task mount.cifs/89
CPU: 0 UID: 0 PID: 89 Comm: mount.cifs Tainted: G B 7.1.0-rc6 #1
Call Trace:
<TASK>
dump_stack_lvl+0x4e/0x70
print_report+0x157/0x4c9
kasan_report+0xce/0x100
kasan_check_range+0x10f/0x1e0
__asan_memcpy+0x23/0x60
kmemdup_noprof+0x36/0x50
decode_ntlmssp_challenge+0x457/0x680
SMB2_sess_auth_rawntlmssp_negotiate+0x6f0/0xcb0
SMB2_sess_setup+0x219/0x4f0
cifs_setup_session+0x248/0xaf0
cifs_get_smb_ses+0xf79/0x17e0
cifs_mount_get_session+0x7f/0x3a0
cifs_mount+0xb4/0xcf0
cifs_smb3_do_mount+0x23a/0x1500
smb3_get_tree+0x3b0/0x630
vfs_get_tree+0x82/0x2d0
fc_mount+0x10/0x1b0
path_mount+0x50d/0x1de0
__x64_sys_mount+0x20b/0x270
do_syscall_64+0xee/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 93:
kmem_cache_alloc_noprof+0x106/0x380
mempool_alloc_noprof+0x116/0x1e0
cifs_small_buf_get+0x31/0x80
allocate_buffers+0x10d/0x2b0
cifs_demultiplex_thread+0x1d5/0x1d50
kthread+0x2c6/0x390
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30
The buggy address is located 120 bytes inside of
allocated 448-byte region [ffff88800726c600, ffff88800726c7c0)
which belongs to the cache cifs_small_rq of size 448
Restrict the +1 exemption to responses that have no data area, so that
it still covers the bcc[0] omission it was meant for. When a data area
is present, the +1 discrepancy instead means the reported data length
overruns the received buffer, so the response must be rejected.
Fixes: 093b2bdad3 ("CIFS: Make demultiplex_thread work with SMB2 code")
Cc: stable@vger.kernel.org
Signed-off-by: Shoichiro Miyamoto <shoichiro.miyamoto@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f32f38265 upstream.
The SLAVE-path helpers buffer_to_user() and buffer_from_user() copy
'count' bytes into/out of the fixed-size kern_buf (size_buf ==
PCI_BUF_SIZE == 0x20000, 128 KiB) using *ppos as the offset, without
bounding *ppos + count against size_buf.
vme_user_write()/vme_user_read() only clamp count to the VME window size
(image_size = vme_get_size(resource)), which VME_SET_SLAVE sets from the
user-supplied slave.size -- validated against the VME address space (up
to VME_A32_MAX = 4 GiB), not against PCI_BUF_SIZE. When the window
exceeds 128 KiB, a write()/read() copies past the kern_buf allocation.
Clamp count against size_buf in both helpers, with an early return when
*ppos is already at/after the buffer end. *ppos is >= 0 here (the caller
rejects negative offsets), so size_buf - *ppos cannot wrap. This mirrors
the existing clamp in the MASTER-path helpers resource_to_user() /
resource_from_user(), and matches the read()/write() convention of a
short transfer at end-of-buffer.
Found by static analysis (CodeQL taint tracking + CBMC bounded model
checking) and confirmed dynamically under KASAN with the vme_fake bridge:
BUG: KASAN: slab-out-of-bounds in _copy_from_user+0x2d/0x80
Write of size 262144 at addr ffff888004100000 by task trigger/68
_copy_from_user+0x2d/0x80
vme_user_write+0x13e/0x240 [vme_user]
vfs_write+0x1b8/0x7a0
ksys_write+0xb8/0x150
Fixes: f00a86d98a ("Staging: vme: add VME userspace driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Michael Tautschnig <tautschn@amazon.com>
Link: https://patch.msgid.link/20260618114709.72499-1-tautschn@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b66974a1b upstream.
A broadcast PROTOCOL/STATE_MSG can carry a Gap ACK blocks record in its
data area. tipc_get_gap_ack_blks() only verifies that the record's len
field is self-consistent with its ugack_cnt/bgack_cnt counts
(sz == struct_size(p, gacks, ugack_cnt + bgack_cnt)); it does not check
that the record actually fits in the message data area, msg_data_sz().
The unicast caller tipc_link_proto_rcv() bounds it ("if (glen > dlen)
break;"), but the broadcast caller tipc_bcast_sync_rcv() discards the
returned size, so tipc_link_advance_transmq() copies the record off the
receive skb with an attacker-controlled count:
this_ga = kmemdup(ga, struct_size(ga, gacks, ga->bgack_cnt),
GFP_ATOMIC);
A TIPC neighbour that negotiated TIPC_GAP_ACK_BLOCK triggers it with one
ordinary broadcast STATE_MSG (msg_bc_ack_invalid() clear), sized so its
data area is short, carrying a Gap ACK record with len = 0x400,
bgack_cnt = 0xff and ugack_cnt = 0. len then equals
struct_size(p, gacks, 255), so the consistency check passes and ga is
non-NULL; kmemdup() reads struct_size(ga, gacks, 255) = 1024 bytes out
of the much smaller skb:
BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x48/0x60
Read of size 1024 at addr ffff0000c7030d38 by task poc864/69
Call trace:
kmemdup_noprof+0x48/0x60
tipc_link_advance_transmq+0x86c/0xb80
tipc_link_bc_ack_rcv+0x19c/0x1e0
tipc_bcast_sync_rcv+0x1c4/0x2c4
tipc_rcv+0x85c/0x1340
tipc_l2_rcv_msg+0xac/0x104
The buggy address belongs to the object at ffff0000c7030d00
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 56 bytes inside of
allocated 704-byte region [ffff0000c7030d00, ffff0000c7030fc0)
The copied-out bytes are subsequently consumed as gap/ack values, but
the read is already out of bounds at the kmemdup() regardless of how
they are used.
The unicast STATE path drops such a message: "if (glen > dlen) break;"
skips the rest of STATE_MSG handling and the skb is freed. Make the
broadcast path drop it too. tipc_bcast_sync_rcv() now bounds the record
against msg_data_sz() and, when it does not fit, reports it back through
tipc_node_bc_sync_rcv() to tipc_rcv() so the skb is discarded rather than
processed. ga is not cleared on this path: ga == NULL already means
"legacy peer without Selective ACK", a distinct legitimate state.
Fixes: d7626b5acf ("tipc: introduce Gap ACK blocks for broadcast link")
Cc: stable@vger.kernel.org
Signed-off-by: Samuel Page <sam@bynar.io>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20260625143815.1525412-1-sam@bynar.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1720db928e upstream.
lowpan_nhc_do_uncompression() looks up an NHC descriptor while holding
lowpan_nhc_lock. If the descriptor has no uncompress callback, the error
path drops the lock before printing nhc->name.
lowpan_nhc_del() removes descriptors under the same lock and then relies
on synchronize_net() before the owning module can be unloaded. That only
waits for net RX RCU readers. lowpan_header_decompress() is also exported
and can be reached from callers that are not necessarily covered by the net
core RX critical section, for example the Bluetooth 6LoWPAN L2CAP receive
path.
This leaves a race where one task drops lowpan_nhc_lock in the error path,
another task unregisters and frees the matching descriptor after
synchronize_net() returns, and the first task then dereferences nhc->name
for the warning.
With the post-unlock window widened, KASAN reports:
BUG: KASAN: slab-use-after-free in lowpan_nhc_do_uncompression+0x1f4/0x220
Read of size 8
lowpan_nhc_do_uncompression
lowpan_header_decompress
Fix this by printing the warning before dropping lowpan_nhc_lock, so the
descriptor name is read while unregister is still excluded. The malformed
packet is still rejected with -ENOTSUPP.
Fixes: 92aa7c65d2 ("6lowpan: add generic nhc layer interface")
Cc: stable@vger.kernel.org
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Reported-by: Ao Wang <wangao@seu.edu.cn>
Reported-by: Xuewei Feng <fengxw06@126.com>
Reported-by: Qi Li <qli01@tsinghua.edu.cn>
Reported-by: Ke Xu <xuke@tsinghua.edu.cn>
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://patch.msgid.link/20260609080054.4541-1-zhaoyz24@mails.tsinghua.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 010382937f upstream.
dwc3_gadget_suspend() takes dwc->lock with IRQs disabled and then calls
dwc3_disconnect_gadget(). For async callbacks that helper only uses
plain spin_unlock()/spin_lock(), so the gadget ->disconnect() callback
still runs with IRQs disabled and any sleepable callback trips Lockdep.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the dwc3_gadget_suspend() ->
dwc3_disconnect_gadget() -> gadget_driver->disconnect() chain, and
Lockdep reported:
BUG: sleeping function called from invalid context
gadget_disconnect+0x21/0x39 [vuln_msv]
dwc3_gadget_suspend.constprop.0+0x2b/0x42 [vuln_msv]
Keep the disconnect callback selection in one common helper, but add a
sleepable suspend-side wrapper which snapshots the callback under
dwc->lock and then runs it after spin_unlock_irqrestore(). The regular
event path still uses the existing spin_unlock()/spin_lock() window.
Fixes: c8540870af ("usb: dwc3: gadget: Improve dwc3_gadget_suspend() and dwc3_gadget_resume()")
Cc: stable <stable@kernel.org>
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260612052005.3849659-1-runyu.xiao@seu.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit abf76d3239 upstream.
The chaoskey driver has a use-after-free bug in its release routine.
If the user closes the device file after the USB device has been
unplugged, a debugging log statement will try to access the
usb_interface structure after it has been deallocated:
BUG: KASAN: slab-use-after-free in dev_driver_string (drivers/base/core.c:2406)
Read of size 8 at addr ffff888168e8a0b8 by task chaoskey_raw_re/10106
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
dev_driver_string (drivers/base/core.c:2406)
__dynamic_dev_dbg (lib/dynamic_debug.c:906)
chaoskey_release (drivers/usb/misc/chaoskey.c:323)
__fput (fs/file_table.c:510)
fput_close_sync (fs/file_table.c:615)
__x64_sys_close (fs/open.c:1507 fs/open.c:1492 fs/open.c:1492)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
The driver's last reference to the interface structure is dropped in
the chaoskey_free() routine, so the code must not use the interface --
even in a debugging statement -- after that routine returns.
(Exception: If we know that another reference is held by someone else,
such as the device core while the disconnect routine runs, there's no
problem. Thanks to Johan Hovold for pointing this out.)
Since the bad access is part of an unimportant debugging statement,
we can fix the problem simply by removing the whole statement.
Reported-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
Closes: https://lore.kernel.org/linux-usb/20EC9664-054E-438B-B411-2145D347F97B@gmail.com/
Tested-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: 66e3e59189 ("usb: Add driver for Altus Metrum ChaosKey device (v2)")
Cc: stable <stable@kernel.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/bb5b1dc6-eb59-43e1-8d26-51e658e88bbe@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e3046eeada upstream.
random_recv_done() stores the device-reported used.len directly into
vi->data_avail. copy_data() then indexes vi->data[] using
vi->data_idx (advanced by previous copy_data() calls) and issues a
memcpy() without re-validating either value against the posted
buffer size sizeof(vi->data) (SMP_CACHE_BYTES bytes, typically 32
or 64).
A malicious or buggy virtio-rng backend can set used.len beyond
sizeof(vi->data), steering the memcpy() past the end of the inline
array into adjacent kmalloc-1k slab bytes. hwrng_fillfn() mixes
those bytes into the guest RNG, and guest root can also observe
them directly via /dev/hwrng.
Concrete impact is inside the guest:
- Memory-safety / hardening: any virtio-rng backend that
over-reports used.len causes the driver to read past vi->data
into unrelated slab contents. hwrng_fillfn() is a kernel thread
that runs as soon as the device is probed; no guest userspace
interaction is required to first-trigger the OOB.
- Cross-boundary leak (confidential-compute threat model): a
malicious hypervisor cooperating with a malicious or compromised
guest root userspace can use /dev/hwrng as a leak channel for
guest-kernel heap data. The host sets a large used.len, guest
root reads /dev/hwrng, and the returned bytes contain guest
kernel slab contents that were adjacent to vi->data. In
practice, confidential-compute guests (SEV-SNP, TDX) usually
disable virtio-rng entirely, so this path is narrow, but the
fix is still worth carrying because the underlying
memory-safety bug contaminates the guest RNG on any host.
KASAN confirms the OOB on a 7.1-rc4 guest whose virtio-rng backend
has been patched to report used.len = 0x10000:
BUG: KASAN: slab-out-of-bounds in virtio_read+0x394/0x5d0
Read of size 64 at addr ffff88800ae0ba20 by task hwrng/52
Call Trace:
__asan_memcpy+0x23/0x60
virtio_read+0x394/0x5d0
hwrng_fillfn+0xb2/0x470
kthread+0x2cc/0x3a0
Allocated by task 1:
probe_common+0xa5/0x660
virtio_dev_probe+0x549/0xbc0
The buggy address belongs to the object at ffff88800ae0b800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 0 bytes to the right of
allocated 544-byte region [ffff88800ae0b800, ffff88800ae0ba20)
Same class of bug as commit c04db81cd0 ("net/9p: Fix buffer
overflow in USB transport layer"), which hardened
usb9pfs_rx_complete() against unchecked device-reported length in
the USB 9p transport.
With the clamp at point of use and array_index_nospec() in place,
the same harness boots cleanly: copy_data() returns zero for the
bogus report, the device-supplied bytes after data_idx are
discarded, and the driver issues a fresh request.
Fixes: f7f510ec19 ("virtio: An entropy device, as suggested by hpa.")
Cc: stable@vger.kernel.org
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260531142251.2792061-1-michael.bommarito@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c687bc3569 upstream.
Driver core expects devices to be allocated dynamically and complains
loudly when a device that lacks a release function is freed.
Use __root_device_register() to allocate and register the root device
instead of open coding using a static device.
Note that root_device_register(), which also creates a link to the
module, cannot be used as the device is registered when parsing the
module parameters which happens before the module kobject has been set
up.
Fixes: 81a054ce0b ("virtio-mmio: Devices parameter parsing")
Cc: stable@vger.kernel.org # 3.5
Cc: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260427143710.14702-1-johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7cd9103283 upstream.
The release path of ip_set_dump_do() and ip_set_dump_done() read
inst->ip_set_list via ip_set_ref_netlink(), a plain rcu_dereference_raw()
of the array pointer. These run from netlink_recvmsg() without the nfnl
mutex and without an RCU read-side critical section.
A concurrent ip_set_create() can grow the array: it publishes the new
array, calls synchronize_net() and then kvfree()s the old one. Since the
dump paths read the array outside any RCU reader, synchronize_net() does
not wait for them and the old array can be freed while they still index
into it, causing a use-after-free.
The dumped set itself stays pinned via set->ref_netlink, so only the
array load needs protecting. Take rcu_read_lock() around it, matching
ip_set_get_byname() and __ip_set_put_byindex().
BUG: KASAN: slab-use-after-free in ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697)
Read of size 8 at addr ffff88800b5c4018 by task exploit/150
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697)
netlink_dump (net/netlink/af_netlink.c:2325)
netlink_recvmsg (net/netlink/af_netlink.c:1976)
sock_recvmsg (net/socket.c:1159)
__sys_recvfrom (net/socket.c:2315)
...
Oops: general protection fault, probably for non-canonical address ... KASAN NOPTI
KASAN: maybe wild-memory-access in range [0x02d6...d0-0x02d6...d7]
RIP: 0010:ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1698)
Kernel panic - not syncing: Fatal exception
Fixes: 8a02bdd50b ("netfilter: ipset: Fix calling ip_set() macro at dumping")
Cc: stable@vger.kernel.org
Reported-by: Weiming Shi <bestswngs@gmail.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35d4a3cf70 upstream.
Fix three issues in damon_hot_score() that comes from wrong handling of
extreme (zero or too high) monitoring intervals user setup.
When the user sets sampling interval zero, damon_max_nr_accesses(), which
is called from damon_hot_score(), causes a divide-by-zero. Needless to
say, it is a problem.
When the user sets the aggregation interval zero, the function returns
zero. It is wrong, since the real maximum nr_acceses in the setup should
be one. Worse yet, it can cause another divide-by-zero from its caller,
damon_hot_score(), since it uses damon_max_nr_accesses() return value as a
denominator.
When the user sets the aggregation interval very high, damon_hot_score()
could return a value out of [0, DAMOS_MAX_SCORE] range. Since the return
value is used as an index to the regions_score_histogram array, which is
DAMOS_MAX_SCORE+1 size, it causes out of bounds array access.
The issues can be relatively easily reproduced like below. The sysfs
write permission is required, though.
# ./damo start --damos_action lru_prio --damos_quota_space 100M \
--damos_quota_interval 1s
# cd /sys/kernel/mm/damon/admin/kdamonds/0
# echo 0 > contexts/0/monitoring_attrs/intervals/sample_us
# echo 0 > contexts/0/monitoring_attrs/intervals/aggr_us
# echo commit > state
# dmesg
[...]
[ 131.329762] Oops: divide error: 0000 [#1] SMP NOPTI
[...]
[ 131.336089] RIP: 0010:damon_hot_score+0x27/0xd0
[...]
Fix the divide-by-zero intervals problems by explicitly handling the zero
intervals in damon_max_nr_accesses(). Fix the out-of-bound array access
by applying [0, DAMOS_MAX_SCORE] bounds before returning from
damon_hot_score().
The issue was discovered [1] by Sashiko.
Link: https://lore.kernel.org/20260623135834.67189-1-sj@kernel.org
Link: https://lore.kernel.org/20260619202459.145010-1-sj@kernel.org [1]
Fixes: 198f0f4c58 ("mm/damon/vaddr,paddr: support pageout prioritization")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 5.16.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fda8749ba7 upstream.
pci_host_common_init() is used by several generic ECAM host drivers.
After PCI core changes around pci_flags and preserve_config, these hosts
no longer opted into full bus number reassignment the way they did
before, which broke enumeration of devices on a Marvell CN106XX board.
When PCI_PROBE_ONLY is not set, add PCI_REASSIGN_ALL_BUS so
pci_scan_bridge_extend() takes the reassignment path: bus numbers can be
assigned from firmware EA data (e.g. pci_ea_fixed_busnrs()). Skip the
flag in probe-only mode so existing assignments are not overridden.
Fixes: 7246a4520b ("PCI: Use preserve_config in place of pci_flags")
Closes: https://lore.kernel.org/all/abkqm_LCd9zAM8cW@rkannoth-OptiPlex-7090/
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
[mani: added stable tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: add problem report link]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Cc: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260414081730.3864372-1-rkannoth@marvell.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ef4bac021 upstream.
altera_pcie_irq_teardown() calls irq_dispose_mapping() on pcie->irq.
However, pcie->irq is the parent IRQ returned by platform_get_irq(), not
the mapping created by Altera INTx irq_domain.
The Altera driver only sets the chained handler on the parent IRQ. It
should detach that handler during teardown, but it should not dispose the
parent IRQ mapping, which belongs to the parent interrupt controller's
irq_domain.
Drop irq_dispose_mapping(pcie->irq) from the teardown path.
Note that during irqchip remove(), the child IRQs should've disposed. But
since the chained handler itself is removed, there is no way the stale
child IRQs (if exists) could fire. So it is safe here.
Fixes: ec15c4d0d5 ("PCI: altera: Allow building as module")
Signed-off-by: Mahesh Vaidya <mahesh.vaidya@altera.com>
[mani: added a note about IRQ disposal]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Subhransu S. Prusty <subhransu.sekhar.prusty@altera.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260430204330.3121003-2-mahesh.vaidya@altera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e8da46d99d upstream.
rt1711h_probe() registers the TCPCI port before requesting the interrupt
and enabling alert interrupts. If either of those later steps fails, the
probe function returns without unregistering the TCPCI port. The explicit
unregister currently only happens from the remove callback.
Register a devres action immediately after tcpci_register_port() succeeds,
so tcpci_unregister_port() runs on later probe failures and on driver
detach. Drop the remove callback to avoid unregistering the same port
twice.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: 302c570bf3 ("usb: typec: tcpci_rt1711h: avoid screaming irq causing boot hangs")
Cc: stable <stable@kernel.org>
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Link: https://patch.msgid.link/20260706145312.37260-1-mhun512@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 42c37c4b75 upstream.
When a USB device with active stream endpoints is disconnected,
xhci_free_streams() is called from the hub_event workqueue to
free the stream resources. It calls xhci_free_stream_info()
while holding xhci->lock with irqs disabled.
xhci_free_stream_info() invokes xhci_free_stream_ctx(), which
calls dma_free_coherent() for large stream context arrays.
dma_free_coherent() can sleep (e.g. via vunmap), triggering
a BUG when called from atomic context.
Call trace:
dma_free_attrs+0x174/0x220
xhci_free_stream_info+0xd0/0x11c
xhci_free_streams+0x278/0x37c
usb_free_streams+0x98/0xc0
usb_unbind_interface+0x1b8/0x2f8
device_release_driver_internal+0x1d4/0x2cc
device_release_driver+0x18/0x28
bus_remove_device+0x160/0x1a4
device_del+0x1ec/0x350
usb_disable_device+0x98/0x214
usb_disconnect+0xf0/0x35c
hub_event+0xab4/0x19ec
process_one_work+0x278/0x63c
Fix this by saving the stream_info pointers and clearing the
ep references under the lock, then calling xhci_free_stream_info()
outside the lock where sleeping is allowed.
Fixes: 8df75f42f8 ("USB: xhci: Add memory allocation for USB3 bulk streams.")
Cc: stable <stable@kernel.org>
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260703144033.483286-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f223d27a54 upstream.
In binder_free_transaction(), the t->to_proc is read under the t->lock.
However, once the t->lock is dropped, the to_proc can die in parallel.
This leads to a use-after-free error when we attempt to acquire its
inner lock right afterwards:
==================================================================
BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x1a0
Write of size 4 at addr ffff00001125da70 by task B/672
CPU: 20 UID: 0 PID: 672 Comm: B Not tainted 7.1.0-rc6-00284-g8e65320d91cd #4 PREEMPT
Hardware name: linux,dummy-virt (DT)
Call trace:
_raw_spin_lock+0xe4/0x1a0
binder_free_transaction+0x8c/0x320
binder_send_failed_reply+0x21c/0x2f8
binder_thread_release+0x488/0x7e0
binder_ioctl+0x12c0/0x29a0
[...]
Allocated by task 675:
__kmalloc_cache_noprof+0x174/0x444
binder_open+0x118/0xb70
do_dentry_open+0x374/0x1040
vfs_open+0x58/0x3bc
[...]
Freed by task 212:
__kasan_slab_free+0x58/0x80
kfree+0x1a0/0x4a4
binder_proc_dec_tmpref+0x32c/0x5e0
binder_deferred_func+0xc48/0x104c
process_one_work+0x53c/0xbc0
[...]
==================================================================
To prevent this, pin the target thread (t->to_thread) to guarantee the
target process remains alive. Undelivered transactions without a target
thread are already safe, as the target process can only be the current
context in those paths.
Cc: stable <stable@kernel.org>
Reported-by: Alice Ryhl <aliceryhl@google.com>
Closes: https://lore.kernel.org/all/aikJKVuny_eOivwN@google.com/
Fixes: a370003cc3 ("binder: fix possible UAF when freeing buffer")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260619185233.2194678-2-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 114a116aaa upstream.
When a thread exits, binder_thread_release() walks its transaction stack
to clear the t->from and t->to_proc that correspond with the exiting
thread. However, a process dying in parallel might attempt to kfree some
of these transactions. And if one of them has no associated t->to_proc,
the t->to_proc->inner_lock will not be acquired.
This means that transaction accesses in binder_thread_release() after
t->to_proc has been cleared might race with binder_free_transaction()
and cause a use-after-free error as reported by KASAN:
==================================================================
BUG: KASAN: slab-use-after-free in binder_thread_release+0x5d0/0x798
Write of size 8 at addr ffff000016627500 by task X/715
CPU: 17 UID: 0 PID: 715 Comm: X Not tainted 7.1.0-rc5-00149-g8fde5d1d47f6 #30 PREEMPT
Hardware name: linux,dummy-virt (DT)
Call trace:
binder_thread_release+0x5d0/0x798
binder_ioctl+0x12c0/0x299c
[...]
Allocated by task 717 on cpu 18 at 67.267803s:
__kasan_kmalloc+0xa0/0xbc
__kmalloc_cache_noprof+0x174/0x444
binder_transaction+0x554/0x8150
binder_thread_write+0xa30/0x4354
binder_ioctl+0x20f0/0x299c
[...]
Freed by task 202 on cpu 18 at 90.416221s:
__kasan_slab_free+0x58/0x80
kfree+0x1a0/0x4a4
binder_free_transaction+0x150/0x294
binder_send_failed_reply+0x398/0x6d8
binder_release_work+0x3e4/0x4ec
binder_deferred_func+0xbd8/0x104c
[...]
==================================================================
In order to avoid this, make sure that binder_free_transaction() reads
the t->to_proc under the transaction lock. This will serialize the
transaction release with the accesses in binder_thread_release(). Plus,
it matches the documented locking rules for @to_proc.
Cc: stable <stable@kernel.org>
Fixes: 7a4408c6bd ("binder: make sure accesses to proc/thread are safe")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20260619185233.2194678-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a26b499b75 upstream.
vfio_mig_get_next_state() walks vfio_from_fsm_table[] one step at a time,
looping to skip optional states the device does not support until
*next_fsm is supported. A blocked transition is encoded as
VFIO_DEVICE_STATE_ERROR, which the trailing return reports as -EINVAL.
The skip loop does not account for the ERROR sentinel.
state_flags_table[ERROR] is ~0U and vfio_from_fsm_table[ERROR][*] is
ERROR, so once *next_fsm becomes ERROR the loop condition stays true and
*next_fsm never changes. The blocked arcs STOP_COPY -> PRE_COPY and
STOP_COPY -> PRE_COPY_P2P map to ERROR yet pass the support check on a
precopy-capable device, causing the loop to spin forever while holding
the driver state mutex. This can result in a soft lockup, and a panic
with softlockup_panic set.
Terminate the skip loop on the ERROR sentinel so a blocked transition
falls through to the existing return and reports -EINVAL.
Fixes: 4db52602a6 ("vfio: Extend the device migration protocol with PRE_COPY")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/SYBPR01MB7881290BBDE79B61AE6A017FAF122@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e73638e55f upstream.
Bitfield operations are not atomic, they use a read-modify-write
pattern, therefore we should be careful not to pack bitfields that
can be concurrently updated into the same storage unit.
This split takes a binary approach: flags that are only modified
pre/post open/close remain bitfields, flags modified from user
action, including actions that reach across to another device (ex.
reset) use dedicated storage units.
Note that the virq_disabled and bardirty flags are relocated to fill
an existing hole in the structure.
Bitfield justifications:
has_dyn_msix: written only in vfio_pci_core_enable()
pci_2_3: written only in vfio_pci_core_enable()
reset_works: written only in vfio_pci_core_enable()
extended_caps: written only in vfio_cap_len() under vfio_config_init()
has_vga: written only in vfio_pci_core_enable()
nointx: written only in vfio_pci_core_enable()
needs_pm_restore: written only in vfio_pci_probe_power_state()
disable_idle_d3: written only at .init in vfio_pci_core_init_dev()
Dedicated storage units:
virq_disabled: written by guest INTx command writes in
vfio_basic_config_write() while the device is open
bardirty: written by guest BAR writes in vfio_basic_config_write()
while the device is open
pm_intx_masked: written in the runtime-PM suspend path.
pm_runtime_engaged: written by low-power feature entry/exit paths
needs_reset: set in vfio_pci_core_disable() and cleared for devices in
the set by vfio_pci_dev_set_try_reset()
sriov_active: written by vfio_pci_core_sriov_configure() via sysfs
sriov_numvfs while bound.
Fixes: 9cd0f6d5cb ("vfio/pci: Use bitfield for struct vfio_pci_core_device flags")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615191241.688297-4-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit daedde7f02 upstream.
The re-order in the Fixes commit below displaced vfio_pci_vga_init() as
the last failure point of what is now vfio_pci_core_register_device()
without introducing an unwind for the VGA arbiter registration.
In current kernels this is mostly benign because vfio_pci_set_decode()
only uses pci_dev state, but the original failure path could leave a
callback with a freed vdev cookie. The stale registration also becomes
unsafe again once the callback follows drvdata to the vfio device.
Add the required VGA unwind callout.
Fixes: 4aeec3984d ("vfio/pci: Re-order vfio_pci_probe()")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615191241.688297-3-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4575e9aac5 upstream.
When disable_idle_d3 was introduced in vfio-pci, it directly manipulated
the device power state with pci_set_power_state(). There were no
refcounts to maintain or balanced operations, we could unconditionally
bring the device to D0 and conditionally move it to D3hot. Therefore
the module parameter was made writable.
Later, in commit c61302aa48 ("vfio/pci: Move module parameters to
vfio_pci.c"), as part of the vfio-pci-core split, the writable aspect
of the module parameter was nullified. The parameter value could still
be changed through sysfs, but the vfio-pci driver latched the values
into vfio-pci-core globals at module init. Loading the vfio-pci module,
or unloading and reloading, with non-default or different values could
change the globals relative to existing devices bound to vfio-pci
variant drivers.
Runtime PM was introduced in commit 7ab5e10eda ("vfio/pci: Move the
unused device into low power state with runtime PM"), which marks the
point where power states became refcounted. PM get and put operations
need to be balanced, but the same module operations noted above can
change the global variables relative to those devices already bound to
vfio-pci variant drivers. This introduces a window where PM operations
can now become unbalanced.
To resolve this with a narrow footprint for stable backports, the
disable_idle_d3 flag is latched into the vfio_pci_core_device at the
time of initialization, such that the device always operates with a
consistent value.
NB. vfio_pci_dev_set_try_reset() now unconditionally raises the
runtime PM usage count around bus reset to account for disable_idle_d3
becoming a per-device rather than global flag. When this flag is set,
the additional get/put pair is harmless and allows continued use of the
shared vfio_pci_dev_set_pm_runtime_get() helper.
Fixes: 7ab5e10eda ("vfio/pci: Move the unused device into low power state with runtime PM")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615191241.688297-2-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6380957fa2 upstream.
Several mixer quirk callbacks cache the requested
control value in kcontrol->private_value before
issuing a single vendor or class write.
Their paired get and resume paths consume that cache
directly, so a failed write currently leaves software
state changed even though the update did not succeed.
That can make later reads report a value the device
never accepted and can replay the stale cache on resume.
Restore the previous cached value on failure in
the Audigy2NX LED, Emu0204 channel switch,
Xonar U1 output switch, Native Instruments controls,
FTU effect program switch, and Sound Blaster E1 input source switch.
Fixes: 9cf3689bfe ("ALSA: usb-audio: Add audigy2nx resume support")
Fixes: 5f503ee9e2 ("ALSA: usb-audio: Add Emu0204 channel switch resume support")
Fixes: 2bfb14c3b8 ("ALSA: usb-audio: Add Xonar U1 resume support")
Fixes: da6d276957 ("ALSA: usb-audio: Add resume support for Native Instruments controls")
Fixes: 0b4e9cfcef ("ALSA: usb-audio: Add resume support for FTU controls")
Fixes: 388fdb8f88 ("ALSA: usb-audio: Support changing input on Sound Blaster E1")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260429-alsa-usb-quirks-cache-rollback-v1-1-01b35c688b80@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7693c0cc41 upstream.
The DualSense jack-detection input handler verifies that a matching input
device belongs to the same physical controller by building kobject path
strings for both the input device and the USB audio device, then comparing
the path prefix.
This was observed when a weak physical connection caused the controller
to rapidly disconnect and reconnect. During that repeated hotplug,
snd_dualsense_ih_match() can run while the controller's USB device is
being disconnected. kobject_get_path() walks ancestor kobjects and
dereferences their names; if the USB device kobject name is no longer
valid, this can fault in strlen():
RIP: 0010:strlen+0x10/0x30
Call Trace:
kobject_get_path+0x34/0x150
snd_dualsense_ih_match+0x49/0xd0 [snd_usb_audio]
input_register_device+0x566/0x6a0
ps_probe+0xb89/0x1590 [hid_playstation]
The same ownership check can be done without building kobject path
strings. The input device is parented below the HID device, USB interface
and USB device, so walking the input device parent chain and comparing
against the mixer USB device preserves the check without dereferencing
kobject names during disconnect.
Fixes: 79d561c4ec ("ALSA: usb-audio: Add mixer quirk for Sony DualSense PS5")
Cc: <stable@vger.kernel.org>
Assisted-by: Cute:gpt-5.5
Signed-off-by: Darvell Long <contact@darvell.me>
Link: https://patch.msgid.link/20260624143723.2986353-1-contact@darvell.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 435990e25b upstream.
snd_seq_event_dup() copies an incoming event into a pool cell and, in
the UMP-enabled build, clears the trailing cell->ump.raw.extra word that
the memcpy() did not cover. The guard deciding whether to clear it
compares the copied size against sizeof(cell->event):
memcpy(&cell->ump, event, size);
if (size < sizeof(cell->event))
cell->ump.raw.extra = 0;
For a legacy (non-UMP) event, size == sizeof(struct snd_seq_event) ==
sizeof(cell->event), so the condition is false and the extra word keeps
stale data. The cell pool is allocated with kvmalloc() (not zeroed) and
cells are reused via a free list, so that word holds uninitialised heap
or leftover event data.
When such a cell is delivered to a UMP client (client->midi_version > 0)
that set SNDRV_SEQ_FILTER_NO_CONVERT -- so the legacy event reaches it
unconverted -- snd_seq_read() reads it out as the larger struct
snd_seq_ump_event and copies the stale word to user space, a 4-byte
kernel heap infoleak to an unprivileged /dev/snd/seq client.
Compare against sizeof(cell->ump) instead, so the trailing word is zeroed
for every event shorter than the UMP cell.
Fixes: 46397622a3 ("ALSA: seq: Add UMP support")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Link: https://patch.msgid.link/20260623233841.853326-1-sammiee5311@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b929b91b0 upstream.
snd_ctl_new1() can return NULL when memory allocation fails. The
ice1712 driver calls snd_ctl_new1() without checking the return value
before dereferencing the pointer in multiple places (ice1712.c,
ice1724.c, aureon.c), which can lead to NULL pointer dereferences.
Add NULL checks after snd_ctl_new1() calls and return -ENOMEM if any
fails.
Assisted-by: Opencode:DeepSeek-V4-Flash
Cc: stable@vger.kernel.org
Fixes: b9a4efd61b ("ALSA: ice1712,ice1724: fix the kcontrol->id initialization")
Signed-off-by: Zhao Dongdong <zhaodongdong@kylinos.cn>
Link: https://patch.msgid.link/tencent_42E5E2AB1B6A5101F7EE8C2117F1F687BB07@qq.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29b9667982 upstream.
isight_packet() takes the frame count from the device iso packet and
checks it only against the device claimed iso length.
count = be32_to_cpu(payload->sample_count);
if (likely(count <= (length - 16) / 4))
isight_samples(isight, payload->samples, count);
length is the iso header data_length. It can be up to 0xffff. So the
gate allows a count up to about 16379. isight_samples() then copies
count frames out of payload->samples into the PCM DMA buffer.
payload->samples holds only 2 * MAX_FRAMES_PER_PACKET values. The
device multiplexes two samples per frame. A count past
MAX_FRAMES_PER_PACKET reads past the payload. A count past the buffer
size writes past runtime->dma_area. The smallest PCM buffer is larger
than MAX_FRAMES_PER_PACKET. Bounding the count to MAX_FRAMES_PER_PACKET
keeps both the read and the write in range.
A malicious or faulty Apple iSight on the FireWire bus reaches this
during a normal capture.
Add the MAX_FRAMES_PER_PACKET bound to the gate.
Fixes: 3a691b28a0 ("ALSA: add Apple iSight microphone driver")
Suggested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Link: https://patch.msgid.link/178205454729.1900991.7807310178296762772@maoyixie.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f7f3f9fd81 upstream.
snd_usb_caiaq_tks4_dispatch() decodes the Traktor Kontrol S4 input
stream in fixed 16-byte (TKS4_MSGBLOCK_SIZE) message blocks. On every
iteration it advances buf and subtracts the block size while looping on
"while (len)".
len is urb->actual_length. That value is supplied by the device and is
not guaranteed to be a multiple of 16. When a final short block leaves
len between 1 and 15, the loop runs once more, reads up to buf[15], and
then does "len -= TKS4_MSGBLOCK_SIZE". As len is unsigned this underflows
to a huge value. The loop then keeps iterating and walking buf far past
the end of the 512-byte ep4_in_buf, reading out of bounds until a bogus
block id happens to be hit.
Iterate only while a full message block is available. This stops the
unsigned underflow and silently drops any trailing partial block, which
carries no complete control value anyway.
The sibling endpoint-4 parsers are not affected. The Traktor Kontrol X1
and Maschine arms in snd_usb_caiaq_ep4_reply_dispatch() floor
urb->actual_length before dispatching.
Fixes: 15c5ab6070 ("ALSA: snd-usb-caiaq: Add support for Traktor Kontrol S4")
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Link: https://patch.msgid.link/178176259547.3343534.2724779296835237429@maoyixie.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 83fbbcb793 upstream.
The VirtIO sound UAPI defines VIRTIO_SND_PCM_RATE_384000, and ALSA
has SNDRV_PCM_RATE_384000. However, virtio-snd's rate conversion
tables stop at 192 kHz.
A device advertising only 384 kHz is rejected as having no supported
PCM frame rates. A device advertising 384 kHz together with lower rates
does not expose 384 kHz through the ALSA hardware constraints. The
selected ALSA rate also needs a reverse mapping for SET_PARAMS.
Add the missing 384 kHz entries to both conversion tables.
Fixes: 29b96bf50b ("ALSA: virtio: build PCM devices and substream hardware descriptors")
Fixes: da76e9f3e4 ("ALSA: virtio: PCM substream operators")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260515-alsa-virtio-384k-rate-v1-1-35ecb5df835c@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5cb9fdb446 upstream.
reinit_completion() was called after regmap_write() initiated the hardware
conversion, creating a race window where the interrupt could fire and call
complete() before reinit_completion() reset the completion.
Move reinit_completion() before the regmap_write() to close the race.
ltc2983_eeprom_cmd() already does it in the correct order.
Fixes: f110f3188e ("iio: temperature: Add support for LTC2983")
Signed-off-by: Liviu Stan <liviu.stan@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c52bb33b64 upstream.
The events are registered for IIO_LIGHT and not for IIO_INTENSITY.
Use the correct channel type.
When at it, fix minor checkpatch code style warning (alignment).
Cc: stable@vger.kernel.org
Fixes: 7b779f573c ("iio: light: add driver for veml6030 ambient light sensor")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a00ffd1567 upstream.
When devm_request_threaded_irq() fails, probe logs the error and
then returns -EINVAL, dropping the real error code and breaking the
deferred-probe flow for -EPROBE_DEFER.
Return ret directly; the IRQ subsystem already prints on failure.
Fixes: 2335f0d7c7 ("iio: light: Added AMS tsl2591 driver implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 38b72267b7 upstream.
gp2ap002_read_raw() calls pm_runtime_get_sync() before reading the
lux value, but if gp2ap002_get_lux() fails, it returns directly. This
skips the pm_runtime_put_autosuspend() call at the "out" label,
permanently leaking a runtime PM reference and preventing the device
from autosuspending.
Replace the direct return with a "goto out" to ensure the reference
is properly dropped on the error path.
Fixes: f6dbf83c17 ("iio: light: gp2ap002: Take runtime PM reference on light read")
Signed-off-by: Biren Pandya <birenpandya@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa411adc6c upstream.
al3010_scales[] encodes the highest gain range as {0, 1187200}.
For IIO_VAL_INT_PLUS_MICRO, the fractional part must be less than
1000000, so the scale 1.1872 should instead be represented as
{ 1, 187200 }.
Since write_raw() compares the value from userspace against this
table, writing the advertised 1.1872 scale never matches the malformed
entry and returns -EINVAL. As a result, the highest gain range cannot
be selected. Reading the scale in that state also reports the malformed
value.
Fixes: c36b5195ab ("iio: light: add Dyna-Image AL3010 driver")
Signed-off-by: Vidhu Sarwal <vidhu.linux@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aede83625f upstream.
As part of driver initialization, e.g. st_lsm6dsx_init_shub() selects
the shub register page using st_lsm6dsx_set_page(). Selecting the shub
register page shadows the regular register space so whoami, among other
registers, is no longer accessible.
In applications where the IMU is permanently powered separately from the
processor, there is a window where a reset of the CPU leaves the IMU in
the shub register page. Once this occurs, any subsequent probe attempt
fails because of the register shadowing.
Using the ism330dlc, the error typically looks like
st_lsm6dsx_i2c 3-006a: unsupported whoami [10]
with the unknown whoami read from a reserved register in the shub page.
The reset register is also shadowed by the page select, preventing a
reset from recovering the chip.
Unconditionally clear the shub page before the whoami readout to ensure
normal register access and allow the initialization to proceed.
Place the fix in st_lsm6dsx_check_whoami() before the whoami check
because hw->settings, which st_lsm6dsx_set_page() relies on, is first
assigned in that function.
Placing the fix in a more logical place than the whoami check would
require a bigger restructuring of the code.
Fixes: c91c1c844e ("iio: imu: st_lsm6dsx: add i2c embedded controller support")
Signed-off-by: Andreas Kempe <andreas.kempe@actia.se>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hao-Qun Huang
Shoichiro Miyamoto
Michael Tautschnig
Samuel Page
Yizhou Zhao
Runyu Xiao
Alan Stern
Michael Bommarito
Johan Hovold
Xiang Mei
SeongJae Park
Ratheesh Kannoth
Mahesh Vaidya
Myeonghun Pak
胡连勤
Carlos Llamas
Zenm Chen
Junrui Luo
Alex Williamson
Raghavendra Rao Ananta
Cássio Gabriel
Darvell Long
HyeongJun An
Zhao Dongdong
Maoyi Xie
Liviu Stan
Andy Shevchenko
Javier Carrasco
Stepan Ionichev
Joshua Crofts
Biren Pandya
Vidhu Sarwal
Andreas Kempe