In mtk_pmic_keys_probe, the regs parameter is only set if the button is
parsed in the device tree. However, on hardware where the button is left
floating, that node will most likely be removed not to enable that
input. In that case the code will try to dereference a null pointer.
Let's use the regs struct instead as it is defined for all supported
platforms. Note that it is ok setting the key reg even if that latter is
disabled as the interrupt won't be enabled anyway.
Fixes: b581acb49a ("Input: mtk-pmic-keys - transfer per-key bit in mtk_pmic_keys_regs")
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
GCC 15's new -Wunterminated-string-initialization notices that the
16 character lookup table "nibbles" (which is not used as a C-String)
needs to be marked as "nonstring":
drivers/input/joystick/magellan.c: In function 'magellan_crunch_nibbles':
drivers/input/joystick/magellan.c:51:44: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (17 chars into 16 available) [-Wunterminated-string-initialization]
51 | static unsigned char nibbles[16] = "0AB3D56GH9:K<MN?";
| ^~~~~~~~~~~~~~~~~~
Add the annotation and While at it, mark the table as const too.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250416174513.work.662-kees@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The current implementation of the goodix_berlin driver lacks support for
revisions A and B of the Berlin IC. This change adds support for the
gt9897 IC, which is a Berlin-A revision part.
The differences between revision D and A are rather minor, a handful of
address changes and a slightly larger read buffer. They were taken from
the driver published by Goodix, which does a few more things that don't
appear to be necessary for the touchscreen to work properly.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Jens Reidel <adrian@mainlining.org>
Link: https://lore.kernel.org/r/20250309062315.35720-3-adrian@mainlining.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some register groups reserve a byte at the end of their continuous
address space. Depending on the variant of silicon, this field may
share the same memory space as the lower byte of the system status
register (0x10).
In these cases, caching the reserved byte and writing it later may
effectively reset the device depending on what happened in between
the read and write operations.
Solve this problem by avoiding any access to this last byte within
offending register groups. This method replaces a workaround which
attempted to write the reserved byte with up-to-date contents, but
left a small window in which updates by the device could have been
clobbered.
Now that the driver does not touch these reserved bytes, the order
in which the device's registers are written no longer matters, and
they can be written in their natural order. The new method is also
much more generic, and can be more easily extended to new variants
of silicon with different register maps.
As part of this change, the register read and write functions must
be gently updated to support byte access instead of word access.
Fixes: 2e70ef525b ("Input: iqs7222 - acknowledge reset before writing registers")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/Z85Alw+d9EHKXx2e@nixie71
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
We could not activly retest these devices because we no longer have them in
our archive, but based on the other old Clevo barebones we tested where the
new quirk had the same or a better behaviour I think it would be good to
apply it on these too.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-4-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When SMBUS is disabled, this is never referenced, causing a W=1 warning:
drivers/input/mouse/synaptics.c:164:27: error: 'smbus_pnp_ids' defined but not used [-Werror=unused-const-variable=]
Hide the array behind the same #ifdef as the code referencing it.
Fixes: e839ffab02 ("Input: synaptics - add support for Intertouch devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250225145451.1141995-1-arnd@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Matrix keypads with high capacity need a longer settle time after
enabling all columns before re-enabling interrupts. The delay gives
the system time to settle and avoids spurious interrupts.
Add a new optional device property to configure the delay after
enabling all columns. The default is no delay.
Signed-off-by: Markus Burri <markus.burri@mt.com>
Reviewed-by: Manuel Traut <manuel.traut@mt.com>
Link: https://lore.kernel.org/r/20250110054906.354296-7-markus.burri@mt.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull i2c fix from Wolfram Sang:
"Revert one cleanup which turned out to eat too much stack space"
* tag 'i2c-for-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core: Allocate temporary client dynamically
Pull EDAC fix from Borislav Petkov:
- Have qcom_edac use the correct interrupt enable register to configure
the RAS interrupt lines
* tag 'edac_urgent_for_v6.14_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/qcom: Correct interrupt enable register configuration
Pull smb client fix from Steve French:
- Fix potential null pointer dereference
* tag 'v6.14-rc3-smb3-client-fix-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: Add check for next_buffer in receive_encrypted_standard()
Pull x86 fixes from Ingo Molnar:
- Fix AVX-VNNI CPU feature dependency bug triggered via the 'noxsave'
boot option
- Fix typos in the SVA documentation
- Add Tony Luck as RDT co-maintainer and remove Fenghua Yu
* tag 'x86-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
docs: arch/x86/sva: Fix two grammar errors under Background and FAQ
x86/cpufeatures: Make AVX-VNNI depend on AVX
MAINTAINERS: Change maintainer for RDT
Pull rseq fixes from Ingo Molnar:
- Fix overly spread-out RSEQ concurrency ID allocation pattern that
regressed certain workloads
- Fix RSEQ registration syscall behavior on -EFAULT errors when
CONFIG_DEBUG_RSEQ=y (This debug option is disabled on most
distributions)
* tag 'sched-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Fix rseq registration with CONFIG_DEBUG_RSEQ
sched: Compact RSEQ concurrency IDs with reduced threads and affinity
Pull perf event fixes from Ingo Molnar:
"Fix x86 Intel Lion Cove CPU event constraints, and fix uprobes
debug/error printk output pointer-value verbosity"
* tag 'perf-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix event constraints for LNC
uprobes: Don't use %pK through printk
Pull s390 fixes from Vasily Gorbik:
- Fix inline asm constraint in cmma_test_essa() to avoid potential ESSA
detection miscompilation
- Fix build failure with CONFIG_GENDWARFKSYMS by disabling purgatory
symbol exports with -D__DISABLE_EXPORTS
- Update defconfigs
* tag 's390-6.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/boot: Fix ESSA detection
s390/purgatory: Use -D__DISABLE_EXPORTS
s390: Update defconfigs
Pull tracing fixes from Steven Rostedt:
"Function graph accounting fixes:
- Fix the manage ops hashes
The function graph registers a "manager ops" and "sub-ops" to
ftrace. The manager ops does not have any callback but calls the
sub-ops callbacks. The manage ops hashes (what is used to tell
ftrace what functions to attach to) is built on the sub-ops it
manages.
There was an error in the way it built the hash. An empty hash
means to attach to all functions. When the manager ops had one
sub-ops it properly copied its hash. But when the manager ops had
more than one sub-ops, it went into a loop to make a set of all
functions it needed to add to the hash. If any of the subops hashes
was empty, that would mean to attach to all functions. The error
was that the first iteration of the loop passed in an empty hash to
start with in order to add the other hashes. That starting hash was
mistaken as to attach to all functions. This made the manage ops
attach to all functions whenever it had two or more sub-ops, even
if each sub-op was attached to only a single function.
- Do not add duplicate entries to the manager ops hash
If two or more subops hashes trace the same function, an entry for
that function will be added to the manager ops for each subops.
This causes waste and extra overhead.
Fprobe accounting fixes:
- Remove last function from fprobe hash
Fprobes has a ftrace hash to manage which functions an fprobe is
attached to. It also has a counter of how many fprobes are
attached. When the last fprobe is removed, it unregisters the
fprobe from ftrace but does not remove the functions the last
fprobe was attached to from the hash. This leaves the old functions
attached. When a new fprobe is added, the fprobe infrastructure
attaches to not only the functions of the new fprobe, but also to
the functions of the last fprobe.
- Fix accounting of the fprobe counter
When a fprobe is added, it updates a counter. If the counter goes
from zero to one, it attaches its ops to ftrace. When an fprobe is
removed, the counter is decremented. If the counter goes from 1 to
zero, it removes the fprobes ops from ftrace.
There was an issue where if two fprobes trace the same function,
the addition of each fprobe would increment the counter. But when
removing the first of the fprobes, it would notice that another
fprobe is still attached to one of its functions no it does not
remove the functions from the ftrace ops.
But it also did not decrement the counter, so when the last fprobe
is removed, the counter is still one. This leaves the fprobes
callback still registered with ftrace and it being called by the
functions defined by the fprobes ops hash. Worse yet, because all
the functions from the fprobe ops hash have been removed, that
tells ftrace that it wants to trace all functions.
Thus, this puts the state of the system where every function is
calling the fprobe callback handler (which does nothing as there
are no registered fprobes), but this causes a good 13% slow down of
the entire system.
Other updates:
- Add a selftest to test the above issues to prevent regressions.
- Fix preempt count accounting in function tracing
Better recursion protection was added to function tracing which
added another layer of preempt disable. As the preempt_count gets
traced in the event, it needs to subtract the amount of preempt
disabling the tracer does to record what the preempt_count was when
the trace was triggered.
- Fix memory leak in output of set_event
A variable is passed by the seq_file functions in the location that
is set by the return of the next() function. The start() function
allocates it and the stop() function frees it. But when the last
item is found, the next() returns NULL which leaks the data that
was allocated in start(). The m->private is used for something
else, so have next() free the data when it returns NULL, as stop()
will then just receive NULL in that case"
* tag 'ftrace-v6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix memory leak when reading set_event file
ftrace: Correct preemption accounting for function tracing.
selftests/ftrace: Update fprobe test to check enabled_functions file
fprobe: Fix accounting of when to unregister from function graph
fprobe: Always unregister fgraph function from ops
ftrace: Do not add duplicate entries in subops manager ops
ftrace: Fix accounting of adding subops to a manager ops
drivers/i2c/i2c-core-base.c: In function ‘i2c_detect.isra’:
drivers/i2c/i2c-core-base.c:2544:1: warning: the frame size of 1312 bytes is larger than 1024 bytes [-Wframe-larger-than=]
2544 | }
| ^
Fix this by allocating the temporary client structure dynamically, as it
is a rather large structure (1216 bytes, depending on kernel config).
This is basically a revert of the to-be-fixed commit with some
checkpatch improvements.
Fixes: 735668f8e5 ("i2c: core: Allocate temp client on the stack in i2c_detect")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
[wsa: updated commit message, merged tags from similar patch]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Pull SoC fixes from Arnd Bergmann:
"Two people stepped up as platform co-maintainers: Andrew Jeffery for
ASpeed and Janne Grunau for Apple.
The rockchip platform gets 9 small fixes for devicetree files,
addressing both compile-time warnings and board specific bugs.
One bugfix for the optee firmware driver addresses a reboot-time hang.
Two drivers need improved Kconfig dependencies to allow wider compile-
testing while hiding the drivers on platforms that can't use them.
ARM SCMI and loongson-guts drivers get minor bugfixes"
* tag 'soc-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: loongson: loongson2_guts: Add check for devm_kstrdup()
tee: optee: Fix supplicant wait loop
platform: cznic: CZNIC_PLATFORMS should depend on ARCH_MVEBU
firmware: imx: IMX_SCMI_MISC_DRV should depend on ARCH_MXC
MAINTAINERS: arm: apple: Add Janne as maintainer
MAINTAINERS: Mark Andrew as M: for ASPEED MACHINE SUPPORT
firmware: arm_scmi: imx: Correct tx size of scmi_imx_misc_ctrl_set
arm64: dts: rockchip: adjust SMMU interrupt type on rk3588
arm64: dts: rockchip: disable IOMMU when running rk3588 in PCIe endpoint mode
dt-bindings: rockchip: pmu: Ensure all properties are defined
arm64: defconfig: Enable TISCI Interrupt Router and Aggregator
arm64: dts: rockchip: Fix lcdpwr_en pin for Cool Pi GenBook
arm64: dts: rockchip: fix fixed-regulator renames on rk3399-gru devices
arm64: dts: rockchip: Disable DMA for uart5 on px30-ringneck
arm64: dts: rockchip: Move uart5 pin configuration to px30 ringneck SoM
arm64: dts: rockchip: change eth phy mode to rgmii-id for orangepi r1 plus lts
arm64: dts: rockchip: Fix broken tsadc pinctrl names for rk3588
Pull drm fixes from Dave Airlie:
"Weekly drm fixes pull request, lots of small things all over, msm has
a bunch of things but all very small, xe, i915, a fix for the cgroup
dmem controller.
core:
- remove MAINTAINERS entry
cgroup/dmem:
- use correct function for pool descendants
panel:
- fix signal polarity issue jd9365da-h3
nouveau:
- folio handling fix
- config fix
amdxdna:
- fix missing header
xe:
- Fix error handling in xe_irq_install
- Fix devcoredump format
i915:
- Use spin_lock_irqsave() in interruptible context on guc submission
- Fixes on DDI and TRANS programming
- Make sure all planes in use by the joiner have their crtc included
- Fix 128b/132b modeset issues
msm:
- More catalog fixes:
- to skip watchdog programming through top block if its not
present
- fix the setting of WB mask to ensure the WB input control is
programmed correctly through ping-pong
- drop lm_pair for sm6150 as that chipset does not have any
3dmerge block
- Fix the mode validation logic for DP/eDP to account for widebus
(2ppc) to allow high clock resolutions
- Fix to disable dither during encoder disable as otherwise this
was causing kms_writeback failure due to resource sharing
between WB and DSI paths as DSI uses dither but WB does not
- Fixes for virtual planes, namely to drop extraneous return and
fix uninitialized variables
- Fix to avoid spill-over of DSC encoder block bits when
programming the bits-per-component
- Fixes in the DSI PHY to protect against concurrent access of
PHY_CMN_CLK_CFG regs between clock and display drivers
- Core/GPU:
- Fix non-blocking fence wait incorrectly rounding up to 1 jiffy
timeout
- Only print GMU fw version once, instead of each time the GPU
resumes"
* tag 'drm-fixes-2025-02-22' of https://gitlab.freedesktop.org/drm/kernel: (28 commits)
drm/i915/dp: Fix disabling the transcoder function in 128b/132b mode
drm/i915/dp: Fix error handling during 128b/132b link training
accel/amdxdna: Add missing include linux/slab.h
MAINTAINERS: Remove myself
drm/nouveau/pmu: Fix gp10b firmware guard
cgroup/dmem: Don't open-code css_for_each_descendant_pre
drm/xe/guc: Fix size_t print format
drm/xe: Make GUC binaries dump consistent with other binaries in devcoredump
drm/i915: Make sure all planes in use by the joiner have their crtc included
drm/i915/ddi: Fix HDMI port width programming in DDI_BUF_CTL
drm/i915/dsi: Use TRANS_DDI_FUNC_CTL's own port width macro
drm/xe: Fix error handling in xe_irq_install()
drm/i915/gt: Use spin_lock_irqsave() in interruptible context
drm/msm/dsi/phy: Do not overwite PHY_CMN_CLK_CFG1 when choosing bitclk source
drm/msm/dsi/phy: Protect PHY_CMN_CLK_CFG1 against clock driver
drm/msm/dsi/phy: Protect PHY_CMN_CLK_CFG0 updated from driver side
drm/msm/dpu: Drop extraneous return in dpu_crtc_reassign_planes()
drm/msm/dpu: Don't leak bits_per_component into random DSC_ENC fields
drm/msm/dpu: Disable dither in phys encoder cleanup
drm/msm/dpu: Fix uninitialized variable
...
Dmitry Torokhov
Gary Bisson
Lode Willems
Mikael Gonella-Bolduc
Mattijs Korpershoek
Arnd Bergmann
Hugo Villeneuve
WangYuli
Kees Cook
Bastien Nocera
Jens Reidel
Jeff LaBundy
Markus Burri
Werner Sembach
Dmitry Antipov
Sasha Finkelstein
Krzysztof Kozlowski
Antheas Kapenekakis
Luca Weiss
Andras Sebok
Linus Torvalds
Geert Uytterhoeven