[ Upstream commit 7178c3586a ]
maxburst, as provided by the client, specifies the largest amount of
data that is allowed to be transferred in one burst. This limit is
normally provided to avoid a data burst overflowing the target FIFO.
It does not mean that the DMA engine can only do bursts in that size.
Let the driver pick the largest supported burst length within the
given limit. This lets the driver work correctly with some clients that
give a large maxburst value. In particular, the 8250_dw driver will give
a quarter of the UART's FIFO size as maxburst. On some systems the FIFO
size is 256 bytes, giving a maxburst of 64 bytes, while the hardware
only supports bursts of up to 16 bytes.
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251221080450.1813479-1-wens@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6811e0a08b ]
ucsi_psy_get_voltage_max and ucsi_psy_get_current_max are calculated
using whichever pdo is in the last position of the src_pdos array, presuming
it to be a fixed pdo, so the pdo_fixed_voltage or pdo_max_current
helpers are used on that last pdo.
However, non-Fixed PDOs such as Battery PDOs, Augmented PDOs (used for AVS and
for PPS) may exist, and are always at the end of the array if they do.
In the event one of these more advanced chargers are attached the helpers for
fixed return mangled values.
Here's an example case of a Google Pixel Flex Dual Port 67W USB-C Fast Charger
with PPS support:
POWER_SUPPLY_NAME=ucsi-source-psy-cros_ec_ucsi.4.auto2
POWER_SUPPLY_TYPE=USB
POWER_SUPPLY_CHARGE_TYPE=Standard
POWER_SUPPLY_USB_TYPE=C [PD] PD_PPS PD_DRP
POWER_SUPPLY_ONLINE=1
POWER_SUPPLY_VOLTAGE_MIN=5000000
POWER_SUPPLY_VOLTAGE_MAX=13400000
POWER_SUPPLY_VOLTAGE_NOW=20000000
POWER_SUPPLY_CURRENT_MAX=5790000
POWER_SUPPLY_CURRENT_NOW=3250000
Voltage Max is reading as 13.4V, but that's an incorrect decode of the PPS
APDO in the last position. Same goes for CURRENT_MAX. 5.79A is incorrect.
Instead, enumerate through the src_pdos and filter just for Fixed PDOs for
now, and find the one with the highest voltage and current respectively.
After, from the same charger:
POWER_SUPPLY_NAME=ucsi-source-psy-cros_ec_ucsi.4.auto2
POWER_SUPPLY_TYPE=USB
POWER_SUPPLY_CHARGE_TYPE=Standard
POWER_SUPPLY_USB_TYPE=C [PD] PD_PPS PD_DRP
POWER_SUPPLY_ONLINE=1
POWER_SUPPLY_VOLTAGE_MIN=5000000
POWER_SUPPLY_VOLTAGE_MAX=20000000
POWER_SUPPLY_VOLTAGE_NOW=20000000
POWER_SUPPLY_CURRENT_MAX=4000000
POWER_SUPPLY_CURRENT_NOW=3250000
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251208174918.289394-3-bleung@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d31228143a ]
Add error checking for clk_prepare_enable() calls in
dw8250_runtime_resume(). Currently if either clock fails to enable,
the function returns success while leaving clocks in inconsistent state.
This change implements comprehensive error handling by checking the return
values of both clk_prepare_enable() calls. If the second clock enable
operation fails after the first clock has already been successfully
enabled, the code now properly cleans up by disabling and unpreparing
the first clock before returning. The error code is then propagated to
the caller, ensuring that clock enable failures are properly reported
rather than being silently ignored.
Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com>
Link: https://patch.msgid.link/20251104145433.2316165-2-a.shimko.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 618b4aec12 ]
The return value of sdio_alloc_irq() was not stored in status.
If sdio_alloc_irq() fails after rtw_drv_register_netdev() succeeds,
status remains _SUCCESS and the error path skips resource cleanup,
while rtw_drv_init() still returns success.
Store the return value of sdio_alloc_irq() in status and reuse the
existing error handling which relies on status.
Reviewed-by: fanggeng <fanggeng@lixiang.com>
Signed-off-by: Liang Jie <liangjie@lixiang.com>
Link: https://patch.msgid.link/20251208092730.262499-1-buaajxlj@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 590fe2f46c ]
68000 has different alignment needs to 68020+.
memcpy() checks if the destination is aligned and does a smaller copy
to fix the alignment and then critically for 68000 it checks if the
source is still unaligned and if it is reverts to smaller copies.
memmove() does not currently do the second part and malfunctions if
one of the pointers is aligned and the other isn't.
This is apparently getting triggered by printk. If I put breakpoints
into the new checks added by this commit the first hit looks like this:
memmove (n=205, src=0x2f3971 <printk_shared_pbufs+205>, dest=0x2f3980 <printk_shared_pbufs+220>) at arch/m68k/lib/memmove.c:82
Signed-off-by: Daniel Palmer <daniel@thingy.jp>
Signed-off-by: Greg Ungerer <gerg@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c77661d60d ]
If there are any pending messages in the mailbox queue, they are sent
as soon as a TX done event arrives from the driver. This may trigger a
new delivery interrupt while the previous one is still being handled.
If the delivery status is cleared after this, the interrupt is lost.
To prevent this from happening, clear the delivery status immediately
after checking it and before any new messages are sent.
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d935187cfb ]
A potential circular locking dependency (ABBA deadlock) exists between
`ec_dev->lock` and the clock framework's `prepare_lock`.
The first order (A -> B) occurs when scp_ipi_send() is called while
`ec_dev->lock` is held (e.g., within cros_ec_cmd_xfer()):
1. cros_ec_cmd_xfer() acquires `ec_dev->lock` and calls scp_ipi_send().
2. scp_ipi_send() calls clk_prepare_enable(), which acquires
`prepare_lock`.
See #0 in the following example calling trace.
(Lock Order: `ec_dev->lock` -> `prepare_lock`)
The reverse order (B -> A) is more complex and has been observed
(learned) by lockdep. It involves the clock prepare operation
triggering power domain changes, which then propagates through sysfs
and power supply uevents, eventually calling back into the ChromeOS EC
driver and attempting to acquire `ec_dev->lock`:
1. Something calls clk_prepare(), which acquires `prepare_lock`. It
then triggers genpd operations like genpd_runtime_resume(), which
takes `&genpd->mlock`.
2. Power domain changes can trigger regulator changes; regulator
changes can then trigger device link changes; device link changes
can then trigger sysfs changes. Eventually, power_supply_uevent()
is called.
3. This leads to calls like cros_usbpd_charger_get_prop(), which calls
cros_ec_cmd_xfer_status(), which then attempts to acquire
`ec_dev->lock`.
See #1 ~ #6 in the following example calling trace.
(Lock Order: `prepare_lock` -> `&genpd->mlock` -> ... -> `&ec_dev->lock`)
Move the clk_prepare()/clk_unprepare() operations for `scp->clk` to the
remoteproc prepare()/unprepare() callbacks. This ensures `prepare_lock`
is only acquired in prepare()/unprepare() callbacks. Since
`ec_dev->lock` is not involved in the callbacks, the dependency loop is
broken.
This means the clock is always "prepared" when the SCP is running. The
prolonged "prepared time" for the clock should be acceptable as SCP is
designed to be a very power efficient processor. The power consumption
impact can be negligible.
A simplified calling trace reported by lockdep:
> -> #6 (&ec_dev->lock)
> cros_ec_cmd_xfer
> cros_ec_cmd_xfer_status
> cros_usbpd_charger_get_port_status
> cros_usbpd_charger_get_prop
> power_supply_get_property
> power_supply_show_property
> power_supply_uevent
> dev_uevent
> uevent_show
> dev_attr_show
> sysfs_kf_seq_show
> kernfs_seq_show
> -> #5 (kn->active#2)
> kernfs_drain
> __kernfs_remove
> kernfs_remove_by_name_ns
> sysfs_remove_file_ns
> device_del
> __device_link_del
> device_links_driver_bound
> -> #4 (device_links_lock)
> device_link_remove
> _regulator_put
> regulator_put
> -> #3 (regulator_list_mutex)
> regulator_lock_dependent
> regulator_disable
> scpsys_power_off
> _genpd_power_off
> genpd_power_off
> -> #2 (&genpd->mlock/1)
> genpd_add_subdomain
> pm_genpd_add_subdomain
> scpsys_add_subdomain
> scpsys_probe
> -> #1 (&genpd->mlock)
> genpd_runtime_resume
> __rpm_callback
> rpm_callback
> rpm_resume
> __pm_runtime_resume
> clk_core_prepare
> clk_prepare
> -> #0 (prepare_lock)
> clk_prepare
> scp_ipi_send
> scp_send_ipi
> mtk_rpmsg_send
> rpmsg_send
> cros_ec_pkt_xfer_rpmsg
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20260112110755.2435899-1-tzungbi@kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 673b570825 ]
In current imx-mailbox driver, the MU IRQ is configured with
'IRQF_NO_SUSPEND' flag set. So during linux suspend/resume flow,
the MU IRQ is always enabled. With commit 892cb524ae ("mailbox: imx:
fix wakeup failure from freeze mode"), if the MU IRQ is triggered after
the priv->suspended flag has been set, the system suspend will be
aborted.
On i.MX7ULP platform, certain drivers that depend on rpmsg may need
to send rpmsg request and receive an acknowledgment from the remote
core during the late_suspend stage. Early suspend abort is not
expected, and the i.MX7ULP already has additional hardware and
software to make sure the system can be wakeup from freeze mode
correctly when MU IRQ is trigger.
Skip the 'suspend' flag handling logic on i.MX7ULP to avoid the
early abort when doing suspend.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 673327028c ]
The PCC code currently specifies IRQF_ONESHOT if the interrupt could
potentially be shared but doesn't actually use request_threaded_irq() and
the interrupt handler does not use IRQ_WAKE_THREAD so IRQF_ONESHOT is
never relevant. Since commit aef30c8d56 ("genirq: Warn about using
IRQF_ONESHOT without a threaded handler") specifying it has resulted in a
WARN_ON(), fix this by removing IRQF_ONESHOT.
Reported-by: Aishwarya TCV <Aishwarya.TCV@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d62e0e92e5 ]
Firmwares that do not use mailbox communication (e.g., the hello_world
sample) leave priv->tx_ch as NULL. The current suspend logic
unconditionally sends RP_MBOX_SUSPEND_SYSTEM, which is invalid without
an initialized TX channel.
Detect the no_mailboxes case early and skip sending the suspend
message. Instead, proceed directly to the runtime PM suspend path,
which is the correct behavior for firmwares that cannot respond to
mailbox requests.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/20251204122825.756106-1-iuliana.prodan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f743435f98 ]
The get_sample() function in the hwlat tracer assumes the caller holds
hwlat_data.lock, but this is not actually happening. The result is
unprotected data access to hwlat_data, and in per-cpu mode can result in
false sharing which may show up as false positive latency events.
The specific case of false sharing observed was primarily between
hwlat_data.sample_width and hwlat_data.count. These are separated by
just 8B and are therefore likely to share a cache line. When one thread
modifies count, the cache line is in a modified state so when other
threads read sample_width in the main latency detection loop, they fetch
the modified cache line. On some systems, the fetch itself may be slow
enough to count as a latency event, which could set up a self
reinforcing cycle of latency events as each event increments count which
then causes more latency events, continuing the cycle.
The other result of the unprotected data access is that hwlat_data.count
can end up with duplicate or missed values, which was observed on some
systems in testing.
Convert hwlat_data.count to atomic64_t so it can be safely modified
without locking, and prevent false sharing by pulling sample_width into
a local variable.
One system this was tested on was a dual socket server with 32 CPUs on
each numa node. With settings of 1us threshold, 1000us width, and
2000us window, this change reduced the number of latency events from
500 per second down to approximately 1 event per minute. Some machines
tested did not exhibit measurable latency from the false sharing.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260210074810.6328-1-clord@mykolab.com
Signed-off-by: Colin Lord <clord@mykolab.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5145b27730 ]
Explicitly set non-cached caching attributes for MMIO regions.
Default write-back mode can cause CPU to cache device memory,
causing invalid reads and unpredictable behavior.
Invalid read and write issues were observed on ARM64 when mapping the
notification area to userspace via mmap.
Signed-off-by: Kommula Shiva Shankar <kshankar@marvell.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20260102065703.656255-1-kshankar@marvell.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e17f0d4cc0 ]
Some randconfig builds run into excessive stack usage with gcc-14 or
higher, which use __attribute__((cold)) where earlier versions did not do
that:
drivers/scsi/BusLogic.c: In function 'blogic_init':
drivers/scsi/BusLogic.c:2398:1: error: the frame size of 1680 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
The problem is that a lot of code gets inlined into blogic_init() here. Two
functions stick out, but they are a bit different:
- blogic_init_probeinfo_list() actually uses a few hundred bytes of kernel
stack, which is a problem in combination with other functions that also
do. Marking this one as noinline means that the stack slots get get
reused between function calls
- blogic_reportconfig() has a few large variables, but whenever it is not
inlined into its caller, the compiler is actually smart enough to reuse
stack slots for these automatically, so marking it as noinline saves
most of the stack space by itself.
The combination of both of these should avoid the problem entirely.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260203163321.2598593-1-arnd@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8be14dd48d ]
After a RAS error occurs on the accelerator device, the accelerator
device will be reset. The live migration state will be abnormal
after reset, and the original state needs to be restored during
the reset process.
Therefore, reset processing needs to be performed in a live
migration scenario.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20260122020205.2884497-3-liulongfang@huawei.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 151cabd140 ]
When a SATA DAS enclosure is connected behind a Thunderbolt PCIe
switch, hot-unplugging the whole enclosure causes pciehp to tear down
the PCI hierarchy before the SCSI layer issues SYNCHRONIZE CACHE and
START STOP UNIT for the disks.
libata still queues these commands and the AHCI driver tries to access
the HBA registers even though the PCI channel is already offline. This
results in a series of timeouts and error recovery attempts, e.g.:
[ 824.778346] pcieport 0000:00:07.0: pciehp: Slot(14): Link Down
[ 891.612720] ata8.00: qc timeout after 5000 msecs (cmd 0xec)
[ 902.876501] ata8.00: qc timeout after 10000 msecs (cmd 0xec)
[ 934.107998] ata8.00: qc timeout after 30000 msecs (cmd 0xec)
[ 936.206431] sd 7:0:0:0: [sda] Synchronize Cache(10) failed:
Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
...
[ 1006.298356] ata1.00: qc timeout after 5000 msecs (cmd 0xec)
[ 1017.561926] ata1.00: qc timeout after 10000 msecs (cmd 0xec)
[ 1048.791790] ata1.00: qc timeout after 30000 msecs (cmd 0xec)
[ 1050.890035] sd 0:0:0:0: [sdb] Synchronize Cache(10) failed:
Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
With this patch applied, the same hot-unplug looks like:
[ 59.965496] pcieport 0000:00:07.0: pciehp: Slot(14): Link Down
[ 60.002502] sd 7:0:0:0: [sda] Synchronize Cache(10) failed:
Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
...
[ 60.103050] sd 0:0:0:0: [sdb] Synchronize Cache(10) failed:
Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
In this test setup with two disks, the hot-unplug sequence shrinks from
about 226 seconds (~3.8 minutes) between the Link Down event and the
last SYNCHRONIZE CACHE failure to under a second. Without this patch the
total delay grows roughly with the number of disks, because each disk
gets its own SYNCHRONIZE CACHE and qc timeout series.
If the underlying PCI device is already gone, these commands cannot
succeed anyway. Avoid issuing them by introducing
ata_adapter_is_online(), which checks pci_channel_offline() for
PCI-based hosts. It is used from ata_scsi_find_dev() to return NULL,
causing the SCSI layer to fail new commands with DID_BAD_TARGET
immediately, and from ata_qc_issue() to bail out before touching the
HBA registers.
Since such failures would otherwise trigger libata error handling,
ata_adapter_is_online() is also consulted from ata_scsi_port_error_handler().
When the adapter is offline, libata skips ap->ops->error_handler(ap) and
completes error handling using the existing path, rather than running
a full EH sequence against a dead adapter.
With this change, SYNCHRONIZE CACHE and START STOP UNIT commands
issued during hot-unplug fail quickly once the PCI channel is offline,
without qc timeout spam or long libata EH delays.
Suggested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Henry Tseng <henrytseng@qnap.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd24173439 ]
While compile testing on less common architectures, I noticed that gcc-10 on
s390 finds a bug that all other configurations seem to miss:
drivers/net/ethernet/myricom/myri10ge/myri10ge.c: In function 'myri10ge_set_multicast_list':
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:391:25: error: 'cmd.data0' is used uninitialized in this function [-Werror=uninitialized]
391 | buf->data0 = htonl(data->data0);
| ^~
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:392:25: error: '*((void *)&cmd+4)' is used uninitialized in this function [-Werror=uninitialized]
392 | buf->data1 = htonl(data->data1);
| ^~
drivers/net/ethernet/myricom/myri10ge/myri10ge.c: In function 'myri10ge_allocate_rings':
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:392:13: error: 'cmd.data1' is used uninitialized in this function [-Werror=uninitialized]
392 | buf->data1 = htonl(data->data1);
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:1939:22: note: 'cmd.data1' was declared here
1939 | struct myri10ge_cmd cmd;
| ^~~
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:393:13: error: 'cmd.data2' is used uninitialized in this function [-Werror=uninitialized]
393 | buf->data2 = htonl(data->data2);
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:1939:22: note: 'cmd.data2' was declared here
1939 | struct myri10ge_cmd cmd;
It would be nice to understand how to make other compilers catch this as
well, but for the moment I'll just shut up the warning by fixing the
undefined behavior in this driver.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260205162935.2126442-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c81a2ce6b6 ]
After asserting Secondary Bus Reset to downstream devices via a GB10 Root
Port, the link may not retrain correctly, e.g., the link may retrain with a
lower lane count or config accesses to downstream devices may fail.
Prevent use of Secondary Bus Reset for devices below GB10.
Signed-off-by: Johnny-CC Chang <Johnny-CC.Chang@mediatek.com>
[bhelgaas: drop pci_ids.h update (only used once), update commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251113084441.2124737-1-Johnny-CC.Chang@mediatek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c41e2fb67e ]
Platform, ACPI, or IOMMU drivers call pci_request_acs(), which sets
'pci_acs_enable' to request that ACS be enabled for any devices enumerated
in the future.
OF platforms called pci_enable_acs() for the first device before
of_iommu_configure() called pci_request_acs(), so ACS was never enabled for
that device (typically a Root Port).
Call pci_enable_acs() later, from pci_dma_configure(), after
of_dma_configure() has had a chance to call pci_request_acs().
Here's the call path, showing the move of pci_enable_acs() from
pci_acs_init() to pci_dma_configure(), where it always happens after
pci_request_acs():
pci_device_add
pci_init_capabilities
pci_acs_init
- pci_enable_acs
- if (pci_acs_enable) <-- previous test
- ...
device_add
bus_notify(BUS_NOTIFY_ADD_DEVICE)
iommu_bus_notifier
iommu_probe_device
iommu_init_device
dev->bus->dma_configure
pci_dma_configure # pci_bus_type.dma_configure
of_dma_configure
of_iommu_configure
pci_request_acs
pci_acs_enable = 1 <-- set
+ pci_enable_acs
+ if (pci_acs_enable) <-- new test
+ ...
bus_probe_device
device_initial_probe
...
really_probe
dev->bus->dma_configure
pci_dma_configure # pci_bus_type.dma_configure
...
pci_enable_acs
Note that we will now call pci_enable_acs() twice for every device, first
from the iommu_probe_device() path and again from the really_probe() path.
Presumably that's not an issue since we also call dev->bus->dma_configure()
twice.
For the ACPI platforms, pci_request_acs() is called during ACPI
initialization time itself, independent of the IOMMU framework.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://patch.msgid.link/20260102-pci_acs-v3-1-72280b94d288@oss.qualcomm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e25dbf561e ]
The gcc-16.0.1 snapshot produces a false-positive warning that turns
into a build failure with CONFIG_WERROR:
In file included from arch/x86/include/asm/string.h:6,
from net/vmw_vsock/vmci_transport.c:10:
In function 'vmci_transport_packet_init',
inlined from '__vmci_transport_send_control_pkt.constprop' at net/vmw_vsock/vmci_transport.c:198:2:
arch/x86/include/asm/string_32.h:150:25: error: argument 2 null where non-null expected because argument 3 is nonzero [-Werror=nonnull]
150 | #define memcpy(t, f, n) __builtin_memcpy(t, f, n)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
net/vmw_vsock/vmci_transport.c:164:17: note: in expansion of macro 'memcpy'
164 | memcpy(&pkt->u.wait, wait, sizeof(pkt->u.wait));
| ^~~~~~
arch/x86/include/asm/string_32.h:150:25: note: in a call to built-in function '__builtin_memcpy'
net/vmw_vsock/vmci_transport.c:164:17: note: in expansion of macro 'memcpy'
164 | memcpy(&pkt->u.wait, wait, sizeof(pkt->u.wait));
| ^~~~~~
This seems relatively harmless, and it so far the only instance of this
warning I have found. The __vmci_transport_send_control_pkt function
is called either with wait=NULL or with one of the type values that
pass 'wait' into memcpy() here, but not from the same caller.
Replacing the memcpy with a struct assignment is otherwise the same
but avoids the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Bryan Tan <bryan-bt.tan@broadcom.com>
Link: https://patch.msgid.link/20260203163406.2636463-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a9424c756 ]
Several registers referenced in this driver's source code do not
actually exist (they are not writable and read as zero in my testing).
They exist in this driver because it originated as a copy of the dm9601
driver. Notably, these include the multicast filter registers - this
causes the driver to not support multicast packets correctly. Remove
the multicast filter code and register definitions. Instead, set the
chip to receive all multicast filter packets when any multicast
addresses are in the list.
Reviewed-by: Simon Horman <horms@kernel.org> (from v1)
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260203013924.28582-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 820ba7dd68 ]
ath10k_wmi_event_peer_sta_ps_state_chg() uses lockdep_assert_held() to
assert that ar->data_lock should be held by the caller, but neither
ath10k_wmi_10_2_op_rx() nor ath10k_wmi_10_4_op_rx() acquire this lock
before calling this function.
The field arsta->peer_ps_state is documented as protected by
ar->data_lock in core.h, and other accessors (ath10k_peer_ps_state_disable,
ath10k_dbg_sta_read_peer_ps_state) properly acquire this lock.
Add spin_lock_bh()/spin_unlock_bh() around the peer_ps_state update,
and remove the lockdep_assert_held() to be aligned with new locking,
following the pattern used by other WMI event handlers in the driver.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260123175611.767731-1-n7l8m4@u.northwestern.edu
[removed excess blank line]
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70e9a5760a ]
NIX SQ manager sticky mode is known to cause stalls when multiple SQs
share an SMQ and transmit concurrently. Additionally, PSE may deadlock
on transitions between sticky and non-sticky transmissions. There is
also a credit drop issue observed when certain condition clocks are
gated.
work around these hardware errata by:
- Disabling SQM sticky operation:
- Clear TM6 (bit 15)
- Clear TM11 (bit 14)
- Disabling sticky → non-sticky transition path that can deadlock PSE:
- Clear TM5 (bit 23)
- Preventing credit drops by keeping the control-flow clock enabled:
- Set TM9 (bit 21)
These changes are applied via NIX_AF_SQM_DBG_CTL_STATUS. With this
configuration the SQM/PSE maintain forward progress under load without
credit loss, at the cost of disabling sticky optimizations.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260127125147.1642-1-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49d0901e26 ]
hci_conn_enter_active_mode() uses queue_delayed_work() with the
intention that the work will run after the given timeout. However,
queue_delayed_work() does nothing if the work is already queued, so
depending on the link policy we may end up putting the connection
into idle mode every hdev->idle_timeout ms.
Use mod_delayed_work() instead so the work is queued if not already
queued, and the timeout is updated otherwise.
Signed-off-by: Stefan Sørensen <ssorensen@roku.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4bb091013a ]
The connection link policy is only set when establishing an outgoing
ACL connection causing connection idle modes not to be available on
incoming connections. Move the setting of the link policy to the
creation of the connection so all ACL connection will use the link
policy set on the HCI device.
Signed-off-by: Stefan Sørensen <ssorensen@roku.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4dd1dda652 ]
il3945_store_measurement() calls il3945_get_measurement() which internally
calls il_send_cmd_sync() without holding il->mutex. However,
il_send_cmd_sync() has lockdep_assert_held(&il->mutex) indicating that
callers must hold this lock.
Other sysfs store functions in the same file properly acquire the mutex:
- il3945_store_flags() acquires mutex at 3945-mac.c:3110
- il3945_store_filter_flags() acquires mutex at 3945-mac.c:3144
Add mutex_lock()/mutex_unlock() around the il3945_get_measurement() call
in the sysfs store function to fix the missing lock protection.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20260125193005.1090429-1-n7l8m4@u.northwestern.edu
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e31fa691d0 ]
il4965_store_tx_power() calls il_set_tx_power() without holding il->mutex.
However, il_set_tx_power() has lockdep_assert_held(&il->mutex) indicating
that callers must hold this lock.
All other callers of il_set_tx_power() properly acquire the mutex:
- il_bg_scan_completed() acquires mutex at common.c:1683
- il_mac_config() acquires mutex at common.c:5006
- il3945_commit_rxon() and il4965_commit_rxon() are called via work
queues that hold the mutex (like il4965_bg_alive_start)
Add mutex_lock()/mutex_unlock() around the il_set_tx_power() call in
the sysfs store function to fix the missing lock protection.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20260125194039.1196488-1-n7l8m4@u.northwestern.edu
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad22d24be6 ]
RDS connections carry a state "rds_conn_path::cp_state"
and transitions from one state to another and are conditional
upon an expected state: "rds_conn_path_transition."
There is one exception to this conditionality, which is
"RDS_CONN_ERROR" that can be enforced by "rds_conn_path_drop"
regardless of what state the condition is currently in.
But as soon as a connection enters state "RDS_CONN_ERROR",
the connection handling code expects it to go through the
shutdown-path.
The RDS/TCP multipath changes added a shortcut out of
"RDS_CONN_ERROR" straight back to "RDS_CONN_CONNECTING"
via "rds_tcp_accept_one_path" (e.g. after "rds_tcp_state_change").
A subsequent "rds_tcp_reset_callbacks" can then transition
the state to "RDS_CONN_RESETTING" with a shutdown-worker queued.
That'll trip up "rds_conn_init_shutdown", which was
never adjusted to handle "RDS_CONN_RESETTING" and subsequently
drops the connection with the dreaded "DR_INV_CONN_STATE",
which leaves "RDS_SHUTDOWN_WORK_QUEUED" on forever.
So we do two things here:
a) Don't shortcut "RDS_CONN_ERROR", but take the longer
path through the shutdown code.
b) Add "RDS_CONN_RESETTING" to the expected states in
"rds_conn_init_shutdown" so that we won't error out
and get stuck, if we ever hit weird state transitions
like this again."
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260122055213.83608-2-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 833dcd75d5 ]
When the TX queue length reaches the threshold, the netdev watchdog
immediately detects a TX queue timeout.
This patch updates the trans_start timestamp of the transmit queue
on every asynchronous USB URB submission along the transmit path,
ensuring that the network watchdog accurately reflects ongoing
transmission activity.
Signed-off-by: Mingj Ye <insyelu@gmail.com>
Reviewed-by: Hayes Wang <hayeswang@realtek.com>
Link: https://patch.msgid.link/20260120015949.84996-1-insyelu@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0dfffa5479 ]
When compiling a driver written for MIPS on OpenRISC that uses the nop()
function, it fails due to the following error:
drivers/watchdog/pic32-wdt.c: Assembler messages:
drivers/watchdog/pic32-wdt.c:125: Error: unrecognized instruction `nop'
The driver currently uses the generic version of nop() from
include/asm-generic/barrier.h:
#ifndef nop
#define nop() asm volatile ("nop")
#endif
Let's fix this on OpenRISC by defining an architecture-specific version
of nop().
This was tested by performing an allmodconfig openrisc cross compile on
an aarch64 host.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601180236.BVy480We-lkp@intel.com/
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 735ee8582d ]
Quoting reporter:
In net/netfilter/xt_tcpmss.c (lines 53-68), the TCP option parser reads
op[i+1] directly without validating the remaining option length.
If the last byte of the option field is not EOL/NOP (0/1), the code attempts
to index op[i+1]. In the case where i + 1 == optlen, this causes an
out-of-bounds read, accessing memory past the optlen boundary
(either reading beyond the stack buffer _opt or the
following payload).
Reported-by: sungzii <sungzii@pm.me>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a49fc8d8a ]
The upstream commit, 71d8c47fc6
("netfilter: conntrack: introduce clash resolution on insertion race"),
sets allow_clash=true in the UDP/UDPLITE protocol handler
but does not set it in the generic protocol handler.
As a result, packets composed of connectionless protocols at each layer,
such as UDP over IP-in-IP, still drop packets due to conflicts during conntrack insertion.
To resolve this, this patch sets allow_clash in the nf_conntrack_l4proto_generic.
Signed-off-by: Yuto Hamaguchi <Hamaguchi.Yuto@da.MitsubishiElectric.co.jp>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f8dd813a1 ]
Fast commits only log operations that have dedicated replay support.
EXT4_IOC_GROUP_EXTEND grows the filesystem to the end of the last
block group and updates the same on-disk metadata without going
through the fast commit tracking paths.
In practice these operations are rare and usually followed by further
updates, but mixing them into a fast commit makes the overall
semantics harder to reason about and risks replay gaps if new call
sites appear.
Teach ext4 to mark the filesystem fast-commit ineligible when
EXT4_IOC_GROUP_EXTEND grows the filesystem.
This forces those transactions to fall back to a full commit,
ensuring that the group extension changes are captured by the normal
journal rather than partially encoded in fast commit TLVs.
This change should not affect common workloads but makes online
resize via GROUP_EXTEND safer and easier to reason about under fast
commit.
Testing:
1. prepare:
dd if=/dev/zero of=/root/fc_resize.img bs=1M count=0 seek=256
mkfs.ext4 -O fast_commit -F /root/fc_resize.img
mkdir -p /mnt/fc_resize && mount -t ext4 -o loop /root/fc_resize.img /mnt/fc_resize
2. Extended the filesystem to the end of the last block group using a
helper that calls EXT4_IOC_GROUP_EXTEND on the mounted filesystem
and checked fc_info:
./group_extend_helper /mnt/fc_resize
cat /proc/fs/ext4/loop0/fc_info
shows the "Resize" ineligible reason increased.
3. Fsynced a file on the resized filesystem and confirmed that the fast
commit ineligible counter incremented for the resize transaction:
touch /mnt/fc_resize/file
/root/fsync_file /mnt/fc_resize/file
sync
cat /proc/fs/ext4/loop0/fc_info
Signed-off-by: Li Chen <me@linux.beauty>
Link: https://patch.msgid.link/20251211115146.897420-6-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chen-Yu Tsai
Romain Gantois
Benson Leung
Artem Shimko
Liang Jie
Peter Ujfalusi
Daniel Palmer
Brian Masney
Otto Pflüger
Tzung-Bi Shih
Jacky Bai
Mark Brown
Iuliana Prodan
Colin Lord
Kommula Shiva Shankar
Arnd Bergmann
Longfang Liu
Henry Tseng
Md Haris Iqbal
Carl Lee
Johnny-CC Chang
Krishna Chaitanya Chundru
Manivannan Sadhasivam
Keith Busch
Alex Williamson
Håkon Bugge
Ethan Nelson-Moore
Ziyi Guo
Dian-Syuan Yang
Geetha sowjanya
Jacopo Scannella
Shell Chen
Stefan Sørensen
Kuniyuki Iwashima
Jijie Shao
Eric Dumazet
Gerd Rausch
Miri Korenblit
Mingj Ye
Florian Westphal
Yuto Hamaguchi
Li Chen