commit 5c9fcac3c8 upstream.
If the driver executes ks8851_irq() AND a TX packet has been sent, then
the driver enables TX queue via netif_wake_queue() which schedules TX
softirq to queue packets for this device.
If CONFIG_PREEMPT_RT=y is set AND a packet has also been received by
the MAC, then ks8851_rx_pkts() calls netdev_alloc_skb_ip_align() to
allocate SKBs for the received packets. If netdev_alloc_skb_ip_align()
is called with BH enabled, then local_bh_enable() at the end of
netdev_alloc_skb_ip_align() will trigger the pending softirq processing,
which may ultimately call the .xmit callback ks8851_start_xmit_par().
The ks8851_start_xmit_par() will try to lock struct ks8851_net_par
.lock spinlock, which is already locked by ks8851_irq() from which
ks8851_start_xmit_par() was called. This leads to a deadlock, which
is reported by the kernel, including a trace listed below.
If CONFIG_PREEMPT_RT is not set, then since commit 0913ec336a
("net: ks8851: Fix deadlock with the SPI chip variant") the deadlock
can also be triggered without received packet in the RX FIFO. The
pending softirqs will be processed on return from
spin_unlock_bh(&ks->statelock) in ks8851_irq(), which triggers the
deadlock as well.
Fix the problem by disabling BH around critical sections, including the
IRQ handler, thus preventing the net_tx_action() softirq from triggering
during these critical sections. The net_tx_action() softirq is triggered
once BH are re-enabled and at the end of the IRQ handler, once all the
other IRQ handler actions have been completed.
__schedule from schedule_rtlock+0x1c/0x34
schedule_rtlock from rtlock_slowlock_locked+0x548/0x904
rtlock_slowlock_locked from rt_spin_lock+0x60/0x9c
rt_spin_lock from ks8851_start_xmit_par+0x74/0x1a8
ks8851_start_xmit_par from netdev_start_xmit+0x20/0x44
netdev_start_xmit from dev_hard_start_xmit+0xd0/0x188
dev_hard_start_xmit from sch_direct_xmit+0xb8/0x25c
sch_direct_xmit from __qdisc_run+0x1f8/0x4ec
__qdisc_run from qdisc_run+0x1c/0x28
qdisc_run from net_tx_action+0x1f0/0x268
net_tx_action from handle_softirqs+0x1a4/0x270
handle_softirqs from __local_bh_enable_ip+0xcc/0xe0
__local_bh_enable_ip from __alloc_skb+0xd8/0x128
__alloc_skb from __netdev_alloc_skb+0x3c/0x19c
__netdev_alloc_skb from ks8851_irq+0x388/0x4d4
ks8851_irq from irq_thread_fn+0x24/0x64
irq_thread_fn from irq_thread+0x178/0x28c
irq_thread from kthread+0x12c/0x138
kthread from ret_from_fork+0x14/0x28
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Fixes: e0863634bf ("net: ks8851: Queue RX packets in IRQ handler instead of disabling BHs")
Cc: stable@vger.kernel.org
Signed-off-by: Marek Vasut <marex@nabladev.com>
Link: https://patch.msgid.link/20260415231020.455298-1-marex@nabladev.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c263f644ad upstream.
For the device SP, the firmware version is a 32-bit value where the
lower 20 bits represent the base version number. And the customized
firmware version populates the upper 12 bits with a specific
identification number.
For other devices AML 25G and 40G, the upper 12 bits of the firmware
version is always non-zero, and they have other naming conventions.
Only SP devices need to check this to tell if XPCS will work properly.
So the judgement of MAC type is added here.
And the original logic compared the entire 32-bit value against 0x20010,
which caused the outdated base firmwares bypass the version check
without a warning. Apply a mask 0xfffff to isolate the lower 20 bits for
an accurate base version comparison.
Fixes: ab928c24e6 ("net: txgbe: add FW version warning")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/C787AA5C07598B13+20260422071837.372731-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 68efba3644 upstream.
A node sends the BYE packet when it is about to go down. So the nameserver
should advertise the removal of the node to all remote and local observers
and free the node finally. But currently, the nameserver doesn't free the
node memory even after processing the BYE packet. This causes the node
memory to leak.
Hence, remove the node from Xarray list and free the node memory during
both success and failure case of ctrl_cmd_bye().
Cc: stable@vger.kernel.org
Fixes: 0c2204a4ad ("net: qrtr: Migrate nameservice to kernel from userspace")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260409-qrtr-fix-v3-3-00a8a5ff2b51@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8be19e2337 upstream.
According to the datasheet, one-shot mode requires a SYNC_IN pulse to
trigger a new sample conversion. In the current implementation, No sync
pulse was sent after switching to one-shot mode and reinit_completion()
was called before mode switching, creating a race condition where spurious
interrupts during mode change could trigger completion prematurely.
Fix by sending a sync pulse after configuring one-shot mode and
reinit_completion() to ensure it only waits for the actual conversion
completion.
Fixes: a5f8c7da3d ("iio: adc: Add AD7768-1 ADC basic support")
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d5d5f80416 upstream.
pcmtest allocates its pattern buffers and creates its debugfs tree
before registering the platform device and driver, but mod_init()
does not release those resources when a later init step fails.
As a result, a debugfs directory creation failure leaks the pattern
buffers, while platform_device_register() and
platform_driver_register() failures leave both the pattern buffers
and the debugfs tree behind. The recent fix for failed device
registration only dropped the embedded device reference.
Add the missing cleanup for the debugfs tree and pattern buffers in
the remaining module init error paths.
Fixes: 315a3d57c6 ("ALSA: Implement the new Virtual PCM Test Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260421-alsa-pcmtest-init-unwind-v1-1-03fe0c423dbb@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4ff036f952 upstream.
When platform_device_register() fails in mod_init(), the embedded struct
device in pcmtst_pdev has already been initialized by
device_initialize(), but the failure path returns the error without
dropping the device reference for the current platform device:
mod_init()
-> platform_device_register(&pcmtst_pdev)
-> device_initialize(&pcmtst_pdev.dev)
-> setup_pdev_dma_masks(&pcmtst_pdev)
-> platform_device_add(&pcmtst_pdev)
This leads to a reference leak when platform_device_register() fails.
Fix this by calling platform_device_put() before returning the error.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
Fixes: 315a3d57c6 ("ALSA: Implement the new Virtual PCM Test Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260415193138.3861297-1-lgs201920130244@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc88eef8f5 upstream.
usb6fire_control_input_vol_put() stores the analog capture volume
as a signed offset in rt->input_vol[] (-15..+15), but it compares
the cached value against the user-visible mixer value (0..30)
before subtracting 15.
This mixes two domains in the change detection path. Since the
runtime is zero-initialized, the visible default is 15; writing 0
right after probe is ignored, while writing 15 is reported as a
change even though the cached value remains 0.
Normalize the user value before comparing it with the cached offset.
Fixes: 06bb4e7435 ("ALSA: snd-usb-6fire: add analog input volume control")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260416-alsa-6fire-input-volume-change-detection-v1-1-ec78299168df@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28abd224db upstream.
The probe procedure of setup_card() in caiaq driver doesn't treat the
error cases gracefully, e.g. the error from snd_card_register() calls
snd_card_free() but continues. This would lead to a UAF for the
further calls like snd_usb_caiaq_control_init(), as Berk suggested in
another patch in the link below.
However, the problem is not only that; in general, this function drops
the all error handlings (as it's a void function) although its caller
can propagate an error to snd_probe(), which eventually calls
snd_card_free() as a proper error path. That said, we should treat
each error case in setup_card(), and just return the error code
promptly, which is then handled later as a fatal error in snd_probe().
This patch achieves it by changing the setup_card() to return an error
code. Also, the superfluous snd_card_free() call is removed, too.
Note that card->private_free can be set still safely at returning an
error. All called functions in card_free() have checks of the
unassigned resources or NULL checks.
Fixes: 8e3cd08ed8 ("[ALSA] caiaq - add control API and more input features")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20260413034941.1131465-2-berkcgoksel@gmail.com
Link: https://patch.msgid.link/20260414105916.364073-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a3542d1b30 upstream.
control_put() always returns 1 and updates cdev->control_state[]
before sending the USB command. It also ignores transport errors
from usb_bulk_msg(), snd_usb_caiaq_send_command(), and
snd_usb_caiaq_send_command_bank().
That breaks the ALSA .put() contract and can leave control_get()
reporting a cached value the device never accepted.
Return 0 for unchanged values, propagate transport failures,
and restore the cached byte when the write fails.
Fixes: 8e3cd08ed8 ("[ALSA] caiaq - add control API and more input features")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260417-caiaq-control-put-v1-1-c37826e92447@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8146cd333d upstream.
In snd_fasync_work_fn(), which is the offload work for traversing and
processing the pending fasync list, the call of kill_fasync() is done
outside the snd_fasync_lock for avoiding deadlocks. The problem is
that its the references of fasync->on, fasync->signal and fasync->poll
are done there also outside the lock. Since these may be modified by
snd_kill_fasync() call concurrently from other process, inconsistent
values might be passed to kill_fasync(). Although there shouldn't be
critical UAF, it's still better to be addressed.
This patch moves the kill_fasync() argument evaluations inside the
snd_fasync_lock for avoiding the data races above. The handling in
fasync->on flag is optimized in the loop to skip directly.
Also, for more clarity, snd_fasync_free() takes the lock and unlink
the pending entry more directly instead of clearing fasync->on flag.
Reported-by: Jake Lamberson <lamberson.jake@gmail.com>
Fixes: ef34a0ae7a ("ALSA: core: Add async signal helpers")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20260420061721.3253644-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1967f0b1ca upstream.
Commit:
aacf2f9f38 ("io_uring: fix req->apoll_events")
fixed an issue where poll->events and req->apoll_events weren't
synchronized, but then when the commit referenced in Fixes got added,
it didn't ensure the same thing.
If we mask in EPOLLONESHOT in the regular EPOLL_URING_WAKE path, then
ensure it's done for both. Including a link to the original report
below, even though it's mostly nonsense. But it includes a reproducer
that does show that IORING_CQE_F_MORE is set in the previous CQE,
while no more CQEs will be generated for this request. Just ignore
anything that pretends this is security related in any way, it's just
the typical AI nonsense.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/io-uring/CAM0zi7yQzF3eKncgHo4iVM5yFLAjsiob_ucqyWKs=hyd_GqiMg@mail.gmail.com/
Reported-by: Azizcan Daştan <azizcan.d@mileniumsec.com>
Fixes: 4464853277 ("io_uring: pass in EPOLL_URING_WAKE for eventfd signaling and wakeups")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7806c060cc upstream.
Use iio_push_to_buffers_with_ts_unaligned() to avoid unaligned access
when writing the timestamp in the rx_buf.
The previous implementation would have been fine on architectures that
support 4-byte alignment of 64-bit integers but could cause issues on
architectures that require 8-byte alignment.
Fixes: 902c4b2446 ("iio: adc: New driver for TI ADS7950 chips")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 64fac99037 upstream.
Commit 85506aca2e ("selftests/mqueue: Set timeout to 180 seconds")
intended to increase the timeout for mq_perf_tests from the default
kselftest limit of 45 seconds to 180 seconds.
Unfortunately, the file storing this information was incorrectly named
`setting` instead of `settings`, causing the kselftest runner not to
pick up the limit and keep using the default 45 seconds limit.
Fix this by renaming it to `settings` to ensure that the kselftest
runner uses the increased timeout of 180 seconds for this test.
Fixes: 85506aca2e ("selftests/mqueue: Set timeout to 180 seconds")
Cc: <stable@vger.kernel.org> # 5.10.y
Signed-off-by: Simon Liebold <simonlie@amazon.de>
Link: https://lore.kernel.org/r/20260312140200.2224850-1-simonlie@amazon.de
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40f0496b61 upstream.
The NVM Command Set Identify Controller data may report a non-zero
Write Zeroes Size Limit (wzsl). When present, nvme_init_non_mdts_limits()
unconditionally overrides max_zeroes_sectors from wzsl, even if
NVME_QUIRK_DISABLE_WRITE_ZEROES previously set it to zero.
This effectively re-enables write zeroes for devices that need it
disabled, defeating the quirk. Several Kingston OM* drives rely on
this quirk to avoid firmware issues with write zeroes commands.
Check for the quirk before applying the wzsl override.
Fixes: 5befc7c26e ("nvme: implement non-mdts command limits")
Cc: stable@vger.kernel.org
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Assisted-by: claude-opus-4-6-v1
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a8eebf9699 upstream.
The Kingston OM3SGP42048K2-A00 (PCI ID 2646:502f) firmware has a race
condition when processing concurrent write zeroes and DSM (discard)
commands, causing spurious "LBA Out of Range" errors and IOMMU page
faults at address 0x0.
The issue is reliably triggered by running two concurrent mkfs commands
on different partitions of the same drive, which generates interleaved
write zeroes and discard operations.
Disable write zeroes for this device, matching the pattern used for
other Kingston OM* drives that have similar firmware issues.
Cc: stable@vger.kernel.org
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Assisted-by: claude-opus-4-6-v1
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d96f3120a upstream.
When an array check is running it will raise the barrier at which point
normal requests will become blocked and increment the nr_pending value to
signal there is work pending inside of wait_barrier(). NOWAIT requests
do not block and so will return immediately with an error, and additionally
do not increment nr_pending in wait_barrier(). Upstream change commit
43806c3d5b ("raid10: cleanup memleak at raid10_make_request") added a
call to raid_end_bio_io() to fix a memory leak when NOWAIT requests hit
this condition. raid_end_bio_io() eventually calls allow_barrier() and
it will unconditionally do an atomic_dec_and_test(&conf->nr_pending) even
though the corresponding increment on nr_pending didn't happen in the
NOWAIT case.
This can be easily seen by starting a check operation while an application
is doing nowait IO on the same array. This results in a deadlocked state
due to nr_pending value underflowing and so the md resync thread gets stuck
waiting for nr_pending to == 0.
Output of r10conf state of the array when we hit this condition:
crash> struct r10conf
barrier = 1,
nr_pending = {
counter = -41
},
nr_waiting = 15,
nr_queued = 0,
Example of md_sync thread stuck waiting on raise_barrier() and other
requests stuck in wait_barrier():
md1_resync
[<0>] raise_barrier+0xce/0x1c0
[<0>] raid10_sync_request+0x1ca/0x1ed0
[<0>] md_do_sync+0x779/0x1110
[<0>] md_thread+0x90/0x160
[<0>] kthread+0xbe/0xf0
[<0>] ret_from_fork+0x34/0x50
[<0>] ret_from_fork_asm+0x1a/0x30
kworker/u1040:2+flush-253:4
[<0>] wait_barrier+0x1de/0x220
[<0>] regular_request_wait+0x30/0x180
[<0>] raid10_make_request+0x261/0x1000
[<0>] md_handle_request+0x13b/0x230
[<0>] __submit_bio+0x107/0x1f0
[<0>] submit_bio_noacct_nocheck+0x16f/0x390
[<0>] ext4_io_submit+0x24/0x40
[<0>] ext4_do_writepages+0x254/0xc80
[<0>] ext4_writepages+0x84/0x120
[<0>] do_writepages+0x7a/0x260
[<0>] __writeback_single_inode+0x3d/0x300
[<0>] writeback_sb_inodes+0x1dd/0x470
[<0>] __writeback_inodes_wb+0x4c/0xe0
[<0>] wb_writeback+0x18b/0x2d0
[<0>] wb_workfn+0x2a1/0x400
[<0>] process_one_work+0x149/0x330
[<0>] worker_thread+0x2d2/0x410
[<0>] kthread+0xbe/0xf0
[<0>] ret_from_fork+0x34/0x50
[<0>] ret_from_fork_asm+0x1a/0x30
Fixes: 43806c3d5b ("raid10: cleanup memleak at raid10_make_request")
Cc: stable@vger.kernel.org
Signed-off-by: Josh Hunt <johunt@akamai.com>
Link: https://lore.kernel.org/linux-raid/20260303005619.1352958-1-johunt@akamai.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bbc6c0dda5 upstream.
snd_seq_oss_write() currently returns the raw load_patch() callback
result for SEQ_FULLSIZE events.
That callback is documented as returning 0 on success and -errno on
failure, but snd_seq_oss_write() is the file write path and should
report the number of user bytes consumed on success. Some in-tree
backends also return backend-specific positive values, which can still
be shorter than the original write size.
Return the full byte count for successful SEQ_FULLSIZE writes.
Preserve negative errors and convert any nonnegative completion to the
original count.
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260324-alsa-seq-oss-fullsize-write-return-v1-1-66d448510538@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d61662197 upstream.
spdif_passthru_playback_get_resources() uses atc->pll_rate as the RSR
for the MSR calculation loop. However, pll_rate is only updated in
atc_pll_init() and not in hw_pll_init(), so it remains 0 after the
card init.
When spdif_passthru_playback_setup() skips atc_pll_init() for
32000 Hz, (rsr * desc.msr) always becomes 0, causing the loop to spin
indefinitely.
Add fallback to use atc->rsr when atc->pll_rate is 0. This reflects
the hardware state, since hw_card_init() already configures the PLL
to the default RSR.
Fixes: 8cc7236148 ("ALSA: SB X-Fi driver merge")
Cc: stable@vger.kernel.org
Signed-off-by: Harin Lee <me@harin.net>
Link: https://patch.msgid.link/20260406074913.217374-1-me@harin.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4ec93f070e upstream.
i2sbus_add_dev() keeps the matched "sound" child pointer after
for_each_child_of_node() has dropped the iterator reference. Take an
extra reference before saving that node and drop it after the
layout-id/device-id lookup is complete.
The function also stores np in dev->sound.ofdev.dev.of_node without
taking a reference for the embedded soundbus device. Since i2sbus
overrides the embedded platform device release callback, balance that
reference explicitly in the local error path and in i2sbus_release_dev().
Fixes: f3d9478b2c ("[ALSA] snd-aoa: add snd-aoa")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260330-aoa-i2sbus-ofnode-lifetime-v1-1-51c309f4ff06@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25947cc5b2 upstream.
ext2_iget() already rejects inodes with i_nlink == 0 when i_mode is
zero or i_dtime is set, treating them as deleted. However, the case of
i_nlink == 0 with a non-zero mode and zero dtime slips through. Since
ext2 has no orphan list, such a combination can only result from
filesystem corruption - a legitimate inode deletion always sets either
i_dtime or clears i_mode before freeing the inode.
A crafted image can exploit this gap to present such an inode to the
VFS, which then triggers WARN_ON inside drop_nlink() (fs/inode.c) via
ext2_unlink(), ext2_rename() and ext2_rmdir():
WARNING: CPU: 3 PID: 609 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336
CPU: 3 UID: 0 PID: 609 Comm: syz-executor Not tainted 6.12.77+ #1
Call Trace:
<TASK>
inode_dec_link_count include/linux/fs.h:2518 [inline]
ext2_unlink+0x26c/0x300 fs/ext2/namei.c:295
vfs_unlink+0x2fc/0x9b0 fs/namei.c:4477
do_unlinkat+0x53e/0x730 fs/namei.c:4541
__x64_sys_unlink+0xc6/0x110 fs/namei.c:4587
do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
WARNING: CPU: 0 PID: 646 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336
CPU: 0 UID: 0 PID: 646 Comm: syz.0.17 Not tainted 6.12.77+ #1
Call Trace:
<TASK>
inode_dec_link_count include/linux/fs.h:2518 [inline]
ext2_rename+0x35e/0x850 fs/ext2/namei.c:374
vfs_rename+0xf2f/0x2060 fs/namei.c:5021
do_renameat2+0xbe2/0xd50 fs/namei.c:5178
__x64_sys_rename+0x7e/0xa0 fs/namei.c:5223
do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
WARNING: CPU: 0 PID: 634 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336
CPU: 0 UID: 0 PID: 634 Comm: syz-executor Not tainted 6.12.77+ #1
Call Trace:
<TASK>
inode_dec_link_count include/linux/fs.h:2518 [inline]
ext2_rmdir+0xca/0x110 fs/ext2/namei.c:311
vfs_rmdir+0x204/0x690 fs/namei.c:4348
do_rmdir+0x372/0x3e0 fs/namei.c:4407
__x64_sys_unlinkat+0xf0/0x130 fs/namei.c:4577
do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Extend the existing i_nlink == 0 check to also catch this case,
reporting the corruption via ext2_error() and returning -EFSCORRUPTED.
This rejects the inode at load time and prevents it from reaching any
of the namei.c paths.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://patch.msgid.link/20260404152011.2590197-1-kovalev@altlinux.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7809fea20c upstream.
In the remove callback, if a packet arrives after destroy_workqueue() is
called, but before sock_release(), the qrtr_ns_data_ready() callback will
try to queue the work, causing use-after-free issue.
Fix this issue by saving the default 'sk_data_ready' callback during
qrtr_ns_init() and use it to replace the qrtr_ns_data_ready() callback at
the start of remove(). This ensures that even if a packet arrives after
destroy_workqueue(), the work struct will not be dereferenced.
Note that it is also required to ensure that the RX threads are completed
before destroying the workqueue, because the threads could be using the
qrtr_ns_data_ready() callback.
Cc: stable@vger.kernel.org
Fixes: 0c2204a4ad ("net: qrtr: Migrate nameservice to kernel from userspace")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260409-qrtr-fix-v3-5-00a8a5ff2b51@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 943b1f27a3 upstream.
The devm_gpiod_get_optional() function may return an error pointer
(ERR_PTR) in case of a genuine failure during GPIO acquisition,
not just NULL which indicates the legitimate absence of an optional
GPIO.
Add an IS_ERR() check after the function call to catch such errors and
propagate them to the probe function, ensuring the driver fails to load
safely rather than proceeding with an invalid pointer.
Fixes: 1283b3b8f8 ("media: i2c: Add driver for Sony IMX219 sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8cdf30813e upstream.
The ts_kmp algorithm stores its prefix_tbl[] table and pattern in a single
allocation sized from the pattern length. If the prefix_tbl[] size
calculation wraps, the resulting allocation can be too small and
subsequent pattern copies can overflow it.
Fix this by rejecting zero-length patterns and by using overflow helpers
before calculating the combined allocation size.
This fixes a potential heap overflow. The pattern length calculation can
wrap during a size_t addition, leading to an undersized allocation.
Because the textsearch library is reachable from userspace via Netfilter's
xt_string module, this is a security risk that should be backported to LTS
kernels.
Link: https://lkml.kernel.org/r/20260308202028.2889285-2-objecting@objecting.org
Signed-off-by: Josh Law <objecting@objecting.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 41d78cb724 upstream.
UAC uses 2 bytes to store volume values, so the maximum volume range is
0xFFFF (65535, val = -32768/32767/1).
The reverted commit bumpped the range of triggering the warning to >
65535, effectively making the range check a no-op. It didn't fix
anything but covered any potential problems and deviated from the
original intention of the range check.
This reverts commit 6b971191fc.
Fixes: 6b971191fc ("ALSA: usb: Increase volume range that triggers a warning")
Cc: stable@vger.kernel.org
Signed-off-by: Rong Zhang <i@rong.moe>
Acked-by: Arun Raghavan <arunr@valvesoftware.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260303194805.266158-2-i@rong.moe
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3446beddba upstream.
epf_ntb_epc_destroy() duplicates the teardown that the caller is
supposed to do later. This leads to an oops when .allow_link fails or
when .drop_link is performed. Remove the helper.
Also drop pci_epc_put(). EPC device refcounting is tied to configfs EPC
group lifetime, and pci_epc_put() in the .drop_link path is sufficient.
Fixes: 8b821cf761 ("PCI: endpoint: Add EP function driver to provide NTB functionality")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260226084142.2226875-3-den@valinux.co.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 34c519feef upstream.
The mtk_jpeg_release() function frees the context structure (ctx) without
first cancelling any pending or running work in ctx->jpeg_work. This
creates a race window where the workqueue callback may still be accessing
the context memory after it has been freed.
Race condition:
CPU 0 (release) CPU 1 (workqueue)
---------------- ------------------
close()
mtk_jpeg_release()
mtk_jpegenc_worker()
ctx = work->data
// accessing ctx
kfree(ctx) // freed!
access ctx // UAF!
The work is queued via queue_work() during JPEG encode/decode operations
(via mtk_jpeg_device_run). If the device is closed while work is pending
or running, the work handler will access freed memory.
Fix this by calling cancel_work_sync() BEFORE acquiring the mutex. This
ordering is critical: if cancel_work_sync() is called after mutex_lock(),
and the work handler also tries to acquire the same mutex, it would cause
a deadlock.
Note: The open error path does NOT need cancel_work_sync() because
INIT_WORK() only initializes the work structure - it does not schedule
it. Work is only scheduled later during ioctl operations.
Fixes: 5fb1c2361e ("mtk-jpegenc: add jpeg encode worker interface")
Cc: stable@vger.kernel.org
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0da8a8cac upstream.
snd_ctl_elem_init_enum_names() advances pointer p through the names
buffer while decrementing buf_len. If buf_len reaches zero but items
remain, the next iteration calls strnlen(p, 0).
While strnlen(p, 0) returns 0 and would hit the existing name_len == 0
error path, CONFIG_FORTIFY_SOURCE's fortified strnlen() first checks
maxlen against __builtin_dynamic_object_size(). When Clang loses track
of p's object size inside the loop, this triggers a BRK exception panic
before the return value is examined.
Add a buf_len == 0 guard at the loop entry to prevent calling fortified
strnlen() on an exhausted buffer.
Found by kernel fuzz testing through Xiaomi Smartphone.
Fixes: 8d448162bd ("ALSA: control: add support for ENUMERATED user space controls")
Cc: stable@vger.kernel.org
Signed-off-by: Ziqing Chen <chenziqing@xiaomi.com>
Link: https://patch.msgid.link/20260414132437.261304-1-chenziqing@xiaomi.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8cd35ceadc upstream.
Fix kernel panic caused by race condition where v4l2_m2m_ctx_release()
frees m2m_ctx while v4l2_m2m_try_run() is about to call device_run
with the same context.
Race sequence:
v4l2_m2m_try_run(): v4l2_m2m_ctx_release():
lock/unlock v4l2_m2m_cancel_job()
job_abort()
v4l2_m2m_job_finish()
kfree(m2m_ctx) <- frees ctx
device_run() <- use-after-free crash at 0x538
Crash trace:
Unable to handle kernel read from unreadable memory at virtual address
0000000000000538
v4l2_m2m_try_run+0x78/0x138
v4l2_m2m_device_run_work+0x14/0x20
The amphion vpu driver does not rely on the m2m framework's device_run
callback to perform encode/decode operations.
Fix the race by preventing m2m framework job scheduling entirely:
- Add job_ready callback returning 0 (no jobs ready for m2m framework)
- Remove job_abort callback to avoid the race condition
Fixes: 3cd084519c ("media: amphion: add vpu v4l2 m2m support")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07fd339b2c upstream.
The function testdrv_probe() retrieves the device_node from the PCI
device, applies an overlay, and then immediately calls of_node_put(dn).
This releases the reference held by the PCI core, potentially freeing
the node if the reference count drops to zero. Later, the same freed
pointer 'dn' is passed to of_platform_default_populate(), leading to a
use-after-free.
The reference to pdev->dev.of_node is owned by the device model and
should not be released by the driver. Remove the erroneous of_node_put()
to prevent premature freeing.
Fixes: 26409dd045 ("of: unittest: Add pci_dt_testdrv pci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260409034859.429071-1-vulab@iscas.ac.cn
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8fc6056dcf ]
As reported, on-disk footer.ino and footer.nid is the same and
out-of-range, let's add sanity check on f2fs_alloc_nid() to detect
any potential corruption in free_nid_list.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Robert Garcia <rob_garcia@163.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 91e901c65b upstream.
Building ARCH=um on glibc >= 2.43 fails:
arch/um/drivers/cow_user.c: error: implicit declaration of
function 'strrchr' [-Wimplicit-function-declaration]
glibc 2.43's C23 const-preserving strrchr() macro does not survive
UML's global -Dstrrchr=kernel_strrchr remap from arch/um/Makefile.
Call kernel_strrchr() directly in cow_user.c so the source no longer
depends on the -D rewrite.
Fixes: 2c51a4bc02 ("um: fix strrchr() problems")
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Assisted-by: Codex:gpt-5-4
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260408070102.2325572-1-michael.bommarito@gmail.com
[remove unnecessary 'extern']
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb101d2abd upstream.
pci_upstream_bridge() returns NULL if the device is on a root bus. If
8821CE is installed in the system with such a PCI topology, the probing
routine will crash. This has probably been unnoticed as 8821CE is mostly
supplied in laptops where there is a PCI-to-PCI bridge located upstream
from the device. However the card might be installed on a system with
different configuration.
Check if the bridge does exist for the specific workaround to be applied.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool.
Fixes: 24f5e38a13 ("rtw88: Disable PCIe ASPM while doing NAPI poll on 8821CE")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260220094730.49791-1-pchelkin@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek Vasut
Ruijie Li
Jiawen Wu
Ao Zhou
Manivannan Sadhasivam
Yiyang Chen
David Howells
Jonathan Santos
Cássio Gabriel
Guangshuo Li
Takashi Iwai
Jens Axboe
Longxuan Yu
David Lechner
Pavel Begunkov
Dawei Feng
Simon Liebold
Ben Levinsky
Helge Deller
Robert Beckett
Josh Hunt
Gao Xiang
Harin Lee
Vasiliy Kovalev
Chen Ni
Josh Law
Rong Zhang
Koichiro Den
Fan Wu
Luxiao Xu
Zhengchuan Liang
Ziqing Chen
Ming Qian
Wentao Liang
Herbert Xu
Chao Yu
Johan Hovold
Michael Bommarito
Fedor Pchelkin