[ Upstream commit a913d1f6a7 ]
Following test can cause IO hang:
mdadm -CvR /dev/md0 -l10 -n4 /dev/sd[abcd] --assume-clean --chunk=64K --bitmap=none
sleep 5
echo 1 > /sys/block/sda/device/delete
echo 1 > /sys/block/sdb/device/delete
echo 1 > /sys/block/sdc/device/delete
echo 1 > /sys/block/sdd/device/delete
dd if=/dev/md0 of=/dev/null bs=8k count=1 iflag=direct
Root cause:
1) all disks removed, however all rdevs in the array is still in sync,
IO will be issued normally.
2) IO failure from sda, and set badblocks failed, sda will be faulty
and MD_SB_CHANGING_PENDING will be set.
3) error recovery try to recover this IO from other disks, IO will be
issued to sdb, sdc, and sdd.
4) IO failure from sdb, and set badblocks failed again, now array is
broken and will become read-only.
5) IO failure from sdc and sdd, however, stripe can't be handled anymore
because MD_SB_CHANGING_PENDING is set:
handle_stripe
handle_stripe
if (test_bit MD_SB_CHANGING_PENDING)
set_bit STRIPE_HANDLE
goto finish
// skip handling failed stripe
release_stripe
if (test_bit STRIPE_HANDLE)
list_add_tail conf->hand_list
6) later raid5d can't handle failed stripe as well:
raid5d
md_check_recovery
md_update_sb
if (!md_is_rdwr())
// can't clear pending bit
return
if (test_bit MD_SB_CHANGING_PENDING)
break;
// can't handle failed stripe
Since MD_SB_CHANGING_PENDING can never be cleared for read-only array,
fix this problem by skip this checking for read-only array.
Link: https://lore.kernel.org/linux-raid/20251117085557.770572-3-yukuai@fnnas.com
Fixes: d87f064f58 ("md: never update metadata when array is read-only.")
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Li Nan <linan122@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e81fa8d80 ]
The "qcom,halt-regs" consists of a phandle reference followed by the
three offsets within syscon for halt registers. Thus, we need to
request 4 integers from of_property_read_variable_u32_array(), with
the halt_reg ofsets at indexes 1, 2, and 3. Offset 0 is the phandle.
With MAX_HALT_REG at 3, of_property_read_variable_u32_array() returns
-EOVERFLOW, causing .probe() to fail.
Increase MAX_HALT_REG to 4, and update the indexes accordingly.
Fixes: 0af65b9b91 ("remoteproc: qcom: wcss: Add non pas wcss Q6 support for QCS404")
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://lore.kernel.org/r/20251129013207.3981517-1-mr.nuke.me@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c909fec69f ]
There are several places where a value of type 'int' is shifted by
lpddr->chipshift. lpddr->chipshift is derived from QINFO geometry and
might reach 31 when QINFO reports a 2 GiB size - the maximum supported by
LPDDR(1) compliant chips. This may cause unexpected sign-extensions when
casting the integer value to the type of 'unsigned long'.
Use '1UL << lpddr->chipshift' and cast 'j' to unsigned long before
shifting so the computation is performed at the destination width.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c68264711c ("[MTD] LPDDR Command set driver")
Signed-off-by: Ivan Stepchenko <sid@itb.spb.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c28ee720a ]
Jakub reported increased flakiness in bond_macvlan_ipvlan.sh on regular
kernel, while the tests consistently pass on a debug kernel. This suggests
a timing-sensitive issue.
To mitigate this, introduce a short sleep before each xvlan_over_bond
connectivity check. The delay helps ensure neighbor and route cache
have fully converged before verifying connectivity.
The sleep interval is kept minimal since check_connection() is invoked
nearly 100 times during the test.
Fixes: 246af950b9 ("selftests: bonding: add macvlan over bond testing")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20251114082014.750edfad@kernel.org
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251127143310.47740-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98693e0897 ]
Thanks to a device generating an ACS violation during bus reset,
lockdep reported the following circular locking issue:
CPU0: SET_IRQS (MSI/X): holds igate, acquires memory_lock
CPU1: HOT_RESET: holds memory_lock, acquires pci_bus_sem
CPU2: AER: holds pci_bus_sem, acquires igate
This results in a potential 3-way deadlock.
Remove the pci_bus_sem->igate leg of the triangle by using RCU
to peek at the eventfd rather than locking it with igate.
Fixes: 3be3a074cf ("vfio-pci: Don't use device_lock around AER interrupt setup")
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20251124223623.2770706-1-alex@shazbot.org
Signed-off-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 545d1287e4 ]
Discovered by Atuin - Automated Vulnerability Discovery Engine.
The 'len' variable is calculated as 'min(32, trans->len + 1)',
which includes the 1-byte command header.
When copying data from 'trans->tx_buf' to 'ch341->tx_buf + 1', using 'len'
as the length is incorrect because:
1. It causes an out-of-bounds read from 'trans->tx_buf' (which has size
'trans->len', i.e., 'len - 1' in this context).
2. It can cause an out-of-bounds write to 'ch341->tx_buf' if 'len' is
CH341_PACKET_LENGTH (32). Writing 32 bytes to ch341->tx_buf + 1
overflows the buffer.
Fix this by copying 'len - 1' bytes.
Fixes: 8846739f52 ("spi: add ch341a usb2spi driver")
Signed-off-by: Tianchu Chen <flynnnchen@tencent.com>
Link: https://patch.msgid.link/20251128160630.0f922c45ec6084a46fb57099@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3623e1ae1 ]
devm_pm_runtime_enable() can fail due to memory allocation failures.
The current code ignores its return value and proceeds with
pm_runtime_resume_and_get(), which may operate on incorrectly
initialized runtime PM state.
Check the return value of devm_pm_runtime_enable() and return the
error code if it fails.
Fixes: 6a2277a0eb ("mtd: rawnand: renesas: Use runtime PM instead of the raw clock API")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8048168df5 ]
The extra "count >= limit" check in stmmac_rx_zc() is redundant and
has no effect because the value of "count" doesn't change after the
while condition at this point.
However, it can change after "read_again:" label:
while (count < limit) {
...
if (count >= limit)
break;
read_again:
...
/* XSK pool expects RX frame 1:1 mapped to XSK buffer */
if (likely(status & rx_not_ls)) {
xsk_buff_free(buf->xdp);
buf->xdp = NULL;
dirty++;
count++;
goto read_again;
}
...
This patch addresses the same issue previously resolved in stmmac_rx()
by commit fa02de9e75 ("net: stmmac: fix rx budget limit check").
The fix is the same: move the check after the label to ensure that it
bounds the goto loop.
Fixes: bba2556efa ("net: stmmac: Enable RX via AF_XDP zero-copy")
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20251126104327.175590-1-aleksei.kodanev@bell-sw.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69894e5b4c ]
Connlimit expression can be used for all kind of packets and not only
for packets with connection state new. See this ruleset as example:
table ip filter {
chain input {
type filter hook input priority filter; policy accept;
tcp dport 22 ct count over 4 counter
}
}
Currently, if the connection count goes over the limit the counter will
count the packets. When a connection is closed, the connection count
won't decrement as it should because it is only updated for new
connections due to an optimization on __nf_conncount_add() that prevents
updating the list if the connection is duplicated.
To solve this problem, check whether the connection was skipped and if
so, update the list. Adjust count_tree() too so the same fix is applied
for xt_connlimit.
Fixes: 976afca1ce ("netfilter: nf_conncount: Early exit in nf_conncount_lookup() and cleanup")
Closes: https://lore.kernel.org/netfilter/trinity-85c72a88-d762-46c3-be97-36f10e5d9796-1761173693813@3c-app-mailcom-bs12/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be102eb6a0 ]
When using nf_conncount infrastructure for non-confirmed connections a
duplicated track is possible due to an optimization introduced since
commit d265929930 ("netfilter: nf_conncount: reduce unnecessary GC").
In order to fix this introduce a new conncount API that receives
directly an sk_buff struct. It fetches the tuple and zone and the
corresponding ct from it. It comes with both existing conncount variants
nf_conncount_count_skb() and nf_conncount_add_skb(). In addition remove
the old API and adjust all the users to use the new one.
This way, for each sk_buff struct it is possible to check if there is a
ct present and already confirmed. If so, skip the add operation.
Fixes: d265929930 ("netfilter: nf_conncount: reduce unnecessary GC")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 634f3853cc ]
Add a sanity check to skip path discovery if the maximum number of
encapsulation is reached. While at it, check for underflow too.
Fixes: 26267bf9bb ("netfilter: flowtable: bridge vlan hardware offload and switchdev")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fb3acdebf ]
Commit 97523a4edb ("kernel/resource: remove first_lvl / siblings_only
logic") removed an optimization introduced by commit 756398750e
("resource: avoid unnecessary lookups in find_next_iomem_res()"). That
was not called out in the message of the first commit explicitly so it's
not entirely clear whether removing the optimization happened
inadvertently or not.
As the original commit message of the optimization explains there is no
point considering the children of a subtree in find_next_iomem_res() if
the top level range does not match.
Reinstating the optimization results in performance improvements in
systems where /proc/iomem is ~5k lines long. Calling mmap() on /dev/mem
in such platforms takes 700-1500μs without the optimisation and 10-50μs
with the optimisation.
Note that even though commit 97523a4edb removed the 'sibling_only'
parameter from next_resource(), newer kernels have basically reinstated it
under the name 'skip_children'.
Link: https://lore.kernel.org/all/20251124165349.3377826-1-ilstam@amazon.com/T/#u
Fixes: 97523a4edb ("kernel/resource: remove first_lvl / siblings_only logic")
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: "Huang, Ying" <huang.ying.caritas@gmail.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cc15a10c3 ]
regulator_supply_alias_list was accessed without any locking in
regulator_supply_alias(), regulator_register_supply_alias(), and
regulator_unregister_supply_alias(). Concurrent registration,
unregistration and lookups can race, leading to:
1 use-after-free if an alias entry is removed while being read,
2 duplicate entries when two threads register the same alias,
3 inconsistent alias mappings observed by consumers.
Protect all traversals, insertions and deletions on
regulator_supply_alias_list with the existing regulator_list_mutex.
Fixes: a06ccd9c37 ("regulator: core: Add ability to create a lookup alias for supply")
Signed-off-by: sparkhuang <huangshaobo3@xiaomi.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127025716.5440-1-huangshaobo3@xiaomi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ff147fdfa ]
Commit 8c3170628a ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: f77cbb9a3e ("ARM: dts: exynos: Add bcm4334 device node to Trats2")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-5-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97cc9c346b ]
Commit 8c3170628a ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: a19f6efc01 ("ARM: dts: exynos: Enable WLAN support for the Trats board")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-4-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 863d69923b ]
Commit 8c3170628a ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: 8620cc2f99 ("ARM: dts: exynos: Add devicetree file for the Galaxy S2")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-3-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97aee67e24 ]
Commit 8c3170628a ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: f1b0ffaa68 ("ARM: dts: exynos: Enable WLAN support for the UniversalC210 board")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-2-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 061795b345 ]
Airoha EN7523 specific bug
--------------------------
We found that some serial console may pull TX line to GROUND during board
boot time. Airoha uses TX line as one of its bootstrap pins. On the EN7523
SoC this may lead to booting in RESERVED boot mode.
It was found that some flashes operates incorrectly in RESERVED mode.
Micron and Skyhigh flashes are definitely affected by the issue,
Winbond flashes are not affected.
Details:
--------
DMA reading of odd pages on affected flashes operates incorrectly. Page
reading offset (start of the page) on hardware level is replaced by 0x10.
Thus results in incorrect data reading. As result OS loading becomes
impossible.
Usage of UBI make things even worse. On attaching, UBI will detects
corruptions (because of wrong reading of odd pages) and will try to
recover. For recovering UBI will erase and write 'damaged' blocks with
a valid information. This will destroy all UBI data.
Non-DMA reading is OK.
This patch detects booting in reserved mode, turn off DMA and print big
fat warning.
It's worth noting that the boot configuration is preserved across reboots.
Therefore, to boot normally, you should do the following:
- disconnect the serial console from the board,
- power cycle the board.
Fixes: a403997c12 ("spi: airoha: add SPI-NAND Flash controller driver")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://patch.msgid.link/20251125234047.1101985-2-mikhail.kshevetskiy@iopsys.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 731ca4a4cc ]
Use %pe instead of %ps when printing ERR_PTR() values. %ps is intended
for string pointers, while %pe correctly prints symbolic error names
for error pointers returned via ERR_PTR().
This shows the returned error value more clearly.
Fixes: 67f27b8b3a ("pds_vdpa: subscribe to the pds_core events")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20251018174705.1511982-1-alok.a.tiwari@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0ea2e9109 ]
When query_virtqueues() fails, the error log prints the variable err
instead of cmd->err. Since err may still be zero at this point, the
log message can misleadingly report a success value 0 even though the
command actually failed.
Even worse, once err is set to the first failure, subsequent logs
print that same stale value. This makes the error reporting appear
one step behind the actual failing queue index, which is confusing
and misleading.
Fix the log to report cmd->err, which reflects the real failure code
returned by the firmware.
Fixes: 1fcdf43ea6 ("vdpa/mlx5: Use async API for vq query command")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20250929134258.80956-1-alok.a.tiwari@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 546dbb0223 ]
Starting with commit 69a8b62a7a ("riscv: acpi: avoid errors caused by
probing DT devices when ACPI is used"), riscv images no longer populate
devicetree if ACPI is enabled. This causes unit tests to fail which require
the root node to be set.
# Subtest: of_dtb
# module: of_test
1..2
# of_dtb_root_node_found_by_path: EXPECTATION FAILED at drivers/of/of_test.c:21
Expected np is not null, but is
# of_dtb_root_node_found_by_path: pass:0 fail:1 skip:0 total:1
not ok 1 of_dtb_root_node_found_by_path
# of_dtb_root_node_populates_of_root: EXPECTATION FAILED at drivers/of/of_test.c:31
Expected of_root is not null, but is
# of_dtb_root_node_populates_of_root: pass:0 fail:1 skip:0 total:1
not ok 2 of_dtb_root_node_populates_of_root
Skip those tests for RISCV if the root node is not populated.
Fixes: 69a8b62a7a ("riscv: acpi: avoid errors caused by probing DT devices when ACPI is used")
Cc: Han Gao <rabenda.cn@gmail.com>
Cc: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Paul Walmsley <pjw@kernel.org> # arch/riscv
Link: https://patch.msgid.link/20251023160415.705294-1-linux@roeck-us.net
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9ee3ff810 ]
When the MB_CHECK_ASSERT macro is enabled, we found that the
current validation logic in __mb_check_buddy has a gap in
detecting certain invalid buddy states, particularly related
to order-0 (bitmap) bits.
The original logic consists of three steps:
1. Validates higher-order buddies: if a higher-order bit is
set, at most one of the two corresponding lower-order bits
may be free; if a higher-order bit is clear, both lower-order
bits must be allocated (and their bitmap bits must be 0).
2. For any set bit in order-0, ensures all corresponding
higher-order bits are not free.
3. Verifies that all preallocated blocks (pa) in the group
have pa_pstart within bounds and their bitmap bits marked as
allocated.
However, this approach fails to properly validate cases where
order-0 bits are incorrectly cleared (0), allowing some invalid
configurations to pass:
corrupt integral
order 3 1 1
order 2 1 1 1 1
order 1 1 1 1 1 1 1 1 1
order 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Here we get two adjacent free blocks at order-0 with inconsistent
higher-order state, and the right one shows the correct scenario.
The root cause is insufficient validation of order-0 zero bits.
To fix this and improve completeness without significant performance
cost, we refine the logic:
1. Maintain the top-down higher-order validation, but we no longer
check the cases where the higher-order bit is 0, as this case will
be covered in step 2.
2. Enhance order-0 checking by examining pairs of bits:
- If either bit in a pair is set (1), all corresponding
higher-order bits must not be free.
- If both bits are clear (0), then exactly one of the
corresponding higher-order bits must be free
3. Keep the preallocation (pa) validation unchanged.
This change closes the validation gap, ensuring illegal buddy states
involving order-0 are correctly detected, while removing redundant
checks and maintaining efficiency.
Fixes: c9de560ded ("ext4: Add multi block allocator for ext4")
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Yongjian Sun <sunyongjian1@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251106060614.631382-3-sunyongjian@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6a45ee760 ]
ublk_ch_uring_cmd_local() may jump to the out label before
initialising the io pointer. This will cause trouble if DEBUG is
defined, because the pr_devel() call dereferences io. Clang reports:
drivers/block/ublk_drv.c:2403:6: error: variable 'io' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
2403 | if (tag >= ub->dev_info.queue_depth)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/block/ublk_drv.c:2492:32: note: uninitialized use occurs here
2492 | __func__, cmd_op, tag, ret, io->flags);
|
Fix this by initialising io to NULL and checking it before
dereferencing it.
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Fixes: 71f28f3136 ("ublk_drv: add io_uring based userspace block driver")
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17e7972979 ]
On all AMD AM4 systems I have seen, e.g ASUS X470-i, Pro WS X570 Ace
and equivalent Gigabyte, amd-pstate does not initialize when the
x2apic is enabled in the BIOS. Kernel debug messages include:
[ 0.315438] acpi LNXCPU:00: Failed to get CPU physical ID.
[ 0.354756] ACPI CPPC: No CPC descriptor for CPU:0
[ 0.714951] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
I tracked this down to map_x2apic_id() checking device_declaration
passed in via the type argument of acpi_get_phys_id() via
map_madt_entry() while map_lapic_id() does not.
It appears these BIOSes use Processor statements for declaring the CPUs
in the ACPI namespace instead of processor device objects (which should
have been used). CPU declarations via Processor statements were
deprecated in ACPI 6.0 that was released 10 years ago. They should not
be used any more in any contemporary platform firmware.
I tried to contact Asus support multiple times, but never received a
reply nor did any BIOS update ever change this.
Fix amd-pstate w/ x2apic on am4 by allowing map_x2apic_id() to work with
CPUs declared via Processor statements for IDs less than 255, which is
consistent with ACPI 5.0 that still allowed Processor statements to be
used for declaring CPUs.
Fixes: 7237d3de78 ("x86, ACPI: add support for x2apic ACPI extensions")
Signed-off-by: René Rebe <rene@exactco.de>
[ rjw: Changelog edits ]
Link: https://patch.msgid.link/20251126.165513.1373131139292726554.rene@exactco.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f88425ef5 ]
In sy7636a_sensor_probe(), regulator_enable() is called but if
devm_hwmon_device_register_with_info() fails, the function returns
without calling regulator_disable(), leaving the regulator enabled
and leaking the reference count.
Switch to devm_regulator_get_enable() to automatically
manage the regulator resource.
Fixes: de34a40532 ("hwmon: sy7636a: Add temperature driver for sy7636a")
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20251126162602.2086-1-vulab@iscas.ac.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a79482699 ]
The .H_SYNC_POLARITY and .V_SYNC_POLARITY variables are 1 bit bitfields
of a u32. The ATOM_HSYNC_POLARITY define is 0x2 and the
ATOM_VSYNC_POLARITY is 0x4. When we do a bitwise negate of 0, 2, or 4
then the last bit is always 1 so this code always sets .H_SYNC_POLARITY
and .V_SYNC_POLARITY to true.
This code is instead intended to check if the ATOM_HSYNC_POLARITY or
ATOM_VSYNC_POLARITY flags are set and reverse the result. In other
words, it's supposed to be a logical negate instead of a bitwise negate.
Fixes: ae79c310b1 ("drm/amd/display: Add DCE12 bios parser support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6df0f649c ]
wait_for_completion_timeout() returns the remaining jiffies
(at least 1) on success or 0 on timeout, but never negative
error codes. The current code incorrectly checks for negative
values, causing timeouts to be ignored and treated as success.
Check for a zero return value to correctly identify and
handle timeout events.
Fixes: 0cf7befa3e ("greybus: gb-beagleplay: Add firmware upload API")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251121064027.571-1-vulab@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73b97d46dd ]
memset_io() writes memory byte by byte with __raw_writeb() on the arm
platform if the size is word. but XCVR data RAM memory can't be accessed
with byte address, so with memset_io() the channel status control memory
is not really cleared, use writel_relaxed() instead.
Fixes: 2856448686 ("ASoC: fsl_xcvr: Add XCVR ASoC CPU DAI driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20251126064509.1900974-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c5f4a5347 ]
Function new_inode() returns a new inode with inode->i_mapping->gfp_mask
set to GFP_HIGHUSER_MOVABLE. This value includes the __GFP_FS flag, so
allocations in that address space can recurse into filesystem memory
reclaim. We don't want that to happen because it can consume a
significant amount of stack memory.
Worse than that is that it can also deadlock: for example, in several
places, gfs2_unstuff_dinode() is called inside filesystem transactions.
This calls filemap_grab_folio(), which can allocate a new folio, which
can trigger memory reclaim. If memory reclaim recurses into the
filesystem and starts another transaction, a deadlock will ensue.
To fix these kinds of problems, prevent memory reclaim from recursing
into filesystem code by making sure that the gfp_mask of inode address
spaces doesn't include __GFP_FS.
The "meta" and resource group address spaces were already using GFP_NOFS
as their gfp_mask (which doesn't include __GFP_FS). The default value
of GFP_HIGHUSER_MOVABLE is less restrictive than GFP_NOFS, though. To
avoid being overly limiting, use the default value and only knock off
the __GFP_FS flag. I'm not sure if this will actually make a
difference, but it also shouldn't hurt.
This patch is loosely based on commit ad22c7a043 ("xfs: prevent stack
overflows from page cache allocation").
Fixes xfstest generic/273.
Fixes: dc0b943523 ("gfs: Don't use GFP_NOFS in gfs2_unstuff_dinode")
Reviewed-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4d072c98e ]
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20251126091759.2490019-2-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: cd41d3420e ("ASoC: nau8325: add missing build config")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce04ec03a9 ]
The kernel BOs unnecessarily got added to the external objects list
of drm_gpuvm, when mapping to GPU, which would have resulted in few
extra CPU cycles being spent at the time of job submission as
drm_exec_until_all_locked() loop iterates over all external objects.
Kernel BOs are private to a VM and so they share the dma_resv object of
the dummy GEM object created for a VM. Use of DRM_EXEC_IGNORE_DUPLICATES
flag ensured the recursive locking of the dummy GEM object was ignored.
Also no extra space got allocated to add fences to the dma_resv object
of dummy GEM object. So no other impact apart from few extra CPU cycles.
This commit sets the pointer to dma_resv object of GEM object of
kernel BOs before they are mapped to GPU, to prevent them from
being added to external objects list.
v2: Add R-bs and fixes tags
Fixes: 8a1cc07578 ("drm/panthor: Add GEM logical block")
Signed-off-by: Akash Goel <akash.goel@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251120172118.2741724-1-akash.goel@arm.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71d3bdae5e ]
The HW disables bounds checking for MRs with a length of zero, so
the driver will only allow a zero length MR if the "all_memory"
flag is set, and this flag is only set if IB_PD_UNSAFE_GLOBAL_RKEY
is set for the PD.
This means that the "get_dma_mr" method will currently fail unless
the IB_PD_UNSAFE_GLOBAL_RKEY flag is set. This has not been an issue
because the "get_dma_mr" method is only ever invoked if the device
does not support the local DMA key or if IB_PD_UNSAFE_GLOBAL_RKEY
is set, and so far, all IRDMA HW supports the local DMA lkey.
However, some new HW does not support the local DMA lkey, so the
"get_dma_mr" method needs to work without IB_PD_UNSAFE_GLOBAL_RKEY
being set.
To support HW that does not allow the local DMA lkey, the logic has
been changed to pass an explicit flag to indicate when a dma_mr is
being created so that the zero length will be allowed.
Also, the "all_memory" flag has been forced to false for normal MR
allocation since these MRs are never supposed to provide global
unsafe rkey semantics anyway; only the MR created with "get_dma_mr"
should support this.
Fixes: bb6d73d9ad ("RDMA/irdma: Prevent zero-length STAG registration")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20251125025350.180-7-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5583a55e07 ]
Some platforms (e.g. SC8280XP and X1E) support more than 128 stream
matching groups. This is more than what is defined as maximum by the ARM
SMMU architecture specification. Commit 1226113473 ("iommu/arm-smmu-qcom:
Limit the SMR groups to 128") disabled use of the additional groups because
they don't exhibit the same behavior as the architecture supported ones.
It seems like this is just another quirk of the hypervisor: When running
bare-metal without the hypervisor, the additional groups appear to behave
just like all others. The boot firmware uses some of the additional groups,
so ignoring them in this situation leads to stream match conflicts whenever
we allocate a new SMR group for the same SID.
The workaround exists primarily because the bypass quirk detection fails
when using a S2CR register from the additional matching groups, so let's
perform the test with the last reliable S2CR (127) and then limit the
number of SMR groups only if we detect that we are running below the
hypervisor (because of the bypass quirk).
Fixes: 1226113473 ("iommu/arm-smmu-qcom: Limit the SMR groups to 128")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d45db6326 ]
Add a missing struct short description and a missing leading " *" to
lp855x.h to avoid kernel-doc warnings:
Warning: include/linux/platform_data/lp855x.h:126 missing initial short
description on line:
* struct lp855x_platform_data
Warning: include/linux/platform_data/lp855x.h:131 bad line:
Only valid when mode is PWM_BASED.
Fixes: 7be865ab86 ("backlight: new backlight driver for LP855x devices")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20251111060916.1995920-1-rdunlap@infradead.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9341d6698f ]
LED Backlight is a consumer of one or multiple LED class devices, but
devlink is currently unable to create correct supplier-producer links when
the supplier is a class device. It creates instead a link where the
supplier is the parent of the expected device.
One consequence is that removal order is not correctly enforced.
Issues happen for example with the following sections in a device tree
overlay:
// An LED driver chip
pca9632@62 {
compatible = "nxp,pca9632";
reg = <0x62>;
// ...
addon_led_pwm: led-pwm@3 {
reg = <3>;
label = "addon:led:pwm";
};
};
backlight-addon {
compatible = "led-backlight";
leds = <&addon_led_pwm>;
brightness-levels = <255>;
default-brightness-level = <255>;
};
In this example, the devlink should be created between the backlight-addon
(consumer) and the pca9632@62 (supplier). Instead it is created between the
backlight-addon (consumer) and the parent of the pca9632@62, which is
typically the I2C bus adapter.
On removal of the above overlay, the LED driver can be removed before the
backlight device, resulting in:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
...
Call trace:
led_put+0xe0/0x140
devm_led_release+0x6c/0x98
Another way to reproduce the bug without any device tree overlays is
unbinding the LED class device (pca9632@62) before unbinding the consumer
(backlight-addon):
echo 11-0062 >/sys/bus/i2c/drivers/leds-pca963x/unbind
echo ...backlight-dock >/sys/bus/platform/drivers/led-backlight/unbind
Fix by adding a devlink between the consuming led-backlight device and the
supplying LED device, as other drivers and subsystems do as well.
Fixes: ae232e45ac ("backlight: add led-backlight driver")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://patch.msgid.link/20250519-led-backlight-add-devlink-to-supplier-class-device-v6-1-845224aeb2ce@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yu Kuai
Alexandru Gagniuc
Ivan Stepchenko
Hangbin Liu
Etienne Champetier
Robert Marko
Alex Williamson
Tianchu Chen
Haotian Zhang
Alexey Kodanev
Fernando Fernandez Mancera
Pablo Neira Ayuso
Ilias Stamatis
Andy Shevchenko
sparkhuang
Marek Szyprowski
Mikhail Kshevetskiy
Cezary Rojewski
Alok Tiwari
Mike Christie
Michael S. Tsirkin
Guenter Roeck
Yongjian Sun
Kevin Brodsky
René Rebe
Dan Carpenter
Alexandre Courbot
Shengjiu Wang
Andreas Gruenbacher
Jaroslav Kysela
Akash Goel
Jacob Moroni
Krzysztof Czurylo
Stephan Gerhold
Randy Dunlap
Luca Ceresoli