Drivers having a struct drm_bridge pointer pointing to a bridge in many
cases hold that reference until the owning device is removed. In those
cases the reference to the bridge can be put in the .remove callback
(possibly using devm actions) or in the .destroy func (possibly with the
help of struct drm_bridge::next_bridge). At those moments the driver should
not be operating anymore and won't dereference the bridge pointer after it
is put.
However there are cases when drivers need to stop holding a reference to a
bridge even when their device is not being removed. This is the case for
bridge hot-unplug, when a bridge is removed but the previous entity (bridge
or encoder) is staying. In such case the "previous entity" needs to put it
but cannot do it via devm or .destroy, because it is not being removed.
The easy way to dispose of such pointer is:
drm_bridge_put(my_priv->some_bridge);
my_priv->some_bridge = NULL;
However this is risky because there is a time window between the two lines
where the reference is put, and thus the bridge could be deallocated, but
the pointer is still assigned. If other functions of the same driver were
invoked concurrently they might dereference my_priv->some_bridge during
that window, resulting in use-after-free.
A correct solution is to clear the pointer before putting the reference,
but that needs a temporary variable:
struct drm_bridge *temp = my_priv->some_bridge;
my_priv->some_bridge = NULL;
drm_bridge_put(temp);
This solution is however annoying to write, so the incorrect version might
still sneak in.
Add a simple, easy to use function to put a bridge after setting its
pointer to NULL in the correct way.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260310-drm-bridge-atomic-vs-remove-clear_and_put-v2-1-51fe222f3cf0@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Replace full device recovery on TDR timeout with per-context abort,
allowing individual context handling instead of resetting the entire
device.
Extend ivpu_jsm_reset_engine() to return the list of contexts impacted
by the engine reset and use that information to abort only the affected
contexts.
Only check for potentially faulty contexts when the engine reset was not
triggered by an MMU fault or a job completion error status. This prevents
misidentifying non-guilty contexts that happened to be running at the
time of the fault.
Trigger full device recovery if no contexts were marked by engine reset
if triggered by job completion timeout, as there is no way to identify
guilty one.
Add engine reset counter to debugfs for engine resets bookkeeping
for debugging/testing purposes.
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20260318093927.4080303-1-karol.wachowski@linux.intel.com
Make use of the BACKGROUND_COLOR CRTC property when filling the
background during blending. It already defaults to solid black.
Since the internal representation of the pixel color in VKMS relies on
16 bits of precision, use the newly introduced DRM_ARGB64_GET{R|G|B}()
helpers to access the individual components of the background color
property, which is compliant with DRM_FORMAT_ARGB16161616.
It's worth noting the alpha component is ignored, hence non-opaque
background colors are not supported.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260303-rk3588-bgcolor-v8-3-fee377037ad1@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Some display controllers can be hardware programmed to show non-black
colors for pixels that are either not covered by any plane or are
exposed through transparent regions of higher planes. This feature can
help reduce memory bandwidth usage, e.g. in compositors managing a UI
with a solid background color while using smaller planes to render the
remaining content.
To support this capability, introduce the BACKGROUND_COLOR standard DRM
mode property, which can be attached to a CRTC through the
drm_crtc_attach_background_color_property() helper function.
Additionally, define a 64-bit ARGB format value to be built with the
help of a couple of dedicated DRM_ARGB64_PREP*() helpers. Individual
color components can be extracted with desired precision using the
corresponding DRM_ARGB64_GET*() macros.
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260303-rk3588-bgcolor-v8-2-fee377037ad1@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
The firmware implements the GET_APP_HEALTH command to collect debug
information for a specific hardware context.
When a command times out, the driver issues this command to collect the
relevant debug information. User space tools can also retrieve this
information through the hardware context query IOCTL.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260317044906.1513133-1-lizhi.hou@amd.com
The tilcdc_panel driver was removed by commit 8f1e1ab9c7 ("drm/tilcdc:
Remove tilcdc panel driver"), but was inadvertently reintroduced by the
merge commit 8b85987d3c ("Merge drm/drm-next into drm-misc-next").
The regression went unnoticed because standard git commands such as
'git show' do not expose the change. It was only spotted via
'git show --stat':
git show --stat 8b85987d3c | grep tilcdc
drivers/gpu/drm/tilcdc/tilcdc_panel.c | 408 +
git show 8b85987d3c | grep tilcdc
(no output)
Remove tilcdc_panel.c again to restore the previously intended state.
Fixes: 8b85987d3c ("Merge drm/drm-next into drm-misc-next")
Signed-off-by: Kory Maincent (TI) <kory.maincent@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260305155921.659550-1-kory.maincent@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
When drm_atomic_add_affected_planes() adds a plane to the atomic
state, the associated colorops are not guaranteed to be included.
This can leave colorop state out of the transaction when planes
are pulled in implicitly (eg. during modeset or internal commits).
Also add affected colorops when adding affected planes to keep
plane and color pipeline state consistent within the atomic
transaction.
v2: Add affected colorops only when a pipeline is enabled
Fixes: 2afc3184f3 ("drm/plane: Add COLOR PIPELINE property")
Cc: <stable@vger.kernel.org> #v6.19+
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v1
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260310113238.3495981-3-chaitanya.kumar.borah@intel.com
__drm_atomic_helper_colorop_duplicate_state() unconditionally
sets state->bypass = true after copying the existing state.
This override causes the new atomic state to no longer reflect
the currently committed hardware state. Since the bypass property
directly controls whether the colorop is active in hardware,
resetting it to true can inadvertently disable an active colorop
during a subsequent commit, particularly for internal driver commits
where userspace does not touch the property.
Drop the unconditional assignment and preserve the duplicated
bypass value.
Fixes: 8c5ea1745f ("drm/colorop: Add BYPASS property")
Cc: <stable@vger.kernel.org> #v6.19+
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260310113238.3495981-2-chaitanya.kumar.borah@intel.com
Commit 4636ce93d5 ("drm/fb-cma-helper: Add drm_fb_cma_get_gem_addr()")
adds a new helper, which covers fetching a drm_framebuffer's GEM object
and calculating the buffer address for a given plane.
This patch uses this helper to replace our own open coded version of the
same function.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260309165635.1138413-1-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Commit adefb2ccea ("drm/v3d: create a dedicated lock for dma fence")
split `fence_lock` from `queue_lock` because v3d_job_update_stats() was
taking `queue_lock` to protect `job->file_priv` during stats collection
in the IRQ handler. Using the same lock for both DMA fence signaling and
stats protection in a IRQ context caused issues on PREEMPT_RT.
Since then, the stats infrastructure has been reworked: v3d_stats is now
refcounted and jobs hold their own references to stats objects, so
v3d_job_update_stats() no longer takes `queue_lock` at all.
With the original reason for the split gone, merge `fence_lock` back
into `queue_lock` to simplify the locking scheme.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260306-v3d-reset-locking-improv-v3-6-49864fe00692@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
To remove the file_priv NULL-ing dance needed to check if the file
descriptor is open, move the per-fd reset counter into v3d_stats, which
is heap-allocated and refcounted, outliving the fd as long as jobs
reference it.
This change allows the removal of the last `queue_lock` usage to protect
`job->file_priv` and avoids possible NULL ptr dereference issues due to
lifetime mismatches.
Also, to simplify locking, replace both the global and per-fd locked
reset counters with atomics.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260306-v3d-reset-locking-improv-v3-5-49864fe00692@igalia.com
Co-developed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
The `v3d_stats` sequence counter uses regular seqcount helpers, which
carry lockdep annotations that expect a consistent IRQ context between
all writers. However, lockdep is unable to detect that v3d's readers
are never in IRQ or softirq context, and that for CPU job queues, even
the write side never is. This led to false positive that were previously
worked around by conditionally disabling local IRQs under
IS_ENABLED(CONFIG_LOCKDEP).
Switch to the raw seqcount helpers which skip lockdep tracking entirely.
This is safe because jobs are fully serialized per queue: the next job
can only be queued after the previous one has been signaled, so there is
no scope for the start and update paths to race on the same seqcount.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260306-v3d-reset-locking-improv-v3-2-49864fe00692@igalia.com
Co-developed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
The colorop state blob property handling had memory leaks during state
duplication, destruction, and reset operations. The implementation
failed to follow the established pattern from drm_crtc's handling of
DEGAMMA/GAMMA blob properties.
Issues fixed:
- drm_colorop_atomic_destroy_state() was freeing state memory without
releasing the blob reference, causing a leak
- drm_colorop_reset() was directly freeing old state with kfree()
instead of properly destroying it, leaking blob references
- drm_colorop_cleanup() had duplicate blob cleanup code
Changes:
- Add __drm_atomic_helper_colorop_destroy_state() helper to properly
release blob references before freeing state memory
- Update drm_colorop_atomic_destroy_state() to call the helper
- Fix drm_colorop_reset() to use drm_colorop_atomic_destroy_state()
for proper cleanup of old state
- Simplify drm_colorop_cleanup() to use the common destruction path
This matches the well-tested pattern used by drm_crtc since 2016 and
ensures proper reference counting throughout the state lifecycle.
Co-developed by Claude Sonnet 4.5.
Fixes: cfc27680ee ("drm/colorop: Introduce new drm_colorop mode object")
Cc: Simon Ser <contact@emersion.fr>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Melissa Wen <mwen@igalia.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Louis Chauvet <louis.chauvet@bootlin.com>
Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: <stable@vger.kernel.org> #v6.19+
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Link: https://patch.msgid.link/20260312204145.829714-1-harry.wentland@amd.com
Convert the driver to use the non-deprecated mipi_dsi_*_multi() helpers and
mipi_dsi_msleep().
Switch DCS command sequences to the multi context API and
accumulate errors via struct mipi_dsi_multi_context. Replace
open-coded error handling with the multi helpers and convert
nt36672a_send_cmds() and power sequencing accordingly.
This patch is intended to functionally be a no-op, though there is one
slight change. Previously a failure in regulator_bulk_disable() would
have caused nt36672a_panel_unprepare() to return an error. Now it
won't. No other errors in nt36672a_panel_unprepare() were propagated,
so this makes things consistent.
Signed-off-by: Chintan Patel <chintanlike@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260305044921.10942-1-chintanlike@gmail.com
The IPUv3 overlay plane may be placed over or under the primary plane.
Set the zpos of the primary to an immutable position of 1 to have the
possibility to place the other plane underneath it.
Set the zpos of other planes (the overlay plane) to a mutable value
between 0 (the lowest possible value of a zpos) and directly above the
primary plane with the latter being the default.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patch.msgid.link/20260219-drm-imx-underlay-plane-v2-2-26ef829c5483@pengutronix.de
Prefer bus format set via legacy "interface-pix-fmt" DT property
over panel bus format. This is necessary to retain support for
DTs which configure the IPUv3 parallel output as 24bit DPI, but
connect 18bit DPI panels to it with hardware swizzling.
This used to work up to Linux 6.12, but stopped working in 6.13,
reinstate the behavior to support old DTs.
Cc: stable@vger.kernel.org
Fixes: 5f6e56d331 ("drm/imx: parallel-display: switch to drm_panel_bridge")
Signed-off-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patch.msgid.link/20260110171510.692666-1-marex@nabladev.com
The amdxdna driver normally performs DMA using userspace virtual address
plus PASID. For debugging and validation purposes, add a module parameter,
force_iova, to force DMA to go through IOMMU IOVA mapping.
When force_iova=1 is set, the driver will allocate and map DMA buffers
using IOVA.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260126193001.1400545-1-lizhi.hou@amd.com
Currently, ttm_bo_swapout is not exercised by the TTM KUnit tests.
It used to be exercised until commit 76689eb526 ("drm/ttm: remove
ttm_bo_validate_swapout test"), but that test was removed as it was
unreliable due to requiring to allocate half of the system memory.
Calling ttm_bo_swapout directly with a single allocated BO, however, does
not suffer from that problem, and was able to detect a UAF introduced by
commit c06da4b357 ("drm/ttm: Tidy usage of local variables a little
bit"), when built with KASAN.
When applying a fix to that UAF, the test passed without any issues.
Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260309-ttm_bo_swapout_test-v2-1-219f64046cfe@igalia.com
The AMD PMF driver provides realtime column utilization (npu_busy)
metrics for the NPU. Extend the DRM_IOCTL_AMDXDNA_GET_INFO sensor
query to expose these metrics to userspace.
Add AMDXDNA_SENSOR_TYPE_COLUMN_UTILIZATION to the sensor type enum
and update aie2_get_sensors() to return both the total power and up
to 8 column utilization sensors if the user buffer permits.
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
[lizhi: support legacy tool which uses small buffer. checkpatch cleanup]
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260311171842.473453-1-lizhi.hou@amd.com
The AMD PMF driver provides an interface to obtain realtime power
estimates for the NPU. Expose this information to userspace through a
new DRM_IOCTL_AMDXDNA_GET_INFO parameter, allowing applications to query
the current NPU power level.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
(Update comment to indicate power and utilization)
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260228061109.361239-2-superm1@kernel.org
Requested by Maxime Ripard for drm-misc-next because renesas people need
fb797a7010 ("drm: renesas: rz-du: mipi_dsi: Set DSI divider").
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Luca Ceresoli
Thomas Hellström
Maxime Ripard
Karol Wachowski
Alvin1 Chen
Cristian Ciocaltea
Lizhi Hou
Ethan Tidmore
Kory Maincent (TI)
Chaitanya Kumar Borah
Chen-Yu Tsai
Vishnu Saini
Maíra Canal
Tvrtko Ursulin
Harry Wentland
Chintan Patel
Michael Tretter
Martin Kepplinger-Novakovic
Marek Vasut
Geert Uytterhoeven
Thadeu Lima de Souza Cascardo
Mario Limonciello (AMD)
Simona Vetter
Linus Walleij