[ Upstream commit a078484921 ]
fuse_try_move_folio() unlocks the request on entry but does not
re-lock it on the success path. This means fuse_chan_abort() can end the
request and free the fuse_io_args (eg fuse_readpages_end()) while the
subsequent copy chain logic after fuse_try_move_folio() accesses the
fuse_io_args, leading to use-after-free issues.
Fix this by calling lock_request() before replace_page_cache_folio().
This ensures the request is locked on the success path which will
prevent the fuse_io_args from being freed while the later copying logic
runs, and also ensures that the ap->folios[i]->mapping is never null
since ap->folios[i] will always point to the newfolio after
replace_page_cache_folio().
Fixes: ce534fb052 ("fuse: allow splice to move pages")
Cc: stable@vger.kernel.org
Reported-by: Lei Lu <llfamsec@gmail.com>
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 71de0177b2 ]
phonet_device_destroy() removes a phonet_device from the per-net device
list with list_del_rcu(), but frees it immediately. RCU readers walking
the same list can still hold a pointer to the object after it has been
removed, leading to a slab-use-after-free.
Use kfree_rcu(), matching the lifetime rule already used by
phonet_address_del() for the same object type.
Fixes: eeb74a9d45 ("Phonet: convert devices list to RCU")
Cc: stable@vger.kernel.org
Signed-off-by: Santosh Kalluri <santosh.kalluri129@gmail.com>
Acked-by: Rémi Denis-Courmont <remi@remlab.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 68ed5c38b5 ]
Currently, phonet_address_notify() fetches netns and ifindex from dev.
Once addr_doit() is converted to RCU, phonet_address_notify() will be
called outside of RCU due to GFP_KERNEL, and dev will be unavailable
there.
Let's pass net and ifindex to phonet_address_notify().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 71de0177b2 ("net: phonet: free phonet_device after RCU grace period")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 08a9572be3 ]
We will convert addr_doit() and getaddr_dumpit() to RCU, both
of which call fill_addr().
The former will call phonet_address_notify() outside of RCU
due to GFP_KERNEL, so dev will not be available in fill_addr().
Let's pass ifindex directly to fill_addr().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 71de0177b2 ("net: phonet: free phonet_device after RCU grace period")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 40a25d59e8 ]
syzbot triggered the following splat in remove_waiter() via
FUTEX_CMP_REQUEUE_PI:
KASAN: null-ptr-deref in range [0x0000000000000a88-0x0000000000000a8f]
class_raw_spinlock_constructor
remove_waiter+0x159/0x1200 kernel/locking/rtmutex.c:1561
rt_mutex_start_proxy_lock+0x103/0x120
futex_requeue+0x10e4/0x20d0
__x64_sys_futex+0x34f/0x4d0
task_blocks_on_rt_mutex() does not arm the waiter upon deadlock detection,
leaving waiter->task nil, where 3bfdc63936 ("rtmutex: Use waiter::task instead
of current in remove_waiter()") made this fatal.
Furthermore, rt_mutex_start_proxy_lock() should not be calling into remove_waiter()
upon a successfully grabbing the rtmutex. 1a1fb985f2 ("futex: Handle early deadlock
return correctly"), moved the remove_waiter() out of __rt_mutex_start_proxy_lock()
(where 'ret' was only ever 0 or < 0) into the wrapper. Tighten this check to
account for try_to_take_rt_mutex().
Fixes: 3bfdc63936 ("rtmutex: Use waiter::task instead of current in remove_waiter()")
Reported-by: syzbot+78147abe6c524f183ee9@syzkaller.appspotmail.com
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/69f114ac.050a0220.ac8b.0003.GAE@google.com/
Link: https://patch.msgid.link/20260507112913.1019537-1-dave@stgolabs.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 016a25e4b0 ]
If vmbus_reserve_fb() in the kdump/kexec kernel fails to properly reserve
the framebuffer MMIO range (which is below 4GB) due to a Gen2 VM's
screen.lfb_base being zero [1], there is an MMIO conflict between the
drivers hyperv-drm and pci-hyperv: when the driver pci-hyperv's
hv_allocate_config_window() calls vmbus_allocate_mmio() to get an
MMIO range, typically it gets a 32-bit MMIO range that overlaps with the
framebuffer MMIO range, and later hv_pci_enter_d0() fails with an
error message "PCI Pass-through VSP failed D0 Entry with status" since
the host thinks that PCI devices must not use MMIO space that the
host has assigned to the framebuffer.
This is especially an issue if pci-hyperv is built-in and hyperv-drm is
built as a module. Consequently, the kdump/kexec kernel fails to detect
PCI devices via pci-hyperv, and may fail to mount the root file system,
which may reside in a NVMe disk. The issue described here has existed
for SR-IOV VF NICs since day one of the pci-hyperv driver, and has been
worked around on x64 when possible. With the recent introduction of
ARM64 VMs that boot from NVMe, there is no workaround, so we need a
formal fix.
On Gen2 VMs, if the screen.lfb_base is 0 in the kdump/kexec kernel [1],
fall back to the low MMIO base, which should be equal to the framebuffer
MMIO base [2] (the statement is true according to my testing on x64
Windows Server 2016, and on x64 and ARM64 Windows Server 2025 and on
Azure. I checked with the Hyper-V team and they said the statement should
continue to be true for Gen2 VMs). In the first kernel, screen.lfb_base
is not 0; if the user specifies a very high resolution, it's not enough
to only reserve 8MB: let's always reserve half of the space below 4GB,
but cap the reservation to 128MB, which is the required framebuffer size
of the highest resolution 7680*4320 supported by Hyper-V.
While at it, fix the comparison "end > VTPM_BASE_ADDRESS" by changing
the > to >=. Here the 'end' is an inclusive end (typically, it's
0xFFFF_FFFF for the low MMIO range).
Note: vmbus_reserve_fb() now also reserves an MMIO range at the beginning
of the low MMIO range on CVMs, which have no framebuffers (the
'screen.lfb_base' in vmbus_reserve_fb() is 0 for CVMs), just in case the
host might treat the beginning of the low MMIO range specially [3]. BTW,
the OpenHCL kernel is not affected by the change, because that kernel
boots with DeviceTree rather than ACPI (so vmbus_reserve_fb() won't run
there), and there is no framebuffer device for that kernel.
Note: normally Gen1 VMs don't have the MMIO conflict issue because the
framebuffer MMIO range (which is hardcoded to base=4GB-128MB and
size=64MB for Gen1 VMs by the host) is always reported via the legacy PCI
graphics device's BAR, so the kdump/kexec kernel can reserve the 64MB
MMIO range; however, if the VM is configured to use a very high resolution
and the required framebuffer size exceeds 64MB (AFAIK, in practice, this
isn't a typical configuration by users), the hyperv-drm driver may need to
allocate an MMIO range above 4GB and change the framebuffer MMIO location
to the allocated MMIO range -- in this case, there can still be issues [4]
which can't be easily fixed: any possible affected Gen1 users would have
to use a resolution whose framebuffer size is <= 64MB, or switch to Gen2
VMs.
[1] https://lore.kernel.org/all/SA1PR21MB692176C1BC53BFC9EAE5CF8EBF51A@SA1PR21MB6921.namprd21.prod.outlook.com/
[2] https://lore.kernel.org/all/SA1PR21MB69218F955B62DFF62E3E88D2BF222@SA1PR21MB6921.namprd21.prod.outlook.com/
[3] https://lore.kernel.org/all/SN6PR02MB415726B17D5A6027CD1717E8D4342@SN6PR02MB4157.namprd02.prod.outlook.com/
[4] https://lore.kernel.org/all/SA1PR21MB69213486F821CA5A2C793C81BF342@SA1PR21MB6921.namprd21.prod.outlook.com/
Fixes: 4daace0d8c ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
CC: stable@vger.kernel.org
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Matthew Ruffell <matthew.ruffell@canonical.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
[ changed `sysfb_primary_display.screen.lfb_base/lfb_size` reads to the global `screen_info.lfb_base/lfb_size` and dropped the `if (IS_ENABLED(CONFIG_SYSFB))` wrapper, de-indenting the block. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3fcf923302 ]
Make kvp_register() return an error code instead of silently ignoring
failures, and propagate the error from kvp_handle_handshake() instead of
returning success.
This propagates both kzalloc_obj() and hvutil_transport_send() failures
to kvp_handle_handshake() and thus to kvp_on_msg().
Fixes: 245ba56a52 ("Staging: hv: Implement key/value pair (KVP)")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 14e9fea30b ]
The userspace PM increments extra_subflows after __mptcp_subflow_connect()
succeeds, but __mptcp_subflow_connect() calls mptcp_pm_close_subflow()
on failure to roll back the pre-increment done by the kernel PM's fill_*()
helpers. Because the userspace PM hasn't incremented yet at that point,
this decrement is spurious and causes extra_subflows to underflow.
Fix it by aligning the userspace PM with the kernel PM: increment
extra_subflows before calling __mptcp_subflow_connect(), so the existing
error path in subflow.c correctly rolls it back on failure. Also simplify
the error handling by taking pm.lock only when needed for cleanup.
Fixes: 77e4b94a3d ("mptcp: update userspace pm infos")
Cc: stable@vger.kernel.org
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-5-856831229976@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7cb9a23d7a upstream.
During transaction processing we might have more than one catchall element:
1 live catchall element and 1 pending element that is coming as part of the
new batch.
If the map holding the catchall elements is also going away, its
required to toggle all catchall elements and not just the first viable
candidate.
Otherwise, we get:
WARNING: ./include/net/netfilter/nf_tables.h:1281 at nft_data_release+0xb7/0xe0 [nf_tables], CPU#2: nft/1404
RIP: 0010:nft_data_release+0xb7/0xe0 [nf_tables]
[..]
__nft_set_elem_destroy+0x106/0x380 [nf_tables]
nf_tables_abort_release+0x348/0x8d0 [nf_tables]
nf_tables_abort+0xcf2/0x3ac0 [nf_tables]
nfnetlink_rcv_batch+0x9c9/0x20e0 [..]
Fixes: 628bd3e49c ("netfilter: nf_tables: drop map element references from preparation phase")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
[ Shivani: Modified to apply on v6.6.y-v6.1.y ]
Signed-off-by: Shivani Agarwal <shivani.agarwal@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e2bad543e upstream.
do_uevent returns the value written to event_done. In case it is a
positive value, new_lockspace would undo all the work, and lockspace
would not be set. __dlm_new_lockspace, however, would treat that
positive value as a success due to commit 8511a2728a ("dlm: fix use
count with multiple joins").
Down the line, device_create_lockspace would pass that NULL lockspace to
dlm_find_lockspace_local, leading to a NULL pointer dereference.
Treating such positive values as successes prevents the problem. Given
this has been broken for so long, this is unlikely to break userspace
expectations.
Fixes: 8511a2728a ("dlm: fix use count with multiple joins")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Nazar Kalashnikov <nazarkalashnikov0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 497330b203 upstream.
If late enabling of a supply regulator fails in
regulator_resolve_supply(), the code currently triggers a lockdep
warning:
WARNING: drivers/regulator/core.c:2649 at _regulator_put+0x80/0xa0, CPU#6: kworker/u32:4/596
...
Call trace:
_regulator_put+0x80/0xa0 (P)
regulator_resolve_supply+0x7cc/0xbe0
regulator_register_resolve_supply+0x28/0xb8
as the regulator_list_mutex must be held when calling _regulator_put().
To solve this, simply switch to using regulator_put().
While at it, we should also make sure that no concurrent access happens
to our rdev while we clear out the supply pointer. Add appropriate
locking to ensure that.
While the code in question will be removed altogether in a follow-up
commit, I believe it is still beneficial to have this corrected before
removal for future reference.
Fixes: 36a1f1b6dd ("regulator: core: Fix memory leak in regulator_resolve_supply()")
Fixes: 8e5356a736 ("regulator: core: Clear the supply pointer if enabling fails")
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260109-regulators-defer-v2-2-1a25dc968e60@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Nazar Kalashnikov <nazarkalashnikov0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 119a5d5736 ]
When the ring buffer was first introduced, reading the non-consuming
"trace" file required disabling the writing of the ring buffer. To make
sure the writing was fully disabled before iterating the buffer with a
non-consuming read, it would set the disable flag of the buffer and then
call an RCU synchronization to make sure all the buffers were
synchronized.
The function ring_buffer_read_start() originally would initialize the
iterator and call an RCU synchronization, but this was for each individual
per CPU buffer where this would get called many times on a machine with
many CPUs before the trace file could be read. The commit 72c9ddfd4c
("ring-buffer: Make non-consuming read less expensive with lots of cpus.")
separated ring_buffer_read_start into ring_buffer_read_prepare(),
ring_buffer_read_sync() and then ring_buffer_read_start() to allow each of
the per CPU buffers to be prepared, call the read_buffer_read_sync() once,
and then the ring_buffer_read_start() for each of the CPUs which made
things much faster.
The commit 1039221cc2 ("ring-buffer: Do not disable recording when there
is an iterator") removed the requirement of disabling the recording of the
ring buffer in order to iterate it, but it did not remove the
synchronization that was happening that was required to wait for all the
buffers to have no more writers. It's now OK for the buffers to have
writers and no synchronization is needed.
Remove the synchronization and put back the interface for the ring buffer
iterator back before commit 72c9ddfd4c was applied.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250630180440.3eabb514@batman.local.home
Reported-by: David Howells <dhowells@redhat.com>
Fixes: 1039221cc2 ("ring-buffer: Do not disable recording when there is an iterator")
Tested-by: David Howells <dhowells@redhat.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Assisted-by: Kiro:claude-opus-4.8
Signed-off-by: Bjoern Doebel <doebel@amazon.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bebc17b1c0 ]
Add a few test cases to verify precision tracking for scalars gaining
range because of sync_linked_regs():
- check what happens when more than 6 registers might gain range in
sync_linked_regs();
- check if precision is propagated correctly when operand of
conditional jump gained range in sync_linked_regs() and one of
linked registers is marked precise;
- check if precision is propagated correctly when operand of
conditional jump gained range in sync_linked_regs() and a
other-linked operand of the conditional jump is marked precise;
- add a minimized reproducer for precision tracking bug reported in [0];
- Check that mark_chain_precision() for one of the conditional jump
operands does not trigger equal scalars precision propagation.
[0] https://lore.kernel.org/bpf/CAEf4BzZ0xidVCqB47XnkXcNhkPWF6_nTV7yt+_Lf0kcFEut2Mg@mail.gmail.com/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240718202357.1746514-4-eddyz87@gmail.com
[ zhenzhong: keep the linked_regs_broken_link_2 reject check, but
drop the mark_precise log expectations because 6.6.y does not derive
the scalar-vs-scalar range for that non-constant JMP_X comparison. ]
Signed-off-by: Zhenzhong Wu <jt26wzz@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 842edb5507 ]
Function mark_precise_scalar_ids() is superseded by
bt_sync_linked_regs() and equal scalars tracking in jump history.
mark_precise_scalar_ids() propagates precision over registers sharing
same ID on parent/child state boundaries, while jump history records
allow bt_sync_linked_regs() to propagate same information with
instruction level granularity, which is strictly more precise.
This commit removes mark_precise_scalar_ids() and updates test cases
in progs/verifier_scalar_ids to reflect new verifier behavior.
The tests are updated in the following manner:
- mark_precise_scalar_ids() propagated precision regardless of
presence of conditional jumps, while new jump history based logic
only kicks in when conditional jumps are present.
Hence test cases are augmented with conditional jumps to still
trigger precision propagation.
- As equal scalars tracking no longer relies on parent/child state
boundaries some test cases are no longer interesting,
such test cases are removed, namely:
- precision_same_state and precision_cross_state are superseded by
linked_regs_bpf_k;
- precision_same_state_broken_link and equal_scalars_broken_link
are superseded by linked_regs_broken_link.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240718202357.1746514-3-eddyz87@gmail.com
[ zhenzhong: backport to 6.6.y after adapting the first linked-regs
history commit to the older scalar-id verifier layout. ]
Signed-off-by: Zhenzhong Wu <jt26wzz@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4bf79f9be4 ]
Use bpf_verifier_state->jmp_history to track which registers were
updated by find_equal_scalars() (renamed to collect_linked_regs())
when conditional jump was verified. Use recorded information in
backtrack_insn() to propagate precision.
E.g. for the following program:
while verifying instructions
1: r1 = r0 |
2: if r1 < 8 goto ... | push r0,r1 as linked registers in jmp_history
3: if r0 > 16 goto ... | push r0,r1 as linked registers in jmp_history
4: r2 = r10 |
5: r2 += r0 v mark_chain_precision(r0)
while doing mark_chain_precision(r0)
5: r2 += r0 | mark r0 precise
4: r2 = r10 |
3: if r0 > 16 goto ... | mark r0,r1 as precise
2: if r1 < 8 goto ... | mark r0,r1 as precise
1: r1 = r0 v
Technically, do this as follows:
- Use 10 bits to identify each register that gains range because of
sync_linked_regs():
- 3 bits for frame number;
- 6 bits for register or stack slot number;
- 1 bit to indicate if register is spilled.
- Use u64 as a vector of 6 such records + 4 bits for vector length.
- Augment struct bpf_jmp_history_entry with a field 'linked_regs'
representing such vector.
- When doing check_cond_jmp_op() remember up to 6 registers that
gain range because of sync_linked_regs() in such a vector.
- Don't propagate range information and reset IDs for registers that
don't fit in 6-value vector.
- Push a pair {instruction index, linked registers vector}
to bpf_verifier_state->jmp_history.
- When doing backtrack_insn() check if any of recorded linked
registers is currently marked precise, if so mark all linked
registers as precise.
This also requires fixes for two test_verifier tests:
- precise: test 1
- precise: test 2
Both tests contain the following instruction sequence:
19: (bf) r2 = r9 ; R2=scalar(id=3) R9=scalar(id=3)
20: (a5) if r2 < 0x8 goto pc+1 ; R2=scalar(id=3,umin=8)
21: (95) exit
22: (07) r2 += 1 ; R2_w=scalar(id=3+1,...)
23: (bf) r1 = r10 ; R1_w=fp0 R10=fp0
24: (07) r1 += -8 ; R1_w=fp-8
25: (b7) r3 = 0 ; R3_w=0
26: (85) call bpf_probe_read_kernel#113
The call to bpf_probe_read_kernel() at (26) forces r2 to be precise.
Previously, this forced all registers with same id to become precise
immediately when mark_chain_precision() is called.
After this change, the precision is propagated to registers sharing
same id only when 'if' instruction is backtracked.
Hence verification log for both tests is changed:
regs=r2,r9 -> regs=r2 for instructions 25..20.
Fixes: 904e6ddf41 ("bpf: Use scalar ids in mark_chain_precision()")
Reported-by: Hao Sun <sunhao.th@gmail.com>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240718202357.1746514-2-eddyz87@gmail.com
Closes: https://lore.kernel.org/bpf/CAEf4BzZ0xidVCqB47XnkXcNhkPWF6_nTV7yt+_Lf0kcFEut2Mg@mail.gmail.com/
[ zhenzhong: backport to 6.6.y verifier layout and adapt
sync_linked_regs() to the pre-BPF_ADD_CONST scalar-id code. ]
Signed-off-by: Zhenzhong Wu <jt26wzz@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit eb7024bfcc upstream.
kprobe.multi programs run in atomic/RCU context and cannot sleep.
However, bpf_kprobe_multi_link_attach() did not validate whether the
program being attached had the sleepable flag set, allowing sleepable
helpers such as bpf_copy_from_user() to be invoked from a non-sleepable
context.
This causes a "sleeping function called from invalid context" splat:
BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:169
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1787, name: sudo
preempt_count: 1, expected: 0
RCU nest depth: 2, expected: 0
Fix this by rejecting sleepable programs early in
bpf_kprobe_multi_link_attach(), before any further processing.
Fixes: 0dcac27254 ("bpf: Add multi kprobe link")
Signed-off-by: Varun R Mallya <varunrmallya@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260401191126.440683-1-varunrmallya@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[shung-hsi.yu: sleepable flag was in 'struct bpf_prog_aux' before commit
66c8473135 "bpf: move sleepable flag from bpf_prog_aux to bpf_prog"]
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b08472db93 upstream.
A NULL pointer dereference was observed in the AMD64 AGP driver when
running in a virtualized environment (e.g. qemu/kvm) without a physical
AMD northbridge. The crash occurs in amd64_fetch_size() when attempting
to dereference the pointer returned by node_to_amd_nb(0).
The root cause of this crash is broken error propagation in
agp_amd64_probe(): When no AMD northbridges are found, cache_nbs()
correctly returns -ENODEV. However, the probe function erroneously
checks the return value against exactly -1, rather than < 0.
As a result, the hardware absence error is masked, allowing the driver
to improperly proceed with initialization. It eventually calls
agp_add_bridge(), which invokes amd64_fetch_size(). Since the hardware
does not exist, node_to_amd_nb(0) returns NULL, leading to a General
Protection Fault (GPF) when accessing its ->misc member.
Fix the issue by correcting the error check in agp_amd64_probe() to
abort properly when cache_nbs() returns any negative error code. This
prevents the driver from erroneously proceeding without hardware, thereby
avoiding the subsequent NULL pointer dereference at its source.
Fixes: a32073bffc ("[PATCH] x86_64: Clean and enhance up K8 northbridge access code")
Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v2.6.18+
Link: https://patch.msgid.link/20260504074823.99377-1-w15303746062@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d00c953a8f upstream.
rmnet_dellink() removes the endpoint from the hash table with
hlist_del_init_rcu() and then immediately frees it with kfree(). However,
RCU readers on the receive path (rmnet_rx_handler ->
__rmnet_map_ingress_handler) may still hold a reference to the endpoint and
dereference ep->egress_dev after the memory has been freed. The endpoint is
a kmalloc-32 object, and the stale read at offset 8 corresponds to the
egress_dev pointer.
BUG: unable to handle page fault for address: ffffffffde942eef
Oops: 0002 [#1] SMP NOPTI
CPU: 1 UID: 0 PID: 137 Comm: poc_write Not tainted 7.0.0+ #4 PREEMPTLAZY
RIP: 0010:rmnet_vnd_rx_fixup (rmnet_vnd.c:27)
Call Trace:
<TASK>
__rmnet_map_ingress_handler (rmnet_handlers.c:48 rmnet_handlers.c:101)
rmnet_rx_handler (rmnet_handlers.c:129 rmnet_handlers.c:235)
__netif_receive_skb_core.constprop.0 (net/core/dev.c:6096)
__netif_receive_skb_one_core (net/core/dev.c:6208)
netif_receive_skb (net/core/dev.c:6467)
tun_get_user (drivers/net/tun.c:1955)
tun_chr_write_iter (drivers/net/tun.c:2003)
vfs_write (fs/read_write.c:688)
ksys_write (fs/read_write.c:740)
</TASK>
Add an rcu_head field to struct rmnet_endpoint and replace kfree() with
kfree_rcu() so the endpoint memory remains valid through the RCU grace
period. Also remove the rmnet_vnd_dellink() call and inline only the
nr_rmnet_devs decrement, since rmnet_vnd_dellink() would set
ep->egress_dev to NULL during the grace period, creating a data race
with lockless readers.
Fixes: ceed73a2cf ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/20260514122511.3083479-2-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6036b5067a upstream.
The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0]
as the transfer length. The existing check only clamps it to avoid
overrunning the chip->words[256] register array, but does not validate
it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union
i2c_smbus_data.block buffer (34 bytes total). The driver is a
development/test tool (CONFIG_I2C_STUB=m, not built by default)
that must be loaded with a chip_addr= parameter.
A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl
with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing
stub_xfer() to read or write past the end of the union
i2c_smbus_data.block buffer:
BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223)
Read of size 1 at addr ffff88800abcfd92 by task exploit/81
Call Trace:
<TASK>
stub_xfer (drivers/i2c/i2c-stub.c:223)
__i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:593)
i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:536)
i2cdev_ioctl_smbus (drivers/i2c/i2c-dev.c:391)
i2cdev_ioctl (drivers/i2c/i2c-dev.c:478)
__x64_sys_ioctl (fs/ioctl.c:583)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
The bug exists because i2c-stub implements .smbus_xfer directly,
bypassing the I2C_SMBUS_BLOCK_MAX validation in
i2c_smbus_xfer_emulated(). The I2C_SMBUS_BLOCK_DATA case in the same
function correctly validates against I2C_SMBUS_BLOCK_MAX, but the
I2C_SMBUS_I2C_BLOCK_DATA case does not.
Fix by rejecting transfers with data->block[0] == 0 or
data->block[0] > I2C_SMBUS_BLOCK_MAX with -EINVAL, consistent with
both the I2C_SMBUS_BLOCK_DATA case in the same function and the
I2C_SMBUS_I2C_BLOCK_DATA validation in i2c_smbus_xfer_emulated().
Fixes: 4710317891 ("i2c-stub: Implement I2C block support")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6b079629b upstream.
bnxt_re_alloc_ucontext() allocates uctx->shpg via
__get_free_page(GFP_KERNEL). The buddy allocator does not zero pages
without __GFP_ZERO, so the page contains stale kernel data from
whatever object most recently freed it.
The page is then mapped into userspace via vm_insert_page() under
BNXT_RE_MMAP_SH_PAGE in bnxt_re_mmap(). The driver only ever writes
4 bytes (a u32 AVID) at offset BNXT_RE_AVID_OFFT (0x10) inside
bnxt_re_create_ah(); the remaining 4092 bytes of the page are exposed
to userspace unsanitised, leaking kernel memory contents.
Any user with access to /dev/infiniband/uverbsX on a host with a
bnxt_re device (typically rdma group membership) can read this data
via a single mmap() at pgoff 0 after IB_USER_VERBS_CMD_GET_CONTEXT.
Other shared pages in the same file already use get_zeroed_page()
correctly:
drivers/infiniband/hw/bnxt_re/ib_verbs.c
srq->uctx_srq_page = (void *)get_zeroed_page(GFP_KERNEL);
cq->uctx_cq_page = (void *)get_zeroed_page(GFP_KERNEL);
uctx->shpg is the only outlier. Bring it in line with the existing
convention by switching to get_zeroed_page().
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Lord Ulf Henrik Holmberg <henrik.holmberg@defensify.se>
Link: https://patch.msgid.link/20260509084011.11971-1-pomzm67@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b2849bec93 ]
The APICv (apic->apicv_active) can be activated or deactivated at runtime,
for instance, because of APICv inhibit reasons. Intel VMX employs different
mechanisms to virtualize LAPIC based on whether APICv is active.
When APICv is activated at runtime, GUEST_INTR_STATUS is used to configure
and report the current pending IRR and ISR states. Unless a specific vector
is explicitly included in EOI_EXIT_BITMAP, its EOI will not be trapped to
KVM. Intel VMX automatically clears the corresponding ISR bit based on the
GUEST_INTR_STATUS.SVI field.
When APICv is deactivated at runtime, the VM_ENTRY_INTR_INFO_FIELD is used
to specify the next interrupt vector to invoke upon VM-entry. The
VMX IDT_VECTORING_INFO_FIELD is used to report un-invoked vectors on
VM-exit. EOIs are always trapped to KVM, so the software can manually clear
pending ISR bits.
There are scenarios where, with APICv activated at runtime, a guest-issued
EOI may not be able to clear the pending ISR bit.
Taking vector 236 as an example, here is one scenario.
1. Suppose APICv is inactive. Vector 236 is pending in the IRR.
2. To handle KVM_REQ_EVENT, KVM moves vector 236 from the IRR to the ISR,
and configures the VM_ENTRY_INTR_INFO_FIELD via vmx_inject_irq().
3. After VM-entry, vector 236 is invoked through the guest IDT. At this
point, the data in VM_ENTRY_INTR_INFO_FIELD is no longer valid. The guest
interrupt handler for vector 236 is invoked.
4. Suppose a VM exit occurs very early in the guest interrupt handler,
before the EOI is issued.
5. Nothing is reported through the IDT_VECTORING_INFO_FIELD because
vector 236 has already been invoked in the guest.
6. Now, suppose APICv is activated. Before the next VM-entry, KVM calls
kvm_vcpu_update_apicv() to activate APICv.
7. Unfortunately, GUEST_INTR_STATUS.SVI is not configured, although
vector 236 is still pending in the ISR.
8. After VM-entry, the guest finally issues the EOI for vector 236.
However, because SVI is not configured, vector 236 is not cleared.
9. ISR is stalled forever on vector 236.
Here is another scenario.
1. Suppose APICv is inactive. Vector 236 is pending in the IRR.
2. To handle KVM_REQ_EVENT, KVM moves vector 236 from the IRR to the ISR,
and configures the VM_ENTRY_INTR_INFO_FIELD via vmx_inject_irq().
3. VM-exit occurs immediately after the next VM-entry. The vector 236 is
not invoked through the guest IDT. Instead, it is saved to the
IDT_VECTORING_INFO_FIELD during the VM-exit.
4. KVM calls kvm_queue_interrupt() to re-queue the un-invoked vector 236
into vcpu->arch.interrupt. A KVM_REQ_EVENT is requested.
5. Now, suppose APICv is activated. Before the next VM-entry, KVM calls
kvm_vcpu_update_apicv() to activate APICv.
6. Although APICv is now active, KVM still uses the legacy
VM_ENTRY_INTR_INFO_FIELD to re-inject vector 236. GUEST_INTR_STATUS.SVI is
not configured.
7. After the next VM-entry, vector 236 is invoked through the guest IDT.
Finally, an EOI occurs. However, due to the lack of GUEST_INTR_STATUS.SVI
configuration, vector 236 is not cleared from the ISR.
8. ISR is stalled forever on vector 236.
Using QEMU as an example, vector 236 is stuck in ISR forever.
(qemu) info lapic 1
dumping local APIC state for CPU 1
LVT0 0x00010700 active-hi edge masked ExtINT (vec 0)
LVT1 0x00010400 active-hi edge masked NMI
LVTPC 0x00000400 active-hi edge NMI
LVTERR 0x000000fe active-hi edge Fixed (vec 254)
LVTTHMR 0x00010000 active-hi edge masked Fixed (vec 0)
LVTT 0x000400ec active-hi edge tsc-deadline Fixed (vec 236)
Timer DCR=0x0 (divide by 2) initial_count = 0 current_count = 0
SPIV 0x000001ff APIC enabled, focus=off, spurious vec 255
ICR 0x000000fd physical edge de-assert no-shorthand
ICR2 0x00000000 cpu 0 (X2APIC ID)
ESR 0x00000000
ISR 236
IRR 37(level) 236
The issue isn't applicable to AMD SVM as KVM simply writes vmcb01 directly
irrespective of whether L1 (vmcs01) or L2 (vmcb02) is active (unlike VMX,
there is no need/cost to switch between VMCBs). In addition,
APICV_INHIBIT_REASON_IRQWIN ensures AMD SVM AVIC is not activated until
the last interrupt is EOI'd.
Fix the bug by configuring Intel VMX GUEST_INTR_STATUS.SVI if APICv is
activated at runtime.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Link: https://patch.msgid.link/20251110063212.34902-1-dongli.zhang@oracle.com
[sean: call out that SVM writes vmcb01 directly, tweak comment]
Link: https://patch.msgid.link/20251205231913.441872-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
[gulshan: resolved a minor conflict in vmx.c arising from a comment]
Signed-off-by: Gulshan Gabel <gulshan.gabel@nutanix.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit fd2dee1c6e upstream.
__do_user_fault() may be called with indeterminent interrupt enable
state, which means we may be preemptive at this point. This causes
problems when calling harden_branch_predictor(). For example, when
called from a data abort, do_alignment_fault()->do_bad_area().
Move harden_branch_predictor() out of __do_user_fault() and into the
calling contexts.
Moving it into do_kernel_address_page_fault(), we can be sure that
interrupts will be disabled here.
Converting do_translation_fault() to use do_kernel_address_page_fault()
rather than do_bad_area() means that we keep branch predictor handling
for translation faults. Interrupts will also be disabled at this call
site.
do_sect_fault() needs special handling, so detect user mode accesses
to kernel-addresses, and add an explicit call to branch predictor
hardening.
Finally, add branch predictor hardening to do_alignment() for the
faulting case (user mode accessing kernel addresses) before interrupts
are enabled.
This should cover all cases where harden_branch_predictor() is called,
ensuring that it is always has interrupts disabled, also ensuring that
it is called early in each call path.
Reviewed-by: Xie Yuanbin <xieyuanbin1@huawei.com>
Tested-by: Xie Yuanbin <xieyuanbin1@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7733bc7d29 upstream.
Zizhi Wo reports:
"During the execution of hash_name()->load_unaligned_zeropad(), a
potential memory access beyond the PAGE boundary may occur. For
example, when the filename length is near the PAGE_SIZE boundary.
This triggers a page fault, which leads to a call to
do_page_fault()->mmap_read_trylock(). If we can't acquire the lock,
we have to fall back to the mmap_read_lock() path, which calls
might_sleep(). This breaks RCU semantics because path lookup occurs
under an RCU read-side critical section."
This is seen with CONFIG_DEBUG_ATOMIC_SLEEP=y and CONFIG_KFENCE=y.
Kernel addresses (with the exception of the vectors/kuser helper
page) do not have VMAs associated with them. If the vectors/kuser
helper page faults, then there are two possibilities:
1. if the fault happened while in kernel mode, then we're basically
dead, because the CPU won't be able to vector through this page
to handle the fault.
2. if the fault happened while in user mode, that means the page was
protected from user access, and we want to fault anyway.
Thus, we can handle kernel addresses from any context entirely
separately without going anywhere near the mmap lock. This gives us
an entirely non-sleeping path for all kernel mode kernel address
faults.
As we handle the kernel address faults before interrupts are enabled,
this change has the side effect of improving the branch predictor
hardening, but does not completely solve the issue.
Reported-by: Zizhi Wo <wozizhi@huaweicloud.com>
Reported-by: Xie Yuanbin <xieyuanbin1@huawei.com>
Link: https://lore.kernel.org/r/20251126090505.3057219-1-wozizhi@huaweicloud.com
Reviewed-by: Xie Yuanbin <xieyuanbin1@huawei.com>
Tested-by: Xie Yuanbin <xieyuanbin1@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 40b466db1d upstream
Allow __do_kernel_fault() to detect the execution of memory, so we can
provide the same fault message as do_page_fault() would do. This is
required when we split the kernel address fault handling from the
main do_page_fault() code path.
Reviewed-by: Xie Yuanbin <xieyuanbin1@huawei.com>
Tested-by: Xie Yuanbin <xieyuanbin1@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit dea20281ac upstream.
Group is_permission_fault() with is_translation_fault(), which is
needed to use is_permission_fault() in __do_kernel_fault(). As
this is static inline, there is no need for this to be under
CONFIG_MMU.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0d046ae106 upstream.
When booting a debug PREEMPT_RT kernel on an ARM64 system, a "inconsistent
{HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage" lockdep warning message was
reported to the console.
During early boot, interrupts are enabled before the scheduler is
enabled. In this window (before SYSTEM_SCHEDULING is set) interrupts can
fire and in the hard interrupt context handler attempt to fill the pool
This can lead to a deadlock when the interrupt occurred when the interrupt
hits a region which holds a lock that is required to be taken in the
allocation path.
Add a new can_fill_pool() helper and reorder the exception rule and forbid
this scenario by excluding allocations from hard interrupt context.
Fixes: 06e0ae988f ("debugobjects: Allow to refill the pool before SYSTEM_SCHEDULING")
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260605173038.495075-1-longman@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 37de2dbc31 upstream.
fill_pool_map is used to suppress nesting violations caused by acquiring
a spinlock_t (from within the memory allocator) while holding a
raw_spinlock_t. The used annotation is wrong.
LD_WAIT_SLEEP is for always sleeping lock types such as mutex_t.
LD_WAIT_CONFIG is for lock type which are sleeping while spinning on
PREEMPT_RT such as spinlock_t.
Use LD_WAIT_CONFIG as override.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251127153652.291697-3-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Steven Rostedt
Joanne Koong
Bjorn Andersson
David Howells
Santosh Kalluri
Kuniyuki Iwashima
Davidlohr Bueso
Dexuan Cui
Thorsten Blum
Tao Cui
Florian Westphal
Thadeu Lima de Souza Cascardo
André Draszik
Bjoern Doebel
Eduard Zingerman
Jiexun Wang
Varun R Mallya
Mingyu Wang
Weiming Shi
Lord Ulf Henrik Holmberg
Dongli Zhang
Russell King (Oracle)
Waiman Long
Helen Koike
Sebastian Andrzej Siewior