Problem: Error on exit with EXITFREE and 'winfixbuf'.
Solution: Handle DT_FREE before checking for 'winfixbuf'.
(zeertzjq)
closes: #14314
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Page-wise scrolling with Ctrl-D/Ctrl-U implements
it's own logic to change the topline and cursor.
More logic than necessary for scrolling with Ctrl-F/Ctrl-B
was removed in patch 9.1.0211.
Solution: Re-use the logic from Ctrl-E/Ctrl-Y/Ctrl-F/Ctrl-B while
staying backward compatible as much as possible.
Restore some of the logic that determined how many lines will
be scrolled (Luuk van Baal)
closes: #14316
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Match empty blob literals.
- Match modifier arguments to :abclear commands.
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: CI: MS-Windows fails in test_winfixbuf
(after v9.1.208)
Solution: Instead of skipping the test, write the file
so it exists on disk, to verify that MS-Windows
short filename expansion is successful.
(Sean Dewar)
related: #14286
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Page-wise scrolling with Ctrl-F/Ctrl-B implements
it's own logic to change the topline and cursor.
In doing so, skipcol is not handled properly for
'smoothscroll', and virtual lines.
Solution: Re-use the logic from Ctrl-E/Ctrl-Y while staying
backward compatible as much as possible.
closes: #14268
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Motif: leaking memory when mui_mch_dialog() fails
(LuMingYinDetect)
Solution: When allocating the label using the XmStringCreateLtoR()
function fails, before returning also free the allocated
buttons pointer.
fixes: #14247closes: #14280
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: winfixbuf does not allow to re-edit current buffer
(Tim Pope, after v9.1.0147)
Solution: Explicitly allow :e even when 'winfixbuf' is set,
since it just re-loads the current buffer
(Colin Kennedy)
fixes: #14237closes: #14286
Signed-off-by: Colin Kennedy <colinvfx@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: unused display_text_first boolean var in win_line()
Solution: Remove unused display_text_first boolean variable
(Dylan Thacker-Smith)
The only place it is used, uses its initial constant value, then the
following conditionally values set to the variable are unused.
Specifically, it was commit 234c3fab28
that changed the use of display_text_first such that it doesn't have any
effect.
closes: #14305
Signed-off-by: Dylan Thacker-Smith <dylan.ah.smith@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Cannot use modifiers before :-Ntabmove.
Solution: Check backwards from the command instead of checking from the
start of the command line. Slightly adjust docs to make them
more consistent (zeertzjq).
closes: #14289
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Backspace inserts spaces with virtual text and 'smarttab'.
Solution: Ignore virtual text and wrapping when backspacing.
(zeertzjq)
related: neovim/neovim#28005
closes: #14296
Co-authored-by: VanaIgr <vanaigranov@gmail.com>
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: build-error on GNU HURD
Solution: Define _XOPEN_SOURCE like for Android and Cygwin
(James McCoy)
strptime() requires _XOPEN_SOURCE to be defined for its declaration to
be visible. This is already done for non-Android Linux and Cygwin, but
also needs to be exposed for GNU/Hurd.
closes: #14285
Signed-off-by: James McCoy <jamessan@jamessan.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Also:
- Refine comment matching (javaComment{Error\ and,Start}).
- Continue rewriting regexps (prefer atom grouping with
non-capturing parens; factor out common prefixes in
alternations).
- Allow for relative paths with the _file_ attribute of
{@snippet}.
- Anticipate HTML in the @see tags.
- Match the nullary method parens in javaDocSeeTagParam.
- Improve the boundary patterns for summary sentences of
documentation.
> This sentence ends at ... or at the first tag (as defined
> below).
There are Java documentation tags (@) and there are HTML
tags (<?>) (with Markdown looming large; see JEP 467). With
block tags, e.g. @param, @return, @see, we begin another
documentation "sentence" whether or not the author has
terminated the summary sentence with a period; with
.<!-- -->, we may follow abbreviations, enumerations,
initials, (but instead consider @literal or ) _within_
the summary sentence. On the other hand, inline tags, e.g.
@code, @link, @literal, should not terminate the summary
sentence.
References:
https://bugs.openjdk.org/browse/JDK-8075778https://www.oracle.com/technical-resources/articles/java/javadoc-tool.html#firstsentencehttps://docs.oracle.com/en/java/javase/21/docs/specs/javadoc/doc-comment-spec.html
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: leaking memory in add_user() (LuMingYinDetect)
Solution: free user_copy pointer instead of the user ptr
add_user() is called with a user pointer and the user pointer comes
from these functions:
- return value from the getpwent() function (Unix).
- return value from the getpwnam() function (Unix).
- return value from the NetUserEnum() function (MS Windows).
For the first 2 callers, the man page for those functions directly says,
one should not free the returned pointer (since it comes from static
memory).
For the third caller (on MS Windows), the returned buffer is already
freed directly after calling the add_user() function in
NetApiBufferFree(), so this would lead to a double free().
This all indicates, the user ptr is wrongly freed in the add_user()
function and the intention was to free the user_copy pointer instead in
case of an error.
So let's just use that now.
fixes: #14250closes: #14260
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: `gM` would include outer virtual text and its padding when
getting the line length used to calculate the middle of the
line, putting the cursor much closer to virtual text lines.
Solution: Exclude outer virtual text in getting the line length for
`gM`, so that virtual text doesn't influence where the cursor
is moved to (Dylan Thacker-Smith).
closes: #14262
Signed-off-by: Dylan Thacker-Smith <dylan.ah.smith@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: `gj`/`gk` was updating the desired cursor virtual column to
the outer virtual text, even though the actual cursor position
was moved to not be on the virtual text, leading the need to
do an extra `gj`/`gk` to move past each virtual text line.
(rickhowe)
Solution: Exclude the outer virtual text when getting the line length
for moving the cursor with `gj`/`gk`, so that no extra
movement is needed to skip over virtual text lines.
(Dylan Thacker-Smith)
fixes: #12028
related: #14262
Signed-off-by: Dylan Thacker-Smith <dylan.ah.smith@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Not enough tests for the slice() function.
Solution: Test with multibyte chars, and in both Legacy and Vim9 script.
Update docs to be clearer about how it treats composing chars.
(zeertzjq)
closes: #14275
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: compound operators broken for lambdas in an object
(girishji)
Solution: When using an object from the outer scope, use the LOADOUTER
instruction to load the object (Yegappan Lakshmanan).
fixes: #14236closes: #14266
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Remove old unused syntax groups.
- vimRegion, vimPattern and vimKeyword removed in Vim 5.3.
- vimAuSyntax, vimAutoCmdOpt, vimAutoSet and vimStatement removed in 5.6.
The following were linked in :hi commands but never defined with :syn
and, most likely, never used:
- vimHLMod introduced in 5.0.
- vimKeycode and vimKeycodeError introduced in 5.4.
- vimElseif introduced in 5.6.
- vimFold introduced in 6.4.
- vimOperStar (and vimoperStar) introduced in 9.0.
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: problem evaluating negated boolean logic
(lxhillwind)
Solution: Don't clear the first value on short circuit evaluation
(Yegappan Lakshmanan)
fixes: #14265closes: #14269
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Remember that ‘code fragments are typically Java source
code, but they may also be fragments of properties files,
source code in other languages, or plain text.’ Therefore,
with these changes, markup tags are highlighted in the Java
source files (as external snippets) and in the {@snippet}
tags.
Also:
- Improve matching of the multi-line {@code} documentation
tag with any contained balanced braces.
- Recognise the {@literal} documentation tag.
- Highlight stray blanks in comments.
Related to an enhancement proposal for PCRE-like callouts
discussed at https://github.com/vim/vim/issues/11217.
References:
https://openjdk.org/jeps/413https://docs.oracle.com/en/java/javase/21/docs/specs/javadoc/doc-comment-spec.html
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: CI: mingw complains about unknown escape sequence: '\l', fails with sodium v1.0.19
Solution: Use other slash instead, also revert sodium version to v1.0.18
Signed-off-by: Christian Brabandt <cb@256bit.org>
Improve function definition highlighting.
- Match bang and function modifiers - abort etc.
- Only match valid scope modifiers.
- Match listing commands.
- Don't match ex commands in function names.
- Split function syntax groups into :func and :def subgroups.
- Match Vim9-script parameter and return types.
- Limit legacy-script and Vim9-script comments to :func and :def
definitions, respectively.
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: memleak with ex_drop(), NULL dereference
(zeertzjq)
Solution: revert back to ex_rewind(), use curbuf instead of buf
fixes: #14246closes: #14251
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: :drop tries to :rewind the argumentlist, which results in E37
(after v9.1.0046)
Solution: instead of calling ex_rewind(), call open_buffer() only when
re-using the initial empty buffer
fixes: #14219closes: #14220
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Installer does not remove all files
Solution: Update installer and delete all files on uninstall
update Sodium library dependency, update Readme
(RestorerZ)
closes: #14214
Signed-off-by: RestorerZ <restorer@mail2k.ru>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Memory leak with "above" virtual text and 'relativenumber'.
Solution: Free "text_props" and "text_prop_idxs" before returning.
Also fix off-by-one error causing line number to be drawn
beyond end of window (zeertzjq).
fixes: #14239closes: #14241
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vento files are not recognized.
Solution: Recognize *.vto files as filetype "vento" (wrapperup)
Vento is a templating engine https://vento.js.org/closes: #14229
Signed-off-by: wrapperup <wrapperup4@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Restorer
zeertzjq
Luuk van Baal
dkearns
Enrico Maria De Angelis
Guilherme Puida
Sean Dewar
Christian Brabandt
Rocco Mao
Colin Kennedy
Aliaksei Budavei
partev
Dylan Thacker-Smith
Song-Tianxiang
James McCoy
Enno
Mihai Ciuraru
Yegappan Lakshmanan
RobbiZ98
Alin Mr
RestorerZ
Girish Palya
wrapperup