This is the experimental Vim 7 code. Much work to be done...

Initial revision
2026-05-28 00:21:57 +02:00 · 2004-06-13 12:29:53 +00:00 · 2004-06-13 12:29:53 +00:00
3251 changed files with 73 additions and 1390535 deletions
@@ -1,137 +0,0 @@
-# Unixen: object and executable files.
-*.o
-src/vim
-src/xxd/xxd
-src/auto/if_perl.c
-src/auto/gui_gtk_gresources.c
-src/auto/gui_gtk_gresources.h
-src/objects/.dirstamp
-src/tags
-
-# We do need src/auto/configure.
-src/auto/config.aap
-src/auto/config.cache
-src/auto/config.h
-src/auto/config.log
-src/auto/config.mk
-src/auto/config.status
-src/auto/configure.aap
-src/auto/osdef.h
-src/auto/link.log
-src/auto/link.sed
-src/auto/pathdef.c
-
-# Windows
-*.exe
-*.idb
-*.manifest
-*.exp
-*.obj
-*.pdb
-*.ilk
-*.sln
-*.suo
-*.res
-*.RES
-src/if_perl.c
-src/pathdef.c
-src/Obj*/pathdef.c
-gvimext.dll
-gvimext.lib
-gvim.lib
-runtime/doc/uganda.nsis.txt
-
-# Borland C++
-bcc.cfg
-*.ilc
-*.ild
-*.ilf
-*.ils
-*.map
-*.tds
-
-# NetBeans
-nbproject/*
-
-# Mac OSX
-src/xxd/xxd.dSYM
-
-# All platforms
-*.rej
-*.orig
-*.mo
-*.swp
-*~
-*.pyc
-*.log
-src/po/vim.pot
-
-# Generated by "make test"
-src/po/*.ck
-src/testdir/mbyte.vim
-src/testdir/mzscheme.vim
-src/testdir/lua.vim
-src/testdir/small.vim
-src/testdir/tiny.vim
-src/testdir/test*.out
-src/testdir/test*.failed
-src/testdir/test.log
-src/testdir/dostmp/*
-src/testdir/messages
-src/testdir/viminfo
-src/testdir/opt_test.vim
-src/memfile_test
-src/json_test
-src/message_test
-src/kword_test
-
-# From MacVim
-.*.swp
-.DS_Store
-src/MacVim/MacVim.xcodeproj/*.mode1
-src/MacVim/MacVim.xcodeproj/*.mode1v3
-src/MacVim/MacVim.xcodeproj/*.pbxuser
-src/MacVim/MacVim.xcodeproj/project.xcworkspace
-src/MacVim/MacVim.xcodeproj/xcuserdata
-src/MacVim/icons/*.pyc
-src/MacVim/icons/*.ttf
-src/MacVim/icons/*.reg
-src/MacVim/icons/*.zip
-src/MacVim/icons/*.txt
-src/MacVim/icons/*.so
-src/MacVim/icons/*.egg-info
-src/MacVim/icons/build
-src/MacVim/icons/makeicns/*.o
-src/MacVim/icons/makeicns/makeicns
-src/MacVim/PSMTabBarControl/PSMTabBarControl.xcodeproj/*.mode1
-src/MacVim/PSMTabBarControl/PSMTabBarControl.xcodeproj/*.mode1v3
-src/MacVim/PSMTabBarControl/PSMTabBarControl.xcodeproj/*.pbxuser
-src/MacVim/PSMTabBarControl/PSMTabBarControl.xcodeproj/xcuserdata
-src/MacVim/PSMTabBarControl/build
-src/MacVim/qlstephen/QuickLookStephen.xcodeproj/*.mode1
-src/MacVim/qlstephen/QuickLookStephen.xcodeproj/*.mode1v3
-src/MacVim/qlstephen/QuickLookStephen.xcodeproj/*.pbxuser
-src/MacVim/qlstephen/QuickLookStephen.xcodeproj/xcuserdata
-src/MacVim/qlstephen/build
-src/MacVim/build
-src/MacVim/DerivedData
-src/TAGS
-src/Vim
-src/auto/config.cache
-src/auto/config.h
-src/auto/config.log
-src/auto/config.mk
-src/auto/config.status
-src/auto/if_perl.c
-src/auto/link.log
-src/auto/link.sed
-src/auto/osdef.h
-src/auto/pathdef.c
-src/config.log
-src/config.status
-src/objects
-src/po/*.mo
-src/tags
-src/xxd/xxd
-src/xxd/xxd.dSYM
-src/a.out.dSYM
@@ -1,4 +0,0 @@
-# Format of this file: https://lgtm.com/help/lgtm/lgtm.yml-configuration-file
-path_classifiers:
-  documentation:
-    - runtime/tutor/tutor*
@@ -1,64 +0,0 @@
-language: c
-dist: trusty
-
-os:
-  - osx
-
-osx_image: xcode9.3
-
-compiler:
-  - clang
-
-env:
-  - MACOSX_DEPLOYMENT_TARGET=10.8
-    XCODEFLAGS="MACOSX_DEPLOYMENT_TARGET=10.8"
-    VERSIONER_PERL_VERSION=5.18
-    VERSIONER_PYTHON_VERSION=2.7
-    vi_cv_path_python=/usr/bin/python
-    vi_cv_path_python3=/usr/local/bin/python3
-    vi_cv_path_plain_lua=/usr/local/bin/lua
-    vi_cv_dll_name_perl=/System/Library/Perl/5.18/darwin-thread-multi-2level/CORE/libperl.dylib
-    vi_cv_dll_name_python=/System/Library/Frameworks/Python.framework/Versions/2.7/Python
-    vi_cv_dll_name_python3=/usr/local/Frameworks/Python.framework/Versions/3.6/Python
-    VIMCMD=src/MacVim/build/Release/MacVim.app/Contents/MacOS/Vim
-    "CONFOPT='--with-features=huge --enable-multibyte --enable-terminal --enable-netbeans --with-tlib=ncurses --enable-cscope --enable-perlinterp=dynamic --enable-pythoninterp=dynamic --enable-python3interp=dynamic --enable-rubyinterp=dynamic --with-ruby-command=/usr/local/bin/ruby --enable-luainterp=dynamic --with-lua-prefix=/usr/local --enable-gui=macvim'"
-
-sudo: false
-
-before_install:
-  - brew update || brew update
-  - brew upgrade python
-  - brew install lua
-  - brew install ruby
-
-script:
-  - NPROC=$(getconf _NPROCESSORS_ONLN)
-  - ./configure $CONFOPT --enable-fail-if-missing
-  - cat src/auto/config.mk
-  - grep -q -- "-DDYNAMIC_PERL_DLL=\\\\\"$vi_cv_dll_name_perl\\\\\"" src/auto/config.mk
-  - grep -q -- "-DDYNAMIC_PYTHON_DLL=\\\\\"$vi_cv_dll_name_python\\\\\"" src/auto/config.mk
-  - grep -q -- "-DDYNAMIC_PYTHON3_DLL=\\\\\"$vi_cv_dll_name_python3\\\\\"" src/auto/config.mk
-  - make -j$NPROC
-  - rm -f result; $VIMCMD -g -f -c "redir>result" -c "lua print(\"Test\")" -c "redir END" -c q; cat result; echo; grep -q -w Test result
-  - rm -f result; $VIMCMD -g -f -c "redir>result" -c "perl VIM::Msg(\"Test\")" -c "redir END" -c q; cat result; echo; grep -q -w Test result
-  - rm -f result; $VIMCMD -g -f -c "redir>result" -c "py import sys; print(\"Test\")" -c "redir END" -c q; cat result; echo; grep -q -w Test result
-  - rm -f result; $VIMCMD -g -f -c "redir>result" -c "py3 import sys; print(\"Test\")" -c "redir END" -c q; cat result; echo; grep -q -w Test result
-  - rm -f result; $VIMCMD -g -f -c "redir>result" -c "ruby puts(\"Test\")" -c "redir END" -c q; cat result; echo; grep -q -w Test result
-  - make test
-  - make -C src/testdir clean
-  - make -C src testgui
-
-before_deploy:
-  - make -C src macvim-dmg
-deploy:
-  provider: releases
-  api_key:
-    secure: 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
-  file: src/MacVim/build/Release/MacVim.dmg
-  skip_cleanup: true
-  on:
-    all_branches: true
-    tags: true
-    repo: macvim-dev/macvim
-
-# vim:set sts=2 sw=2 tw=0 et:
@@ -1,54 +0,0 @@
-# Contributing to Vim
-
-Patches are welcome in whatever form.
-Discussions about patches happen on the vim-dev maillist.
-If you create a pull request on GitHub it will be
-forwarded to the vim-dev maillist.  You can also send your patch there
-directly.  An attachment with a unified diff format is preferred.
-Information about the maillist can be found [on the Vim website].
-
-[on the Vim website]: http://www.vim.org/maillist.php#vim-dev
-
-Please consider adding a test.  Test coverage isn't very good yet, this needs
-to improve.  Look through recent patches for examples.  The tests are located
-under "src/testdir".
-
-
-# Reporting issues
-
-We use GitHub issues, but that is not a requirement.  Writing to the Vim
-maillist is also fine.
-
-Please use the GitHub issues only for actual issues. If you are not 100% sure
-that your problem is a Vim issue, please first discuss this on the Vim user
-maillist.  Try reproducing the problem without any plugins or settings:
-
-    vim -N -u NONE
-
-If you report an issue, please describe exactly how to reproduce it.
-For example, don't say "insert some text" but say what you did exactly:
-"ahere is some text&lt;Esc&gt;".
-Ideally, the steps you list can be used to write a test to verify the problem
-is fixed.
-
-Feel free to report even the smallest problem, also typos in the documentation.
-
-You can find known issues in the todo file: ":help todo".
-Or open [the todo file] on GitHub to see the latest version.
-
-[the todo file]: https://github.com/vim/vim/blob/master/runtime/doc/todo.txt
-
-
-# Syntax, indent and other runtime files
-
-The latest version of these files can be obtained from the repository.
-They are usually not updated with numbered patches.
-
-If you find a problem with one of these files or have a suggestion for
-improvement, please first try to contact the maintainer directly.
-Look in the header of the file for the name and email address.
-
-The maintainer will take care of issues and send updates to Bram for 
-distribution with Vim.
-
-If the maintainer does not react, contact the vim-dev maillist.
@@ -1,920 +0,0 @@
-# List of distributed Vim files.
-# Used by Makefile and upload.aap.
-
-# source files for all source archives
-SRC_ALL =	\
-		.hgignore \
-		.lgtm.yml \
-		.travis.yml \
-		appveyor.yml \
-		src/appveyor.bat \
-		src/README.txt \
-		src/alloc.h \
-		src/arabic.c \
-		src/arabic.h \
-		src/ascii.h \
-		src/beval.c \
-		src/beval.h \
-		src/blowfish.c \
-		src/buffer.c \
-		src/channel.c \
-		src/charset.c \
-		src/crypt.c \
-		src/crypt_zip.c \
-		src/dict.c \
-		src/diff.c \
-		src/digraph.c \
-		src/edit.c \
-		src/eval.c \
-		src/evalfunc.c \
-		src/ex_cmdidxs.h \
-		src/ex_cmds.c \
-		src/ex_cmds.h \
-		src/ex_cmds2.c \
-		src/ex_docmd.c \
-		src/ex_eval.c \
-		src/ex_getln.c \
-		src/farsi.c \
-		src/farsi.h \
-		src/feature.h \
-		src/fileio.c \
-		src/fold.c \
-		src/getchar.c \
-		src/globals.h \
-		src/gui.c \
-		src/gui.h \
-		src/gui_beval.c \
-		src/hardcopy.c \
-		src/hashtab.c \
-		src/json.c \
-		src/json_test.c \
-		src/kword_test.c \
-		src/list.c \
-		src/keymap.h \
-		src/macros.h \
-		src/main.c \
-		src/mark.c \
-		src/mbyte.c \
-		src/memfile.c \
-		src/memfile_test.c \
-		src/memline.c \
-		src/menu.c \
-		src/message.c \
-		src/message_test.c \
-		src/misc1.c \
-		src/misc2.c \
-		src/move.c \
-		src/mysign \
-		src/nbdebug.c \
-		src/nbdebug.h \
-		src/netbeans.c \
-		src/normal.c \
-		src/ops.c \
-		src/option.c \
-		src/option.h \
-		src/popupmnu.c \
-		src/quickfix.c \
-		src/regexp.c \
-		src/regexp_nfa.c \
-		src/regexp.h \
-		src/screen.c \
-		src/search.c \
-		src/sha256.c \
-		src/structs.h \
-		src/spell.c \
-		src/spell.h \
-		src/spellfile.c \
-		src/syntax.c \
-		src/tag.c \
-		src/term.c \
-		src/terminal.c \
-		src/term.h \
-		src/termlib.c \
-		src/ui.c \
-		src/undo.c \
-		src/userfunc.c \
-		src/version.c \
-		src/version.h \
-		src/vim.h \
-		src/winclip.c \
-		src/window.c \
-		src/tee/tee.c \
-		src/xxd/xxd.c \
-		src/main.aap \
-		src/testdir/gen_opt_test.vim \
-		src/testdir/main.aap \
-		src/testdir/README.txt \
-		src/testdir/Make_all.mak \
-		src/testdir/*.in \
-		src/testdir/*.py \
-		src/testdir/lsan-suppress.txt \
-		src/testdir/sautest/autoload/*.vim \
-		src/testdir/runtest.vim \
-		src/testdir/shared.vim \
-		src/testdir/screendump.vim \
-		src/testdir/view_util.vim \
-		src/testdir/setup.vim \
-		src/testdir/gui_init.vim \
-		src/testdir/setup_gui.vim \
-		src/testdir/gui_preinit.vim \
-		src/testdir/test[0-9]*.ok \
-		src/testdir/test[0-9]*a.ok \
-		src/testdir/test_[a-z]*.ok \
-		src/testdir/test49.vim \
-		src/testdir/test83-tags? \
-		src/testdir/test77a.com \
-		src/testdir/test_*.vim \
-		src/testdir/python2/*.py \
-		src/testdir/python3/*.py \
-		src/testdir/pythonx/*.py \
-		src/testdir/pythonx/topmodule/__init__.py \
-		src/testdir/pythonx/topmodule/submodule/__init__.py \
-		src/testdir/pythonx/topmodule/submodule/subsubmodule/__init__.py \
-		src/testdir/pythonx/topmodule/submodule/subsubmodule/subsubsubmodule.py \
-		src/testdir/python_after/*.py \
-		src/testdir/python_before/*.py \
-		src/testdir/pyxfile/*.py \
-		src/testdir/bench*.in \
-		src/testdir/bench*.vim \
-		src/testdir/dumps/*.dump \
-		src/testdir/samples/*.txt \
-		src/testdir/samples/test000 \
-		src/testdir/if_ver*.vim \
-		src/testdir/color_ramp.vim \
-		src/proto.h \
-		src/proto/arabic.pro \
-		src/proto/beval.pro \
-		src/proto/blowfish.pro \
-		src/proto/buffer.pro \
-		src/proto/channel.pro \
-		src/proto/charset.pro \
-		src/proto/crypt.pro \
-		src/proto/crypt_zip.pro \
-		src/proto/dict.pro \
-		src/proto/diff.pro \
-		src/proto/digraph.pro \
-		src/proto/edit.pro \
-		src/proto/eval.pro \
-		src/proto/evalfunc.pro \
-		src/proto/ex_cmds.pro \
-		src/proto/ex_cmds2.pro \
-		src/proto/ex_docmd.pro \
-		src/proto/ex_eval.pro \
-		src/proto/ex_getln.pro \
-		src/proto/farsi.pro \
-		src/proto/fileio.pro \
-		src/proto/fold.pro \
-		src/proto/getchar.pro \
-		src/proto/gui.pro \
-		src/proto/gui_beval.pro \
-		src/proto/hardcopy.pro \
-		src/proto/hashtab.pro \
-		src/proto/json.pro \
-		src/proto/list.pro \
-		src/proto/main.pro \
-		src/proto/mark.pro \
-		src/proto/mbyte.pro \
-		src/proto/memfile.pro \
-		src/proto/memline.pro \
-		src/proto/menu.pro \
-		src/proto/message.pro \
-		src/proto/misc1.pro \
-		src/proto/misc2.pro \
-		src/proto/move.pro \
-		src/proto/netbeans.pro \
-		src/proto/normal.pro \
-		src/proto/ops.pro \
-		src/proto/option.pro \
-		src/proto/popupmnu.pro \
-		src/proto/quickfix.pro \
-		src/proto/regexp.pro \
-		src/proto/screen.pro \
-		src/proto/search.pro \
-		src/proto/sha256.pro \
-		src/proto/spell.pro \
-		src/proto/spellfile.pro \
-		src/proto/syntax.pro \
-		src/proto/tag.pro \
-		src/proto/term.pro \
-		src/proto/terminal.pro \
-		src/proto/termlib.pro \
-		src/proto/ui.pro \
-		src/proto/undo.pro \
-		src/proto/userfunc.pro \
-		src/proto/version.pro \
-		src/proto/winclip.pro \
-		src/proto/window.pro \
-		src/libvterm/.bzrignore \
-		src/libvterm/.gitignore \
-		src/libvterm/LICENSE \
-		src/libvterm/Makefile \
-		src/libvterm/README \
-		src/libvterm/tbl2inc_c.pl \
-		src/libvterm/vterm.pc.in \
-		src/libvterm/bin/unterm.c \
-		src/libvterm/bin/vterm-ctrl.c \
-		src/libvterm/bin/vterm-dump.c \
-		src/libvterm/doc/URLs \
-		src/libvterm/doc/seqs.txt \
-		src/libvterm/include/vterm.h \
-		src/libvterm/include/vterm_keycodes.h \
-		src/libvterm/src/encoding.c \
-		src/libvterm/src/encoding/DECdrawing.inc \
-		src/libvterm/src/encoding/DECdrawing.tbl \
-		src/libvterm/src/encoding/uk.inc \
-		src/libvterm/src/encoding/uk.tbl \
-		src/libvterm/src/keyboard.c \
-		src/libvterm/src/mouse.c \
-		src/libvterm/src/parser.c \
-		src/libvterm/src/pen.c \
-		src/libvterm/src/rect.h \
-		src/libvterm/src/screen.c \
-		src/libvterm/src/state.c \
-		src/libvterm/src/unicode.c \
-		src/libvterm/src/utf8.h \
-		src/libvterm/src/vterm.c \
-		src/libvterm/src/vterm_internal.h \
-		src/libvterm/t/02parser.test \
-		src/libvterm/t/03encoding_utf8.test \
-		src/libvterm/t/10state_putglyph.test \
-		src/libvterm/t/11state_movecursor.test \
-		src/libvterm/t/12state_scroll.test \
-		src/libvterm/t/13state_edit.test \
-		src/libvterm/t/14state_encoding.test \
-		src/libvterm/t/15state_mode.test \
-		src/libvterm/t/16state_resize.test \
-		src/libvterm/t/17state_mouse.test \
-		src/libvterm/t/18state_termprops.test \
-		src/libvterm/t/20state_wrapping.test \
-		src/libvterm/t/21state_tabstops.test \
-		src/libvterm/t/22state_save.test \
-		src/libvterm/t/25state_input.test \
-		src/libvterm/t/26state_query.test \
-		src/libvterm/t/27state_reset.test \
-		src/libvterm/t/28state_dbl_wh.test \
-		src/libvterm/t/29state_fallback.test \
-		src/libvterm/t/30pen.test \
-		src/libvterm/t/40screen_ascii.test \
-		src/libvterm/t/41screen_unicode.test \
-		src/libvterm/t/42screen_damage.test \
-		src/libvterm/t/43screen_resize.test \
-		src/libvterm/t/44screen_pen.test \
-		src/libvterm/t/45screen_protect.test \
-		src/libvterm/t/46screen_extent.test \
-		src/libvterm/t/47screen_dbl_wh.test \
-		src/libvterm/t/48screen_termprops.test \
-		src/libvterm/t/90vttest_01-movement-1.test \
-		src/libvterm/t/90vttest_01-movement-2.test \
-		src/libvterm/t/90vttest_01-movement-3.test \
-		src/libvterm/t/90vttest_01-movement-4.test \
-		src/libvterm/t/90vttest_02-screen-1.test \
-		src/libvterm/t/90vttest_02-screen-2.test \
-		src/libvterm/t/90vttest_02-screen-3.test \
-		src/libvterm/t/90vttest_02-screen-4.test \
-		src/libvterm/t/92lp1640917.test \
-		src/libvterm/t/harness.c \
-		src/libvterm/t/run-test.pl \
-
-
-# source files for Unix only
-SRC_UNIX =	\
-		Makefile \
-		Filelist \
-		README_src.txt \
-		configure \
-		pixmaps/*.xpm \
-		pixmaps/*.png \
-		pixmaps/gen-inline-pixbufs.sh \
-		pixmaps/stock_icons.h \
-		src/INSTALL \
-		src/INSTALLx.txt \
-		src/Makefile \
-		src/auto/configure \
-		src/config.aap.in \
-		src/config.h.in \
-		src/config.mk.dist \
-		src/config.mk.in \
-		src/configure \
-		src/configure.ac \
-		src/create_cmdidxs.vim \
-		src/gui_at_fs.c \
-		src/gui_at_sb.c \
-		src/gui_at_sb.h \
-		src/gui_athena.c \
-		src/gui_gtk.c \
-		src/gui_gtk_f.c \
-		src/gui_gtk_f.h \
-		src/gui_gtk_x11.c \
-		src/gui_gtk_res.xml \
-		src/gui_motif.c \
-		src/gui_xmdlg.c \
-		src/gui_xmebw.c \
-		src/gui_xmebw.h \
-		src/gui_xmebwp.h \
-		src/gui_x11.c \
-		src/gui_x11_pm.h \
-		src/hangulin.c \
-		src/if_xcmdsrv.c \
-		src/integration.c \
-		src/integration.h \
-		src/link.sh \
-		src/installman.sh \
-		src/installml.sh \
-		src/install-sh \
-		src/os_unix.c \
-		src/os_unix.h \
-		src/os_unixx.h \
-		src/osdef.sh \
-		src/osdef1.h.in \
-		src/osdef2.h.in \
-		src/pathdef.sh \
-		src/proto/gui_athena.pro \
-		src/proto/gui_gtk.pro \
-		src/proto/gui_gtk_x11.pro \
-		src/proto/gui_gtk_gresources.pro \
-		src/proto/gui_motif.pro \
-		src/proto/gui_xmdlg.pro \
-		src/proto/gui_x11.pro \
-		src/proto/hangulin.pro \
-		src/proto/if_xcmdsrv.pro \
-		src/proto/os_unix.pro \
-		src/proto/pty.pro \
-		src/proto/workshop.pro \
-		src/pty.c \
-		src/testdir/Makefile \
-		src/testdir/unix.vim \
-		src/toolcheck \
-		src/vim_icon.xbm \
-		src/vim_mask.xbm \
-		src/vimtutor \
-		src/gvimtutor \
-		src/which.sh \
-		src/workshop.c \
-		src/workshop.h \
-		src/wsdebug.c \
-		src/wsdebug.h \
-		src/tee/Makefile \
-		src/xxd/Makefile \
-
-# source files for both DOS and Unix
-SRC_DOS_UNIX =	\
-		src/if_cscope.c \
-		src/if_cscope.h \
-		src/if_lua.c \
-		src/if_mzsch.c \
-		src/if_mzsch.h \
-		src/if_perl.xs \
-		src/if_perlsfio.c \
-		src/if_python.c \
-		src/if_python3.c \
-		src/if_py_both.h \
-		src/if_ruby.c \
-		src/if_tcl.c \
-		src/proto/if_cscope.pro \
-		src/proto/if_lua.pro \
-		src/proto/if_mzsch.pro \
-		src/proto/if_perl.pro \
-		src/proto/if_perlsfio.pro \
-		src/proto/if_python.pro \
-		src/proto/if_python3.pro \
-		src/proto/if_ruby.pro \
-		src/proto/if_tcl.pro \
-		src/typemap \
-
-# source files for DOS (also in the extra archive)
-SRC_DOS =	\
-		src/GvimExt/*.mak \
-		src/GvimExt/GvimExt.reg \
-		src/GvimExt/Makefile \
-		src/GvimExt/README.txt \
-		src/GvimExt/gvimext.cpp \
-		src/GvimExt/gvimext.def \
-		src/GvimExt/gvimext.h \
-		src/GvimExt/gvimext.inf \
-		src/GvimExt/gvimext.rc \
-		src/GvimExt/gvimext_ming.def \
-		src/GvimExt/gvimext_ming.rc \
-		src/GvimExt/resource.h \
-		src/GvimExt/uninst.bat \
-		README_srcdos.txt \
-		src/INSTALLpc.txt \
-		src/Make_bc5.mak \
-		src/Make_cyg.mak \
-		src/Make_cyg_ming.mak \
-		src/Make_ivc.mak \
-		src/Make_dvc.mak \
-		src/Make_ming.mak \
-		src/Make_mvc.mak \
-		tools/rename.bat \
-		src/bigvim.bat \
-		src/bigvim64.bat \
-		src/msvcsetup.bat \
-		src/msvc2008.bat \
-		src/msvc2010.bat \
-		src/msvc2015.bat \
-		src/dimm.idl \
-		src/dlldata.c \
-		src/dosinst.c \
-		src/dosinst.h \
-		src/glbl_ime.cpp \
-		src/glbl_ime.h \
-		src/gui_dwrite.cpp \
-		src/gui_dwrite.h \
-		src/gui_w32.c \
-		src/gui_w32_rc.h \
-		src/if_ole.cpp \
-		src/if_ole.h \
-		src/if_ole.idl \
-		src/if_perl_msvc/stdbool.h \
-		src/iscygpty.c \
-		src/iscygpty.h \
-		src/iid_ole.c \
-		src/os_dos.h \
-		src/os_w32dll.c \
-		src/os_w32exe.c \
-		src/os_win32.c \
-		src/os_mswin.c \
-		src/os_win32.h \
-		src/proto/gui_w32.pro \
-		src/proto/if_ole.pro \
-		src/proto/os_win32.pro \
-		src/proto/os_mswin.pro \
-		src/testdir/Make_dos.mak \
-		src/testdir/Make_ming.mak \
-		src/testdir/dos.vim \
-		src/uninstal.c \
-		src/vim.def \
-		src/vim.rc \
-		src/vimio.h \
-		src/gvim.exe.mnf \
-		src/vimrun.c \
-		src/xpm_w32.c \
-		src/xpm_w32.h \
-		src/tee/Make_mvc.mak \
-		src/xxd/Make_bc5.mak \
-		src/xxd/Make_ming.mak \
-		src/xxd/Make_mvc.mak \
-		nsis/gvim.nsi \
-		nsis/gvim_version.nsh \
-		nsis/vimrc.ini \
-		nsis/README.txt \
-		uninstal.txt \
-		src/VisVim/Commands.cpp \
-		src/VisVim/Commands.h \
-		src/VisVim/DSAddIn.cpp \
-		src/VisVim/DSAddIn.h \
-		src/VisVim/OleAut.cpp \
-		src/VisVim/OleAut.h \
-		src/VisVim/README_VisVim.txt \
-		src/VisVim/Reg.cpp \
-		src/VisVim/Register.bat \
-		src/VisVim/Resource.h \
-		src/VisVim/StdAfx.cpp \
-		src/VisVim/StdAfx.h \
-		src/VisVim/UnRegist.bat \
-		src/VisVim/VisVim.cpp \
-		src/VisVim/VisVim.def \
-		src/VisVim/VisVim.mak \
-		src/VisVim/VisVim.h \
-		src/VisVim/VisVim.odl \
-		src/VisVim/VisVim.rc \
-		src/VisVim/VsReadMe.txt \
-
-# source files for DOS without CR/LF translation (also in the extra archive)
-SRC_DOS_BIN =	\
-		src/VisVim/Res/*.bmp \
-		src/tearoff.bmp \
-		src/tools.bmp \
-		src/vim*.ico \
-		src/vim.tlb \
-		src/xpm/COPYRIGHT \
-		src/xpm/README.txt \
-		src/xpm/include/*.h \
-		src/xpm/x64/lib/libXpm.a \
-		src/xpm/x64/lib/libXpm.lib \
-		src/xpm/x64/lib-vc14/libXpm.lib \
-		src/xpm/x86/lib/libXpm.a \
-		src/xpm/x86/lib/libXpm.lib \
-		src/xpm/x86/lib-vc14/libXpm.lib \
-		nsis/icons/*.bmp \
-		nsis/icons/*.ico \
-
-# source files for Amiga, DOS, etc. (also in the extra archive)
-SRC_AMI_DOS =	\
-
-# source files for Amiga (also in the extra archive)
-SRC_AMI =	\
-		README_amisrc.txt \
-		README_amisrc.txt.info \
-		src.info \
-		src/INSTALLami.txt \
-		src/Make_dice.mak \
-		src/Make_manx.mak \
-		src/Make_morph.mak \
-		src/Make_sas.mak \
-		src/os_amiga.c \
-		src/os_amiga.h \
-		src/proto/os_amiga.pro \
-		src/testdir/Make_amiga.mak \
-		src/testdir/amiga.vim \
-		src/xxd/Make_amiga.mak \
-
-# source files for the Mac (also in the extra archive)
-SRC_MAC =	\
-		src/INSTALLmac.txt \
-		src/dehqx.py \
-		src/gui_mac.c \
-		src/os_mac_rsrc/*.icns \
-		src/os_mac.h \
-		src/os_mac.rsr.hqx \
-		src/os_mac_conv.c \
-		src/os_macosx.m \
-		src/proto/gui_mac.pro \
-		src/proto/os_mac_conv.pro \
-
-# source files for VMS (in the extra archive)
-SRC_VMS =	\
-		src/INSTALLvms.txt \
-		src/Make_vms.mms \
-		src/gui_gtk_vms.h \
-		src/os_vms.c \
-		src/os_vms_conf.h \
-		src/os_vms_mms.c \
-		src/proto/os_vms.pro \
-		src/testdir/Make_vms.mms \
-		src/testdir/vms.vim \
-		src/xxd/Make_vms.mms \
-		vimtutor.com \
-
-# source files for QNX (in the extra archive)
-SRC_QNX =	\
-		src/os_qnx.c \
-		src/os_qnx.h \
-		src/gui_photon.c \
-		src/proto/gui_photon.pro \
-		src/proto/os_qnx.pro \
-
-
-# source files for the extra archive (all sources that are not for Unix)
-SRC_EXTRA =	\
-		$(SRC_AMI) \
-		$(SRC_AMI_DOS) \
-		$(SRC_DOS) \
-		$(SRC_DOS_BIN) \
-		$(SRC_MAC) \
-		$(SRC_QNX) \
-		$(SRC_VMS) \
-		README_os390.txt \
-		src/Make_mint.mak \
-		src/infplist.xml \
-		src/link.390 \
-		src/os_beos.c \
-		src/os_beos.h \
-		src/os_beos.rsrc \
-		src/proto/os_beos.pro \
-		src/os_mint.h \
-		src/os_vms_fix.com \
-		src/toolbar.phi \
-
-# runtime files for all distributions
-RT_ALL =	\
-		README.txt \
-		README.md \
-		CONTRIBUTING.md \
-		runtime/bugreport.vim \
-		runtime/doc/*.awk \
-		runtime/doc/*.pl \
-		runtime/doc/*.txt \
-		runtime/doc/Makefile \
-		runtime/doc/doctags.c \
-		runtime/doc/test_urls.vim \
-		runtime/doc/vim.1 \
-		runtime/doc/evim.1 \
-		runtime/doc/vimdiff.1 \
-		runtime/doc/vimtutor.1 \
-		runtime/doc/xxd.1 \
-		runtime/ftoff.vim \
-		runtime/gvimrc_example.vim \
-		runtime/macros/README.txt \
-		runtime/macros/editexisting.vim \
-		runtime/macros/hanoi/click.me \
-		runtime/macros/hanoi/hanoi.vim \
-		runtime/macros/hanoi/poster \
-		runtime/macros/justify.vim \
-		runtime/macros/less.bat \
-		runtime/macros/less.sh \
-		runtime/macros/less.vim \
-		runtime/macros/life/click.me \
-		runtime/macros/life/life.vim \
-		runtime/macros/matchit.vim \
-		runtime/macros/maze/README.txt \
-		runtime/macros/maze/[mM]akefile \
-		runtime/macros/maze/main.aap \
-		runtime/macros/maze/maze.c \
-		runtime/macros/maze/maze_5.78 \
-		runtime/macros/maze/maze_mac \
-		runtime/macros/maze/mazeansi.c \
-		runtime/macros/maze/mazeclean.c \
-		runtime/macros/maze/poster \
-		runtime/macros/shellmenu.vim \
-		runtime/macros/swapmous.vim \
-		runtime/macros/urm/README.txt \
-		runtime/macros/urm/examples \
-		runtime/macros/urm/urm \
-		runtime/macros/urm/urm.vim \
-		runtime/defaults.vim \
-		runtime/evim.vim \
-		runtime/mswin.vim \
-		runtime/optwin.vim \
-		runtime/ftplugin.vim \
-		runtime/ftplugof.vim \
-		runtime/indent.vim \
-		runtime/indoff.vim \
-		runtime/termcap \
-		runtime/tools/README.txt \
-		runtime/tools/[a-z]*[a-z0-9] \
-		runtime/tutor/README.txt \
-		runtime/tutor/tutor \
-		runtime/tutor/tutor.vim \
-		runtime/vimrc_example.vim \
-		runtime/pack/dist/opt/dvorak/plugin/dvorak.vim \
-		runtime/pack/dist/opt/dvorak/dvorak/enable.vim \
-		runtime/pack/dist/opt/dvorak/dvorak/disable.vim \
-		runtime/pack/dist/opt/editexisting/plugin/editexisting.vim \
-		runtime/pack/dist/opt/justify/plugin/justify.vim \
-		runtime/pack/dist/opt/matchit/plugin/matchit.vim \
-		runtime/pack/dist/opt/matchit/doc/matchit.txt \
-		runtime/pack/dist/opt/matchit/doc/tags \
-		runtime/pack/dist/opt/shellmenu/plugin/shellmenu.vim \
-		runtime/pack/dist/opt/swapmouse/plugin/swapmouse.vim \
-		runtime/pack/dist/opt/termdebug/plugin/termdebug.vim \
-
-# runtime files for all distributions without CR-NL translation
-RT_ALL_BIN =	\
-		runtime/doc/tags \
-		runtime/print/*.ps \
-
-# runtime script files
-RT_SCRIPTS =	\
-		runtime/filetype.vim \
-		runtime/scripts.vim \
-		runtime/menu.vim \
-		runtime/macmap.vim \
-		runtime/delmenu.vim \
-		runtime/synmenu.vim \
-		runtime/makemenu.vim \
-		runtime/autoload/*.vim \
-		runtime/autoload/README.txt \
-		runtime/autoload/dist/*.vim \
-		runtime/autoload/xml/*.vim \
-		runtime/colors/*.vim \
-		runtime/colors/README.txt \
-		runtime/colors/tools/*.vim \
-		runtime/compiler/*.vim \
-		runtime/compiler/README.txt \
-		runtime/indent/*.vim \
-		runtime/indent/README.txt \
-		runtime/ftplugin/*.vim \
-		runtime/ftplugin/logtalk.dict \
-		runtime/ftplugin/README.txt \
-		runtime/plugin/*.vim \
-		runtime/plugin/README.txt \
-		runtime/syntax/*.vim \
-		runtime/syntax/README.txt \
-
-# Unix runtime
-RT_UNIX =	\
-		README_unix.txt \
-		runtime/hi16-action-make.png \
-		runtime/hi22-action-make.png \
-		runtime/vim16x16.png \
-		runtime/vim16x16.xpm \
-		runtime/vim32x32.png \
-		runtime/vim32x32.xpm \
-		runtime/vim48x48.png \
-		runtime/vim48x48.xpm \
-		runtime/gvim.desktop \
-		runtime/vim.desktop \
-
-# Unix and DOS runtime without CR-LF translation
-RT_UNIX_DOS_BIN =	\
-		runtime/vim16x16.gif \
-		runtime/vim32x32.gif \
-		runtime/vim48x48.gif \
-
-# runtime not for unix or extra
-RT_NO_UNIX =	\
-
-# runtime for Amiga (also in the extra archive)
-RT_AMI_DOS =	\
-		runtime/doc/vim.man \
-		runtime/doc/vimdiff.man \
-		runtime/doc/vimtutor.man \
-		runtime/doc/xxd.man \
-
-# DOS runtime (also in the extra archive)
-RT_DOS =	\
-		README_dos.txt \
-		runtime/rgb.txt \
-		vimtutor.bat \
-
-# DOS runtime without CR-LF translation (also in the extra archive)
-RT_DOS_BIN =	\
-		runtime/vimlogo.cdr \
-		runtime/vimlogo.eps \
-		runtime/vimlogo.gif \
-		runtime/vimlogo.pdf \
-
-# Amiga runtime (also in the extra archive)
-RT_AMI =	\
-		README.txt.info \
-		README_ami.txt \
-		README_ami.txt.info \
-		runtime/doc.info \
-		runtime/doc/*.info \
-		runtime/icons/README.txt \
-		runtime/icons/*.info \
-		runtime/icons.info \
-		runtime/macros.info \
-		runtime/macros/*.info \
-		runtime/macros/hanoi/*.info \
-		runtime/macros/life/*.info \
-		runtime/macros/maze/*.info \
-		runtime/macros/urm/*.info \
-		runtime/tools.info \
-		runtime/tutor.info \
-		runtime/tutor/*.info \
-
-# runtime files in extra archive
-RT_EXTRA =	\
-		$(RT_AMI) \
-		$(RT_AMI_DOS) \
-		$(RT_DOS) \
-		$(RT_DOS_BIN) \
-		README_mac.txt \
-
-# included in all Amiga archives
-ROOT_AMI =	\
-		Contents \
-		Contents.info \
-		runtime.info \
-		vimdir.info \
-
-# root files for the extra archive
-ROOT_EXTRA =	\
-		$(ROOT_AMI) \
-
-# files for Amiga small binary (also in extra archive)
-BIN_AMI =	\
-		README_amibin.txt \
-		README_amibin.txt.info \
-		Vim.info \
-		Xxd.info \
-
-# files for DOS binary (also in extra archive)
-BIN_DOS =	\
-		README_bindos.txt \
-		uninstal.txt \
-
-# files for Win32 OLE binary (also in extra archive)
-BIN_OLE =	\
-		README_ole.txt \
-
-# files for Win32s binary (also in extra archive)
-BIN_W32S =	\
-		README_w32s.txt \
-
-# files for VMS binary (also in extra archive)
-BIN_VMS =	\
-		README_vms.txt \
-
-# files for OS/2 binary (also in extra archive)
-BIN_OS2 =	\
-		README_os2.txt \
-
-# binary files for extra archive
-BIN_EXTRA =	\
-		$(BIN_AMI) \
-		$(BIN_DOS) \
-		$(BIN_OLE) \
-		$(BIN_W32S) \
-		$(BIN_VMS) \
-		$(BIN_OS2) \
-
-# all files for extra archive
-EXTRA =		\
-		$(BIN_EXTRA) \
-		$(ROOT_EXTRA) \
-		$(RT_EXTRA) \
-		$(SRC_EXTRA) \
-		README_extra.txt \
-		src/VisVim/VisVim.dll \
-		farsi/README.txt \
-		farsi/fonts/*/far-* \
-		runtime/vimlogo.xpm \
-		src/tee/Makefile \
-		src/tee/Make_mvc.mak \
-		src/tee/tee.c \
-
-# files in READMEdir that are included from the top dir
-IN_README_DIR = \
-		README.txt.info \
-		README_ami.txt \
-		README_ami.txt.info \
-		README_amibin.txt \
-		README_amibin.txt.info \
-		README_amisrc.txt \
-		README_amisrc.txt.info \
-		README_bindos.txt \
-		README_dos.txt \
-		README_extra.txt \
-		README_mac.txt \
-		README_ole.txt \
-		README_os2.txt \
-		README_os390.txt \
-		README_src.txt \
-		README_srcdos.txt \
-		README_unix.txt \
-		README_vms.txt \
-		README_w32s.txt \
-		Contents \
-		Contents.info \
-		Vim.info \
-		Xxd.info \
-		runtime.info \
-		src.info \
-		vimdir.info \
-
-# generic language files
-LANG_GEN = \
-		runtime/doc/*-de.1 \
-		runtime/doc/*-de.UTF-8.1 \
-		runtime/doc/*-fr.1 \
-		runtime/doc/*-fr.UTF-8.1 \
-		runtime/doc/*-it.1 \
-		runtime/doc/*-it.UTF-8.1 \
-		runtime/doc/*-ja.UTF-8.1 \
-		runtime/doc/*-pl.1 \
-		runtime/doc/*-pl.UTF-8.1 \
-		runtime/doc/*-ru.1 \
-		runtime/doc/*-ru.UTF-8.1 \
-		runtime/lang/README.txt \
-		runtime/lang/menu_*.vim \
-		runtime/keymap/README.txt \
-		runtime/keymap/*.vim \
-		runtime/tutor/README.*.txt \
-		runtime/tutor/Makefile \
-		runtime/tutor/tutor.utf-8 \
-		runtime/tutor/tutor.?? \
-		runtime/tutor/tutor.??.utf-8 \
-		runtime/tutor/tutor.??.euc \
-		runtime/tutor/tutor.??.sjis \
-		runtime/tutor/tutor.??.iso9 \
-		runtime/tutor/tutor.??.big5 \
-		runtime/tutor/tutor.??.cp1250 \
-		runtime/tutor/tutor.??.cp1251 \
-		runtime/tutor/tutor.??.cp737 \
-		runtime/tutor/tutor.??_??.utf-8 \
-		runtime/tutor/tutor.bar \
-		runtime/tutor/tutor.bar.utf-8 \
-		runtime/spell/README.txt \
-		runtime/spell/??/*.diff \
-		runtime/spell/??/main.aap \
-		runtime/spell/tet/*.diff \
-		runtime/spell/tet/main.aap \
-		runtime/spell/check/main.aap \
-		runtime/spell/check/*.aff \
-		runtime/spell/check/*.dic \
-		runtime/spell/yi/README.txt \
-		runtime/spell/main.aap \
-		runtime/spell/*.vim \
-
-# generic language files, binary
-LANG_GEN_BIN = \
-		runtime/spell/README_en.txt \
-		runtime/spell/en.ascii.spl \
-		runtime/spell/en.latin1.spl \
-		runtime/spell/en.utf-8.spl \
-		runtime/spell/en.ascii.sug \
-		runtime/spell/en.latin1.sug \
-		runtime/spell/en.utf-8.sug \
-
-# all files for lang archive
-LANG_SRC = \
-		src/po/README.txt \
-		src/po/README_mingw.txt \
-		src/po/README_mvc.txt \
-		src/po/check.vim \
-		src/po/cleanup.vim \
-		src/po/Makefile \
-		src/po/Make_cyg.mak \
-		src/po/Make_ming.mak \
-		src/po/Make_mvc.mak \
-		src/po/sjiscorr.c \
-		src/po/*.po \
-
-# the language files for the Win32 lang archive
-LANG_DOS = \
-		src/po/*.mo \
-
-# vim: set ft=make:
@@ -1,555 +0,0 @@
-# This Makefile has two purposes:
-# 1. Starting the compilation of Vim for Unix.
-# 2. Creating the various distribution files.
-
-
-#########################################################################
-# 1. Starting the compilation of Vim for Unix.
-#
-# Using this Makefile without an argument will compile Vim for Unix.
-# "make install" is also possible.
-#
-# NOTE: If this doesn't work properly, first change directory to "src" and use
-# the Makefile there:
-#	cd src
-#	make [arguments]
-# Noticed on AIX systems when using this Makefile: Trying to run "cproto" or
-# something else after Vim has been compiled.  Don't know why...
-# Noticed on OS/390 Unix: Restarts configure.
-#
-# The first (default) target is "first".  This will result in running
-# "make first", so that the target from "src/auto/config.mk" is picked
-# up properly when config didn't run yet.  Doing "make all" before configure
-# has run can result in compiling with $(CC) empty.
-
-first:
-	@if test ! -f src/auto/config.mk; then \
-		cp src/config.mk.dist src/auto/config.mk; \
-	fi
-	@echo "Starting make in the src directory."
-	@echo "If there are problems, cd to the src directory and run make there"
-	cd src && $(MAKE) $@
-
-# Some make programs use the last target for the $@ default; put the other
-# targets separately to always let $@ expand to "first" by default.
-all install uninstall tools config configure reconfig proto depend lint tags types test scripttests unittests testclean clean distclean:
-	@if test ! -f src/auto/config.mk; then \
-		cp src/config.mk.dist src/auto/config.mk; \
-	fi
-	@echo "Starting make in the src directory."
-	@echo "If there are problems, cd to the src directory and run make there"
-	cd src && $(MAKE) $@
-
-
-#########################################################################
-# 2. Creating the various distribution files.
-#
-# TARGET	PRODUCES		CONTAINS
-# unixall	vim-#.#.tar.bz2		All runtime files and sources, for Unix
-#
-# html		vim##html.zip		HTML docs
-#
-# dossrc	vim##src.zip		sources for MS-DOS
-# dosrt		vim##rt.zip		runtime for MS-DOS
-# dosbin	vim##w32.zip		binary for Win32
-#		gvim##.zip		binary for GUI Win32
-#		gvim##ole.zip		OLE exe for Win32 GUI
-#
-# OBSOLETE
-# amisrc	vim##src.tgz		sources for Amiga
-# amirt		vim##rt.tgz		runtime for Amiga
-# amibin	vim##bin.tgz		binary for Amiga
-#
-# farsi		farsi##.zip		Farsi fonts
-#
-#    All output files are created in the "dist" directory.  Existing files are
-#    overwritten!
-#    To do all this you need the Unix archive and compiled binaries.
-#    Before creating an archive first delete all backup files, *.orig, etc.
-
-MAJOR = 8
-MINOR = 1
-
-# CHECKLIST for creating a new version:
-#
-# - Update Vim version number.  For a test version in: src/version.h,
-#   READMEdir/Contents, MAJOR/MINOR above, VIMMAJOR and VIMMINOR in
-#   src/Makefile, README.txt, README.md, READMEdir/README*.txt,
-#   runtime/doc/*.txt and make nsis/gvim_version.nsh.
-#   For a minor/major version: src/GvimExt/GvimExt.reg, src/vim.def,
-#   src/gvim.exe.mnf.
-# - Compile Vim with GTK, Perl, Python, Python3, TCL, Ruby, MZscheme, Lua (if
-#   you can make it all work), Cscope and "huge" features.  Exclude workshop
-#   and SNiFF.
-# - With these features: "make proto" (requires cproto and Motif installed;
-#   ignore warnings for missing include files, fix problems for syntax errors).
-# - With these features: "make depend" (works best with gcc).
-# - If you have a lint program: "make lint" and check the output (ignore GTK
-#   warnings).
-# - If you have valgrind, enable it in src/testdir/Makefile and run "make
-#   test".  Enable EXITFREE, disable GUI, scheme and tcl to avoid false alarms.
-#   Check the valgrind output.
-# - If you have the efence library, enable it in "src/Makefile" and run "make
-#   test".  Disable Python and Ruby to avoid trouble with threads (efence is
-#   not threadsafe).
-# - Adjust the date and other info in src/version.h.
-# - Correct included_patches[] in src/version.c.
-# - Check for missing entries in runtime/makemenu.vim (with checkmenu script).
-# - Check for missing options in runtime/optwin.vim et al. (with check.vim).
-# - Do "make menu" to update the runtime/synmenu.vim file.
-# - Add remarks for changes to runtime/doc/version8.txt.
-# - Check that runtime/doc/help.txt doesn't contain entries in "LOCAL
-#   ADDITIONS".
-# - In runtime/doc run "make" and "make html" to check for errors.
-# - Check if src/Makefile, src/testdir/Makefile and src/feature.h don't contain
-#   any personal preferences or the changes mentioned above.
-# - Check file protections to be "644" for text and "755" for executables (run
-#   the "check" script).
-# - Check compiling on Amiga, MS-DOS and MS-Windows.
-# - Delete all *~, *.sw?, *.orig, *.rej files
-# - "make unixall", "make html"
-# - Make diff files against the previous release: "makediff7 7.1 7.2"
-#
-# Amiga: (OBSOLETE, Amiga files are no longer distributed)
-# - "make amisrc", move the archive to the Amiga and compile:
-#   "make -f Make_manx.mak" (will use "big" features by default).
-# - Run the tests: "make -f Make_manx.mak test"
-# - Place the executables Vim and Xxd in this directory (set the executable
-#   flag).
-# - "make amirt", "make amibin".
-#
-# MS-Windows:
-# - Run make on Unix to update the ".mo" files.
-# - Get 32 bit libintl-8.dll, libiconv-2.dll and libgcc_s_sjlj-1.dll. E.g. from
-#   https://mlocati.github.io/gettext-iconv-windows/ .
-#   Use the "shared-32.zip file and extract the archive to get the files.
-#   Put them in the gettext32 directory, "make dosrt" uses them.
-# - Get 64 bit libintl-8.dll and libiconv-2.dll. E.g. from
-#   https://mlocati.github.io/gettext-iconv-windows/ .
-#   Use the "shared-64.zip file and extract the archive to get the files.
-#   Put them in the gettext64 directory, "make dosrt" uses them.
-# - > make dossrc
-#   > make dosrt
-#   Unpack dist/vim##rt.zip and dist/vim##src.zip on an MS-Windows PC.
-#   This creates the directory vim/vim81 and puts all files in there.
-# Win32 console version build:
-# - See src/INSTALLpc.txt for installing the compiler and SDK.
-# - Set environment for Visual C++ 2015:
-#   > cd src
-#   > msvc2015.bat
-# - Build the console binary:
-#   > nmake -f Make_mvc.mak
-# - Run the tests and check the ouput:
-#   > nmake -f Make_mvc.mak testclean
-#   > nmake -f Make_mvc.mak test
-# - Rename (using ../tools/rename.bat):
-#           vim.exe to vimw32.exe
-#           tee/tee.exe to teew32.exe
-#           xxd/xxd.exe to xxdw32.exe
-#           vim.pdb to vimw32.pdb
-#           install.exe to installw32.exe
-#           uninstal.exe to uninstalw32.exe
-# Win32 GUI version build:
-# - > cd src
-#   > nmake -f Make_mvc.mak GUI=yes
-# - Run the tests and check the output:
-#   > nmake -f Make_mvc.mak testclean
-#   > nmake -f Make_mvc.mak testgvim
-# - move "gvim.exe" to here (otherwise the OLE version will overwrite it).
-# - Move gvim.pdb to here.
-# - Copy "GvimExt/gvimext.dll" to here.
-# - Delete vimrun.exe, install.exe and uninstal.exe.
-# Win32 GUI version with OLE, PERL, Ruby, TCL, PYTHON and dynamic IME:
-# - Install the interfaces you want, see src/INSTALLpc.txt
-#   Adjust bigvim.bat to match the version of each interface you want.
-# - Build:
-#   > cd src
-#   > bigvim.bat
-# - Run the tests:
-#   > nmake -f Make_mvc.mak testclean
-#   > nmake -f Make_mvc.mak testgvim
-#   - check the output.
-# - Rename "gvim.exe" to "gvim_ole.exe".
-# - Rename gvim.pdb to "gvim_ole.pdb".
-# - Delete install.exe and uninstal.exe.
-# Create the archives:
-# - Copy all the "*.exe" files to where this Makefile is.
-# - Copy all the "*.pdb" files to where this Makefile is.
-# - in this directory:
-#   > make dosbin
-# NSIS self installing exe:
-# - To get NSIS see http://nsis.sourceforge.net
-# - Make sure gvim_ole.exe, vimw32.exe, installw32.exe,
-#   uninstalw32.exe, teew32.exe and xxdw32.exe have been build as mentioned
-#   above.
-# - copy these files (get them from a binary archive or build them):
-#	gvimext.dll in src/GvimExt
-#	gvimext64.dll in src/GvimExt
-#	VisVim.dll in src/VisVim
-#   Note: VisVim needs to be build with MSVC 5, newer versions don't work.
-#   gvimext64.dll can be obtained from:
-#   https://github.com/vim/vim-win32-installer/releases
-#	It is part of gvim_8.0.*_x64.zip as vim/vim80/GvimExt/gvimext64.dll.
-# - Make sure there is a diff.exe two levels up (get it from a previous Vim
-#   version).  Also put winpty32.dll and winpty-agent.exe there.
-# - go to ../nsis and do:
-#   > makensis gvim.nsi  (takes a few minutes).
-#      ignore warning for libwinpthread-1.dll
-# - Copy gvim##.exe to the dist directory.
-#
-# 64 bit builds (these are not in the normal distribution, the 32 bit build
-# works just fine on 64 bit systems).
-# Like the console and GUI version, but first run vcvars64.bat or
-#   "..\VC\vcvarsall.bat x86_amd64".
-# - Build the console version:
-#   > nmake -f Make_mvc.mak
-# - Build the GUI version:
-#   > nmake -f Make_mvc.mak GUI=yes
-# - Build the OLE version with interfaces:
-#   > bigvim64.bat
-#
-#
-# OBSOLETE systems: You can build these if you have an appropriate system.
-#
-# 16 bit DOS version: You need to get a very old version of Vim, for several
-# years even the tiny build is too big to fit in DOS memory.
-#
-# 32 bit DOS version: Support was removed in 7.4.1399.  When syncing to before
-# that it probably won't build.
-#
-# Win32s GUI version: Support was removed in patch 7.4.1364.
-#
-# OS/2 support was removed in patch 7.4.1008.  If you want to give it a try
-# sync to before that and check the old version of this Makefile for
-# instructions.
-
-VIMVER	= vim-$(MAJOR).$(MINOR)
-VERSION = $(MAJOR)$(MINOR)
-VDOT	= $(MAJOR).$(MINOR)
-VIMRTDIR = vim$(VERSION)
-
-# Vim used for conversion from "unix" to "dos"
-VIM	= vim
-
-# How to include Filelist depends on the version of "make" you have.
-# If the current choice doesn't work, try the other one.
-
-include Filelist
-#.include "Filelist"
-
-
-# All output is put in the "dist" directory.
-dist:
-	mkdir dist
-
-# Clean up some files to avoid they are included.
-# Copy README files to the top directory.
-prepare:
-	if test -f runtime/doc/uganda.nsis.txt; then \
-		rm runtime/doc/uganda.nsis.txt; fi
-	for name in $(IN_README_DIR); do \
-	  cp READMEdir/"$$name" .; \
-	  done
-
-# For the zip files we need to create a file with the comment line
-dist/comment:
-	mkdir dist/comment
-
-COMMENT_RT = comment/$(VERSION)-rt
-COMMENT_W32 = comment/$(VERSION)-bin-w32
-COMMENT_GVIM = comment/$(VERSION)-bin-gvim
-COMMENT_OLE = comment/$(VERSION)-bin-ole
-COMMENT_SRC = comment/$(VERSION)-src
-COMMENT_HTML = comment/$(VERSION)-html
-COMMENT_FARSI = comment/$(VERSION)-farsi
-
-dist/$(COMMENT_RT): dist/comment
-	echo "Vim - Vi IMproved - v$(VDOT) runtime files for MS-DOS and MS-Windows" > dist/$(COMMENT_RT)
-
-dist/$(COMMENT_W32): dist/comment
-	echo "Vim - Vi IMproved - v$(VDOT) binaries for MS-Windows NT/95" > dist/$(COMMENT_W32)
-
-dist/$(COMMENT_GVIM): dist/comment
-	echo "Vim - Vi IMproved - v$(VDOT) GUI binaries for MS-Windows NT/95" > dist/$(COMMENT_GVIM)
-
-dist/$(COMMENT_OLE): dist/comment
-	echo "Vim - Vi IMproved - v$(VDOT) MS-Windows GUI binaries with OLE support" > dist/$(COMMENT_OLE)
-
-dist/$(COMMENT_SRC): dist/comment
-	echo "Vim - Vi IMproved - v$(VDOT) sources for MS-DOS and MS-Windows" > dist/$(COMMENT_SRC)
-
-dist/$(COMMENT_HTML): dist/comment
-	echo "Vim - Vi IMproved - v$(VDOT) documentation in HTML" > dist/$(COMMENT_HTML)
-
-dist/$(COMMENT_FARSI): dist/comment
-	echo "Vim - Vi IMproved - v$(VDOT) Farsi language files" > dist/$(COMMENT_FARSI)
-
-unixall: dist prepare
-	-rm -f dist/$(VIMVER).tar.bz2
-	-rm -rf dist/$(VIMRTDIR)
-	mkdir dist/$(VIMRTDIR)
-	tar cf - \
-		$(RT_ALL) \
-		$(RT_ALL_BIN) \
-		$(RT_UNIX) \
-		$(RT_UNIX_DOS_BIN) \
-		$(RT_SCRIPTS) \
-		$(LANG_GEN) \
-		$(LANG_GEN_BIN) \
-		$(SRC_ALL) \
-		$(SRC_UNIX) \
-		$(SRC_DOS_UNIX) \
-		$(EXTRA) \
-		$(LANG_SRC) \
-		| (cd dist/$(VIMRTDIR); tar xf -)
-	-rm $(IN_README_DIR)
-# Need to use a "distclean" config.mk file
-# Note: this file is not included in the repository to avoid problems, but it's
-# OK to put it in the archive.
-	cp -f src/config.mk.dist dist/$(VIMRTDIR)/src/auto/config.mk
-# Create an empty config.h file, make dependencies require it
-	touch dist/$(VIMRTDIR)/src/auto/config.h
-# Make sure configure is newer than config.mk to force it to be generated
-	touch dist/$(VIMRTDIR)/src/configure
-# Make sure ja.sjis.po is newer than ja.po to avoid it being regenerated.
-# Same for cs.cp1250.po, pl.cp1250.po and sk.cp1250.po.
-	touch dist/$(VIMRTDIR)/src/po/ja.sjis.po
-	touch dist/$(VIMRTDIR)/src/po/cs.cp1250.po
-	touch dist/$(VIMRTDIR)/src/po/pl.cp1250.po
-	touch dist/$(VIMRTDIR)/src/po/sk.cp1250.po
-	touch dist/$(VIMRTDIR)/src/po/zh_CN.cp936.po
-	touch dist/$(VIMRTDIR)/src/po/ru.cp1251.po
-	touch dist/$(VIMRTDIR)/src/po/uk.cp1251.po
-# Create the archive.
-	cd dist && tar cf $(VIMVER).tar $(VIMRTDIR)
-	bzip2 dist/$(VIMVER).tar
-
-# Amiga runtime - OBSOLETE
-amirt: dist prepare
-	-rm -f dist/vim$(VERSION)rt.tar.gz
-	-rm -rf dist/Vim
-	mkdir dist/Vim
-	mkdir dist/Vim/$(VIMRTDIR)
-	tar cf - \
-		$(ROOT_AMI) \
-		$(RT_ALL) \
-		$(RT_ALL_BIN) \
-		$(RT_SCRIPTS) \
-		$(RT_AMI) \
-		$(RT_NO_UNIX) \
-		$(RT_AMI_DOS) \
-		| (cd dist/Vim/$(VIMRTDIR); tar xf -)
-	-rm $(IN_README_DIR)
-	mv dist/Vim/$(VIMRTDIR)/vimdir.info dist/Vim.info
-	mv dist/Vim/$(VIMRTDIR)/runtime.info dist/Vim/$(VIMRTDIR).info
-	mv dist/Vim/$(VIMRTDIR)/runtime/* dist/Vim/$(VIMRTDIR)
-	rmdir dist/Vim/$(VIMRTDIR)/runtime
-	cd dist && tar cf vim$(VERSION)rt.tar Vim Vim.info
-	gzip -9 dist/vim$(VERSION)rt.tar
-	mv dist/vim$(VERSION)rt.tar.gz dist/vim$(VERSION)rt.tgz
-
-# Amiga binaries - OBSOLETE
-amibin: dist prepare
-	-rm -f dist/vim$(VERSION)bin.tar.gz
-	-rm -rf dist/Vim
-	mkdir dist/Vim
-	mkdir dist/Vim/$(VIMRTDIR)
-	tar cf - \
-		$(ROOT_AMI) \
-		$(BIN_AMI) \
-		Vim \
-		Xxd \
-		| (cd dist/Vim/$(VIMRTDIR); tar xf -)
-	-rm $(IN_README_DIR)
-	mv dist/Vim/$(VIMRTDIR)/vimdir.info dist/Vim.info
-	mv dist/Vim/$(VIMRTDIR)/runtime.info dist/Vim/$(VIMRTDIR).info
-	cd dist && tar cf vim$(VERSION)bin.tar Vim Vim.info
-	gzip -9 dist/vim$(VERSION)bin.tar
-	mv dist/vim$(VERSION)bin.tar.gz dist/vim$(VERSION)bin.tgz
-
-# Amiga sources - OBSOLETE
-amisrc: dist prepare
-	-rm -f dist/vim$(VERSION)src.tar.gz
-	-rm -rf dist/Vim
-	mkdir dist/Vim
-	mkdir dist/Vim/$(VIMRTDIR)
-	tar cf - \
-		$(ROOT_AMI) \
-		$(SRC_ALL) \
-		$(SRC_AMI) \
-		$(SRC_AMI_DOS) \
-		| (cd dist/Vim/$(VIMRTDIR); tar xf -)
-	-rm $(IN_README_DIR)
-	mv dist/Vim/$(VIMRTDIR)/vimdir.info dist/Vim.info
-	mv dist/Vim/$(VIMRTDIR)/runtime.info dist/Vim/$(VIMRTDIR).info
-	cd dist && tar cf vim$(VERSION)src.tar Vim Vim.info
-	gzip -9 dist/vim$(VERSION)src.tar
-	mv dist/vim$(VERSION)src.tar.gz dist/vim$(VERSION)src.tgz
-
-no_title.vim: Makefile
-	echo "set notitle noicon nocp nomodeline viminfo=" >no_title.vim
-
-# MS-DOS sources
-dossrc: dist no_title.vim dist/$(COMMENT_SRC) \
-	runtime/doc/uganda.nsis.txt \
-	nsis/gvim_version.nsh
-	-rm -rf dist/vim$(VERSION)src.zip
-	-rm -rf dist/vim
-	mkdir dist/vim
-	mkdir dist/vim/$(VIMRTDIR)
-	tar cf - \
-		$(SRC_ALL) \
-		$(SRC_DOS) \
-		$(SRC_AMI_DOS) \
-		$(SRC_DOS_UNIX) \
-		runtime/doc/uganda.nsis.txt \
-		nsis/gvim_version.nsh \
-		| (cd dist/vim/$(VIMRTDIR); tar xf -)
-	mv dist/vim/$(VIMRTDIR)/runtime/* dist/vim/$(VIMRTDIR)
-	rmdir dist/vim/$(VIMRTDIR)/runtime
-	# This file needs to be in dos fileformat for NSIS.
-	$(VIM) -e -X -u no_title.vim -c ":set tx|wq" dist/vim/$(VIMRTDIR)/doc/uganda.nsis.txt
-	tar cf - \
-		$(SRC_DOS_BIN) \
-		| (cd dist/vim/$(VIMRTDIR); tar xf -)
-	cd dist && zip -9 -rD -z vim$(VERSION)src.zip vim <$(COMMENT_SRC)
-
-runtime/doc/uganda.nsis.txt: runtime/doc/uganda.txt
-	cd runtime/doc && $(MAKE) uganda.nsis.txt
-
-nsis/gvim_version.nsh: Makefile
-	echo "# Generated from Makefile: define the version numbers" > $@
-	echo "!ifndef __GVIM_VER__NSH__"  >> $@
-	echo "!define __GVIM_VER__NSH__"  >> $@
-	echo "!define VER_MAJOR $(MAJOR)" >> $@
-	echo "!define VER_MINOR $(MINOR)" >> $@
-	echo "!endif" >> $@
-
-dosrt: dist dist/$(COMMENT_RT) dosrt_files
-	-rm -rf dist/vim$(VERSION)rt.zip
-	cd dist && zip -9 -rD -z vim$(VERSION)rt.zip vim <$(COMMENT_RT)
-
-# Split in two parts to avoid an "argument list too long" error.
-# We no longer convert the files from unix to dos fileformat.
-dosrt_files: dist prepare no_title.vim
-	-rm -rf dist/vim
-	mkdir dist/vim
-	mkdir dist/vim/$(VIMRTDIR)
-	mkdir dist/vim/$(VIMRTDIR)/lang
-	cd src && MAKEMO=yes $(MAKE) languages
-	tar cf - \
-		$(RT_ALL) \
-		| (cd dist/vim/$(VIMRTDIR); tar xf -)
-	tar cf - \
-		$(RT_SCRIPTS) \
-		$(RT_DOS) \
-		$(RT_NO_UNIX) \
-		$(RT_AMI_DOS) \
-		$(LANG_GEN) \
-		| (cd dist/vim/$(VIMRTDIR); tar xf -)
-	tar cf - \
-		$(RT_UNIX_DOS_BIN) \
-		$(RT_ALL_BIN) \
-		$(RT_DOS_BIN) \
-		$(LANG_GEN_BIN) \
-		| (cd dist/vim/$(VIMRTDIR); tar xf -)
-	-rm $(IN_README_DIR)
-	mv dist/vim/$(VIMRTDIR)/runtime/* dist/vim/$(VIMRTDIR)
-	rmdir dist/vim/$(VIMRTDIR)/runtime
-# Add the message translations.  Trick: skip ja.mo and use ja.sjis.mo instead.
-# Same for cs.mo / cs.cp1250.mo, pl.mo / pl.cp1250.mo, sk.mo / sk.cp1250.mo,
-# zh_CN.mo / zh_CN.cp936.mo, uk.mo / uk.cp1251.mo and ru.mo / ru.cp1251.mo.
-	for i in $(LANG_DOS); do \
-	      if test "$$i" != "src/po/ja.mo" -a "$$i" != "src/po/pl.mo" -a "$$i" != "src/po/cs.mo" -a "$$i" != "src/po/sk.mo" -a "$$i" != "src/po/zh_CN.mo" -a "$$i" != "src/po/ru.mo" -a "$$i" != "src/po/uk.mo"; then \
-		n=`echo $$i | sed -e "s+src/po/\([-a-zA-Z0-9_]*\(.UTF-8\)*\)\(.sjis\)*\(.cp1250\)*\(.cp1251\)*\(.cp936\)*.mo+\1+"`; \
-		mkdir dist/vim/$(VIMRTDIR)/lang/$$n; \
-		mkdir dist/vim/$(VIMRTDIR)/lang/$$n/LC_MESSAGES; \
-		cp $$i dist/vim/$(VIMRTDIR)/lang/$$n/LC_MESSAGES/vim.mo; \
-	      fi \
-	    done
-	mkdir dist/vim/$(VIMRTDIR)/gettext32
-	cp gettext32/libintl-8.dll dist/vim/$(VIMRTDIR)/gettext32/
-	cp gettext32/libiconv-2.dll dist/vim/$(VIMRTDIR)/gettext32/
-	cp gettext32/libgcc_s_sjlj-1.dll dist/vim/$(VIMRTDIR)/gettext32/
-	mkdir dist/vim/$(VIMRTDIR)/gettext64
-	cp gettext64/libintl-8.dll dist/vim/$(VIMRTDIR)/gettext64/
-	cp gettext64/libiconv-2.dll dist/vim/$(VIMRTDIR)/gettext64/
-
-
-# Used before uploading.  Don't delete the AAPDIR/sign files!
-runtime_unix2dos: dosrt_files
-	-rm -rf `find runtime/dos -type f -print | sed -e /AAPDIR/d`
-	cd dist/vim/$(VIMRTDIR); tar cf - * \
-		| (cd ../../../runtime/dos; tar xf -)
-
-dosbin: prepare dosbin_gvim dosbin_w32 dosbin_ole $(DOSBIN_S)
-	-rm $(IN_README_DIR)
-
-# make Win32 gvim
-dosbin_gvim: dist no_title.vim dist/$(COMMENT_GVIM)
-	-rm -rf dist/gvim$(VERSION).zip
-	-rm -rf dist/vim
-	mkdir dist/vim
-	mkdir dist/vim/$(VIMRTDIR)
-	tar cf - \
-		$(BIN_DOS) \
-		| (cd dist/vim/$(VIMRTDIR); tar xf -)
-	cp gvim.exe dist/vim/$(VIMRTDIR)/gvim.exe
-	cp teew32.exe dist/vim/$(VIMRTDIR)/tee.exe
-	cp xxdw32.exe dist/vim/$(VIMRTDIR)/xxd.exe
-	cp vimrun.exe dist/vim/$(VIMRTDIR)/vimrun.exe
-	cp installw32.exe dist/vim/$(VIMRTDIR)/install.exe
-	cp uninstalw32.exe dist/vim/$(VIMRTDIR)/uninstal.exe
-	mkdir dist/vim/$(VIMRTDIR)/GvimExt32
-	cp gvimext.dll dist/vim/$(VIMRTDIR)/GvimExt32/gvimext.dll
-	mkdir dist/vim/$(VIMRTDIR)/GvimExt64
-	cp gvimext64.dll dist/vim/$(VIMRTDIR)/GvimExt64/gvimext.dll
-	cd dist && zip -9 -rD -z gvim$(VERSION).zip vim <$(COMMENT_GVIM)
-	cp gvim.pdb dist/gvim$(VERSION).pdb
-
-# make Win32 console
-dosbin_w32: dist no_title.vim dist/$(COMMENT_W32)
-	-rm -rf dist/vim$(VERSION)w32.zip
-	-rm -rf dist/vim
-	mkdir dist/vim
-	mkdir dist/vim/$(VIMRTDIR)
-	tar cf - \
-		$(BIN_DOS) \
-		| (cd dist/vim/$(VIMRTDIR); tar xf -)
-	cp vimw32.exe dist/vim/$(VIMRTDIR)/vim.exe
-	cp teew32.exe dist/vim/$(VIMRTDIR)/tee.exe
-	cp xxdw32.exe dist/vim/$(VIMRTDIR)/xxd.exe
-	cp installw32.exe dist/vim/$(VIMRTDIR)/install.exe
-	cp uninstalw32.exe dist/vim/$(VIMRTDIR)/uninstal.exe
-	cd dist && zip -9 -rD -z vim$(VERSION)w32.zip vim <$(COMMENT_W32)
-	cp vimw32.pdb dist/vim$(VERSION)w32.pdb
-
-# make Win32 gvim with OLE
-dosbin_ole: dist no_title.vim dist/$(COMMENT_OLE)
-	-rm -rf dist/gvim$(VERSION)ole.zip
-	-rm -rf dist/vim
-	mkdir dist/vim
-	mkdir dist/vim/$(VIMRTDIR)
-	tar cf - \
-		$(BIN_DOS) \
-		| (cd dist/vim/$(VIMRTDIR); tar xf -)
-	cp gvim_ole.exe dist/vim/$(VIMRTDIR)/gvim.exe
-	cp teew32.exe dist/vim/$(VIMRTDIR)/tee.exe
-	cp xxdw32.exe dist/vim/$(VIMRTDIR)/xxd.exe
-	cp vimrun.exe dist/vim/$(VIMRTDIR)/vimrun.exe
-	cp installw32.exe dist/vim/$(VIMRTDIR)/install.exe
-	cp uninstalw32.exe dist/vim/$(VIMRTDIR)/uninstal.exe
-	cp gvimext.dll dist/vim/$(VIMRTDIR)/gvimext.dll
-	cp README_ole.txt dist/vim/$(VIMRTDIR)
-	cp src/VisVim/VisVim.dll dist/vim/$(VIMRTDIR)/VisVim.dll
-	cp src/VisVim/README_VisVim.txt dist/vim/$(VIMRTDIR)
-	cd dist && zip -9 -rD -z gvim$(VERSION)ole.zip vim <$(COMMENT_OLE)
-	cp gvim_ole.pdb dist/gvim$(VERSION)ole.pdb
-
-html: dist dist/$(COMMENT_HTML)
-	-rm -rf dist/vim$(VERSION)html.zip
-	cd runtime/doc && zip -9 -z ../../dist/vim$(VERSION)html.zip *.html <../../dist/$(COMMENT_HTML)
-
-farsi: dist dist/$(COMMENT_FARSI)
-	-rm -f dist/farsi$(VERSION).zip
-	zip -9 -rD -z dist/farsi$(VERSION).zip farsi < dist/$(COMMENT_FARSI)
@@ -1,12 +0,0 @@
-Vim - the text editor - for Mac OS X
-
-This is the official GitHub repository for MacVim, the macOS port of [vim](https://github.com/vim/vim). It is based on
-[Björn Winckler's repository](https://github.com/b4winckler/macvim), which was official until he stepped down as the
-maintainer of the port.
-
- MacVim homepage http://macvim-dev.github.io/macvim
-
- Vim README https://github.com/macvim-dev/macvim/blob/master/README_vim.md
-
- Travis CI <a href="https://travis-ci.org/macvim-dev/macvim"><img src="https://travis-ci.org/macvim-dev/macvim.svg?branch=master" alt="Build Status"></a><a href="https://travis-ci.org/macvim-dev/homebrew-macvim"><img src="https://travis-ci.org/macvim-dev/homebrew-macvim.svg?branch=master" alt="Build Status"></a>
-
@@ -1,33 +1,26 @@
-README.txt for version 8.1 of Vim: Vi IMproved.
+README.txt for version 7.0aa of Vim: Vi IMproved.


-WHAT IS VIM?
+WHAT IS VIM

-Vim is a greatly improved version of the good old UNIX editor Vi.  Many new
-features have been added: multi-level undo, syntax highlighting, command line
-history, on-line help, spell checking, filename completion, block operations,
-script language, etc.  There is also a Graphical User Interface (GUI)
-available.  Still, Vi compatibility is maintained, those who have Vi "in the
-fingers" will feel at home.  See "runtime/doc/vi_diff.txt" for differences with
-Vi.
+Vim is an almost compatible version of the UNIX editor Vi.  Many new features
+have been added: multi-level undo, syntax highlighting, command line history,
+on-line help, filename completion, block operations, etc.  There is also a
+Graphical User Interface (GUI) available.  See "runtime/doc/vi_diff.txt" for
+differences with Vi.

-This editor is very useful for editing programs and other plain text files.
+This editor is very useful for editing programs and other plain ASCII files.
 All commands are given with normal keyboard characters, so those who can type
 with ten fingers can work very fast.  Additionally, function keys can be
-mapped to commands by the user, and the mouse can be used.
+defined by the user, and the mouse can be used.

-Vim runs under MS-Windows (NT, 2000, XP, Vista, 7, 8, 10), Macintosh, VMS and
-almost all flavours of UNIX.  Porting to other systems should not be very
-difficult.  Older versions of Vim run on MS-DOS, MS-Windows 95/98/Me, Amiga
-DOS, Atari MiNT, BeOS, RISC OS and OS/2.  These are no longer maintained.
+Vim currently runs under Amiga DOS, MS-DOS, MS-Windows 95/98/Me/NT/2000/XP,
+Atari MiNT, Macintosh, BeOS, VMS, RISC OS, OS/2 and almost all flavours of
+UNIX.  Porting to other systems should not be very difficult.


 DISTRIBUTION

-You can often use your favorite package manager to install Vim.  On Mac and
-Linux a small version of Vim is pre-installed, you still need to install Vim
-if you want more features.
-
 There are separate distributions for Unix, PC, Amiga and some other systems.
 This README.txt file comes with the runtime archive.  It includes the
 documentation, syntax files and other files that are used at runtime.  To run
@@ -36,50 +29,22 @@ Which one you need depends on the system you want to run it on and whether you
 want or must compile it yourself.  Check "http://www.vim.org/download.php" for
 an overview of currently available distributions.

-Some popular places to get the latest Vim:
-* Check out the git repository from github: https://github.com/vim/vim.
-* Get the source code as an archive: https://github.com/vim/vim/releases.
-* Get a Windows executable from the vim-win32-installer repository:
-  https://github.com/vim/vim-win32-installer/releases.
-
-
-COMPILING
-
-If you obtained a binary distribution you don't need to compile Vim.  If you
-obtained a source distribution, all the stuff for compiling Vim is in the
-"src" directory.  See src/INSTALL for instructions.
-
-
-INSTALLATION
-
-See one of these files for system-specific instructions.  Either in the
-READMEdir directory (in the repository) or the top directory (if you unpack an
-archive):
-
-README_ami.txt		Amiga
-README_unix.txt		Unix
-README_dos.txt		MS-DOS and MS-Windows
-README_mac.txt		Macintosh
-README_vms.txt		VMS
-
-There are more README_*.txt files, depending on the distribution you used.
-

 DOCUMENTATION

-The Vim tutor is a one hour training course for beginners.  Often it can be
-started as "vimtutor".  See ":help tutor" for more information.
-
 The best is to use ":help" in Vim.  If you don't have an executable yet, read
 "runtime/doc/help.txt".  It contains pointers to the other documentation
 files.  The User Manual reads like a book and is recommended to learn to use
 Vim.  See ":help user-manual".

+The vim tutor is a one hour training course for beginners.  Mostly it can be
+started as "vimtutor".  See ":help tutor" for more information.
+

 COPYING

 Vim is Charityware.  You can use and copy it as much as you like, but you are
-encouraged to make a donation to help orphans in Uganda.  Please read the file
+encouraged to make a donation to orphans in Uganda.  Please read the file
 "runtime/doc/uganda.txt" for details (do ":help uganda" inside Vim).

 Summary of the license: There are no restrictions on using or distributing an
@@ -91,22 +56,34 @@ distribute it.

 SPONSORING

-Fixing bugs and adding new features takes a lot of time and effort.  To show
-your appreciation for the work and motivate Bram and others to continue
-working on Vim please send a donation.
+Fixing bugs and adding new features takes a lot of effort.  For a few years
+Bram has attempted to do this next to a full-time job.  During that time the
+todo list kept getting longer and longer.

-Since Bram is back to a paid job the money will now be used to help children
-in Uganda.  See runtime/doc/uganda.txt.  But at the same time donations
-increase Bram's motivation to keep working on Vim!
+In order for Bram to support Vim properly he needs your help.  Through your
+donations Bram will be able to have a part-time job and spend more time on
+fixing bugs and adding new features.

 For the most recent information about sponsoring look on the Vim web site:
-
 	http://www.vim.org/sponsor/


-CONTRIBUTING
+COMPILING

-If you would like to help making Vim better, see the CONTRIBUTING.md file.
+If you obtained a binary distribution you don't need to compile Vim.  If you
+obtained a source distribution, all the stuff for compiling Vim is in the
+"src" directory.  See src/INSTALL for instructions.
+
+
+INSTALLATION
+
+See one of these files for system-specific instructions:
+README_ami.txt		Amiga
+README_unix.txt		Unix
+README_dos.txt		MS-DOS and MS-Windows
+README_os2.txt		OS/2
+README_mac.txt		Macintosh
+README_vms.txt		VMS


 INFORMATION
@@ -114,20 +91,47 @@ INFORMATION
 The latest news about Vim can be found on the Vim home page:
 	http://www.vim.org/

-If you have problems, have a look at the Vim documentation or tips:
-	http://www.vim.org/docs.php
-	http://vim.wikia.com/wiki/Vim_Tips_Wiki
+If you have problems, have a look at the Vim FAQ:
+	http://vimdoc.sf.net/vimfaq.html

-If you still have problems or any other questions, use one of the mailing
-lists to discuss them with Vim users and developers:
-	http://www.vim.org/maillist.php
-
-If nothing else works, report bugs directly:
+Send bug reports to:
 	Bram Moolenaar <Bram@vim.org>

+There are five mailing lists for Vim:
+<vim@vim.org>
+	For discussions about using existing versions of Vim: Useful mappings,
+	questions, answers, where to get a specific version, etc.
+<vim-dev@vim.org>
+	For discussions about changing Vim: New features, porting, beta-test
+	versions, etc.
+<vim-announce@vim.org>
+	Announcements about new versions of Vim; also beta-test versions and
+	ports to different systems.
+<vim-multibyte@vim.org>
+	For discussions about using and improving the multi-byte aspects of
+	Vim: XIM, Hangul, fontset, etc.
+<vim-mac@vim.org>
+	For discussions about using and improving Vim on the Macintosh.
+
+For more info and URLs of the archives see "http://www.vim.org/maillist.php".
+
+NOTE:
+- You can only send messages to these lists if you have subscribed!
+- You need to send the messages from the same location as where you subscribed
+  from (to avoid spam mail).
+- Maximum message size is 40000 characters.
+
+If you want to join a maillist, send a message to
+	<vim-help@vim.org>
+Make sure that your "From:" address is correct.  Then the list server will
+send you a help message.
+

 MAIN AUTHOR

-Send any other comments, patches, flowers and suggestions to:
+Send any other comments, patches, pizza and suggestions to:

 	Bram Moolenaar		E-mail:	Bram@vim.org
+	Clematisstraat 30
+	5925 BE  Venlo		Tel: +31 77 387 2340
+	The Netherlands		Fax/voice-mail: +31 20 773 8272
@@ -1,136 +0,0 @@
-`README.md` for version 8.0 of Vim: Vi IMproved.
-[![Build Status](https://travis-ci.org/vim/vim.svg?branch=master)](https://travis-ci.org/vim/vim)
-[![Coverage Status](https://coveralls.io/repos/vim/vim/badge.svg?branch=master&service=github)](https://coveralls.io/github/vim/vim?branch=master)
-[![Appveyor Build status](https://ci.appveyor.com/api/projects/status/o2qht2kjm02sgghk?svg=true)](https://ci.appveyor.com/project/chrisbra/vim)
-[![Coverity Scan](https://scan.coverity.com/projects/241/badge.svg)](https://scan.coverity.com/projects/vim)
-
-
-## What is Vim? ##
-
-Vim is a greatly improved version of the good old UNIX editor Vi.  Many new
-features have been added: multi-level undo, syntax highlighting, command line
-history, on-line help, spell checking, filename completion, block operations,
-script language, etc.  There is also a Graphical User Interface (GUI)
-available.  Still, Vi compatibility is maintained, those who have Vi "in the
-fingers" will feel at home.  See `runtime/doc/vi_diff.txt` for differences with
-Vi.
-
-This editor is very useful for editing programs and other plain text files.
-All commands are given with normal keyboard characters, so those who can type
-with ten fingers can work very fast.  Additionally, function keys can be
-mapped to commands by the user, and the mouse can be used.
-
-Vim runs under MS-Windows (NT, 2000, XP, Vista, 7, 8, 10), Macintosh, VMS and
-almost all flavours of UNIX.  Porting to other systems should not be very
-difficult.  Older versions of Vim run on MS-DOS, MS-Windows 95/98/Me, Amiga
-DOS, Atari MiNT, BeOS, RISC OS and OS/2.  These are no longer maintained.
-
-
-## Distribution ##
-
-You can often use your favorite package manager to install Vim.  On Mac and
-Linux a small version of Vim is pre-installed, you still need to install Vim
-if you want more features.
-
-There are separate distributions for Unix, PC, Amiga and some other systems.
-This `README.md` file comes with the runtime archive.  It includes the
-documentation, syntax files and other files that are used at runtime.  To run
-Vim you must get either one of the binary archives or a source archive.
-Which one you need depends on the system you want to run it on and whether you
-want or must compile it yourself.  Check http://www.vim.org/download.php for
-an overview of currently available distributions.
-
-Some popular places to get the latest Vim:
-* Check out the git repository from [github](https://github.com/vim/vim).
-* Get the source code as an [archive](https://github.com/vim/vim/releases).
-* Get a Windows executable from the
-[vim-win32-installer](https://github.com/vim/vim-win32-installer/releases) repository.
-
-
-
-## Compiling ##
-
-If you obtained a binary distribution you don't need to compile Vim.  If you
-obtained a source distribution, all the stuff for compiling Vim is in the
-`src` directory.  See `src/INSTALL` for instructions.
-
-
-## Installation ##
-
-See one of these files for system-specific instructions.  Either in the
-READMEdir directory (in the repository) or the top directory (if you unpack an
-archive):
-
-	README_ami.txt		Amiga
-	README_unix.txt		Unix
-	README_dos.txt		MS-DOS and MS-Windows
-	README_mac.txt		Macintosh
-	README_vms.txt		VMS
-
-There are other `README_*.txt` files, depending on the distribution you used.
-
-
-## Documentation ##
-
-The Vim tutor is a one hour training course for beginners.  Often it can be
-started as `vimtutor`.  See `:help tutor` for more information.
-
-The best is to use `:help` in Vim.  If you don't have an executable yet, read
-`runtime/doc/help.txt`.  It contains pointers to the other documentation
-files.  The User Manual reads like a book and is recommended to learn to use
-Vim.  See `:help user-manual`.
-
-
-## Copying ##
-
-Vim is Charityware.  You can use and copy it as much as you like, but you are
-encouraged to make a donation to help orphans in Uganda.  Please read the file
-`runtime/doc/uganda.txt` for details (do `:help uganda` inside Vim).
-
-Summary of the license: There are no restrictions on using or distributing an
-unmodified copy of Vim.  Parts of Vim may also be distributed, but the license
-text must always be included.  For modified versions a few restrictions apply.
-The license is GPL compatible, you may compile Vim with GPL libraries and
-distribute it.
-
-
-## Sponsoring ##
-
-Fixing bugs and adding new features takes a lot of time and effort.  To show
-your appreciation for the work and motivate Bram and others to continue
-working on Vim please send a donation.
-
-Since Bram is back to a paid job the money will now be used to help children
-in Uganda.  See `runtime/doc/uganda.txt`.  But at the same time donations
-increase Bram's motivation to keep working on Vim!
-
-For the most recent information about sponsoring look on the Vim web site:
-	http://www.vim.org/sponsor/
-
-
-## Contributing ##
-
-If you would like to help making Vim better, see the [CONTRIBUTING.md](https://github.com/vim/vim/blob/master/CONTRIBUTING.md) file.
-
-
-## Information ##
-
-The latest news about Vim can be found on the Vim home page:
-	http://www.vim.org/
-
-If you have problems, have a look at the Vim documentation or tips:
-	http://www.vim.org/docs.php
-	http://vim.wikia.com/wiki/Vim_Tips_Wiki
-
-If you still have problems or any other questions, use one of the mailing
-lists to discuss them with Vim users and developers:
-	http://www.vim.org/maillist.php
-
-If nothing else works, report bugs directly:
-	Bram Moolenaar <Bram@vim.org>
-
-
-## Main author ##
-
-Send any other comments, patches, flowers and suggestions to:
-	Bram Moolenaar <Bram@vim.org>
@@ -1,23 +0,0 @@
-Vim		Vi IMproved.  A clone of the UNIX text editor Vi.  Very useful
-		for editing programs and other plain ASCII text.  Full Vi
-		compatibility and includes all Ex commands.  Extra features
-		above Vi: Multilevel undo, multiple windows, syntax
-		highlighting, command line history, folding, improved command
-		line editing, command typeahead display, command to display
-		yank buffers, possibility to edit binary files, file name
-		stack, support for Manx QuickFix and other compiler's error
-		messages, shows current file name in window title, on-line
-		help, rectangular cut/paste, etc., etc., etc...
-
-		Version 8.1.  Also runs under UNIX, MS-Windows, Mac, etc.
-		vim81rt.tgz  contains the documentation and syntax files.
-		vim81bin.tgz contains the binaries.
-		vim81src.tgz contains the sources.
-		Author: Bram Moolenaar et al.
-
-
-Xxd		Hex dumper and reader.  Can be used to view files as hex, edit
-		them and write them back.  Can also be used to patch files.
-
-		Version 1.10 (1997 May 22)
-		Author: Juergen Weigert
@@ -1,32 +0,0 @@
-README_ami.txt for version 8.1 of Vim: Vi IMproved.
-
-This file explains the installation of Vim on Amiga systems.
-See README.txt for general information about Vim.
-
-
-Unpack the distributed files in the place where you want to keep them.  It is
-wise to have a "vim" directory to keep your vimrc file and any other files you
-change.  The distributed files go into a subdirectory.  This way you can
-easily upgrade to a new version.  For example:
-
-  dh0:editors/vim		contains your vimrc and modified files
-  dh0:editors/vim/vim54		contains the Vim version 5.4 distributed files
-  dh0:editors/vim/vim55		contains the Vim version 5.5 distributed files
-
-You would then unpack the archives like this:
-
-  cd dh0:editors
-  tar xf t:vim81bin.tar
-  tar xf t:vim81rt.tar
-
-Set the $VIM environment variable to point to the top directory of your Vim
-files.  For the above example:
-
-  set VIM=dh0:editors/vim
-
-Vim version 5.4 will look for your vimrc file in $VIM, and for the runtime
-files in $VIM/vim54.  See ":help $VIM" for more information.
-
-Make sure the Vim executable is in your search path.  Either copy the Vim
-executable to a directory that is in your search path, or (preferred) modify
-the search path to include the directory where the Vim executable is.
@@ -1,12 +0,0 @@
-README_amibin.txt for version 8.1 of Vim: Vi IMproved.
-
-See "README.txt" for general information about Vim.
-See "README_ami.txt" for installation instructions for the Amiga.
-These files are in the runtime archive (vim81rt.tgz).
-
-
-The Amiga "bin" archive contains the Vim executable for the Amiga.  It was
-compiled with "big" features.
-
-Postscript printing is not included to avoid requiring floating point
-computations.
@@ -1,11 +0,0 @@
-README_amisrc.txt for version 8.1 of Vim: Vi IMproved.
-
-See "README.txt" for general information about Vim.
-See "README_ami.txt" for installation instructions for the Amiga.
-These files are in the runtime archive (vim81rt.tgz).
-
-
-The Amiga source archive contains the files needed to compile Vim on the
-Amiga.
-
-See "src/INSTALLami.txt" for instructions on how to compile Vim on the Amiga.
@@ -1,16 +0,0 @@
-README_bindos.txt for version 8.1 of Vim: Vi IMproved.
-
-See "README.txt" for general information about Vim.
-See "README_dos.txt" for installation instructions for MS-DOS and MS-Windows.
-These files are in the runtime archive (vim81rt.zip).
-
-
-There are several binary distributions of Vim for the PC.  You would normally
-pick only one of them, but it's also possible to install several.
-These ones are available (the version number may differ):
-	vim81w32.zip	Windows 95/98/NT/etc. console version
-	gvim81.zip	Windows 95/98/NT/etc. GUI version
-	gvim81ole.zip	Windows 95/98/NT/etc. GUI version with OLE
-
-You MUST also get the runtime archive (vim81rt.zip).
-The sources are also available (vim81src.zip).
@@ -1,154 +0,0 @@
-README_dos.txt for version 8.1 of Vim: Vi IMproved.
-
-This file explains the installation of Vim on MS-DOS and MS-Windows systems.
-See "README.txt" for general information about Vim.
-
-There are two ways to install Vim:
-A. Use the self-installing .exe file.
-B. Unpack .zip files and run the install.exe program.
-
-
-A. Using the self-installing .exe
---------------------------------
-
-This is mostly self-explaining.  Just follow the prompts and make the
-selections.  A few things to watch out for:
-
- When an existing installation is detected, you are offered to first remove
-  this.  The uninstall program is then started while the install program waits
-  for it to complete.  Sometimes the windows overlap each other, which can be
-  confusing.  Be sure the complete the uninstalling before continuing the
-  installation.  Watch the taskbar for uninstall windows.
-
- When selecting a directory to install Vim, use the same place where other
-  versions are located.  This makes it easier to find your _vimrc file.  For
-  example "C:\Program Files\vim" or "D:\vim".  A name ending in "vim" is
-  preferred.
-
- After selecting the directory where to install Vim, clicking on "Next" will
-  start the installation.
-
-
-B. Using .zip files
-------------------
-
-These are the normal steps to install Vim from the .zip archives:
-
-1. Go to the directory where you want to put the Vim files.  Examples:
-	cd C:\
-	cd D:\editors
-   If you already have a "vim" directory, go to the directory in which it is
-   located.  Check the $VIM setting to see where it points to:
-	set VIM
-   For example, if you have
-	C:\vim\vim81
-   do
-	cd C:\
-   Binary and runtime Vim archives are normally unpacked in the same location,
-   on top of each other.
-
-2. Unpack the zip archives.  This will create a new directory "vim\vim81",
-   in which all the distributed Vim files are placed.  Since the directory
-   name includes the version number, it is unlikely that you overwrite
-   existing files.
-   Examples:
-	pkunzip -d gvim81.zip
-	unzip vim81w32.zip
-
-   You need to unpack the runtime archive and at least one of the binary
-   archives.  When using more than one binary version, be careful not to
-   overwrite one version with the other, the names of the executables
-   "vim.exe" and "gvim.exe" are the same.
-
-   After you unpacked the files, you can still move the whole directory tree
-   to another location.  That is where they will stay, the install program
-   won't move or copy the runtime files.
-
-   Only for the 32 bit DOS version on MS-DOS without DPMI support (trying to
-   run install.exe will produce an error message): Unpack the CSDPMI4B.ZIP
-   archive and follow the instructions in the documentation.
-
-3. Change to the new directory:
-	cd vim\vim81
-   Run the "install.exe" program.  It will ask you a number of questions about
-   how you would like to have your Vim setup.  Among these are:
-   - You can tell it to write a "_vimrc" file with your preferences in the
-     parent directory.
-   - It can also install an "Edit with Vim" entry in the Windows Explorer
-     popup menu.
-   - You can have it create batch files, so that you can run Vim from the
-     console or in a shell.  You can select one of the directories in your
-     $PATH.  If you skip this, you can add Vim to the search path manually:
-     The simplest is to add a line to your autoexec.bat.  Examples:
-	set path=%path%;C:\vim\vim81
-	set path=%path%;D:\editors\vim\vim81
-   - Create entries for Vim on the desktop and in the Start menu.
-
-That's it!
-
-
-Remarks:
-
- If Vim can't find the runtime files, ":help" won't work and the GUI version
-  won't show a menubar.  Then you need to set the $VIM environment variable to
-  point to the top directory of your Vim files.  Example:
-    set VIM=C:\editors\vim
-  Vim version 8.1 will look for your vimrc file in $VIM, and for the runtime
-  files in $VIM/vim81.  See ":help $VIM" for more information.
-
- To avoid confusion between distributed files of different versions and your
-  own modified vim scripts, it is recommended to use this directory layout:
-  ("C:\vim" is used here as the root, replace it with the path you use)
-  Your own files:
-	C:\vim\_vimrc			Your personal vimrc.
-	C:\vim\_viminfo			Dynamic info for 'viminfo'.
-	C:\vim\vimfiles\ftplugin\*.vim	Filetype plugins
-	C:\vim\...			Other files you made.
-  Distributed files:
-	C:\vim\vim81\vim.exe		The Vim version 8.1 executable.
-	C:\vim\vim81\doc\*.txt		The version 8.1 documentation files.
-	C:\vim\vim81\bugreport.vim	A Vim version 8.1 script.
-	C:\vim\vim81\...		Other version 8.1 distributed files.
-  In this case the $VIM environment variable would be set like this:
-	set VIM=C:\vim
-  Then $VIMRUNTIME will automatically be set to "$VIM\vim81".  Don't add
-  "vim81" to $VIM, that won't work.
-
- You can put your Vim executable anywhere else.  If the executable is not
-  with the other Vim files, you should set $VIM. The simplest is to add a line
-  to your autoexec.bat.  Examples:
-	set VIM=c:\vim
-	set VIM=d:\editors\vim
-
- If you have told the "install.exe" program to add the "Edit with Vim" menu
-  entry, you can remove it by running the "uninstal.exe".  See
-  ":help win32-popup-menu".
-
- In Windows 95/98/NT you can create a shortcut to Vim.  This works for all
-  DOS and Win32 console versions.  For the console version this gives you the
-  opportunity to set defaults for the Console where Vim runs in.
-
-  1. On the desktop, click right to get a menu.  Select New/Shortcut.
-  2. In the dialog, enter Command line: "C:\command.com".  Click "Next".
-  3. Enter any name.  Click "Finish".
-     The new shortcut will appear on the desktop.
-  4. With the mouse pointer on the new shortcut, click right to get a menu.
-     Select Properties.
-  5. In the Program tab, change the "Cmdline" to add "/c" and the name of the
-     Vim executable.  Examples:
-	C:\command.com /c C:\vim\vim81\vim.exe
-	C:\command.com /c D:\editors\vim\vim81\vim.exe
-  6. Select the font, window size, etc. that you like.  If this isn't
-     possible, select "Advanced" in the Program tab, and deselect "MS-DOS
-     mode".
-  7. Click OK.
-
-  For gvim, you can use a normal shortcut on the desktop, and set the size of
-  the Window in your $VIM/_gvimrc:
-	set lines=30 columns=90
-
-
-For further information, type one of these inside Vim:
-	:help dos
-	:help msdos
-	:help win32
@@ -1,53 +0,0 @@
-README_extra.txt for version 8.1 of Vim: Vi IMproved.
-
-These extra files of Vim are for special purposes.  This README explains what
-the files are for.  For general information about Vim, see the "README.txt"
-file.
-
-
-farsi/*			Files for the Farsi (persian) language.  If you don't
-			know what Farsi is, this is not for you.
-
-src/if_sniff.*		Interface to SNiFF.  If you don't know what SNiFF is,
-			this is not for you.
-
-src/os_amiga.*		Files for the Amiga port.
-
-src/gui_beos.*
-src/os_beos.*		Files for the BeOS port.
-
-src/os_msdos.*
-src/os_dos.*		Files for the MS-DOS port.
-
-src/gui_mac.*           Carbon GUI (not used)
-src/os_mac*		Shared files for the different Mac ports.
-
-src/MacVim/*		Files for the MacVim port.
-
-src/os_mint.8		Files for the Atari Mint port.
-
-src/os_os2*		Files for the OS/2 port.
-src/tee/*		Extra program for OS/2.
-
-src/os_vms*		Files for the VMS port.
-
-src/os_w32*
-src/os_win32.*		Files for the Win32 port.
-
-src/gui_w32.*		Files for the Win32 GUI.
-src/gui_w48.*		Files for the Win32 and Win16 GUI.
-src/Make_mvc.mak	MS Visual C++ makefile for the Win32 GUI.
-runtime/rgb.txt		File with color definitions for the Win32 GUI.
-
-src/if_ole.*		OLE automation interface, for MS Windows 95 and NT.
-
-src/VisVim/*		Integration of Win32 GUI with MS Visual Developer
-			Studio.
-
-src/GvimExt/*		DLL for the "Edit with Vim" context menu entry
-
-nsis/*			NSIS script to build the self-installing MS-Windows exe
-
-runtime/doc/*.man	Preprocessed manual pages.
-
-runtime/macros/file_select.vim	Vim script to browse directories (Unix only).
@@ -1,13 +0,0 @@
-README_mac.txt for version 8.1 of Vim: Vi IMproved.
-
-How to install MacVim?
-========================
-
-Download MacVim.dmg from latest binary release page https://github.com/macvim-dev/macvim/releases/latest , open the dmg file, and copy MacVim.app to /Applications.
-
-
-Questions?
-========================
-
-Please take a look at the home page http://macvim-dev.github.io/macvim/
-
@@ -1,20 +0,0 @@
-README_ole.txt for version 8.1 of Vim: Vi IMproved.
-
-This archive contains gvim.exe with OLE interface and VisVim.
-This version of gvim.exe can also load a number of interface dynamically (you
-can optionally install the .dll files for each interface).
-It is only for MS-Windows 95/98/ME/NT/2000/XP.
-
-Also see the README_bindos.txt, README_dos.txt and README.txt files.
-
-Be careful not to overwrite the OLE gvim.exe with the non-OLE gvim.exe when
-unpacking another binary archive!  Check the output of ":version":
-	Win32s - "MS-Windows 16/32 bit GUI version"
-	 Win32 - "MS-Windows 32 bit GUI version"
-Win32 with OLE - "MS-Windows 32 bit GUI version with OLE support"
-
-For further information, type this inside Vim:
-	:help if_ole
-
-Furthermore, this archive contains VISVIM.DLL.  It can be used to integrate
-the OLE gvim with Microsoft Visual Developer Studio.  See VisVim/README.txt.
@@ -1,5 +0,0 @@
-README_os2.txt for version 8.1 of Vim: Vi IMproved.
-
-This file used to explain the installation of Vim on OS/2 systems.
-However, support for OS/2 has been removed in patch 7.4.1008.
-See "README.txt" for general information about Vim.
@@ -1,117 +0,0 @@
-README_zOS.txt for version 8.1 of Vim: Vi IMproved.
-
-This readme explains how to build Vim on z/OS.  Formerly called OS/390.
-See "README.txt" for general information about Vim.
-
-Most likely there are not many users out there using Vim on z/OS. So chances
-are good, that some bugs are still undiscovered.
-
-Getting the source to z/OS:
-==========================
-
-First get the source code in one big tar file and ftp it a binary to z/OS. If
-the tar file is initially compressed with gzip (tar.gz) or bzip2 (tar.bz2)
-uncompress it on your PC, as this tools are (most likely) not available on the
-mainframe.
-
-To reduce the size of the tar file you might compress it into a zip file. On
-z/OS Unix you might have the command "jar" from java to uncompress a zip. Use:
-        jar xvf <zip file name>
-
-Unpack the tar file on z/OS with 
-        pax -o from=ISO8859-1,to=IBM-1047 -rf vim.tar
-
-Note: The Vim source contains a few bitmaps etc which will be destroyed by
-this command, but these files are not needed on zOS (at least not for the
-console version).
-
-
-Compiling:
-==========
-
-Vim can be compiled with or without GUI support. For 7.4 only the compilation
-without GUI was tested. Below is a section about compiling with X11 but this
-is from an earlier version of Vim.
-
-Console only:
-------------
-
-If you build VIM without X11 support, compiling and building is nearly
-straightforward. 
-
-Change to the vim directory and do:
-
-    # Don't use c89!
-    # Allow intermixing of compiler options and files.
-
-    $ export CC=cc
-    $ export _CC_CCMODE=1
-    $./configure --with-features=big --without-x --enable-gui=no
-    $ cd src
-    $ make
-
-      There may be warnings:
-        - include files not found (libc, sys/param.h, ...)
-        - Redeclaration of ... differs from ...
-        -- just ignore them.
-
-    $ make test
-
-      This will produce lots of garbage on your screen (including error
-      messages). Don't worry.
-
-      If the test stops at one point in vim (might happen in test 11), just
-      press :q!
-
-      Expected test failures:
-        11: If you don't have gzip installed
-        24: test of backslash sequences in regexp are ASCII dependent
-        42: Multibyte is not supported on z/OS
-        55: ASCII<->EBCDIC sorting
-        57: ASCII<->EBCDIC sorting
-        58: Spell checking is not supported with EBCDIC
-        71: Blowfish encryption doesn't work
-
-    $ make install
-
-
-With X11:
---------
-
-WARNING: This instruction was not tested with Vim 7.4 or later.
-
-There are two ways for building VIM with X11 support. The first way is simple
-and results in a big executable (~13 Mb), the second needs a few additional
-steps and results in a much smaller executable (~4.5 Mb). This examples assume
-you want Motif.
-
-  The easy way:
-    $ export CC=cc
-    $ export _CC_CCMODE=1
-    $ ./configure --enable-max-features --enable-gui=motif
-    $ cd src
-    $ make
-
-    With this VIM is linked statically with the X11 libraries.
-
-  The smarter way:
-    Make VIM as described above. Then create a file named 'link.sed' with the
-    following content (see src/link.390):
-
-	s/-lXext  *//g
-	s/-lXmu  *//g
-	s/-lXm	*/\/usr\/lib\/Xm.x /g
-	s/-lX11  */\/usr\/lib\/X11.x /g
-	s/-lXt	*//g
-	s/-lSM	*/\/usr\/lib\/SM.x /g
-	s/-lICE  */\/usr\/lib\/ICE.x /g
-
-    Then do:
-    $ rm vim
-    $ make
-
-    Now Vim is linked with the X11-DLLs.
-
-    See the Makefile and the file link.sh on how link.sed is used.
-
-
@@ -1,8 +0,0 @@
-README_src.txt for version 8.1 of Vim: Vi IMproved.
-
-The source archive contains the files needed to compile Vim on Unix systems.
-It is packed for Unix systems (NL line separator).
-
-For more information, see the README.txt file that comes with the runtime
-archive (vim-8.1-rt.tar.gz).  To be able to run Vim you MUST get the runtime
-archive too!
@@ -1,12 +0,0 @@
-README_srcdos.txt for version 8.1 of Vim: Vi IMproved.
-
-See "README.txt" for general information about Vim.
-See "README_dos.txt" for installation instructions for MS-DOS and MS-Windows.
-These files are in the runtime archive (vim81rt.zip).
-
-
-The DOS source archive contains the files needed to compile Vim on MS-DOS or
-MS-Windows.  It is packed for DOS systems, with CR-LF.  It also includes the
-VisVim sources.
-
-See "src/INSTALLpc.txt" for instructions on how to compile Vim on the PC.
@@ -1,10 +0,0 @@
-README_unix.txt for version 8.1 of Vim: Vi IMproved.
-
-This file explains the installation of Vim on Unix systems.
-See "README.txt" for general information about Vim.
-
-
-When you use the source distribution, "make install" is used to install Vim.
-See the "INSTALL" file in the "src" directory.
-
-If you use a compiled package, follow the instructions for the package.
@@ -1,48 +0,0 @@
-README_vms.txt for version 8.1 of Vim: Vi IMproved.
-
-This file explains the installation of Vim on VMS systems.
-See "README.txt" in the runtime archive for information about Vim.
-
-
-Most information can be found in the on-line documentation.  Use ":help vms"
-inside Vim.  Or get the runtime files and read runtime/doc/os_vms.txt to find
-out how to install and configure Vim with runtime files etc.
-
-To compile Vim yourself you need three archives:
-  vim-X.X-rt.tar.gz	runtime files
-  vim-X.X-src.tar.gz	source files
-  vim-X.X-extra.tar.gz	extra source files
-
-Compilation is recommended, in order to make sure that the correct
-libraries are used for your specific system.  Read about compiling in
-src/INSTALLvms.txt.
-
-To use the binary version, you need one of these archives:
-
-  vim-XX-exe-ia64-gui.zip       IA64 GUI/Motif executables
-  vim-XX-exe-ia64-gtk.zip       IA64 GUI/GTK executables
-  vim-XX-exe-ia64-term.zip      IA64 console executables
-  vim-XX-exe-axp-gui.zip	Alpha GUI/Motif executables
-  vim-XX-exe-axp-gtk.zip	Alpha GUI/GTK executables
-  vim-XX-exe-axp-term.zip       Alpha console executables
-  vim-XX-exe-vax-gui.zip	VAX GUI executables
-  vim-XX-exe-vax-term.zip       VAX console executables
-
-and of course
-  vim-XX-runtime.zip		runtime files
-
-The binary archives contain: vim.exe, ctags.exe, xxd.exe files,
-but there are also prepared "deploy ready" archives:
-
-vim-XX-ia64.zip			GUI and console executables with runtime and
-				help files for IA64 systems
-vim-XX-axp.zip			GUI and console executables with runtime and
-				help files for Alpha systems
-vim-XX-vax.zip			GUI and console executables with runtime and
-				help files for VAX systems
-
-GTK builds need LIBGTK library installed.
-
-These executables and up to date patches for OpenVMS system are downloadable
-from http://www.polarhome.com/vim/ or ftp://ftp.polarhome.com/pub/vim/
-
@@ -1,15 +0,0 @@
-README_w32s.txt for version 8.1 of Vim: Vi IMproved.
-
-This archive contains the gvim.exe that was specifically compiled for use in
-the Win32s subsystem in MS-Windows 3.1 and 3.11.
-
-Also see the README_bindos.txt, README_dos.txt and README.txt files.
-
-Be careful not to overwrite the Win32s gvim.exe with the another gvim.exe when
-unpacking another binary archive!  Check the output of ":version":
-	Win32s - "MS-Windows 16/32 bit GUI version"
-	 Win32 - "MS-Windows 32 bit GUI version"
-Win32 with OLE - "MS-Windows 32 bit GUI version with OLE support"
-
-For further information, type this inside Vim:
-	:help win32s
@@ -1,33 +0,0 @@
-version: "{build}"
-
-skip_tags: true
-
-environment:
-  matrix:
-    - FEATURE: HUGE
-    - FEATURE: NORMAL
-# disabled
-#    - FEATURE: TINY
-#    - FEATURE: SMALL
-#    - FEATURE: BIG
-
-matrix:
-  fast_finish: true
-
-before_build:
-  - '"C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin\SetEnv.cmd" /x64 /release'
-  - 'set INCLUDE=%INCLUDE%C:\Program Files (x86)\Windows Kits\8.1\Include\um'
-
-build_script:
-  - src/appveyor.bat
-
-test_script:
-  - cd src/testdir
-    # Testing with MSVC gvim
-  - path C:\Python35-x64;%PATH%
-  - nmake -f Make_dos.mak VIMPROG=..\gvim
-  - nmake -f Make_dos.mak clean
-    # Testing with MingW console version
-  - nmake -f Make_dos.mak VIMPROG=..\vim
-
-# vim: sw=2 sts=2 et ts=8 sr
@@ -1,6 +0,0 @@
-#! /bin/sh
-
-# This is just a stub for the Unix configure script, to provide support for
-# doing "./configure" in the top Vim directory.
-
-cd src && exec ./configure "$@"
@@ -1,2 +0,0 @@
-For information about installation of Farsi fonts and Vim usage in Farsi mode,
-refer to the Farsi help file by typing ":help farsi" in Vim.
@@ -1,70 +0,0 @@
-This builds a one-click install for Vim for Win32 using the Nullsoft
-Installation System (NSIS), available at http://nsis.sourceforge.net/
-
-To build the installable .exe:
-
-1.  Unpack three archives:
-	PC sources
-	PC runtime
-	PC language files
-    You can generate these from the Unix sources and runtime plus the extra
-    archive (see the Makefile in the top directory).
-
-2.  Go to the src directory and build:
-	gvim.exe (the OLE version),
-	vimrun.exe,
-	install.exe,
-	uninstal.exe,
-	xxd/xxd.exe,
-
-    Then execute tools/rename.bat to rename the executables. (mv command is
-    required.)
-
-3.  Go to the GvimExt directory and build gvimext.dll (or get it from a binary
-    archive).  Both 64- and 32-bit versions are needed and should be placed
-    as follows:
-	64-bit: src/GvimExt/gvimext64.dll
-	32-bit: src/GvimExt/gvimext.dll
-
-4.  Go to the VisVim directory and build VisVim.dll (or get it from a binary
-    archive).
-
-5.  Go to the OleVim directory and build OpenWithVim.exe and SendToVim.exe (or
-    get them from a binary archive).
-
-6.  Get a "diff.exe" program and put it in the "../.." directory (above the
-    "vim80" directory, it's the same for all Vim versions).
-    You can find one in previous Vim versions or in this archive:
-		http://www.mossbayeng.com/~ron/vim/diffutils.tar.gz
-    Also put winpty32.dll and winpty-agent.exe there.
-
-7.  Do "make uganda.nsis.txt" in runtime/doc.  This requires sed, you may have
-    to do this on Unix.  Make sure the file is in DOS file format!
-
-8.  Get gettext and iconv DLLs from the following site:
-	https://github.com/mlocati/gettext-iconv-windows/releases
-    Both 64- and 32-bit versions are needed.
-    Download the files gettextX.X.X.X-iconvX.XX-shared-{32,64}.zip, extract
-    DLLs and place them as follows:
-
-	<GETTEXT directory>
-	    |
-	    + gettext32/
-	    |	libintl-8.dll
-	    |	libiconv-2.dll
-	    |	libgcc_s_sjlj-1.dll
-	    |
-	    ` gettext64/
-		libintl-8.dll
-		libiconv-2.dll
-
-    The default <GETTEXT directory> is "..", however, you can change it by
-    passing /DGETTEXT=... option to the makensis command.
-
-
-Install NSIS if you didn't do that already.
-Also install UPX, if you want a compressed file.
-
-To build then, enter:
-
-	makensis gvim.nsi
@@ -1,613 +0,0 @@
-# NSIS file to create a self-installing exe for Vim.
-# It requires NSIS version 2.0 or later.
-# Last Change:	2014 Nov 5
-
-# WARNING: if you make changes to this script, look out for $0 to be valid,
-# because uninstall deletes most files in $0.
-
-# Location of gvim_ole.exe, vimw32.exe, GvimExt/*, etc.
-!ifndef VIMSRC
-  !define VIMSRC "..\src"
-!endif
-
-# Location of runtime files
-!ifndef VIMRT
-  !define VIMRT ".."
-!endif
-
-# Location of extra tools: diff.exe
-!ifndef VIMTOOLS
-  !define VIMTOOLS ..\..
-!endif
-
-# Location of gettext.
-# It must contain two directories: gettext32 and gettext64.
-# See README.txt for detail.
-!ifndef GETTEXT
-  !define GETTEXT ${VIMRT}
-!endif
-
-# Comment the next line if you don't have UPX.
-# Get it at https://upx.github.io/
-!define HAVE_UPX
-
-# comment the next line if you do not want to add Native Language Support
-!define HAVE_NLS
-
-!include gvim_version.nsh	# for version number
-
-# ----------- No configurable settings below this line -----------
-
-!include UpgradeDLL.nsh		# for VisVim.dll
-!include LogicLib.nsh
-!include x64.nsh
-
-Name "Vim ${VER_MAJOR}.${VER_MINOR}"
-OutFile gvim${VER_MAJOR}${VER_MINOR}.exe
-CRCCheck force
-SetCompressor /SOLID lzma
-SetDatablockOptimize on
-RequestExecutionLevel highest
-XPStyle on
-
-ComponentText "This will install Vim ${VER_MAJOR}.${VER_MINOR} on your computer."
-DirText "Choose a directory to install Vim (should contain 'vim')"
-Icon icons\vim_16c.ico
-# NSIS2 uses a different strategy with six different images in a strip...
-#EnabledBitmap icons\enabled.bmp
-#DisabledBitmap icons\disabled.bmp
-UninstallText "This will uninstall Vim ${VER_MAJOR}.${VER_MINOR} from your system."
-UninstallIcon icons\vim_uninst_16c.ico
-
-# On NSIS 2 using the BGGradient causes trouble on Windows 98, in combination
-# with the BringToFront.
-# BGGradient 004000 008200 FFFFFF
-LicenseText "You should read the following before installing:"
-LicenseData ${VIMRT}\doc\uganda.nsis.txt
-
-!ifdef HAVE_UPX
-  !packhdr temp.dat "upx --best --compress-icons=1 temp.dat"
-!endif
-
-# This adds '\vim' to the user choice automagically.  The actual value is
-# obtained below with ReadINIStr.
-InstallDir "$PROGRAMFILES\Vim"
-
-# Types of installs we can perform:
-InstType Typical
-InstType Minimal
-InstType Full
-
-SilentInstall normal
-
-# These are the pages we use
-Page license
-Page components
-Page custom SetCustom ValidateCustom ": _vimrc setting"
-Page directory "" "" CheckInstallDir
-Page instfiles
-UninstPage uninstConfirm
-UninstPage instfiles
-
-# Reserve files
-# Needed for showing the _vimrc setting page faster.
-ReserveFile /plugin InstallOptions.dll
-ReserveFile vimrc.ini
-
-##########################################################
-# Functions
-
-Function .onInit
-  MessageBox MB_YESNO|MB_ICONQUESTION \
-	"This will install Vim ${VER_MAJOR}.${VER_MINOR} on your computer.$\n Continue?" \
-	/SD IDYES \
-	IDYES NoAbort
-	    Abort ; causes installer to quit.
-	NoAbort:
-
-  # run the install program to check for already installed versions
-  SetOutPath $TEMP
-  File /oname=install.exe ${VIMSRC}\installw32.exe
-  ExecWait "$TEMP\install.exe -uninstall-check"
-  Delete $TEMP\install.exe
-
-  # We may have been put to the background when uninstall did something.
-  BringToFront
-
-  # Install will have created a file for us that contains the directory where
-  # we should install.  This is $VIM if it's set.  This appears to be the only
-  # way to get the value of $VIM here!?
-  ReadINIStr $INSTDIR $TEMP\vimini.ini vimini dir
-  Delete $TEMP\vimini.ini
-
-  # If ReadINIStr failed or did not find a path: use the default dir.
-  StrCmp $INSTDIR "" 0 IniOK
-  StrCpy $INSTDIR "$PROGRAMFILES\Vim"
-  IniOK:
-
-  # Should check for the value of $VIM and use it.  Unfortunately I don't know
-  # how to obtain the value of $VIM
-  # IfFileExists "$VIM" 0 No_Vim
-  #   StrCpy $INSTDIR "$VIM"
-  # No_Vim:
-
-  # User variables:
-  # $0 - holds the directory the executables are installed to
-  # $1 - holds the parameters to be passed to install.exe.  Starts with OLE
-  #      registration (since a non-OLE gvim will not complain, and we want to
-  #      always register an OLE gvim).
-  # $2 - holds the names to create batch files for
-  StrCpy $0 "$INSTDIR\vim${VER_MAJOR}${VER_MINOR}"
-  StrCpy $1 "-register-OLE"
-  StrCpy $2 "gvim evim gview gvimdiff vimtutor"
-
-  # Extract InstallOptions files
-  # $PLUGINSDIR will automatically be removed when the installer closes
-  InitPluginsDir
-  File /oname=$PLUGINSDIR\vimrc.ini "vimrc.ini"
-FunctionEnd
-
-Function .onUserAbort
-  MessageBox MB_YESNO|MB_ICONQUESTION "Abort install?" IDYES NoCancelAbort
-    Abort ; causes installer to not quit.
-  NoCancelAbort:
-FunctionEnd
-
-# We only accept the directory if it ends in "vim".  Using .onVerifyInstDir has
-# the disadvantage that the browse dialog is difficult to use.
-Function CheckInstallDir
-FunctionEnd
-
-Function .onInstSuccess
-  WriteUninstaller vim${VER_MAJOR}${VER_MINOR}\uninstall-gui.exe
-  MessageBox MB_YESNO|MB_ICONQUESTION \
-	"The installation process has been successful. Happy Vimming! \
-	$\n$\n Do you want to see the README file now?" IDNO NoReadme
-      Exec '$0\gvim.exe -R "$0\README.txt"'
-  NoReadme:
-FunctionEnd
-
-Function .onInstFailed
-  MessageBox MB_OK|MB_ICONEXCLAMATION "Installation failed. Better luck next time."
-FunctionEnd
-
-Function un.onUnInstSuccess
-  MessageBox MB_OK|MB_ICONINFORMATION \
-  "Vim ${VER_MAJOR}.${VER_MINOR} has been (partly) removed from your system"
-FunctionEnd
-
-Function un.GetParent
-  Exch $0 ; old $0 is on top of stack
-  Push $1
-  Push $2
-  StrCpy $1 -1
-  loop:
-    StrCpy $2 $0 1 $1
-    StrCmp $2 "" exit
-    StrCmp $2 "\" exit
-    IntOp $1 $1 - 1
-  Goto loop
-  exit:
-    StrCpy $0 $0 $1
-    Pop $2
-    Pop $1
-    Exch $0 ; put $0 on top of stack, restore $0 to original value
-FunctionEnd
-
-##########################################################
-Section "Vim executables and runtime files"
-	SectionIn 1 2 3 RO
-
-	# we need also this here if the user changes the instdir
-	StrCpy $0 "$INSTDIR\vim${VER_MAJOR}${VER_MINOR}"
-
-	SetOutPath $0
-	File /oname=gvim.exe ${VIMSRC}\gvim_ole.exe
-	File /oname=install.exe ${VIMSRC}\installw32.exe
-	File /oname=uninstal.exe ${VIMSRC}\uninstalw32.exe
-	File ${VIMSRC}\vimrun.exe
-	File /oname=tee.exe ${VIMSRC}\teew32.exe
-	File /oname=xxd.exe ${VIMSRC}\xxdw32.exe
-	File ${VIMRT}\vimtutor.bat
-	File ${VIMRT}\README.txt
-	File ..\uninstal.txt
-	File ${VIMRT}\*.vim
-	File ${VIMRT}\rgb.txt
-
-	File ${VIMTOOLS}\diff.exe
-	File ${VIMTOOLS}\winpty32.dll
-	File ${VIMTOOLS}\winpty-agent.exe
-
-	SetOutPath $0\colors
-	File ${VIMRT}\colors\*.*
-
-	SetOutPath $0\compiler
-	File ${VIMRT}\compiler\*.*
-
-	SetOutPath $0\doc
-	File ${VIMRT}\doc\*.txt
-	File ${VIMRT}\doc\tags
-
-	SetOutPath $0\ftplugin
-	File ${VIMRT}\ftplugin\*.*
-
-	SetOutPath $0\indent
-	File ${VIMRT}\indent\*.*
-
-	SetOutPath $0\macros
-	File ${VIMRT}\macros\*.*
-	SetOutPath $0\macros\hanoi
-	File ${VIMRT}\macros\hanoi\*.*
-	SetOutPath $0\macros\life
-	File ${VIMRT}\macros\life\*.*
-	SetOutPath $0\macros\maze
-	File ${VIMRT}\macros\maze\*.*
-	SetOutPath $0\macros\urm
-	File ${VIMRT}\macros\urm\*.*
-
-	SetOutPath $0\pack\dist\opt\dvorak\dvorak
-	File ${VIMRT}\pack\dist\opt\dvorak\dvorak\*.*
-	SetOutPath $0\pack\dist\opt\dvorak\plugin
-	File ${VIMRT}\pack\dist\opt\dvorak\plugin\*.*
-
-	SetOutPath $0\pack\dist\opt\editexisting\plugin
-	File ${VIMRT}\pack\dist\opt\editexisting\plugin\*.*
-
-	SetOutPath $0\pack\dist\opt\justify\plugin
-	File ${VIMRT}\pack\dist\opt\justify\plugin\*.*
-
-	SetOutPath $0\pack\dist\opt\matchit\doc
-	File ${VIMRT}\pack\dist\opt\matchit\doc\*.*
-	SetOutPath $0\pack\dist\opt\matchit\plugin
-	File ${VIMRT}\pack\dist\opt\matchit\plugin\*.*
-
-	SetOutPath $0\pack\dist\opt\shellmenu\plugin
-	File ${VIMRT}\pack\dist\opt\shellmenu\plugin\*.*
-
-	SetOutPath $0\pack\dist\opt\swapmouse\plugin
-	File ${VIMRT}\pack\dist\opt\swapmouse\plugin\*.*
-
-	SetOutPath $0\pack\dist\opt\termdebug\plugin
-	File ${VIMRT}\pack\dist\opt\termdebug\plugin\*.*
-
-	SetOutPath $0\plugin
-	File ${VIMRT}\plugin\*.*
-
-	SetOutPath $0\autoload
-	File ${VIMRT}\autoload\*.*
-
-	SetOutPath $0\autoload\dist
-	File ${VIMRT}\autoload\dist\*.*
-
-	SetOutPath $0\autoload\xml
-	File ${VIMRT}\autoload\xml\*.*
-
-	SetOutPath $0\syntax
-	File ${VIMRT}\syntax\*.*
-
-	SetOutPath $0\spell
-	File ${VIMRT}\spell\*.txt
-	File ${VIMRT}\spell\*.vim
-	File ${VIMRT}\spell\*.spl
-	File ${VIMRT}\spell\*.sug
-
-	SetOutPath $0\tools
-	File ${VIMRT}\tools\*.*
-
-	SetOutPath $0\tutor
-	File ${VIMRT}\tutor\*.*
-SectionEnd
-
-##########################################################
-Section "Vim console program (vim.exe)"
-	SectionIn 1 3
-
-	SetOutPath $0
-	ReadRegStr $R0 HKLM \
-	   "SOFTWARE\Microsoft\Windows NT\CurrentVersion" CurrentVersion
-	IfErrors 0 lbl_winnt
-	    # Windows 95/98/ME: not supported
-	    Goto lbl_done
-	lbl_winnt:
-	    # Windows NT/2000/XP and later
-	    File /oname=vim.exe ${VIMSRC}\vimw32.exe
-	lbl_done:
-	StrCpy $2 "$2 vim view vimdiff"
-SectionEnd
-
-##########################################################
-Section "Create .bat files for command line use"
-	SectionIn 3
-
-	StrCpy $1 "$1 -create-batfiles $2"
-SectionEnd
-
-##########################################################
-Section "Create icons on the Desktop"
-	SectionIn 1 3
-
-	StrCpy $1 "$1 -install-icons"
-SectionEnd
-
-##########################################################
-Section "Add Vim to the Start Menu"
-	SectionIn 1 3
-
-	StrCpy $1 "$1 -add-start-menu"
-SectionEnd
-
-##########################################################
-Section "Add an Edit-with-Vim context menu entry"
-	SectionIn 1 3
-
-	# Be aware of this sequence of events:
-	# - user uninstalls Vim, gvimext.dll can't be removed (it's in use) and
-	#   is scheduled to be removed at next reboot.
-	# - user installs Vim in same directory, gvimext.dll still exists.
-	# If we now skip installing gvimext.dll, it will disappear at the next
-	# reboot.  Thus when copying gvimext.dll fails always schedule it to be
-	# installed at the next reboot.  Can't use UpgradeDLL!
-	# We don't ask the user to reboot, the old dll will keep on working.
-	SetOutPath $0
-	ClearErrors
-	SetOverwrite try
-
-	${If} ${RunningX64}
-	  # Install 64-bit gvimext.dll into the GvimExt64 directory.
-	  SetOutPath $0\GvimExt64
-	  ClearErrors
-	  File /oname=gvimext.dll ${VIMSRC}\GvimExt\gvimext64.dll
-!ifdef HAVE_NLS
-	  File ${GETTEXT}\gettext64\libintl-8.dll
-	  File ${GETTEXT}\gettext64\libiconv-2.dll
-!endif
-
-	  IfErrors 0 GvimExt64Done
-
-	  # Can't copy gvimext.dll, create it under another name and rename it
-	  # on next reboot.
-	  GetTempFileName $3 $0\GvimExt64
-	  File /oname=$3 ${VIMSRC}\GvimExt\gvimext64.dll
-	  Rename /REBOOTOK $3 $0\GvimExt64\gvimext.dll
-!ifdef HAVE_NLS
-	  GetTempFileName $3 $0\GvimExt64
-	  File /oname=$3 ${GETTEXT}\gettext64\libintl-8.dll
-	  Rename /REBOOTOK $3 $0\GvimExt64\libintl-8.dll
-	  GetTempFileName $3 $0\GvimExt64
-	  File /oname=$3 ${GETTEXT}\gettext64\libiconv-2.dll
-	  Rename /REBOOTOK $3 $0\GvimExt64\libiconv-2.dll
-!endif
-	${EndIf}
-
-	GvimExt64Done:
-
-	# Install 32-bit gvimext.dll into the GvimExt32 directory.
-	SetOutPath $0\GvimExt32
-	ClearErrors
-
-	File /oname=gvimext.dll ${VIMSRC}\GvimExt\gvimext.dll
-!ifdef HAVE_NLS
-	File ${GETTEXT}\gettext32\libintl-8.dll
-	File ${GETTEXT}\gettext32\libiconv-2.dll
-	File ${GETTEXT}\gettext32\libgcc_s_sjlj-1.dll
-!endif
-
-	IfErrors 0 GvimExt32Done
-
-	# Can't copy gvimext.dll, create it under another name and rename it on
-	# next reboot.
-	GetTempFileName $3 $0\GvimExt32
-	File /oname=$3 ${VIMSRC}\GvimExt\gvimext.dll
-	Rename /REBOOTOK $3 $0\GvimExt32\gvimext.dll
-!ifdef HAVE_NLS
-	GetTempFileName $3 $0\GvimExt32
-	File /oname=$3 ${GETTEXT}\gettext32\libintl-8.dll
-	Rename /REBOOTOK $3 $0\GvimExt32\libintl-8.dll
-	GetTempFileName $3 $0\GvimExt32
-	File /oname=$3 ${GETTEXT}\gettext32\libiconv-2.dll
-	Rename /REBOOTOK $3 $0\GvimExt32\libiconv-2.dll
-	GetTempFileName $3 $0\GvimExt32
-	File /oname=$3 ${GETTEXT}\gettext32\libgcc_s_sjlj-1.dll
-	Rename /REBOOTOK $3 $0\GvimExt32\libgcc_s_sjlj-1.dll
-!endif
-
-	GvimExt32Done:
-	SetOverwrite lastused
-
-	# We don't have a separate entry for the "Open With..." menu, assume
-	# the user wants either both or none.
-	StrCpy $1 "$1 -install-popup -install-openwith"
-SectionEnd
-
-##########################################################
-Section "Create a _vimrc if it doesn't exist" sec_vimrc_id
-	SectionIn 1 3
-
-	StrCpy $1 "$1 -create-vimrc"
-SectionEnd
-
-##########################################################
-Section "Create plugin directories in HOME or VIM"
-	SectionIn 1 3
-
-	StrCpy $1 "$1 -create-directories home"
-SectionEnd
-
-##########################################################
-Section "Create plugin directories in VIM"
-	SectionIn 3
-
-	StrCpy $1 "$1 -create-directories vim"
-SectionEnd
-
-##########################################################
-Section "VisVim Extension for MS Visual Studio"
-	SectionIn 3
-
-	SetOutPath $0
-	!insertmacro UpgradeDLL "${VIMSRC}\VisVim\VisVim.dll" "$0\VisVim.dll" "$0"
-	File ${VIMSRC}\VisVim\README_VisVim.txt
-SectionEnd
-
-##########################################################
-!ifdef HAVE_NLS
-	Section "Native Language Support"
-		SectionIn 1 3
-
-		SetOutPath $0\lang
-		File /r ${VIMRT}\lang\*.*
-		SetOutPath $0\keymap
-		File ${VIMRT}\keymap\README.txt
-		File ${VIMRT}\keymap\*.vim
-		SetOutPath $0
-		File ${GETTEXT}\gettext32\libintl-8.dll
-		File ${GETTEXT}\gettext32\libiconv-2.dll
-		#File /nonfatal ${VIMRT}\libwinpthread-1.dll
-		File /nonfatal ${GETTEXT}\gettext32\libgcc_s_sjlj-1.dll
-	SectionEnd
-!endif
-
-##########################################################
-Section -call_install_exe
-	SetOutPath $0
-	ExecWait "$0\install.exe $1"
-SectionEnd
-
-##########################################################
-Section -post
-	BringToFront
-SectionEnd
-
-##########################################################
-Function SetCustom
-	# Display the InstallOptions dialog
-
-	# Check if a _vimrc should be created
-	SectionGetFlags ${sec_vimrc_id} $3
-	IntOp $3 $3 & 1
-	StrCmp $3 "1" +2 0
-	  Abort
-
-	InstallOptions::dialog "$PLUGINSDIR\vimrc.ini"
-	Pop $3
-FunctionEnd
-
-Function ValidateCustom
-	ReadINIStr $3 "$PLUGINSDIR\vimrc.ini" "Field 2" "State"
-	StrCmp $3 "1" 0 +3
-	  StrCpy $1 "$1 -vimrc-remap no"
-	  Goto behave
-
-	  StrCpy $1 "$1 -vimrc-remap win"
-
-	behave:
-	ReadINIStr $3 "$PLUGINSDIR\vimrc.ini" "Field 5" "State"
-	StrCmp $3 "1" 0 +3
-	  StrCpy $1 "$1 -vimrc-behave unix"
-	  Goto done
-
-	ReadINIStr $3 "$PLUGINSDIR\vimrc.ini" "Field 6" "State"
-	StrCmp $3 "1" 0 +3
-	  StrCpy $1 "$1 -vimrc-behave mswin"
-	  Goto done
-
-	  StrCpy $1 "$1 -vimrc-behave default"
-	done:
-FunctionEnd
-
-##########################################################
-Section Uninstall
-	# Apparently $INSTDIR is set to the directory where the uninstaller is
-	# created.  Thus the "vim61" directory is included in it.
-	StrCpy $0 "$INSTDIR"
-
-	# If VisVim was installed, unregister the DLL.
-	IfFileExists "$0\VisVim.dll" Has_VisVim No_VisVim
-	Has_VisVim:
-	   ExecWait "regsvr32.exe /u /s $0\VisVim.dll"
-
-	No_VisVim:
-
-	# delete the context menu entry and batch files
-	ExecWait "$0\uninstal.exe -nsis"
-
-	# We may have been put to the background when uninstall did something.
-	BringToFront
-
-	# ask the user if the Vim version dir must be removed
-	MessageBox MB_YESNO|MB_ICONQUESTION \
-	  "Would you like to delete $0?$\n \
-	   $\nIt contains the Vim executables and runtime files." IDNO NoRemoveExes
-
-	Delete /REBOOTOK $0\*.dll
-	Delete /REBOOTOK $0\GvimExt32\*.dll
-	${If} ${RunningX64}
-	  Delete /REBOOTOK $0\GvimExt64\*.dll
-	${EndIf}
-
-	ClearErrors
-	# Remove everything but *.dll files.  Avoids that
-	# a lot remains when gvimext.dll cannot be deleted.
-	RMDir /r $0\autoload
-	RMDir /r $0\colors
-	RMDir /r $0\compiler
-	RMDir /r $0\doc
-	RMDir /r $0\ftplugin
-	RMDir /r $0\indent
-	RMDir /r $0\macros
-	RMDir /r $0\plugin
-	RMDir /r $0\spell
-	RMDir /r $0\syntax
-	RMDir /r $0\tools
-	RMDir /r $0\tutor
-	RMDir /r $0\VisVim
-	RMDir /r $0\lang
-	RMDir /r $0\keymap
-	Delete $0\*.exe
-	Delete $0\*.bat
-	Delete $0\*.vim
-	Delete $0\*.txt
-
-	IfErrors ErrorMess NoErrorMess
-	  ErrorMess:
-	    MessageBox MB_OK|MB_ICONEXCLAMATION \
-	      "Some files in $0 have not been deleted!$\nYou must do it manually."
-	  NoErrorMess:
-
-	# No error message if the "vim62" directory can't be removed, the
-	# gvimext.dll may still be there.
-	RMDir $0
-
-	NoRemoveExes:
-	# get the parent dir of the installation
-	Push $INSTDIR
-	Call un.GetParent
-	Pop $0
-	StrCpy $1 $0
-
-	# if a plugin dir was created at installation ask the user to remove it
-	# first look in the root of the installation then in HOME
-	IfFileExists $1\vimfiles AskRemove 0
-	    ReadEnvStr $1 "HOME"
-	    StrCmp $1 "" NoRemove 0
-
-	    IfFileExists $1\vimfiles 0 NoRemove
-
-	  AskRemove:
-	    MessageBox MB_YESNO|MB_ICONQUESTION \
-	      "Remove all files in your $1\vimfiles directory?$\n \
-	      $\nCAREFUL: If you have created something there that you want to keep, click No" IDNO Fin
-	    RMDir /r $1\vimfiles
-	  NoRemove:
-
-	# ask the user if the Vim root dir must be removed
-	MessageBox MB_YESNO|MB_ICONQUESTION \
-	  "Would you like to remove $0?$\n \
-	   $\nIt contains your Vim configuration files!" IDNO NoDelete
-	   RMDir /r $0 ; skipped if no
-	NoDelete:
-
-	Fin:
-	Call un.onUnInstSuccess
-
-SectionEnd
@@ -1,6 +0,0 @@
-# Generated from Makefile: define the version numbers
-!ifndef __GVIM_VER__NSH__
-!define __GVIM_VER__NSH__
-!define VER_MAJOR 8
-!define VER_MINOR 1
-!endif
@@ -1,68 +0,0 @@
-[Settings]
-NumFields=7
-
-[Field 1]
-Type=GroupBox
-Left=0
-Right=-1
-Top=0
-Bottom=53
-Text=" Key remapping "
-
-[Field 2]
-Type=radiobutton
-Text=Do not remap keys for Windows behavior (Default)
-Left=10
-Right=-10
-Top=17
-Bottom=25
-State=1
-Flags=GROUP
-
-[Field 3]
-Type=radiobutton
-Text=Remap a few keys for Windows behavior (<C-V>, <C-C>, <C-A>, <C-S>, <C-F>, etc)
-Left=10
-Right=-10
-Top=30
-Bottom=47
-State=0
-Flags=NOTABSTOP
-
-[Field 4]
-Type=GroupBox
-Left=0
-Right=-1
-Top=55
-Bottom=-5
-Text=" Mouse behavior "
-
-[Field 5]
-Type=radiobutton
-Text=Right button extends selection, left button starts visual mode (Unix)
-Left=10
-Right=-5
-Top=72
-Bottom=80
-State=0
-Flags=GROUP
-
-[Field 6]
-Type=radiobutton
-Text=Right button has a popup menu, left button starts select mode (Windows)
-Left=10
-Right=-5
-Top=85
-Bottom=93
-State=0
-Flags=NOTABSTOP
-
-[Field 7]
-Type=radiobutton
-Text=Right button has a popup menu, left button starts visual mode (Default)
-Left=10
-Right=-5
-Top=98
-Bottom=106
-State=1
-Flags=NOTABSTOP
@@ -1,44 +0,0 @@
-/* XPM */
-static char * alert_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"34 34 4 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s iconColor1	m black	c #000000",
-"X	s iconColor6	m white	c #FFFF00",
-"o	s bottomShadowColor	m black	c #5D6069",
-/* pixels */
-"                                  ",
-"              ...                 ",
-"             .XXX.                ",
-"            .XXXXX.o              ",
-"            .XXXXX.oo             ",
-"           .XXXXXXX.oo            ",
-"           .XXXXXXX.oo            ",
-"          .XXXXXXXXX.oo           ",
-"          .XXXXXXXXX.oo           ",
-"         .XXXXXXXXXXX.oo          ",
-"         .XXXX...XXXX.oo          ",
-"        .XXXX.....XXXX.oo         ",
-"        .XXXX.....XXXX.oo         ",
-"       .XXXXX.....XXXXX.oo        ",
-"       .XXXXX.....XXXXX.oo        ",
-"      .XXXXXX.....XXXXXX.oo       ",
-"      .XXXXXX.....XXXXXX.oo       ",
-"     .XXXXXXXX...XXXXXXXX.oo      ",
-"     .XXXXXXXX...XXXXXXXX.oo      ",
-"    .XXXXXXXXX...XXXXXXXXX.oo     ",
-"    .XXXXXXXXXX.XXXXXXXXXX.oo     ",
-"   .XXXXXXXXXXX.XXXXXXXXXXX.oo    ",
-"   .XXXXXXXXXXXXXXXXXXXXXXX.oo    ",
-"  .XXXXXXXXXXXX..XXXXXXXXXXX.oo   ",
-"  .XXXXXXXXXXX....XXXXXXXXXX.oo   ",
-" .XXXXXXXXXXXX....XXXXXXXXXXX.oo  ",
-" .XXXXXXXXXXXXX..XXXXXXXXXXXX.oo  ",
-" .XXXXXXXXXXXXXXXXXXXXXXXXXXX.ooo ",
-" .XXXXXXXXXXXXXXXXXXXXXXXXXXX.ooo ",
-"  .XXXXXXXXXXXXXXXXXXXXXXXXX.oooo ",
-"   .........................ooooo ",
-"     ooooooooooooooooooooooooooo  ",
-"      ooooooooooooooooooooooooo   ",
-"                                  "};
@@ -1,44 +0,0 @@
-/* XPM */
-static char * error_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"34 34 4 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s iconColor3	m black	c #FF0000",
-"X	s bottomShadowColor	m black	c #5D6069",
-"o	s iconColor2	m white	c #FFFFFF",
-/* pixels */
-"                                  ",
-"            ........              ",
-"          ............            ",
-"        ................          ",
-"       ..................         ",
-"      ....................X       ",
-"     ......................X      ",
-"    ........................X     ",
-"   .......o..........o.......X    ",
-"   ......ooo........ooo......X    ",
-"  ......ooooo......ooooo......X   ",
-"  .......ooooo....ooooo.......X   ",
-" .........ooooo..ooooo.........X  ",
-" ..........oooooooooo..........X  ",
-" ...........oooooooo...........XX ",
-" ............oooooo............XX ",
-" ............oooooo............XX ",
-" ...........oooooooo...........XX ",
-" ..........oooooooooo..........XX ",
-" .........ooooo..ooooo.........XX ",
-"  .......ooooo....ooooo.......XX  ",
-"  ......ooooo......ooooo......XX  ",
-"   ......ooo........ooo......XXX  ",
-"   .......o..........o.......XX   ",
-"    ........................XXX   ",
-"     ......................XXX    ",
-"     X....................XXX     ",
-"      X..................XXX      ",
-"       X................XXX       ",
-"        XX............XXXX        ",
-"          XX........XXXXX         ",
-"            XXXXXXXXXXX           ",
-"              XXXXXXX             ",
-"                                  "};
@@ -1,13 +0,0 @@
-#! /bin/sh
-
-prefix=stock_
-list=
-
-for file in "$@"
-do
-    name=`echo "$file" | sed 's|-|_|g; s|^.*/||; s|\..*$||'`
-    list="$list $prefix$name $file"
-done
-
-gdk-pixbuf-csource --raw --static --build-list $list
-
@@ -1,44 +0,0 @@
-/* XPM */
-static char * generic_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"34 34 4 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s bottomShadowColor	m black	c #5D6069",
-"X	s iconColor2	m white	c #FFFFFF",
-"o	s iconColor1	m black	c #000000",
-/* pixels */
-"                                  ",
-"            ........              ",
-"         ...XXXXXXXX...           ",
-"       ..XXXXXXXXXXXXXX..         ",
-"      .XXXXXXXXXXXXXXXXXX.        ",
-"     .XXXXXXXXXXXXXXXXXXXXo       ",
-"    .XXXXXXXXXXXXXXXXXXXXXXo      ",
-"   .XXXXXXXXXXXXXXXXXXXXXXXXo     ",
-"  .XXXXXXXXXXXXXXXXXXXXXXXXXXo    ",
-"  .XXXXXXXXXXXXXXXXXXXXXXXXXXo.   ",
-" .XXXXXXXXXXXXXXXXXXXXXXXXXXXXo.  ",
-" .XXXXXXXXXXXXXXXXXXXXXXXXXXXXo.  ",
-" .XXXXXXXXXXXXXXXXXXXXXXXXXXXXo.. ",
-" .XXXXXXXXXXXXXXXXXXXXXXXXXXXXo.. ",
-" .XXXXXXXXXXXXXXXXXXXXXXXXXXXXo.. ",
-" .XXXXXXXXXXXXXXXXXXXXXXXXXXXXo.. ",
-" .XXXXXXXXXXXXXXXXXXXXXXXXXXXXo.. ",
-"  .XXXXXXXXXXXXXXXXXXXXXXXXXXo... ",
-"  .XXXXXXXXXXXXXXXXXXXXXXXXXXo... ",
-"   .XXXXXXXXXXXXXXXXXXXXXXXXo...  ",
-"    oXXXXXXXXXXXXXXXXXXXXXXo....  ",
-"     oXXXXXXXXXXXXXXXXXXXXo....   ",
-"      oXXXXXXXXXXXXXXXXXXo....    ",
-"       ooXXXXXXXXXXXXXXoo....     ",
-"        .oooXXXXXXXXooo.....      ",
-"         ...oooXXXXo.......       ",
-"           ....oXXXo.....         ",
-"              .oXXXo..            ",
-"                oXXo..            ",
-"                 oXo..            ",
-"                  oo..            ",
-"                   ...            ",
-"                    ..            ",
-"                                  "};
@@ -1,44 +0,0 @@
-/* XPM */
-static char * info_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"34 34 4 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s bottomShadowColor	m black	c #5D6069",
-"X	s iconColor2	m white	c #FFFFFF",
-"o	s iconColor1	m black	c #000000",
-/* pixels */
-"                                  ",
-"            ........              ",
-"         ...XXXXXXXX...           ",
-"       ..XXXXXXXXXXXXXX..         ",
-"      .XXXXXXXXXXXXXXXXXX.        ",
-"     .XXXXXXXXooooXXXXXXXXo       ",
-"    .XXXXXXXXooooooXXXXXXXXo      ",
-"   .XXXXXXXXXooooooXXXXXXXXXo     ",
-"  .XXXXXXXXXXXooooXXXXXXXXXXXo    ",
-"  .XXXXXXXXXXXXXXXXXXXXXXXXXXo.   ",
-" .XXXXXXXXXXXXXXXXXXXXXXXXXXXXo.  ",
-" .XXXXXXXXXXoooooooXXXXXXXXXXXo.  ",
-" .XXXXXXXXXXXXoooooXXXXXXXXXXXo.. ",
-" .XXXXXXXXXXXXoooooXXXXXXXXXXXo.. ",
-" .XXXXXXXXXXXXoooooXXXXXXXXXXXo.. ",
-" .XXXXXXXXXXXXoooooXXXXXXXXXXXo.. ",
-" .XXXXXXXXXXXXoooooXXXXXXXXXXXo.. ",
-"  .XXXXXXXXXXXoooooXXXXXXXXXXo... ",
-"  .XXXXXXXXXXXoooooXXXXXXXXXXo... ",
-"   .XXXXXXXXXXoooooXXXXXXXXXo...  ",
-"    oXXXXXXXoooooooooXXXXXXo....  ",
-"     oXXXXXXXXXXXXXXXXXXXXo....   ",
-"      oXXXXXXXXXXXXXXXXXXo....    ",
-"       ooXXXXXXXXXXXXXXoo....     ",
-"        .oooXXXXXXXXooo.....      ",
-"         ...oooXXXXo.......       ",
-"           ....oXXXo.....         ",
-"              .oXXXo..            ",
-"                oXXo..            ",
-"                 oXo..            ",
-"                  oo..            ",
-"                   ...            ",
-"                    ..            ",
-"                                  "};
@@ -1,44 +0,0 @@
-/* XPM */
-static char * quest_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"34 34 4 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s bottomShadowColor	m black	c #5D6069",
-"X	s iconColor2	m white	c #FFFFFF",
-"o	s iconColor1	m black	c #000000",
-/* pixels */
-"                                  ",
-"            ........              ",
-"         ...XXXXXXXX...           ",
-"       ..XXXXXXXXXXXXXX..         ",
-"      .XXXXXXXXXXXXXXXXXX.        ",
-"     .XXXXXXXXoooooXXXXXXXo       ",
-"    .XXXXXXXXoXXXXooXXXXXXXo      ",
-"   .XXXXXXXXoooXXXXooXXXXXXXo     ",
-"  .XXXXXXXXXooooXXXooXXXXXXXXo    ",
-"  .XXXXXXXXXXooXXXoooXXXXXXXXo.   ",
-" .XXXXXXXXXXXXXXXooooXXXXXXXXXo.  ",
-" .XXXXXXXXXXXXXXooooXXXXXXXXXXo.  ",
-" .XXXXXXXXXXXXXoooooXXXXXXXXXXo.. ",
-" .XXXXXXXXXXXXoooooXXXXXXXXXXXo.. ",
-" .XXXXXXXXXXXXoooXXXXXXXXXXXXXo.. ",
-" .XXXXXXXXXXXXooXXXXXXXXXXXXXXo.. ",
-" .XXXXXXXXXXXXoXXXXXXXXXXXXXXXo.. ",
-"  .XXXXXXXXXXXoXXXXXXXXXXXXXXo... ",
-"  .XXXXXXXXXXXXXXXXXXXXXXXXXXo... ",
-"   .XXXXXXXXXXooXXXXXXXXXXXXo...  ",
-"    oXXXXXXXXooooXXXXXXXXXXo....  ",
-"     oXXXXXXXXooXXXXXXXXXXo....   ",
-"      oXXXXXXXXXXXXXXXXXXo....    ",
-"       ooXXXXXXXXXXXXXXoo....     ",
-"        .oooXXXXXXXXooo.....      ",
-"         ...oooXXXXo.......       ",
-"           ....oXXXo.....         ",
-"              .oXXXo..            ",
-"                oXXo..            ",
-"                 oXo..            ",
-"                  oo..            ",
-"                   ...            ",
-"                    ..            ",
-"                                  "};
@@ -1,28 +0,0 @@
-/* XPM */
-static char * tb_blank_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 4 1 0 0",
-/* colors */
-" 	s iconColor1	m black	c #000000",
-".	s none	m none	c none",
-"X	s topShadowColor	m none	c #DCDEE5",
-"o	s bottomShadowColor	m black	c #5D6069",
-/* pixels */
-"                 .",
-" XXXXXXXXXXXXXXX .",
-" X.............. o",
-" X.............. o",
-" X.............. o",
-" X.............. o",
-" X.............. o",
-" X.............. o",
-" X.............. o",
-" X.............. o",
-" X.............. o",
-" X.............. o",
-" X.............. o",
-" X.............. o",
-" X.............. o",
-" X.............. o",
-"                 o",
-"..oooooooooooooooo"};
@@ -1,31 +0,0 @@
-/* XPM */
-static char * tb_close_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 7 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	c #880000	m black",
-"X	s iconColor1	m black	c #000000",
-"o	s iconColor3	m black	c #FF0000",
-"O	s topShadowColor	m none	c #DCDEE5",
-"+	s iconColor2	m none	c #FFFFFF",
-"@	s bottomShadowColor	m black	c #5D6069",
-/* pixels */
-"                  ",
-"  ..XXXXXXXXX.    ",
-" .oo.OOOOOOO.o.   ",
-"  .oo.O+OOO.oo.   ",
-"   .oo.OOO.oo.@   ",
-"   X.oo.O.oo.X@   ",
-"   XO.oo.oo.+X@   ",
-"   XOO.ooo.O+X@   ",
-"   XOO.ooo.O+X@   ",
-"   XO.oo.oo.+X@   ",
-"   X.oo.O.oo.X@   ",
-"   .oo.OOO.oo.@   ",
-"  .oo.OOOOO.oo.   ",
-" .oo.OOOOOOO.oo.  ",
-"  ..+++++++++.o.  ",
-"   XXXXXXXXXXX.   ",
-"      @@@@@@@@@   ",
-"                  "};
@@ -1,28 +0,0 @@
-/* XPM */
-static char * tb_copy_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 4 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s iconColor1	m black	c #000000",
-"X	s iconColor2	m none	c #FFFFFF",
-"o	s bottomShadowColor	m black	c #5D6069",
-/* pixels */
-"                  ",
-"                  ",
-" ..........       ",
-" .XXXXXXXX.o      ",
-" .X.............  ",
-" .XXXX.XXXXXXXX.  ",
-" .X....X......X.o ",
-" .XXXX.XXXXXXXX.o ",
-" .X....X......X.o ",
-" .XXXX.XXXXXXXX.o ",
-" .X..X.X......X.o ",
-" .XXXX.XXXXXXXX.o ",
-" ......X..XXXXX.o ",
-"  oooo.XXXXXXXX.o ",
-"      ..........o ",
-"        ooooooooo ",
-"                  ",
-"                  "};
@@ -1,31 +0,0 @@
-/* XPM */
-static char * tb_ctags_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 7 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s iconColor1	m black	c #000000",
-"X	s iconColor2	m none	c #FFFFFF",
-"o	s bottomShadowColor	m black	c #5D6069",
-"O	m black	c #888800",
-"+	s topShadowColor	m none	c #DCDEE5",
-"@	s iconColor6	m none	c #FFFF00",
-/* pixels */
-"     .. .....     ",
-"    .XX.XXXXX.    ",
-"    .XXXXXXXXX.   ",
-"    .XX.XXXX..X.  ",
-"     .. ....o ..  ",
-"   OO++O+...+O+.+ ",
-"  Oo@@@@@...o@@@.o",
-" Oo@@@@@@...o@@@.o",
-"Oo@+o+@@@...o@@@.o",
-"O@@o.o@@@...o@@@.o",
-"o@@+o+@@@...o@@@.o",
-"o.@@@@@@@...o@@@.o",
-" o.@@@@@@...o@@@.o",
-"  o.........o....o",
-"   oooooo...oooooo",
-"         ...o     ",
-"         ...o     ",
-"          ooo     "};
@@ -1,27 +0,0 @@
-/* XPM */
-static char * tb_cut_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 3 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s iconColor1	m black	c #000000",
-"X	s bottomShadowColor	m black	c #5D6069",
-/* pixels */
-"                  ",
-"     .     .X     ",
-"     .X    .X     ",
-"      .   .X      ",
-"      .X  .X      ",
-"       . .X       ",
-"       .X.X       ",
-"        .X        ",
-"       ...X       ",
-"     X.X  .X      ",
-"    ...X  ...     ",
-"   .XX.X  .X .    ",
-"   .  .X  .X .X   ",
-"   .  .X  .X .X   ",
-"    ..XX   ..X    ",
-"    XX     XX     ",
-"                  ",
-"                  "};
@@ -1,33 +0,0 @@
-/* XPM */
-static char * tb_exit_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 9 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s iconColor1	m black	c #000000",
-"X	s iconColor2	m none	c #FFFFFF",
-"o	s bottomShadowColor	m black	c #5D6069",
-"O	s iconColor3	m black	c #FF0000",
-"+	s iconGray3	m none	c #adadad",
-"@	s iconGray4	m none	c #949494",
-"#	s iconGray5	m black	c #737373",
-"$	s iconGray6	m black	c #636363",
-/* pixels */
-"                  ",
-"                  ",
-"        ........  ",
-"        .XXXXXX.o ",
-"        .XXXXXX.o ",
-"      ...XXXXXX.o ",
-"      .O.XXXXXX.o ",
-" ......OO.XX..X.o ",
-" .OOOOOOOO.X..X.o ",
-" .OOOOOOOO.XXXX.o ",
-" ......OO.XXXXX.o ",
-"      .O.XXXXX+.o ",
-"      ...XXXX++.o ",
-"        .XX++@#.o ",
-"        .X+@##$.o ",
-"        ........o ",
-"          ooooooo ",
-"                  "};
@@ -1,29 +0,0 @@
-/* XPM */
-static char * tb_find_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 5 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s iconColor1	m black	c #000000",
-"X	s iconColor2	m none	c #FFFFFF",
-"O	s iconGray2	m none	c #bdbdbd",
-"+	s bottomShadowColor	m black	c #5D6069",
-/* pixels */
-"                  ",
-" .........        ",
-" .XXXXXXX..       ",
-" .XXXXXXX.O.      ",
-" .XXXXXXX....     ",
-" .XXXXXXXXXX.     ",
-" .XXXXXXX....     ",
-" .XXXXXX.OOOO.    ",
-" .XXXXX.OXXOOO.   ",
-" .XXXXX.OXOOOO.   ",
-" .XXXXX.OOOOOO.   ",
-" .XXXXX.OOOXOO.   ",
-" .XXXXXX.OOOO.+   ",
-" .XXXXXXX....+..  ",
-" .XXXXXXXXXX.+... ",
-" ............+ .. ",
-"    ++++++++++    ",
-"                  "};
@@ -1,29 +0,0 @@
-/* XPM */
-static char * tb_find_help_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 5 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s iconColor1	m black	c #000000",
-"X	s bottomShadowColor	m black	c #5D6069",
-"o	s iconGray2	m none	c #bdbdbd",
-"O	s iconColor2	m none	c #FFFFFF",
-/* pixels */
-"                  ",
-"                  ",
-"    .....X        ",
-"   ..  X..X       ",
-"  ..X   ...       ",
-"  ..X   ....      ",
-"  X..  .oOOo.     ",
-"      .oooOoo.    ",
-"      .OOOOoO.    ",
-"     ..oOOooo.    ",
-"     ...oOOo.X    ",
-"        ....X..   ",
-"     ..X     ...  ",
-"     ..X      ..  ",
-"     ..X          ",
-"      XX          ",
-"                  ",
-"                  "};
@@ -1,31 +0,0 @@
-/* XPM */
-static char * tb_find_next_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 7 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s iconColor1	m black	c #000000",
-"X	s iconColor2	m none	c #FFFFFF",
-"o	s iconGray2	m none	c #bdbdbd",
-"O	m black	c #880000",
-"+	s bottomShadowColor	m black	c #5D6069",
-"@	s iconColor3	m black	c #FF0000",
-/* pixels */
-"                  ",
-"  .........       ",
-"  .XXXXXXX..      ",
-"  .XXXXXXX.o.     ",
-"  .XOXXXXX....    ",
-"  +XOOXXXXXXX.    ",
-"OOOOO@OXXX....    ",
-"O@@@@@@OX.oooo.   ",
-"O@@@@@@@OoXXooo.  ",
-"O@@@@@@O.oXoooo.  ",
-"OOOOO@OX.oooooo.  ",
-"  +XOOXX.oooXoo.  ",
-"  .XOXXXX.oooo.+  ",
-"  .XXXXXXX....+.. ",
-"  .XXXXXXXXXX.+...",
-"  ............+ ..",
-"     ++++++++++   ",
-"                  "};
@@ -1,31 +0,0 @@
-/* XPM */
-static char * tb_find_prev_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 7 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s iconColor1	m black	c #000000",
-"X	s iconColor2	m none	c #FFFFFF",
-"o	s iconGray2	m none	c #bdbdbd",
-"O	s bottomShadowColor	m black	c #5D6069",
-"+	m black	c #880000",
-"@	s iconColor3	m black	c #FF0000",
-/* pixels */
-"                  ",
-"  .........       ",
-"  .XXXXXXX..      ",
-"  .XXXXXXX.o.     ",
-"  OX+XXXXX....    ",
-"  o++XXXXXXXX.    ",
-"  +@+++++X....    ",
-" +@@@@@@+.oooo.   ",
-"+@@@@@@@.oXXooo.  ",
-" +@@@@@@.oXoooo.  ",
-"  +@++++.oooooo.  ",
-"  o++XXX.oooXoo.  ",
-"  OX+XXXX.oooo.O  ",
-"  .XXXXXXX....O.. ",
-"  .XXXXXXXXXX.O...",
-"  ............O ..",
-"     OOOOOOOOOO   ",
-"                  "};
@@ -1,27 +0,0 @@
-/* XPM */
-static char * tb_help_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 3 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s iconColor1	m black	c #000000",
-"X	s bottomShadowColor	m black	c #5D6069",
-/* pixels */
-"                  ",
-"                  ",
-"      .....X      ",
-"     ..  X..X     ",
-"    ..X   ...     ",
-"    ..X   ...     ",
-"    X..  X..X     ",
-"         ..X      ",
-"        ..        ",
-"       ..X        ",
-"       ..X        ",
-"                  ",
-"       ..X        ",
-"       ..X        ",
-"       ..X        ",
-"        XX        ",
-"                  ",
-"                  "};
@@ -1,30 +0,0 @@
-/* XPM */
-static char * tb_jump_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 6 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	m black	c #888800",
-"X	s bottomShadowColor	m black	c #5D6069",
-"o	s iconColor6	m none	c #FFFF00",
-"O	s iconColor1	m black	c #000000",
-"+	s topShadowColor	m none	c #DCDEE5",
-/* pixels */
-"                  ",
-"                  ",
-"                  ",
-"                  ",
-"   .............. ",
-"  .XooooooooooooOX",
-" .XoooooooooooooOX",
-".Xo+X+ooooooooooOX",
-".ooXOXooooooooooOX",
-"Xoo+X+ooooooooooOX",
-"XOooooooooooooooOX",
-" XOoooooooooooooOX",
-"  XOOOOOOOOOOOOOOX",
-"   XXXXXXXXXXXXXXX",
-"                  ",
-"                  ",
-"                  ",
-"                  "};
@@ -1,33 +0,0 @@
-/* XPM */
-static char * tb_load_session_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 9 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	m black	c #880000",
-"X	s iconColor3	m black	c #FF0000",
-"o	s iconColor1	m black	c #000000",
-"O	s iconColor2	m none	c #FFFFFF",
-"+	s iconGray2	m none	c #bdbdbd",
-"@	s iconGray5	m black	c #737373",
-"#	s iconGray4	m none	c #949494",
-"$	s bottomShadowColor	m black	c #5D6069",
-/* pixels */
-"        ..        ",
-"       .XX.       ",
-"      .XXXX.      ",
-"     ...XX...     ",
-"       .XX.       ",
-"       .XX.       ",
-"       .XX.       ",
-"       ....       ",
-"   ooooooooooooo  ",
-"  oOOOOOOOOOO++@o ",
-" oOOOOOOOOOOOO#@o ",
-" oO+++++++++XX#@o ",
-" oO+++++++++++#@o ",
-" oOoooooooooo+#@o$",
-" oOOOOOOOOOOO+#@o$",
-" o+###########@o$ ",
-"  ooooooooooooo$  ",
-"    $$$$$$$$$$$   "};
@@ -1,28 +0,0 @@
-/* XPM */
-static char * tb_macro_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 4 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s iconColor1	m black	c #000000",
-"X	s bottomShadowColor	m black	c #5D6069",
-"o	s iconColor2	m none	c #FFFFFF",
-/* pixels */
-"       ..X        ",
-"      .oo.X       ",
-"     .oooo.X      ",
-"     .oooo.X      ",
-"      .oo.XX      ",
-"       ..XX       ",
-"   .....o.X       ",
-"  .ooooooo.X      ",
-"  .oooooooo.X     ",
-"   .....ooo.X     ",
-"      ..ooo.X     ",
-"     .ooooo.X     ",
-"    .ooooooo.X    ",
-"   .ooo...ooo.X   ",
-"  .ooo.XX..ooo.X  ",
-"  .oo.XX  X.oo.X  ",
-"   ...X    X...X  ",
-"    XX       XXX  "};
@@ -1,28 +0,0 @@
-/* XPM */
-static char * tb_make_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 4 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s iconColor1	m black	c #000000",
-"X	s iconColor2	m none	c #FFFFFF",
-"o	s bottomShadowColor	m black	c #5D6069",
-/* pixels */
-"                  ",
-"    .. .....      ",
-"   .XX.XXXXX.     ",
-"   .XXXXXXXXX.    ",
-"   .Xo.XXXX..X.   ",
-"    .. ....o ..   ",
-"        ...   .   ",
-"        ...o      ",
-"        ...o      ",
-"        ...o      ",
-"        ...o      ",
-"        ...o      ",
-"        ...o      ",
-"        ...o      ",
-"        ...o      ",
-"        ...o      ",
-"         ooo      ",
-"                  "};
@@ -1,29 +0,0 @@
-/* XPM */
-static char * tb_maximize_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 5 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s topShadowColor	m none	c #DCDEE5",
-"X	s iconColor1	m black	c #000000",
-"o	s iconColor2	m none	c #FFFFFF",
-"O	s bottomShadowColor	m black	c #5D6069",
-/* pixels */
-"                  ",
-"  .XXXXXXXXXXX    ",
-"  .X....X...oX    ",
-"  .X..oXXX..oXO   ",
-"  .X.oXXXXX.oXO   ",
-"  .X........oXO   ",
-"  .X........oXO   ",
-"  .X........oXO   ",
-"  .X........oXO   ",
-"  .X........oXO   ",
-"  .X........oXO   ",
-"  .X........oXO   ",
-"  .X..XXXXX.oXO   ",
-"  .X...XXX..oXO   ",
-"  .XooooXooooXO   ",
-"  .XXXXXXXXXXXO   ",
-"     OOOOOOOOOO   ",
-"                  "};
@@ -1,29 +0,0 @@
-/* XPM */
-static char * tb_maxwidth_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 5 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s topShadowColor	m none	c #DCDEE5",
-"X	s iconColor1	m black	c #000000",
-"o	s iconColor2	m none	c #FFFFFF",
-"O	s bottomShadowColor	m black	c #5D6069",
-/* pixels */
-"                  ",
-"                  ",
-"                  ",
-"                  ",
-".XXXXXXXXXXXXXXXX ",
-".X.............oX ",
-".X..X........X.oXO",
-".X.XX........XXoXO",
-".XXXX........XXXXO",
-".X.XX........XXoXO",
-".X..X........X.oXO",
-".XooooooooooooooXO",
-".XXXXXXXXXXXXXXXXO",
-"   OOOOOOOOOOOOOOO",
-"                  ",
-"                  ",
-"                  ",
-"                  "};
@@ -1,29 +0,0 @@
-/* XPM */
-static char * tb_minimize_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 5 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s iconColor1	m black	c #000000",
-"X	s topShadowColor	m none	c #DCDEE5",
-"o	s iconColor2	m none	c #FFFFFF",
-"O	s bottomShadowColor	m black	c #5D6069",
-/* pixels */
-"                  ",
-"      .....       ",
-"       ...        ",
-"        .         ",
-"                  ",
-" X.............   ",
-" X.XXXXXXXXXXo.   ",
-" X.XXoXXXXXXXo.O  ",
-" X.XXXXXXXXXXo.O  ",
-" X.XXXXXXXXXoo.O  ",
-" X.ooooooooooo.O  ",
-" X.............O  ",
-"    OOOOOOOOOOOO  ",
-"                  ",
-"        .         ",
-"       ...        ",
-"      .....       ",
-"                  "};
@@ -1,29 +0,0 @@
-/* XPM */
-static char * tb_minwidth_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 5 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s topShadowColor	m none	c #DCDEE5",
-"X	s iconColor1	m black	c #000000",
-"o	s iconColor2	m none	c #FFFFFF",
-"O	s bottomShadowColor	m black	c #5D6069",
-/* pixels */
-"                  ",
-"                  ",
-"     .XXXXXX      ",
-"     .X...oX      ",
-"     .X...oX      ",
-"     .X...oX      ",
-" X   .X.o.oXO   X ",
-" XX  .X...oXO  XX ",
-" XXX .X...oXO XXX ",
-" XX  .X...oXO  XX ",
-" X   .X...oXO   X ",
-"     .X...oXO     ",
-"     .X..ooXO     ",
-"     .XooooXO     ",
-"     .XXXXXXO     ",
-"        OOOOO     ",
-"                  ",
-"                  "};
@@ -1,29 +0,0 @@
-/* XPM */
-static char * tb_new_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 5 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s bottomShadowColor	m black	c #5D6069",
-"X	s iconColor2	m none	c #FFFFFF",
-"o	s iconColor1	m black	c #000000",
-"O	s topShadowColor	m none	c #DCDEE5",
-/* pixels */
-"         .  .X.   ",
-"         X. .X. X.",
-"  ooooooo.X.oXoX.X",
-"  oOOOOOOOoXXXXo..",
-"  oOOOOOOOXXXXXXXX",
-"  oOOXOOOOoXoXXo..",
-"  oOXXOOO.OXoXoX  ",
-"  oOOOOO.OOXoX..X ",
-"  oOOOOOOOOXoX. .X",
-"  oOOOOOOOOXo.   .",
-"  oOOOOOOOOXo.    ",
-"  oOOOOOOOOXo.    ",
-"  oOOOOOOOOXo.    ",
-"  oOOOOOOOOXo.    ",
-"  oOOOOOOOOXo.    ",
-"  oXXXXXXXXXo.    ",
-"  ooooooooooo.    ",
-"    ..........    "};
@@ -1,32 +0,0 @@
-/* XPM */
-static char * tb_new_session_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 8 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s bottomShadowColor	m black	c #5D6069",
-"X	s iconColor2	m none	c #FFFFFF",
-"o	s iconColor1	m black	c #000000",
-"O	s iconGray2	m none	c #bdbdbd",
-"+	s iconGray5	m black	c #737373",
-"@	s iconGray4	m none	c #949494",
-"#	s iconColor3	m black	c #FF0000",
-/* pixels */
-"    .  .X.  .     ",
-"     . oXo .      ",
-"    ..oXXXo..     ",
-"    XXXXXXXXX     ",
-"    ..oXXXo..     ",
-"     . oXo .      ",
-"    .  .X.  .     ",
-"        .         ",
-"   ooooooooooooo  ",
-"  oXXXXXXXXXXOO+o ",
-" oXXXXXXXXXXXX@+o ",
-" oXOOOOOOOOO##@+o ",
-" oXOOOOOOOOOOO@+o ",
-" oXooooooooooO@+o.",
-" oXXXXXXXXXXXO@+o.",
-" oO@@@@@@@@@@@+o. ",
-"  ooooooooooooo.  ",
-"    ...........   "};
@@ -1,31 +0,0 @@
-/* XPM */
-static char * tb_open_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 7 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s iconColor1	m black	c #000000",
-"X	s bottomShadowColor	m black	c #5D6069",
-"o	s iconColor2	m none	c #FFFFFF",
-"O	s iconGray1	m none	c #dedede",
-"+	s iconGray5	m black	c #737373",
-"@	s iconGray3	m none	c #adadad",
-/* pixels */
-"                  ",
-"    .........X    ",
-"    .oooooo.o.X   ",
-"    .oooooo.oo.X  ",
-"    .oooooo....X  ",
-"  ...ooooooooo... ",
-"  .O.OOOOOOOOo.+. ",
-".............O.+.X",
-".oooooooooooo..+.X",
-" .o@@@@@@@@@@+.+.X",
-" .o@@@@@@@@@@@.+.X",
-"  .o@@@@@@@@@@+..X",
-"  .o@@@@@@@@@@@..X",
-"   .o+++++++++++.X",
-"   ..............X",
-"     XXXXXXXXXXXXX",
-"                  ",
-"                  "};
@@ -1,31 +0,0 @@
-/* XPM */
-static char * tb_paste_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 7 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s iconColor1	m black	c #000000",
-"X	s iconGray5	m black	c #737373",
-"o	s iconGray2	m none	c #bdbdbd",
-"O	s bottomShadowColor	m black	c #5D6069",
-"+	s iconGray4	m none	c #949494",
-"@	s iconColor2	m none	c #FFFFFF",
-/* pixels */
-"                  ",
-"     ....         ",
-"     XXXX         ",
-"  ...oooo...O     ",
-" .o+......++.O    ",
-" .o+++++++++.O    ",
-" .o+++..........  ",
-" .o+++.@@@@@@@@.  ",
-" .o+++.@......@.O ",
-" .o+++.@@@@@@@@.O ",
-" .o+++.@@@@@@@@.O ",
-" .o+++.@......@.O ",
-" .o+++.@@@@@@@@.O ",
-"  .....@..@@@@@.O ",
-"   OOO.@@@@@@@@.O ",
-"      ..........O ",
-"        OOOOOOOOO ",
-"                  "};
@@ -1,31 +0,0 @@
-/* XPM */
-static char * tb_print_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 7 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s iconColor1	m black	c #000000",
-"X	s iconColor2	m none	c #FFFFFF",
-"o	s iconGray2	m none	c #bdbdbd",
-"O	s iconGray5	m black	c #737373",
-"+	s bottomShadowColor	m black	c #5D6069",
-"@	c #FF1144",
-/* pixels */
-"   .......        ",
-"   .XXXXX..       ",
-"   .XXXXX.X.      ",
-"   .XXXXX....     ",
-"   .XXXXXXXX.     ",
-"   .XXXXXXXX.     ",
-"  ..XXXXXXXX..    ",
-"   .XXXXXXXX.O    ",
-"................  ",
-".XXXXXXXXXXXXXO.  ",
-".X@@ooooooooooO.O ",
-".XooooooooooooO.O ",
-".XooooooooooooO.O ",
-"................O ",
-" .OOOOOOOOOOOO.OO ",
-" ..............O  ",
-"   OOOOOOOOOOOOO  ",
-"                  "};
@@ -1,28 +0,0 @@
-/* XPM */
-static char * tb_redo_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 4 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s iconColor1	m black	c #000000",
-"X	s iconColor2	m none	c #FFFFFF",
-"o	s bottomShadowColor	m black	c #5D6069",
-/* pixels */
-"                  ",
-"                  ",
-"      .....  ..   ",
-"    ..XXXXX..X.o  ",
-"   .XXXXXXXXXX.o  ",
-"   .XX....XXXX.o  ",
-"  .XX.ooo.XXXX.o  ",
-"  .XX.o .XXXXX.o  ",
-"  .XX.o .......o  ",
-"  .XX.o  ooo.ooo  ",
-"  .XX.o    .X.    ",
-"   .XX.....XX.o   ",
-"   .XXXXXXXX.oo   ",
-"    ..XXXXX.oo    ",
-"      .....oo     ",
-"       ooooo      ",
-"                  ",
-"                  "};
@@ -1,33 +0,0 @@
-/* XPM */
-static char * tb_replace_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 9 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s iconColor1	m black	c #000000",
-"X	s iconColor2	m none	c #FFFFFF",
-"o	s bottomShadowColor	m black	c #5D6069",
-"+	s iconGray4	m none	c #949494",
-"@	s iconColor3	m black	c #FF0000",
-"#	s iconGray3	m none	c #adadad",
-"$	s iconGray1	m none	c #dedede",
-"%	s iconGray7	m black	c #424242",
-/* pixels */
-"                  ",
-"  .........       ",
-"  .XXXXXXX..      ",
-"  .X..XXXX.X.     ",
-"  oX..oXXX....    ",
-"  o.X..XXXXXX.    ",
-"  +....oXXXXX.o   ",
-"  .XXX..XXXXX.o   ",
-" ..oXo...XXXX.o   ",
-"  +XXXXXXXXXX+o   ",
-"  .X@@XX@XXX....  ",
-"  .Xo@XX@@XX.#$.. ",
-"  .XXo@@@@@X....  ",
-"  .XXXXX@@XX.#$.. ",
-"  .XXXXX@XXX.#$.. ",
-"  ......o..%....  ",
-"     ooooooooo    ",
-"                  "};
@@ -1,29 +0,0 @@
-/* XPM */
-static char * tb_save_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 5 1 0 0",
-/* colors */
-" 	s none	m none	c none",
-".	s iconColor1	m black	c #000000",
-"X	s iconGray2	m none	c #bdbdbd",
-"o	s iconColor2	m none	c #FFFFFF",
-"O	s bottomShadowColor	m black	c #5D6069",
-/* pixels */
-"                  ",
-" ..............   ",
-" .X.oooooooo.o.   ",
-" .X.oooooooo...O  ",
-" .X.oooooooo.X.O  ",
-" .X.oooooooo.X.O  ",
-" .X.oooooooo.X.O  ",
-" .X.oooooooo.X.O  ",
-" .XX........XX.O  ",
-" .XXXXXXXXXXXX.O  ",
-" .XX.........X.O  ",
-" .XX......oo.X.O  ",
-" .XX......oo.X.O  ",
-" .XX......oo.X.O  ",
-"  .............O  ",
-"   OOOOOOOOOOOOO  ",
-"                  ",
-"                  "};
@@ -1,29 +0,0 @@
-/* XPM */
-static char * tb_save_all_xpm[] = {
-/* width height ncolors cpp [x_hot y_hot] */
-"18 18 5 1 0 0",
-/* colors */
-" 	s iconColor1	m black	c #000000",
-".	s none	m none	c none",
-"X	s iconGray2	m none	c #bdbdbd",
-"o	s iconColor2	m none	c #FFFFFF",
-"O	s bottomShadowColor	m black	c #5D6069",
-/* pixels */
-"              ....",
-" X oooooooo o ....",
-" X oooooooo   O...",
-" X               .",
-" X  X oooooooo o .",
-" X  X oooooooo   O",
-" X  X oooooooo X O",
-" XX X oooooooo X O",
-" XX X oooooooo X O",
-" XX X oooooooo X O",
-" XX XX        XX O",
-" XX XXXXXXXXXXXX O",
-" XX XX         X O",
-".   XX      oo X O",
-"..O XX      oo X O",
-"... XX      oo X O",
-"....             O",
-".....OOOOOOOOOOOO."};
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
vimboss	2eaa14412a	This is the experimental Vim 7 code. Much work to be done...	2004-06-13 12:29:53 +00:00
vimboss	dd01c0757f	Initial revision	2004-06-13 12:29:53 +00:00