Previously, bridging conversions were handled as a form of "explicit
conversion" that was treated along the same path as normal
conversions in matchTypes(). Historically, this made some
sense---bridging was just another form of conversion---however, Swift
now separates out bridging into a different kind of conversion that is
available only via an explicit "as". This change accomplishes a few
things:
* Improves type inference around "as" coercions. We were incorrectly
inferring type variables of the "x" in "x as T" in cases where a
bridging conversion was expected, which cause some type inference
failures (e.g., the SR-3319 regression).
* Detangles checking for bridging conversions from other conversions,
so it's easier to isolate when we're applying a bridging
conversion.
* Explicitly handle optionals when dealing with bridging conversions,
addressing a number of problems with incorrect diagnostics, e.g.,
complains about "unrelated type" cast failures that would succeed at
runtime.
Addresses rdar://problem/29496775 / SR-3319 / SR-2365.
- The DeclContext versions of these methods have equivalents
on the DeclContext class; use them instead.
- The GenericEnvironment versions of these methods are now
static methods on the GenericEnvironment class. Note that
these are not made redundant by the instance methods on
GenericEnvironment, since the static methods can also be
called with a null GenericEnvironment, in which case they
just assert that the type is fully concrete.
- Remove some unnecessary #includes of ArchetypeBuilder.h
and GenericEnvironment.h. Now changes to these files
result in a lot less recompilation.
Rename the old getMemberSubstitutions() to getContextSubstitutions()
and add a new getMemberSubstitutions() that takes a ValueDecl, rather
than the member's DeclContext.
This new method forwards generic parameters if the member is a generic
function.
- TypeAliasDecl::getAliasType() is gone. Now, getDeclaredInterfaceType()
always returns the NameAliasType.
- NameAliasTypes now always desugar to the underlying type as an
interface type.
- The NameAliasType of a generic type alias no longer desugars to an
UnboundGenericType; call TypeAliasDecl::getUnboundGenericType() if you
want that.
- The "lazy mapTypeOutOfContext()" hack for deserialized TypeAliasDecls
is gone.
- The process of constructing a synthesized TypeAliasDecl is much simpler
now; instead of calling computeType(), setInterfaceType() and then
setting the recursive properties in the right order, just call
setUnderlyingType(), passing it either an interface type or a
contextual type.
In particular, many places weren't setting the recursive properties,
such as the ClangImporter and deserialization. This meant that queries
such as hasArchetype() or hasTypeParameter() would return incorrect
results on NameAliasTypes, which caused various subtle problems.
- Finally, add some more tests for generic typealiases, most of which
fail because they're still pretty broken.
Use a syntax that declares the layout's generic parameters and fields,
followed by the generic arguments to apply to the layout:
{ var Int, let String } // A concrete box layout with a mutable Int
// and immutable String field
<T, U> { var T, let U } <Int, String> // A generic box layout,
// applied to Int and String
// arguments
After recent changes, this asserts on all decls that are not VarDecls,
so we can just enforce that statically now. Interestingly, this turns
up some dead code which would have asserted immediately if called.
Also, replace AnyFunctionRef::getType() with
AnyFunctionRef::getInterfaceType(), since the old
AnyFunctionRef::getType() would just assert when called on
a Decl.
This fixes a regression from the previous patch which got
rid of PrintOptions::StripDynamicSelf.
When printing protocol declarations with a BaseType set in
PrintOptions, we can end up with a DynamicSelfType wrapping
a non-class type, if the protocol requirement returned
Self.
Note that this changes the diagnostic for missing protocol
requirements slightly; we used to sometimes refer to 'Self'
even if the conforming type is not a class, which is not
accepted by the type checker anyway. I believe the new
diagnostics are more correct.
Store leading a trailing "trivia" around a token, such as whitespace,
comments, doc comments, and escaping backticks. These are syntactically
important for preserving formatting when printing ASTs but don't
semantically affect the program.
Tokens take all trailing trivia up to, but not including, the next
newline. This is important to maintain checks that statements without
semicolon separators start on a new line, among other things.
Trivia are now data attached to the ends of tokens, not tokens
themselves.
Create a new Syntax sublibrary for upcoming immutable, persistent,
thread-safe ASTs, which will contain only the syntactic information
about source structure, as well as for generating new source code, and
structural editing. Proactively move swift::Token into there.
Since this patch is getting a bit large, a token fuzzer which checks
for round-trip equivlence with the workflow:
fuzzer => token stream => file1
=> Lexer => token stream => file 2 => diff(file1, file2)
Will arrive in a subsequent commit.
This patch does not change the grammar.
TypeBase::getMemberSubstitutions(const DeclContext *dc) collects type
substitution information when a decl context can be treated as part of the
type definition. However, we call it without checking whether the
part-of-whole relationship really holds. This patch checks the
pre-condition before calling it to fix a crash.
We don't want the machine calling conventions for closure invocation functions to necessarily be tied to the convention for normal thin functions or methods. NFC yet; for now, 'closure' follows the same behavior as the 'method' convention, but as part of partial_apply simplification it will be a requirement that partial_apply takes a @convention(closure) function and a box and produces a @convention(thick) function from them.
Sugared GenericTypeParamTypes point to GenericTypeParamDecls,
allowing the name of the parameter as written by the user to be
recovered. Canonical GenericTypeParamTypes on the other hand
only store a depth and index, without referencing the original
declaration.
When printing SIL, we wish to output the original generic parameter
names, even though SIL only uses canonical types. Previously,
we used to accomplish this by mapping the generic parameter to an
archetype and printing the name of the archetype. This was not
adequate if multiple generic parameters mapped to the same
archetype, or if a generic parameter was mapped to a concrete type.
The new approach preserves the original sugared types in the
GenericEnvironment, adding a new GenericEnvironment::getSugaredType()
method.
There are also some other assorted simplifications made possible
by this.
Unfortunately this makes GenericEnvironments use a bit more memory,
however I have more improvements coming that will offset the gains,
in addition to making substitution lists smaller also.
UnconditionalAvailabilityKind => PlatformAgnosticAvailabilityKind
::UnavailableInCurrentSwift => ::SwiftVersionSpecific
Plus a couple related method renamings. Prep work for SR-2709.
Type::subst()'s "IgnoreMissing" option was fairly unprincipled, dropping
unsubstituted types into the resulting AST without any indication
whatsoever that anything went wrong. Replace this notion with a new
form of ErrorType that explicitly tracks which substituted type caused
the problem. It's still an ErrorType, but it prints like the
substituted type (which is important for code completion) and allows
us to step back to the substituted type if needed (which is used by
associated type inference). Then, allow Type::subst(), when the new
UseErrorTypes flag is passed, to form partially-substituted types that
contain errors, which both code completion and associated type
inference relied on.
Over time, I hope we can use error-types-with-original-types more
often to eliminate "<<error type>>" from diagnostics and teach
Type::subst() never to return a "null" type. Clients can check
"hasError()" to deal with failure cases rather than checking null.
This particular flag should only be used in rare cases where we don't
want to know about failures, but instead want to get some
partially-formed type. Only very specific parts of the type checker
need this (associated type inference), and code completion relies on
it for slightly-better results.
There was a ton of complicated logic here to work around
two problems:
- Same-type constraints were not represented properly in
RequirementReprs, requiring us to store them in strong form
and parse them out when printing type interfaces.
- The TypeBase::getAllGenericArgs() method did not do the
right thing for members of protocols and protocol extensions,
and so instead of simple calls to Type::subst(), we had
an elaborate 'ArchetypeTransformer' abstraction repeated
in two places.
Rewrite this code to use GenericSignatures and
GenericFunctionType instead of old-school GenericParamLists
and PolymorphicFunctionType.
This changes the code completion and AST printer output
slightly. A few of the changes are actually fixes for cases
where the old code didn't handle substitutions properly.
A few others are subjective, for example a generic parameter
list of the form <T : Proto> now prints as <T where T : Proto>.
We can add heuristics to make the output whatever we want
here; the important thing is that now we're using modern
abstractions.
There's a bit of a hack to deal with generic typealiases, but
overall this makes things more logical.
This is the last big refactoring before we can allow constrained
extensions to make generic parameters concrete. All that remains
is a small set of changes to SIL type lowering, and retooling
some diagnostics in Sema.
Switch printing off of using Function's ExtInfo for autoclosure and
escaping, and onto the ParameterTypeFlags, which let us do precise and
accurate context-sensitive printing of these parameter type
attributes. This fixes a huge list of issues where we were printing
@escaping for things like optional ObjC completion handlers, among
many others. We now correctly print @escaping in more places, and
don't print it when it's not correct.
Also updates the dumper to be consistent and give a good view of the
AST as represented in memory. Tests updated, more involved testing
coming soon.
Now that TupleTypeElts are simpler in Swift 3 (though they're about to
become more complicated for other reasons), most of the cases where we
are explicitly constructing ones are really just plain copies or can
otherwise use existing helper functions.
NFC
