It is possible for a module interface (e.g., ModuleA) to be generated
with C++ interop disabled, and then rebuilt with C++ interop enabled
(e.g., because ModuleB, which imports ModuleA, has C++ interop enabled).
This circumstance can lead to various issues when name lookup behaves
differently depending on whether C++ interop is enabled, e.g., when
a module name is shadowed by a namespace of the same name---this only
happens in C++ because namespaces do not exist in C. Unfortunately,
naming namespaces the same as a module is a common C++ convention,
leading to many textual interfaces whose fully-qualified identifiers
(e.g., c_module.c_member) cannot be correctly resolved when C++ interop
is enabled (because c_module is shadowed by a namespace of the same
name).
This patch does two things. First, it introduces a new frontend flag,
-formal-cxx-interoperability-mode, which records the C++ interop mode
a module interface was originally compiled with. Doing so allows
subsequent consumers of that interface to interpret it according to the
formal C++ interop mode. Note that the actual "versioning" used by this
flag is very crude: "off" means disabled, and "swift-6" means enabled.
This is done to be compatible with C++ interop compat versioning scheme,
which seems to produce some invalid (but unused) version numbers. The
versioning scheme for both the formal and actual C++ interop modes
should be clarified and fixed in a subsequent patch.
The second thing this patch does is fix the module/namespace collision
issue in module interface files. It uses the formal C++ interop mode to
determine whether it should resolve C++-only decls during name lookup.
For now, the fix is very minimal and conservative: it only filters out
C++ namespaces during unqualified name lookup in an interface that was
originally generated without C++ interop. Doing so should fix the issue
while minimizing the chance for collateral breakge. More cases other
than C++ namespaces should be added in subsequent patches, with
sufficient testing and careful consideration.
rdar://144566922
Sema now type-checks the alternate ABI-providing decls inside of @abi attributes.
Making this work—particularly, making redeclaration checking work—required making name lookup aware of ABI decls. Name lookup now evaluates both API-providing and ABI-providing declarations. In most cases, it will filter ABI-only decls out unless a specific flag is passed, in which case it will filter API-only decls out instead. Calls that simply retrieve a list of declarations, like `IterableDeclContext::getMembers()` and friends, typically only return API-providing decls; you have to access the ABI-providing ones through those.
As part of that work, I have also added some basic compiler interfaces for working with the API-providing and ABI-providing variants. `ABIRole` encodes whether a declaration provides only API, only ABI, or both, and `ABIRoleInfo` combines that with a pointer to the counterpart providing the other role (for a declaration that provides both, that’ll just be a pointer to `this`).
Decl checking of behavior specific to @abi will come in a future commit.
Note that this probably doesn’t properly exercise some of the new code (ASTScope::lookupEnclosingABIAttributeScope(), for instance); I expect that to happen only once we can rename types using an @abi attribute, since that will create distinguishable behavior differences when resolving TypeReprs in other @abi attributes.
Introduce a number of fixes to allow us to fully use declarations that
are produced by applying a peer macro to an imported declarations.
These changes include:
* Ensuring that we have the right set of imports in the source file
containing the macro expansion, because it depends only on the module
it comes from
* Ensuring that name lookup looks in that file even when the
DeclContext hierarchy doesn't contain the source file (because it's
based on the Clang module structure)
Expand testing to be sure that we're getting the right calls,
diagnostics, and generated IR symbols.
Really this applies to any capture, not just
`self`. Also refactor to make it clear that
parent closures and functions are really the only
cases that matter here.
Control enforcement of member import visibility requirements via a new option,
instead of piggy-backing on the existing IgnoreAccessControl option. Adopt the
option when doing fallback lookups for unviable members so that the compiler
can diagnose the reason that a member is inaccessible more reliably.
Previously, with MemberImportVisibility enabled decls with the package access
level could be mis-diagnosed as inaccessible due to their access level when
really they were inaccessible due to a missing import.
Resolves rdar://131501862.
Unfortunately we've encountered another source
breaking case here:
```
class C {
func method() {}
func foo() {
Task { [weak self] in
Task {
method()
}
}
}
}
```
In 5.10 we'd only do the unqualified lookup for
`self` when directly in a `weak self` closure,
but with the implicit self rework, we'd start
using the `weak self` here, leading to a
type-checker error.
At this point, adding more edge cases to the
existing logic is going to make things much more
complicated. Instead, reinstate the 5.10 implicit
self lookup behavior and diagnostic logic,
switching over to the new logic only under Swift 6
mode.
rdar://129475277
Although I don't plan to bring over new assertions wholesale
into the current qualification branch, it's entirely possible
that various minor changes in main will use the new assertions;
having this basic support in the release branch will simplify that.
(This is why I'm adding the includes as a separate pass from
rewriting the individual assertions)
We have two "levels" of name lookup, and the more primitive level is
used by name lookup itself to avoid certain cycles. For example,
extension binding, resolution of inheritance clauses, etc.
One interesting case is that a protocol extension can impose additional
requiremnts on `Self`, and members of the right-hand side type are
visible to unqualified lookup.
The right-hand side of a `Self` requirement in this case is always a
protocol type or class type canonically, but it might be written to
refer to a protocol type alias.
Before some changes for noncopyable generics, the primitive name
lookup mechanism, implemented in directReferencesForTypeRepr() and
such, would check if the TypeRepr had already been resolved by
resolveType(). If so, it would immediately return the decl.
This masked an issue, where the right-hand side of a `Self` requirement
was resolved in the parent DeclContext. A more subtle rule is needed;
for a protocol extension, we must resolve the right-hand side in the
protocol, but disregard the protocol extension's `Self` requirements,
because doing so would recursively trigger the same lookup again.
Fixes rdar://problem/124498054.
When performing name lookup for freestanding macros (e.g., after the
`#`), don't allow types to shadow macros from imported libraries.
Fixes rdar://110429368.
This source location will be used to determine whether to add a name lookup
option to exclude macro expansions when the name lookup request is constructed.
Currently, the source location argument is unused.
The macro name resolution in the source lookup cache was only looking at
macros in the current module, meaning that any names introduced by peer
or declaration macros declared in one module but used in another would
not be found by name lookup.
Switch the source lookup cache over to using the same
`forEachPotentialResolvedMacro` API that is used by lookup within
types, so we have consistent name-lookup-level macro resolution in both
places.
... except that would be horribly cyclic, of course, so introduce name
lookup flags to ignore top-level declarations introduced by macro
expansions. This is semantically correct because macro expansions are
not allowed to introduce new macros anyway, because that would have
been a terrible idea.
Fixes rdar://107321469. Peer and declaration macros at module scope
should work a whole lot better now.
Revert "Remove properties from AST nodes"
This reverts commit e4b8a829fe.
Revert "Suppress more false-positive 'self is unused' warnings"
This reverts commit 35e028e5c2.
Revert "fix warning annotation in test"
This reverts commit dfa1fda3d3.
Revert "Permit implicit self for weak self captures in nonescaping closures in Swift 5 (this is an error in Swift 6)"
This reverts commit 94ef6c4ab4.
* Drop some unused fields
* const-qualify a consumption method that is logically const - though it
isn't physically const given the mutating use in
ASTScopeDeclConsumerForUnqualifiedLookup::lookInMembers
* Privatize some internal fields
Our name lookup rules for the resolution of custom attributes don't
allow for them to find MainActor within the _Concurrency library.
Therefore, hardcode @MainActor to map to _Concurrency.MainActor.
While here, make sure we drop concurrency-specific attributes that
show up in Clang attributes when we aren't in concurrency mode.
This attribute allows to define a pre-specialized entry point of a
generic function in a library.
The following definition provides a pre-specialized entry point for
`genericFunc(_:)` for the parameter type `Int` that clients of the
library can call.
```
@_specialize(exported: true, where T == Int)
public func genericFunc<T>(_ t: T) { ... }
```
Pre-specializations of internal `@inlinable` functions are allowed.
```
@usableFromInline
internal struct GenericThing<T> {
@_specialize(exported: true, where T == Int)
@inlinable
internal func genericMethod(_ t: T) {
}
}
```
There is syntax to pre-specialize a method from a different module.
```
import ModuleDefiningGenericFunc
@_specialize(exported: true, target: genericFunc(_:), where T == Double)
func prespecialize_genericFunc(_ t: T) { fatalError("dont call") }
```
Specially marked extensions allow for pre-specialization of internal
methods accross module boundries (respecting `@inlinable` and
`@usableFromInline`).
```
import ModuleDefiningGenericThing
public struct Something {}
@_specializeExtension
extension GenericThing {
@_specialize(exported: true, target: genericMethod(_:), where T == Something)
func prespecialize_genericMethod(_ t: T) { fatalError("dont call") }
}
```
rdar://64993425
