Rather than just looking at top level in the module, start by searching
the type marked as `@main`. This means that a library that provides a
protocol or superclass that the `@main` type can conform to can specify
an executor in a reasonable manner.
functions to compute them directly without a TypeLowering object, and
change a lot of getTypeLowering call sites to just use that.
There is one subtle change here that I think is okay: SILBuilder used to
use different TypeExpansionContexts when inserting into a global:
- getTypeLowering() always used a minimal context when inserting into
a global
- getTypeExpansionContext() always returned a maximal context for the
module scope
The latter seems more correct, as AFAIK global initializers are never
inlinable. If they are, we probably need to configure the builder with
an actual context properly rather than making global assumptions.
This is incremental progress towards computing this for most types
without a TypeLowering, and hopefully eventually removing TL entirely.
When targeting a platform that predates the introduction of isolated
deinit, make a narrow exception that allows main-actor-isolated deinit
to work through a special, inlineable entrypoint that is
back-deployed. This implementation
1. Calls into the real implementation when available, otherwise
2. Checks if we're on the main thread, destroying immediately when
we are, otherwise
3. Creates a new task on the main actor to handle destruction.
This implementation is less efficient than the implementation in the
runtime, but allows us to back-deploy this functionality as far back
as concurrency goes.
Fixes rdar://151029118.
Key paths can't reference non-escapable or non-copyable storage declarations,
so we don't need to refer to them resiliently, and can elide their property
descriptors.
However, declarations may still be conditionally Copyable and Escapable, and
if so, then they still need a property descriptor for resilient key path
references. When a property or subscript can be used in a context where it
is fully Copyable and Escapable, emit the property descriptor in a generic
environment constrained by the necessary conditional constraints.
Fixes rdar://151628396.
Consider an `@_alwaysEmitIntoClient` function and a custom derivative
defined
for it. Previously, such a combination resulted different errors under
different
circumstances.
Sometimes, there were linker errors due to missing derivative function
symbol -
these occurred when we tried to find the derivative in a module, while
it
should have been emitted into client's code (and it did not happen).
Sometimes, there were SIL verification failures like this:
```
SIL verification failed: internal/private function cannot be serialized or serializable: !F->isAnySerialized() || embedded
```
Linkage and serialization options for the derivative were not handled
properly,
and, instead of PublicNonABI linkage, we had Private one which is
unsupported
for serialization - but we need to serialize `@_alwaysEmitIntoClient`
functions
so the client's code is able to see them.
This patch resolves the issue and adds proper handling of custom
derivatives
of `@_alwaysEmitIntoClient` functions. Note that either both the
function and
its custom derivative or none of them should have
`@_alwaysEmitIntoClient`
attribute, mismatch in this attribute is not supported.
The following cases are handled (assume that in each case client's code
uses
the derivative).
1. Both the function and its derivative are defined in a single file in
one module.
2. Both the function and its derivative are defined in different files
which
are compiled to a single module.
3. The function is defined in one module, its derivative is defined in
another
module.
4. The function and the derivative are defined as members of a protocol
extension in two separate modules - one for the function and one for the
derivative. A struct conforming the protocol is defined in the third
module.
5. The function and the derivative are defined as members of a struct
extension in two separate modules - one for the function and one for the
derivative.
The changes allow to define derivatives for methods of `SIMD`.
Fixes#54445
<!--
If this pull request is targeting a release branch, please fill out the
following form:
https://github.com/swiftlang/.github/blob/main/PULL_REQUEST_TEMPLATE/release.md?plain=1
Otherwise, replace this comment with a description of your changes and
rationale. Provide links to external references/discussions if
appropriate.
If this pull request resolves any GitHub issues, link them like so:
Resolves <link to issue>, resolves <link to another issue>.
For more information about linking a pull request to an issue, see:
https://docs.github.com/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue
-->
<!--
Before merging this pull request, you must run the Swift continuous
integration tests.
For information about triggering CI builds via @swift-ci, see:
https://github.com/apple/swift/blob/main/docs/ContinuousIntegration.md#swift-ci
Thank you for your contribution to Swift!
-->
Custom main and global executors work hasn't passed Swift Evolution yet,
so we need to avoid leaking it as API until it does.
To that end, underscore all the things.
rdar://151147606
Due to a bug in how macros on nodes imported from clang are evaluated,
their function body is not always type checked. This forces type
checking before silgen of a macro originating on a node imported from
clang, to prevent crashing in silgen.
rdar://150940383
Some notes:
1. In most cases, I think we were getting lucky with this by just inferring the
closure's isolation from its decl context. In the specific case that we were
looking at here, this was not true since we are returning from an @concurrent
async function a nonisolated(nonsending) method that closes over self. This
occurs since even when NonisolatedNonsendingByDefault we want to start importing
objc async functions as nonisolated(nonsending).
2. I also discovered that in the ActorIsolationChecker we were not visiting the
inner autoclosure meaning that we never set the ActorIsolation field on the
closure. After some discussion with @xedin about potentially visiting the
function in the ActorIsolationChecker, we came to the conclusion that this was
likely to result in source stability changes. So we put in a targeted fix just
for autoclosures in this specific case by setting their actor isolation in the
type checker.
3. Beyond adding tests to objc_async_from_swift to make sure that when
NonisolatedNonsendingByDefault is disabled we do the right thing, I noticed that
we did not have any tests that actually tested the behavior around
objc_async_from_swift when NonisolatedNonsendingByDefault is enabled. So I added
the relevant test lines so we can be sure that we get correct behavior in such a
case.
rdar://150209093
Don't bind references to storage to use (new ABI) coroutine accessors
unless they're guaranteed to be available. For example, when building
against a resilient module that has coroutine accessors, they can only
be used if the deployment target is >= the version of Swift that
includes the feature.
rdar://148783895
We decided that using a magic typealias to set the executor factory was better
than using a compiler option. Remove the `-executor-factory` option, and replace
by looking up the `DefaultExecutorFactory` type, first in the main module, and
then if that fails in Concurrency.
rdar://149058236
Tweaked diagnostic to use a string instead of a type. Renamed the
feature in `FeatureAvailability.def` (and added the `TaskExecutor`
feature to 6.2). Also fixed the `swift_getActiveExecutor()`
function to return the main executor only when on the main thread.
rdar://141348916
Adds assertions in various places where properties that can vary between ABI-only decls and their counterparts—particularly function and parameter attributes—are handled in SILGen, ensuring that we don’t accidentally end up processing ABI-only decls there.
Added an `-executor-factory` argument to the compiler to let you safely
specify the executors you wish to use (by naming a type that returns
them).
Also added some tests of the new functionality.
rdar://141348916
I also want to extend it and did not want to have to copy/paste this code into
multiple places.
The small test tweak occurs since I changed the initializer SILGen emission code
to set the declref field of SILFunctions to the actual decl ref which we did not
before. So we got a more specific diagnostic.
When a protocol which has a read (or modify) requirement is built with
the CoroutineAccessors feature, it gains a read2 (or modify2,
respectively) requirement. For this to be compatible with binaries
built without the feature, a default implementation for these new
requirements must be provided. Cause these new accessor requirements to
have default implementations by returning `true` from
`doesAccessorHaveBody` when the context is a `ProtocolDecl` and the
relevant availability check passes.
The reason why is that we want to distinguish inbetween SILFunction's that are
marked as unspecified by SILGen and those that are parsed from textual SIL that
do not have any specified isolation. This will make it easier to write nice
FileCheck tests against SILGen output on what is the inferred isolation for
various items.
NFCI.
In order for availability checks in iOS apps to be evaluated correctly when
running on macOS, the application binary must call a copy of
`_stdlib_isOSVersionAtLeast_AEIC()` that was emitted into the app, instead of
calling the `_stdlib_isOSVersionAtLeast()` function provided by the standard
library. This is because the call to the underlying compiler-rt function
`__isPlatformVersionAtLeast()` must be given the correct platform identifier
argument; if the call is not emitted into the client, then the macOS platform
identifier is used and the iOS version number will be mistakenly interpreted as
a macOS version number at runtime.
The `_stdlib_isOSVersionAtLeast()` function in the standard library is marked
`@_transparent` on iOS so that its call to `_stdlib_isOSVersionAtLeast_AEIC()`
is always inlined into the client. This works for the code generated by normal
`if #available` checks, but for the `@backDeployed` function thunks, the calls
to `_stdlib_isOSVersionAtLeast()` were not being inlined and that was causing
calls to `@backDeployed` functions to crash in iOS apps running on macOS since
their availability checks were being misevaluated.
The SIL optimizer has a heuristic which inhibits mandatory inlining in
functions that are classified as thunks, in order to save code size. This
heuristic needs to be relaxed in `@backDeployed` thunks, so that mandatory
inlining of `_stdlib_isOSVersionAtLeast()` can behave as expected. The change
should be safe since the only `@_transparent` function a `@backDeployed` thunk
is ever expected to call is `_stdlib_isOSVersionAtLeast()`.
Resolves rdar://134793410.
If a function body is emitted, all of the declarations inside that function
body must be emitted, too. Previously, lazy var initializers were being skipped
regardless of whether the function containing them was skipped, resulting in
SIL verification errors (which were correctly predicting linker errors).
Resolves rdar://134708502.
