The recursivelyDeleteTriviallyDeadInstructions utility takes a
callBack to be called for every deleted instruction. However, it
wasn't passing this callBack to eraseFromParentWithdebugInsts. The
callback was used to update an iterator in some cases, so not calling
it resulted in iterator invalidation.
Doing this also cleans up the both APIs:
recursivelyDeleteTriviallyDeadInstructions and eraseFromParentWithdebugInsts.
The ownership kind is Any for trivial types, or Owned otherwise, but
whether a type is trivial or not will soon depend on the resilience
expansion.
This means that a SILModule now uniques two SILUndefs per type instead
of one, and serialization uses two distinct sentinel IDs for this
purpose as well.
For now, the resilience expansion is not actually used here, so this
change is NFC, other than changing the module format.
Beside fixing the compiler crash, this change also improves the stack-nesting correction mechanisms in the inliners:
* Instead of trying to correct the nesting after each inlining of a callee, correct the nesting once when inlining is finished for a caller function.
This fixes a potential compile time problem, because StackNesting iterates over the whole function.
In worst case this can lead to quadratic behavior in case many begin_apply instructions with overlapping stack locations are inlined.
* Because we are doing it only once for a caller, we can remove the complex logic for checking if it is necessary.
We can just do it unconditionally in case any coroutine gets inlined.
The inliners iterate over all instruction of a function anyway, so this does not increase the computational complexity (StackNesting is roughly linear with the number of instructions).
rdar://problem/47615442
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Inlining has always been quadratic for no good reason. There was a
special hack for single-block callees that allowed linear inlining.
Instead, the now iterates over blocks and instructions in reverse,
splitting blocks as it inlines. There no longer needs to be special
case for single block callees, and the inliner is linear for all kinds
of callees.
This further simplifies and cleans up the code. There are just a few
basic invariants that the common inliner needs to provide about how
blocks are split and laid out. We can do this if we don't add hacks
for special cases within the inliner. Those invariants allow the
inliner clients to be much simpler and more efficient.
PerformanceInliner still needs to be fixed.
Fixes SR-9223: Inliner exhibits slow compilation time with a large
static array.
A recent SILCloner rewrite removed a special case hack for single
basic block callee functions:
commit c6865c0dff
Merge: 76e6c4157e9e440d13a6
Author: Andrew Trick <atrick@apple.com>
Date: Thu Oct 11 14:23:32 2018
Merge pull request #19786 from atrick/silcloner-cleanup
SILCloner and SILInliner rewrite.
Instead, the new inliner simply merges trivial unconditional branches
after inlining the return block. This way, the CFG is always in
canonical state after inlining. This is more robust, and avoids
interfering with subsequent SIL passes when non-single-block callees
are inlined.
The problem is that inlining a series of calls within a large block
could result in interleaved block splitting and merging operations,
which is quadratic in the block size. This showed up when inlining the
tens of thousands of array subscript calls emitted for a large array
initialization.
The first half of the fix is to simply defer block merging until all
calls are inlined. We can't expect SimplifyCFG to run immediately
after inlining, nor would we want to do that, *especially* for
mandatory inlining. This fix instead exposes block merging as a
trivial utility.
Note: by eliminating some unconditional branches, this change could
reduce the number of debug locations emitted. This does not
fundamentally change any debug information guarantee, and I was unable
to observe any behavior difference in the debugger.
SILBuilder contains a SILBuilderContext which contains a SILModule which
has a deleted operator=. Assigning an Optional<BeginApplySite> causes MSVC
to attempt to create operator= for SILBuilder which fails due to the
deleted operator=. This changes BeginApplySite to use a SILBuilder*
instead of a SILBuilder& to get around it.
Mostly functionally neutral:
- may fix latent bugs.
- may reduce useless basic blocks after inlining.
This rewrite encapsulates the cloner's internal state, providing a
clean API for the CRTP subclasses. The subclasses are rewritten to use
the exposed API and extension points. This makes it much easier to
understand, work with, and extend SIL cloners, which are central to
many optimization passes. Basic SIL invariants are now clearly
expressed and enforced. There is no longer a intricate dance between
multiple levels of subclasses operating on underlying low-level data
structures. All of the logic needed to keep the original SIL in a
consistent state is contained within the SILCloner itself. Subclasses
only need to be responsible for their own modifications.
The immediate motiviation is to make CFG updates self-contained so
that SIL remains in a valid state. This will allow the removal of
critical edge splitting hacks and will allow general SIL utilities to
take advantage of the fact that we don't allow critical edges.
This rewrite establishes a simple principal that should be followed
everywhere: aside from the primitive mutation APIs on SIL data types,
each SIL utility is responsibile for leaving SIL in a valid state and
the logic for doing so should exist in one central location.
This includes, for example:
- Generating a valid CFG, splitting edges if needed.
- Returning a valid instruction iterator if any instructions are removed.
- Updating dominance.
- Updating SSA (block arguments).
(Dominance info and SSA properties are fundamental to SIL verification).
LoopInfo is also somewhat fundamental to SIL, and should generally be
updated, but it isn't required.
This also fixes some latent bugs related to iterator invalidation in
recursivelyDeleteTriviallyDeadInstructions and SILInliner. Note that
the SILModule deletion callback should be avoided. It can be useful as
a simple cache invalidation mechanism, but it is otherwise bug prone,
too limited to be very useful, and basically bad design. Utilities
that mutate should return a valid instruction iterator and provide
their own deletion callbacks.
I changed all of the places that used end_borrow_argument to use end_borrow.
NOTE: I discovered in the process of this patch that we are not verifying
guaranteed block arguments completely. I disabled the tests here that show this
bad behavior and am going to re-enable them with more tests in a separate PR.
This has not been a problem since SILGen does not emit any such arguments as
guaranteed today. But once I do the SILGenPattern work this will change.
rdar://33440767
The current inlining strategy doesn't support inlining coroutines
when there are multiple end_apply or abort_apply instructions in
the caller, so refuse to inline such cases. Also, handle the case
where there are no yield instructions in the callee, which can
happen if e.g. the callee calls a no-return function.
I also simplified the code somewhat by removing the vestiges of the
code that tried to unify control flow with switches.
As an unrelated fix, suppress function signature optimization for
coroutines for now.
This works around a potential circular dependence issue where TypeSubstCloner
needs access to SILOptFunctionBuilder but is in libswiftSIL.
rdar://42301529
This patch adds SIL-level debug info support for variables whose
static type is rewritten by an optimizer transformation. When a
function is (generic-)specialized or inlined, the static types of
inlined variables my change as they are remapped into the generic
environment of the inlined call site. With this patch all inlined
SILDebugScopes that point to functions with a generic signature are
recursively rewritten to point to clones of the original function with
new unique mangled names. The new mangled names consist of the old
mangled names plus the new substituions, similar (or exactly,
respectively) to how generic specialization is handled.
On libSwiftCore.dylib (x86_64), this yields a 17% increase in unique
source vars and a ~24% increase in variables with a debug location.
rdar://problem/28859432
rdar://problem/34526036
This patch adds SIL-level debug info support for variables whose
static type is rewritten by an optimizer transformation. When a
function is (generic-)specialized or inlined, the static types of
inlined variables my change as they are remapped into the generic
environment of the inlined call site. With this patch all inlined
SILDebugScopes that point to functions with a generic signature are
recursively rewritten to point to clones of the original function with
new unique mangled names. The new mangled names consist of the old
mangled names plus the new substituions, similar (or exactly,
respectively) to how generic specialization is handled.
On libSwiftCore.dylib (x86_64), this yields a 17% increase in unique
source vars and a ~24% increase in variables with a debug location.
rdar://problem/28859432
rdar://problem/34526036
Mandatory pass will clean it up and replace it by a copy_block and
is_escaping/cond_fail/release combination on the %closure in follow-up
patches.
The instruction marks the dependence of a block on a closure that is
used as an 'withoutActuallyEscaping' sentinel.
rdar://39682865
Will be used to verify that withoutActuallyEscaping's block does not
escape the closure.
``%escaping = is_escaping_closure %closure`` tests the reference count. If the
closure is not uniquely referenced it prints out and error message and
returns true. Otherwise, it returns false. The returned result can be
used with a ``cond_fail %escaping`` instruction to abort the program.
rdar://35525730
@noescape function types will eventually be trivial. A
convert_escape_to_noescape instruction does not take ownership of its
operand. It is a projection to the trivial value carried by the closure
-- both context and implementation function viewed as a trivial value.
A safe SIL program must ensure that the object that the project value is based
on is live beyond the last use of the trivial value. This will be
achieve by means of making the lifetimes dependent.
For example:
%e = partial_apply [callee_guaranteed] %f(%z) : $@convention(thin) (Builtin.Int64) -> ()
%n = convert_escape_to_noescape %e : $@callee_guaranteed () -> () to $@noescape @callee_guaranteed () -> ()
%n2 = mark_dependence %n : $@noescape @callee_guaranteed () -> () on %e : $@callee_guaranteed () -> ()
%f2 = function_ref @use : $@convention(thin) (@noescape @callee_guaranteed () -> ()) -> ()
apply %f2(%n2) : $@convention(thin) (@noescape @callee_guaranteed () -> ()) -> ()
release_value %e : $@callee_guaranteed () -> ()
Note: This is not yet actually used.
Part of:
SR-5441
rdar://36116691
* Reduce array abstraction on apple platforms dealing with literals
Part of the ongoing quest to reduce swift array literal abstraction
penalties: make the SIL optimizer able to eliminate bridging overhead
when dealing with array literals.
Introduce a new classify_bridge_object SIL instruction to handle the
logic of extracting platform specific bits from a Builtin.BridgeObject
value that indicate whether it contains a ObjC tagged pointer object,
or a normal ObjC object. This allows the SIL optimizer to eliminate
these, which allows constant folding a ton of code. On the example
added to test/SILOptimizer/static_arrays.swift, this results in 4x
less SIL code, and also leads to a lot more commonality between linux
and apple platform codegen when passing an array literal.
This also introduces a couple of SIL combines for patterns that occur
in the array literal passing case.
This replaces the '[volatile]' flag. Now, class_method and
super_method are only used for vtable dispatch.
The witness_method instruction is still overloaded for use
with both ObjC protocol requirements and Swift protocol
requirements; the next step is to make it only mean the
latter, also using objc_method for ObjC protocol calls.
