Merge with ContextualizeClosuresAndMacros, and
rename to ContextualizationWalker given that it
re-contextualizes a whole bunch of AST nodes now.
This ensures we correctly handle cases such as
decls in if/switch expressions within autoclosures.
Type annotations for instruction operands are omitted, e.g.
```
%3 = struct $S(%1, %2)
```
Operand types are redundant anyway and were only used for sanity checking in the SIL parser.
But: operand types _are_ printed if the definition of the operand value was not printed yet.
This happens:
* if the block with the definition appears after the block where the operand's instruction is located
* if a block or instruction is printed in isolation, e.g. in a debugger
The old behavior can be restored with `-Xllvm -sil-print-types`.
This option is added to many existing test files which check for operand types in their check-lines.
Find all the usages of `--enable-experimental-feature` or
`--enable-upcoming-feature` in the tests and replace some of the
`REQUIRES: asserts` to use `REQUIRES: swift-feature-Foo` instead, which
should correctly apply to depending on the asserts/noasserts mode of the
toolchain for each feature.
Remove some comments that talked about enabling asserts since they don't
apply anymore (but I might had miss some).
All this was done with an automated script, so some formatting weirdness
might happen, but I hope I fixed most of those.
There might be some tests that were `REQUIRES: asserts` that might run
in `noasserts` toolchains now. This will normally be because their
feature went from experimental to upcoming/base and the tests were not
updated.
Impose the same limit we impose on other
forms of control flow statements (e.g `break`,
`continue`, `return`), where it cannot transfer
control out of the expression. This fixes a crash
where we'd fail to find a fallthrough nested in an
`if` expression. It is technically source breaking,
as we would have allowed the case where the `if`
expression is a directly nested result of an outer
`switch` expression, but I would be very surprised
if anyone is relying on that.
rdar://133845101
With `if`/`switch` expressions, we may now have
local bindings within lazy initializers, and
therefore need to ensure we correctly
re-contextualize them. Adjust the walker to set
the DeclContext for all decls it encounters,
and make sure it handles some cases that the
ASTWalker does not currently visit.
rdar://119158202
If we have an uninhabited branch, emit it as an
ignored expr followed by an unreachable.
Previously we would omit the unreachable and rely
on the SILOptimizer to infer it, but we ought to
just emit it here. Also check `isUninhabited()`
instead of `isStructurallyUninhabited` since this
better matches what we allow in Sema. For tuples
of uninhabited values, we can do a regular
initialization without issue.
Move out-of-place SingleValueStmtExpr checking into
`performSyntacticExprDiagnostics`, to ensure we
catch all expressions. Previously we did the walk
as a part of Decl-based MiscDiagnostics, but it
turns out that can miss expressions in property
initializers, subscript default arguments, and
custom attrs.
This does mean that we'll now no longer diagnose
out-of-place if/switch exprs if the expression
didn't type-check, but that's consistent with the
rest of MiscDiagnostics, and I don't think it will
be a major issue in practice. We probably ought to
consider moving this checking into PreCheckExpr,
but that would require first separating out
SequenceExpr folding, which has other consequences,
and so I'm leaving as future work for now.
`Initialization` is stateful and not meant to be emitted into multiple times across different contexts.
If emitting into an initialization causes it to be split or aborted, that will carry over into
further uses of the initialization. This was happening during `if` and `switch` expression
emission, leading to miscompiles or compiler crashes. Fix this by saving only the buffer when
we prepare emission for a statement expression, and creating the initialization in the scope
where the expression for a branch actually gets emitted. Fixes rdar://112213253.
When emitting the underlying `switch` statement
for a `switch` expression, we emit an `unreachable`
if the subject is uninhabited. Statement emission
code can handle this, but expression emission expects
an RValue to handed back. To remedy this, emit
an unreachable block that we can emit the rest of
the expression emission code into. The SILOptimizer
will then drop this unreachable block.
Make sure we look through a wrapping
`OptionalEvaluationExpr` and its injections when
looking for an assignment to mark a valid if/switch
source expression.
rdar://109305454
Previously we could miss the scopes present in
if/switch expressions if they were nested in
another expression, such as an AssignExpr. Fix
the logic such that we properly walk over a given
expression looking for if/switch scopes, the same
as what we do for closures.
rdar://109192116
- Allow an if/switch expression to become an
implicit return of a function that has a `#if`
body with a single active element that is an `if`
or `switch`.
- Allow `#if` branches of an if/switch expression,
as long as there is a single active expression
element.
rdar://107487977
Introduce SingleValueStmtExpr, which allows the
embedding of a statement in an expression context.
This then allows us to parse and type-check `if`
and `switch` statements as expressions, gated
behind the `IfSwitchExpression` experimental
feature for now. In the future,
SingleValueStmtExpr could also be used for e.g
`do` expressions.
For now, only single expression branches are
supported for producing a value from an
`if`/`switch` expression, and each branch is
type-checked independently. A multi-statement
branch may only appear if it ends with a `throw`,
and it may not `break`, `continue`, or `return`.
The placement of `if`/`switch` expressions is also
currently limited by a syntactic use diagnostic.
Currently they're only allowed in bindings,
assignments, throws, and returns. But this could
be lifted in the future if desired.
In a previous commit, I banned in the verifier any SILValue from producing
ValueOwnershipKind::Any in preparation for this.
This change arises out of discussions in between John, Andy, and I around
ValueOwnershipKind::Trivial. The specific realization was that this ownership
kind was an unnecessary conflation of the a type system idea (triviality) with
an ownership idea (@any, an ownership kind that is compatible with any other
ownership kind at value merge points and can only create). This caused the
ownership model to have to contort to handle the non-payloaded or trivial cases
of non-trivial enums. This is unnecessary if we just eliminate the any case and
in the verifier separately verify that trivial => @any (notice that we do not
verify that @any => trivial).
NOTE: This is technically an NFC intended change since I am just replacing
Trivial with Any. That is why if you look at the tests you will see that I
actually did not need to update anything except removing some @trivial ownership
since @any ownership is represented without writing @any in the parsed sil.
rdar://46294760
The SILGen testsuite consists of valid Swift code covering most language
features. We use these tests to verify that no unknown nodes are in the
file's libSyntax tree. That way we will (hopefully) catch any future
changes or additions to the language which are not implemented in
libSyntax.
Stop creating ImplicitlyUnwrappedOptional<T> so that we can remove it
from the type system.
Enable the code that generates disjunctions for Optional<T> and
rewrites expressions based on the original declared type being 'T!'.
Most of the changes supporting this were previously merged to master,
but some things were difficult to merge to master without actually
removing IUOs from the type system:
- Dynamic member lookup and dynamic subscripting
- Changes to ensure the bridging peephole still works
Past commits have attempted to retain as much fidelity with how we
were printing things as possible. There are some cases where we still
are not printing things the same way:
- In diagnostics we will print '?' rather than '!'
- Some SourceKit and Code Completion output where we print a Type
rather than Decl.
Things like module printing via swift-ide-test attempt to print '!'
any place that we now have Optional types that were declared as IUOs.
There are some diagnostics regressions related to the fact that we can
no longer "look through" IUOs. For the same reason some output and
functionality changes in Code Completion. I have an idea of how we can
restore these, and have opened a bug to investigate doing so.
There are some small source compatibility breaks that result from
this change:
- Results of dynamic lookup that are themselves declared IUO can in
rare circumstances be inferred differently. This shows up in
test/ClangImporter/objc_parse.swift, where we have
var optStr = obj.nsstringProperty
Rather than inferring optStr to be 'String!?', we now infer this to
be 'String??', which is in line with the expectations of SE-0054.
The fact that we were only inferring the outermost IUO to be an
Optional in Swift 4 was a result of the incomplete implementation of
SE-0054 as opposed to a particular design. This should rarely cause
problems since in the common-case of actually using the property rather
than just assigning it to a value with inferred type, we will behave
the same way.
- Overloading functions with inout parameters strictly by a difference
in optionality (i.e. Optional<T> vs. ImplicitlyUnwrappedOptional<T>)
will result in an error rather than the diagnostic that was added
in Swift 4.1.
- Any place where '!' was being used where it wasn't supposed to be
allowed by SE-0054 will now treat the '!' as if it were '?'.
Swift 4.1 generates warnings for these saying that putting '!'
in that location is deprecated. These locations include for example
typealiases or any place where '!' is nested in another type like
`Int!?` or `[Int!]`.
This commit effectively means ImplicitlyUnwrappedOptional<T> is no
longer part of the type system, although I haven't actually removed
all of the code dealing with it yet.
ImplicitlyUnwrappedOptional<T> is is dead, long live implicitly
unwrapped Optional<T>!
Resolves rdar://problem/33272674.
Note that the bug was in Sema, but I added a SILGen test, since
that's an easy way to ensure the AST is valid.
Unfortunately the AST verifier does not perform many checks when
we emit diagnostics; adding the test case to an existing Sema test
would not catch regressions.
Fixes <rdar://problem/31595572>.
Officially kick SILBoxType over to be "nominal" in its layout, with generic layouts structurally parameterized only by formal types. Change SIL to lower a capture to a nongeneric box when possible, or a box capturing the enclosing generic context when necessary.
Use a syntax that declares the layout's generic parameters and fields,
followed by the generic arguments to apply to the layout:
{ var Int, let String } // A concrete box layout with a mutable Int
// and immutable String field
<T, U> { var T, let U } <Int, String> // A generic box layout,
// applied to Int and String
// arguments
And use project_box to get to the address value.
SILGen now generates a project_box for each alloc_box.
And IRGen re-uses the address value from the alloc_box if the operand of project_box is an alloc_box.
This lets the generated code be the same as before.
Other than that most changes of this (quite large) commit are straightforward.
Debug variable info may be attached to debug_value, debug_value_addr,
alloc_box, and alloc_stack instructions.
In order to write textual SIL -> SIL testcases that exercise the handling
of debug information by SIL passes, we need to make a couple of additions
to the textual SIL language. In memory, the debug information attached to
SIL instructions references information from the AST. If we want to create
debug info from parsing a textual .sil file, these bits need to be made
explicit.
Performance Notes: This is memory neutral for compilations from Swift
source code, because the variable name is still stored in the AST. For
compilations from textual source the variable name is stored in tail-
allocated memory following the SIL instruction that introduces the
variable.
<rdar://problem/22707128>
All refutable patterns and function parameters marked with 'var'
is now an error.
- Using explicit 'let' keyword on function parameters causes a warning.
- Don't suggest making function parameters mutable
- Remove uses in the standard library
- Update tests
rdar://problem/23378003
Most tests were using %swift or similar substitutions, which did not
include the target triple and SDK. The driver was defaulting to the
host OS. Thus, we could not run the tests when the standard library was
not built for OS X.
Swift SVN r24504
This avoids a pointless copy every time an array literal is written, and will let us retire the horrible "alloc_array" instruction and globs of broken IRGen code. Implements rdar://problem/16386862, and probably fixes a bunch of bugs related to alloc_array brokenness.
Swift SVN r22289
Now the SILLinkage for functions and global variables is according to the swift visibility (private, internal or public).
In addition, the fact whether a function or global variable is considered as fragile, is kept in a separate flag at SIL level.
Previously the linkage was used for this (e.g. no inlining of less visible functions to more visible functions). But it had no effect,
because everything was public anyway.
For now this isFragile-flag is set for public transparent functions and for everything if a module is compiled with -sil-serialize-all,
i.e. for the stdlib.
For details see <rdar://problem/18201785> Set SILLinkage correctly and better handling of fragile functions.
The benefits of this change are:
*) Enable to eliminate unused private and internal functions
*) It should be possible now to use private in the stdlib
*) The symbol linkage is as one would expect (previously almost all symbols were public).
More details:
Specializations from fragile functions (e.g. from the stdlib) now get linkonce_odr,default
linkage instead of linkonce_odr,hidden, i.e. they have public visibility.
The reason is: if such a function is called from another fragile function (in the same module),
then it has to be visible from a third module, in case the fragile caller is inlined but not
the specialized function.
I had to update lots of test files, because many CHECK-LABEL lines include the linkage, which has changed.
The -sil-serialize-all option is now handled at SILGen and not at the Serializer.
This means that test files in sil format which are compiled with -sil-serialize-all
must have the [fragile] attribute set for all functions and globals.
The -disable-access-control option doesn't help anymore if the accessed module is not compiled
with -sil-serialize-all, because the linker will complain about unresolved symbols.
A final note: I tried to consider all the implications of this change, but it's not a low-risk change.
If you have any comments, please let me know.
Swift SVN r22215
