Type annotations for instruction operands are omitted, e.g.
```
%3 = struct $S(%1, %2)
```
Operand types are redundant anyway and were only used for sanity checking in the SIL parser.
But: operand types _are_ printed if the definition of the operand value was not printed yet.
This happens:
* if the block with the definition appears after the block where the operand's instruction is located
* if a block or instruction is printed in isolation, e.g. in a debugger
The old behavior can be restored with `-Xllvm -sil-print-types`.
This option is added to many existing test files which check for operand types in their check-lines.
It is necessary for opaque values where for casts that will newly start
out as checked_cast_brs and be lowered to checked_cast_addr_brs, since
the latter has the source formal type, IRGen relies on being able to
access it, and there's no way in general to obtain the source formal
type from the source lowered type.
Types that have "value semantics" should not have lexical lifetimes.
Value types are not expected to have custom deinits. Are not expected to
expose unsafe interior pointers. And cannot have weak references because
they are structs. Therefore, deinitialization barriers are irrelevant.
rdar://107076869
This change ensures all store_borrows are ended with an end_borrow, and uses of the store_borrow
destination are all in the enclosing store_borrow scope and via the store_borrow return address.
Fix tests to reflect new store_borrow pattern
* [SILGenFunction] Don't create redundant nested debug scopes
Instead of emitting:
```
sil_scope 4 { loc "main.swift":6:19 parent 3 }
sil_scope 5 { loc "main.swift":7:3 parent 4 }
sil_scope 6 { loc "main.swift":7:3 parent 5 }
sil_scope 7 { loc "main.swift":7:3 parent 5 }
sil_scope 8 { loc "main.swift":9:5 parent 4 }
```
Emit:
```
sil_scope 4 { loc "main.swift":6:19 parent 3 }
sil_scope 5 { loc "main.swift":7:3 parent 4 }
sil_scope 6 { loc "main.swift":9:5 parent 5 }
```
* [IRGenSIL] Diagnose conflicting shadow copies
If we attempt to store a value with the wrong type into a slot reserved
for a shadow copy, diagnose what went wrong.
* [SILGenPattern] Defer debug description of case variables
Create unique nested debug scopes for a switch, each of its case labels,
and each of its case bodies. This looks like:
```
switch ... { // Enter scope 1.
case ... : // Enter scope 2, nested within scope 1.
<body-1> // Enter scope 3, nested within scope 2.
case ... : // Enter scope 4, nested within scope 1.
<body-2> // Enter scope 5, nested within scope 4.
}
```
Use the new scope structure to defer emitting debug descriptions of case
bindings. Specifically, defer the work until we can nest the scope for a
case body under the scope for a pattern match.
This fixes SR-7973, a problem where it was impossible to inspect a case
binding in lldb when stopped at a case with multiple items.
Previously, we would emit the debug descriptions too early (in the
pattern match), leading to duplicate/conflicting descriptions. The only
reason that the ambiguous description was allowed to compile was because
the debug scopes were nested incorrectly.
rdar://41048339
* Update tests
SIL type lowering erases DynamicSelfType, so we generate
incorrect code when casting to DynamicSelfType. Fixing this
requires a fair amount of plumbing, but most of the
changes are mechanical.
Note that the textual SIL syntax for casts has changed
slightly; the target type is now a formal type without a '$',
not a SIL type.
Also, the unconditional_checked_cast_value and
checked_cast_value_br instructions now take the _source_
formal type as well, just like the *_addr forms they are
intended to replace.
In SILGenPattern, we need to be able to unforward cleanups when we explode
tuples. Thus we can't use RValue in SILGenPattern since it may implicitly
explode tuples (which without modifying RValue itself we can not
unforward). This patch removes a specific RValue usage that we can replace with
the use of a ManagedValue instead.
rdar://49903264
There was a bug here where we were emitting a shared case if we had arguments.
That is why we needed the hacked in deletion of that block when we emitted
shared blocks. I was able to replace that with an assert to make sure that we do
not regress.
This additionally improved our code generation by eliminating a potential extra
copy when we had such a case. That is where the test updates come from.
In a previous commit, I banned in the verifier any SILValue from producing
ValueOwnershipKind::Any in preparation for this.
This change arises out of discussions in between John, Andy, and I around
ValueOwnershipKind::Trivial. The specific realization was that this ownership
kind was an unnecessary conflation of the a type system idea (triviality) with
an ownership idea (@any, an ownership kind that is compatible with any other
ownership kind at value merge points and can only create). This caused the
ownership model to have to contort to handle the non-payloaded or trivial cases
of non-trivial enums. This is unnecessary if we just eliminate the any case and
in the verifier separately verify that trivial => @any (notice that we do not
verify that @any => trivial).
NOTE: This is technically an NFC intended change since I am just replacing
Trivial with Any. That is why if you look at the tests you will see that I
actually did not need to update anything except removing some @trivial ownership
since @any ownership is represented without writing @any in the parsed sil.
rdar://46294760
This is the last part of SILGen conditionalized on EnableSILOwnership being
set. It also (as you can tell from the diff) eliminates a bunch of code from the
tests.
rdar://29791263
This is the enum element analogue of the tuple fixup in:
359eda52e5. Additionally as a nice fixup I can now
enable ownership verification on most of the switch code.
I ran into commit ordering issues with cleaning up the address only part of the
emitEnumElement so I included it in this commit. Specifically this was because I
realized that it was possible to get a copy_on_success with an object from this
code and I wanted to enforce the invariant that ConsumptionManagedValues only
have copy_on_success with addresses and borrow_always with objects. It was less
convoluted to just fix the address only code to fit that formulation rather than
shoe-horn the old code into the new form.
rdar://29791263
integer protocols changed the way basic arithmetic operations were
called. <rdar://29939484> has more information.
This commit re-enables those tests and updates the SIL that was checked
in the tests to be consistent with the one generated by the current
compiler.
<rdar://29939484>
To do this the commit does a few things:
1. If we enter the tuple dispatch code with an address that is loadable, we
always immediately perform a load_borrow and change the consumable managed value
to BorrowAlways.
2. If we have a take_on_success object, we immediately borrow. We do not want to
do with TakeOnSuccess since we want to define away the need to unforward since
unforwarding recreates a destroy on the already invalidated parent tuple object.
Notice that this code still handles TakeAlways so in simple cases where we have
a +1 value, everything still works.
Since emitTupleDispatchWithOwnership now handles only objects, I renamed it to
emitTupleObjectDispatch.
rdar://29791263
This does not eliminate the entrypoints on SILBuilder yet. I want to do this in
two parts so that it is functionally easier to disentangle changing the APIs
above SILBuilder and changing the underlying instruction itself.
rdar://33440767
This is how we originally controlled whether or not we printed out ownership
annotations when we printed SIL. Since then, I have changed (a few months ago I
believe) the ownership model eliminator to know how to eliminate these
annotations from the SIL itself. So this hack can be removed.
As an additional benefit, this will let me rename -enable-sil-ownership to
-enable-sil-ownership-verifier. This will I hope eliminate confusion around this
option in the short term while I am preparing to work on semantic sil again.
rdar://42509812
The SILGen testsuite consists of valid Swift code covering most language
features. We use these tests to verify that no unknown nodes are in the
file's libSyntax tree. That way we will (hopefully) catch any future
changes or additions to the language which are not implemented in
libSyntax.
I am going to leave in the infrastructure around this just in case. But there is
no reason to keep this in the tests themselves. I can always just revert this
and I don't think merge conflicts are likely due to previous work I did around
the tooling for this.
Otherwise, the plus_zero_* tests will have plus_zero_* as a module name, causing
massive FileCheck problems.
The reason why I am doing it with the main tests is so that I can use it when
syncing branches/etc.
radar://34222540
The `cmv.getValue() == value` check here seems fishy, since the downstream case block should always take ownership of the bound values. Now that `copy_value`s produce new defs, it's also never true when it would've been true using the `retain/release_value` model, leading us to fail to copy values when necessary.
Officially kick SILBoxType over to be "nominal" in its layout, with generic layouts structurally parameterized only by formal types. Change SIL to lower a capture to a nongeneric box when possible, or a box capturing the enclosing generic context when necessary.
Use a syntax that declares the layout's generic parameters and fields,
followed by the generic arguments to apply to the layout:
{ var Int, let String } // A concrete box layout with a mutable Int
// and immutable String field
<T, U> { var T, let U } <Int, String> // A generic box layout,
// applied to Int and String
// arguments
