Even if an indirect argument is unused, pretend that the function reads from it.
If the unused argument is passed to another generic function and that function is specialized,
the argument may be re-abstracted and the specializer inserts a load from the indirect argument.
Therefore we must be prepared that unused indirect argument might get loaded from at some time.
Fixes a compiler crash
rdar://168623362
This new OSSA invariant simplifies many optimizations because they don't have to take care of the corner case of incomplete lifetimes in dead-end blocks.
The implementation basically consists of these changes:
* add the lifetime completion utility
* add a flag in SILFunction which tells optimization that they need to run the lifetime completion utility
* let all optimizations complete lifetimes if necessary
* enable the ownership verifier to check complete lifetimes
These two new invariants eliminate corner cases which caused bugs if optimization didn't handle them.
Also, it will significantly simplify lifetime completion.
The implementation basically consists of these changes:
* add a flag in SILFunction which tells optimization if they need to take care of infinite loops
* add a utility to break infinite loops
* let all optimizations remove unreachable blocks and break infinite loops if necessary
* add verification to check the new SIL invariants
The new `breakIfniniteLoops` utility breaks infinite loops in the control flow by inserting an "artificial" loop exit to a new dead-end block with an `unreachable`.
It inserts a `cond_br` with a `builtin "infinite_loop_true_condition"`:
```
bb0:
br bb1
bb1:
br bb1 // back-end branch
```
->
```
bb0:
br bb1
bb1:
%1 = builtin "infinite_loop_true_condition"() // always true, but the compiler doesn't know
cond_br %1, bb2, bb3
bb2: // new back-end block
br bb1
bb3: // new dead-end block
unreachable
```
Introduce a new optional inferred-immutable flag on SILFunctionArgument to mark
closure-captured box parameters that are never written to despite being mutable.
This flag will enable in future commits:
- Marking captured mutable boxes as immutable when interprocedural analysis
proves they are never modified
- Treating these captures as Sendable when they contain Sendable types
- Improving region-based isolation analysis for concurrent code
This complements the inferred-immutable flag on alloc_box by allowing
immutability information to flow through closure boundaries.
To help reduce cognitive burden for future Swift compiler engineers,
let's use the same terminology for coroutine accessors in SIL dumps
as we use in the surface language and inside the compiler.
This really just changes two lines in SILPrinter.cpp and updates
a lot of tests. I've also copied one test to preserve the old syntax
to make sure that SIL parsing still accepts it. That should hopefully
prevent unfortunate round-tripping issues while these changes settle.
This does not rename all the internal variables, functions, and types
whose names were based on the old syntax.
I think it adds new syntax support everywhere it's needed while
retaining enough of the old syntax support that early adopters will
see nice deprecation messages guiding them to the new syntax.
Removes the underscored prefixes from the @_section and @_used attributes, making them public as @section and @used respectively. The SymbolLinkageMarkers experimental feature has been removed as these attributes are now part of the standard language. Implemented expression syntactic checking rules per SE-0492.
Major parts:
- Renamed @_section to @section and @_used to @used
- Removed the SymbolLinkageMarkers experimental feature
- Added parsing support for the old underscored names with deprecation warnings
- Updated all tests and examples to use the new attribute names
- Added syntactic validation for @section to align with SE-0492 (reusing the legality checker by @artemcm)
- Changed @DebugDescription macro to explicitly use a tuple type instead of type inferring it, to comply with the expression syntax rules
- Added a testcase for the various allowed and disallowed syntactic forms, `test/ConstValues/SectionSyntactic.swift`.
[concurrency] Change #isolated to mask out the TBI bits of the witness pointer of the implicit isolated any Actor pointer so we can do optimizations on TBI supporting platforms in the future.
This instruction converts Builtin.ImplicitActor to Optional<any Actor>. In the
process of doing so, it masks out the bits we may have stolen from the witness
table pointer of Builtin.ImplicitActor. The bits that we mask out are the bottom
two bits of the top nibble of the TBI space on platforms that support TBI (that
is bit 60,61 on arm64). On platforms that do not support TBI, we just use the
bottom two tagged pointer bits (0,1).
By using an instruction, we avoid having to represent the bitmasking that we are
performing at the SIL level and can instead just make the emission of the
bitmasking an IRGen detail. It also allows us to move detection if we are
compiling for AArch64 to be an IRGen flag instead of a LangOpts flag.
The instruction is a guaranteed forwarding instruction since we want to treat
its result as a borrowed projection from the Builtin.ImplicitActor.
`@_extern(c)` is meant for referencing C functions defined outside of
this Swift file. Instead of using the C function name as the SIL
function name, which is prone to collisions across different Swift
modules, place make the C function name the "asmname" of the
corresponding SIL function. Show that this prevents deserialization
errors when there are conflicting Swift-level types for the same
`@_extern(c)`-named symbol across modules.
Part of rdar://137014448.
Instead of using the C name as the mangled name of a SIL function
The asmname attribute allows one to specify the name that will be used
when lowering a given SIL declaration to LLVM IR. It is not currently
exposed in the surface language.
Make sure this attribute round-trips through the parser and
serialization.
Part of rdar://137014448O.
Store specialize witness tables in a separate lookup table in the module. This allows that for a normal conformance there can exist the original _and_ a specialized witness table.
Also, add a boolean property `isSpecialized` to `WitnessTable` which indicates whether the witness table is specialized or not.
This is used for synthetic uses like _ = x that do not act as a true use but
instead only suppress unused variable warnings. This patch just adds the
instruction.
Eventually, we can use it to move the unused variable warning from Sema to SIL
slimmming the type checker down a little bit... but for now I am using it so
that other diagnostic passes can have a SIL instruction (with SIL location) so
that we can emit diagnostics on code like _ = x. Today we just do not emit
anything at all for that case so a diagnostic SIL pass would not see any
instruction that it could emit a diagnostic upon. In the next patch of this
series, I am going to add SILGen support to do that.
Type annotations for instruction operands are omitted, e.g.
```
%3 = struct $S(%1, %2)
```
Operand types are redundant anyway and were only used for sanity checking in the SIL parser.
But: operand types _are_ printed if the definition of the operand value was not printed yet.
This happens:
* if the block with the definition appears after the block where the operand's instruction is located
* if a block or instruction is printed in isolation, e.g. in a debugger
The old behavior can be restored with `-Xllvm -sil-print-types`.
This option is added to many existing test files which check for operand types in their check-lines.
Find all the usages of `--enable-experimental-feature` or
`--enable-upcoming-feature` in the tests and replace some of the
`REQUIRES: asserts` to use `REQUIRES: swift-feature-Foo` instead, which
should correctly apply to depending on the asserts/noasserts mode of the
toolchain for each feature.
Remove some comments that talked about enabling asserts since they don't
apply anymore (but I might had miss some).
All this was done with an automated script, so some formatting weirdness
might happen, but I hope I fixed most of those.
There might be some tests that were `REQUIRES: asserts` that might run
in `noasserts` toolchains now. This will normally be because their
feature went from experimental to upcoming/base and the tests were not
updated.
I am adding this instruction to express artificially that two non-Sendable
values should be part of the same region. It is meant to be used in cases where
due to unsafe code using Sendable, we stop propagating a non-Sendable dependency
that needs to be made in the same region of a use of said Sendable value. I
included an example in ./docs/SIL.rst of where this comes up with @out results
of continuations.
When its operand has coroutine kind `yield_once_2`, a `begin_apply`
instruction produces an additional value representing the storage
allocated by the callee. This storage must be deallocated by a
`dealloc_stack` on every path out of the function. Like any other stack
allocation, it must obey stack discipline.
For now this will only be used for HopToMainActorIfNeeded thunks. I am creating
this now since in the past there has only been one option for creating
thunks... to create the thunk in SILGen using SILGenThunk. This code is hard to
test and there is a lot of it. By using an instruction here we get a few benefits:
1. We decouple SILGen from needing to generate new kinds of thunks. This means
that SILGenThunk does not need to expand to handle more thunks.
2. All thunks implemented via ThunkInst will be easy to test in a decoupled way
with SIL tests.
3. Even though this stabilizes the patient, we still have many thunks in SILGen
and various parts of the compiler. Over time, we can swap to this model,
allowing us to hopefully eventually delete SILGenThunk.
The Apple SDKs have been providing the Darwin overlay since macOS 10.14.4, iOS 12.2, et al. More recently the SDK version has diverged from the Swift version making them incompatible. Stop building the overlay from Swift. Once the SDK overlays aren't being built, the clang overlays need to be built in testing.
rdar://115192929
The Apple SDKs have been providing the Darwin overlay since macOS 10.14.4, iOS 12.2, et al. More recently the SDK version has diverged from the Swift version making them incompatible. Stop building the overlay from Swift. Once the SDK overlays aren't being built, the clang overlays need to be built in testing.
%target-swift-emit-pcm doesn't use the sdk, but %target-swift-frontend does, which will cause them to have a mismatch with "builtin headers belong to system modules, and _Builtin_ modules are ignored for cstdlib headers" aka LANGOPT(BuiltinHeadersInSystemModules) aka -fbuiltin-headers-in-system-modules.
rdar://115192929
If there is no read from an indirect argument, this argument has to be dropped.
At the call site the store to the argument's memory location could have been removed (based on the callee's memory effects).
Therefore, converting such an unused indirect argument to a direct argument, would load an uninitialized value at the call site.
This would lead to verifier errors and in worst case to a miscompile because IRGen can implicitly use dead arguments, e.g. for getting the type of a class reference.
Instead of adding a "flag" (`m` in `...Tgm5`) make it more generic to allow to drop any unused argument.
Add all dropped arguments with a `t<n-1>` (where `<n-1>` is empty for n === 0). For example `...Ttt2g5`.
Out of an abundance of caution, we:
1. Left in parsing support for transferring but internally made it rely on the
internals of sending.
2. Added a warning to tell people that transferring was going to
be removed very soon.
Now that we have given people some time, remove support for parsing
transferring.
rdar://130253724
