The new flag will be used to track whether a borrow scope corresponds to
a source-level lexical scope. Here, the flag is just documented, added
to the instruction, represented in textual and serialized SIL, and
cloned.
Add OwnershipForwardingTermInst::createResult(SILBasicBlock, SILType)
Add SwitchEnumInst::createDefaultResult()
Add SwitchEnumInst::createOptionalSomeResult(), which handles most
compiler-generated switches.
Basic API for creating terminator results with consistent
ownership. This allows enabling OSSA verification on terminator
results. It fixes current issues, but is also a prerequisite for OSSA
simplify-cfg.
For switch_enum, this ensures that the default argument consistently
either forwards the original value, or handles the payload of the
unique case (the unique payload was already being inferred for
ownership, but the block argument was inconsistent with that fact).
switch_enum and checked_cast_br specify their forwarding
ownership. This can differ from their operand ownership.
For example:
%e = enum $Optional<AnyObject>, #Optional.none!enumelt
switch_enum %e : $Optional<AnyObject>,
case #Optional.some!enumelt: bb2...
bb2(%arg : @owned T):
Independent forwarding ownership is only supported with terminators in this
change, but in the near term it will be used for all forwarding
operations to support implicit borrow scopes.
Later stages use the name to disambiguate variables and this amgiguity
can lead to incorrect debug info that crashes LLVM. This also makes
the artificial variable names visible in textual SIL output.
rdar://82313550
This patch replace all in-memory objects of DebugValueAddrInst with
DebugValueInst + op_deref, and duplicates logics that handles
DebugValueAddrInst with the latter. All related check in the tests
have been updated as well.
Note that this patch neither remove the DebugValueAddrInst class nor
remove `debug_value_addr` syntax in the test inputs.
SROA and Mem2Reg now can leverage DIExpression -- op_fragment, more
specifically -- to generate correct debug info for optimized SIL. Some
important highlights:
- The new swift::salvageDebugInfo, similar to llvm::salvageDebugInfo,
tries to restore / transfer debug info from a deleted instruction.
Currently I only implemented this for store instruction whose
destination is an alloc_stack value.
- Since we now have source-variable-specific SIL location inside a
`debug_value` instruction (and its friends), this patch teaches
SILCloner and SILInliner to remap the debug scope there in addition
to debug scope of the instruction.
- DCE now does not remove `debug_value` instruction whose associating
with a function argument SSA value that is not used elsewhere. Since
that SSA value will not disappear so we should keep the debug info.
Debug variables that are marked 'implicit' on its `debug_value`
instruction mean that they were generated by compiler. Optimizers are
free to remove them (if it becomes a dead code, for instance) even in
-Onone. Since they are barely used by users and keeping them might lead
to incorrect IRGen results.
Previously, AbstractionPattern::getOpaque() was used for async
continuations. That was problematic for functions like
```objc
- (void)performVoid2VoidWithCompletion:(void (^ _Nonnull)(void (^ _Nonnull)(void)))completion;
```
whose completion takes a closure. Doing so resulted in attempting to
build a block to func thunk where one of the functions had an out
parameter.
Instead, use the AbstractionPattern(ty).
rdar://79383990
Currently the debug info infrastructure inside SIL can only associate a
source variable with a single (simple) SSA value. Which is insufficient
to preserve (correct) debug info across SIL-level optimizations -- for
example, SROA that decompose or even eliminate aggregate-type obejcts.
By adding DIExpression into SIL, we are able to reconstruct the
connection between a source variable and its SSA value counterpart, even
across optimizations. This patch adds such support into in-memory
representation for SIL instructions and the SILParser/Printer. The
following patch will add changes for the IRGen part.
In theory we could map opened archetypes per module because opened archetypes _should_ be unique across the module.
But currently in some rare cases SILGen re-uses the same opened archetype in multiple functions.
The fix is to add the SILFunction to the map's key.
That also requires that we update the map whenever instructions are moved from one function to another.
This fixes a compiler crash.
rdar://76916931
Instead, put the archetype->instrution map into SIlModule.
SILOpenedArchetypesTracker tried to maintain and reconstruct the mapping locally, e.g. during a use of SILBuilder.
Having a "global" map in SILModule makes the whole logic _much_ simpler.
I'm wondering why we didn't do this in the first place.
This requires that opened archetypes must be unique in a module - which makes sense. This was the case anyway, except for keypath accessors (which I fixed in the previous commit) and in some sil test files.
If the '[poison]' flag is set, then all references within this debug
value will be overwritten with a sentinel at this point in the
program. This is used in debug builds when shortening non-trivial
value lifetimes to ensure the debugger cannot inspect invalid
memory. `debug_value` instructions with the poison flag are not
generated until OSSA islowered. They are not expected to be serialized
within the module, and the pipeline is not expected to do any
significant code motion after lowering.
Refactor SILGen's ApplyOptions into an OptionSet, add a
DoesNotAwait flag to go with DoesNotThrow, and sink it
all down into SILInstruction.h.
Then, replace the isNonThrowing() flag in ApplyInst and
BeginApplyInst with getApplyOptions(), and plumb it
through to TryApplyInst as well.
Set the flag when SILGen emits a sync call to a reasync
function.
When set, this disables the SIL verifier check against
calling async functions from sync functions.
Finally, this allows us to add end-to-end tests for
rdar://problem/71098795.
* Refactoring: replace "Destination" and the ownership qualifier by a single "Mode". This represents much better the mode how the instruction is to be lowered. NFC
* Make assign_by_wrapper printable and parseable.
* Fix lowering of the assign modes for indirect results of the init-closure: The indirect result was initialized and not assigned to. The fix is to insert a destroy_addr before calling the init closure. This fixes a memory lifetime error and/or a memory leak. Found by inspection.
* Fix an iterator-invalidation crash in RawSILInstLowering
* Add tests for lowering assign_by_wrapper.
cloning
forwardingOwnershipKind can differ from the operand's ownershipKind. We
need to copy forwardingOwnershipKind while cloning these instructions.
Also print the forwarding ownership kind when it differs from its
operand's ownershipKind
This is a follow up of #36063
The forwardingOwnershipKind need not be the same as operandOwnershipKind
after optimizations like SILCombine. While cloning, make sure to
propagate this correctly, if not this results in unnecessary ownership
verifier errors.
Compiler:
- Add `Forward` and `Reverse` to `DifferentiabilityKind`.
- Expand `DifferentiabilityMask` in `ExtInfo` to 3 bits so that it now holds all 4 cases of `DifferentiabilityKind`.
- Parse `@differentiable(reverse)` and `@differentiable(_forward)` declaration attributes and type attributes.
- Emit a warning for `@differentiable` without `reverse`.
- Emit an error for `@differentiable(_forward)`.
- Rename `@differentiable(linear)` to `@differentiable(_linear)`.
- Make `@differentiable(reverse)` type lowering go through today's `@differentiable` code path. We will specialize it to reverse-mode in a follow-up patch.
ABI:
- Add `Forward` and `Reverse` to `FunctionMetadataDifferentiabilityKind`.
- Extend `TargetFunctionTypeFlags` by 1 bit to store the highest bit of differentiability kind (linear). Note that there is a 2-bit gap in `DifferentiabilityMask` which is reserved for `AsyncMask` and `ConcurrentMask`; `AsyncMask` is ABI-stable so we cannot change that.
_Differentiation module:
- Replace all occurrences of `@differentiable` with `@differentiable(reverse)`.
- Delete `_transpose(of:)`.
Resolves rdar://69980056.
This removes the ambiguity when casting from a SingleValueInstruction to SILNode, which makes the code simpler. E.g. the "isRepresentativeSILNode" logic is not needed anymore.
Also, it reduces the size of the most used instruction class - SingleValueInstruction - by one pointer.
Conceptually, SILInstruction is still a SILNode. But implementation-wise SILNode is not a base class of SILInstruction anymore.
Only the two sub-classes of SILInstruction - SingleValueInstruction and NonSingleValueInstruction - inherit from SILNode. SingleValueInstruction's SILNode is embedded into a ValueBase and its relative offset in the class is the same as in NonSingleValueInstruction (see SILNodeOffsetChecker).
This makes it possible to cast from a SILInstruction to a SILNode without knowing which SILInstruction sub-class it is.
Casting to SILNode cannot be done implicitly, but only with an LLVM `cast` or with SILInstruction::asSILNode(). But this is a rare case anyway.
This removes the ambiguity when casting from a SingleValueInstruction to SILNode, which makes the code simpler. E.g. the "isRepresentativeSILNode" logic is not needed anymore.
Also, it reduces the size of the most used instruction class - SingleValueInstruction - by one pointer.
Conceptually, SILInstruction is still a SILNode. But implementation-wise SILNode is not a base class of SILInstruction anymore.
Only the two sub-classes of SILInstruction - SingleValueInstruction and NonSingleValueInstruction - inherit from SILNode. SingleValueInstruction's SILNode is embedded into a ValueBase and its relative offset in the class is the same as in NonSingleValueInstruction (see SILNodeOffsetChecker).
This makes it possible to cast from a SILInstruction to a SILNode without knowing which SILInstruction sub-class it is.
Casting to SILNode cannot be done implicitly, but only with an LLVM `cast` or with SILInstruction::asSILNode(). But this is a rare case anyway.
`differentiability_function_extract` instruction has an optional explicit
extractee type. This is currently used by TypeSubstCloner and the
LoadableByAddress transform to rewrite `differentiability_function_extract`
instructions while preserving `@differentiable` function type invariants.
There is an assertion that `differentiability_function_extract` instructions do
not have explicit extractee types outside of canonical/lowered SIL. However,
this does not handle the SIL deserialization case above: when a function
containing a `differentiable_function_extract` instruction with an explicit type
is deserialized into a raw SIL module (which happens when optimizations are
enabled).
Removing the assertion unblocks this encountered use case.
A more robust longer-term solution may be to change SIL `@differentiable`
function types to explicitly store component original/JVP/VJP function types.
Also fix `differentiable_function_extract` extractee type serialization.
Resolves SR-14004.
The begin_apply token represents the borrow scope of all owned and guaranteed
call arguments. Although SILToken is (currently) trivially typed, it must
have guaranteed ownership so end_apply and abort_apply will be recognized
as lifetime-ending uses.
This commit is doing a few things:
1. It is centralizing all decisions about whether an operand's owner instruction
or a value's parent instruction is forwarding in each SILInstruction
itself. This will prevent this information from getting out of sync.
2. This allowed me to hide the low level queries in OwnershipUtils.h that
determined if a SILNodeKind was "forwarding". I tried to minimize the amount of
churn in this PR and thus didn't remove the
is{Owned,Ownership,Guaranteed}Forwarding{Use,Value} checks. Instead I left them
alone but added in asserts to make sure that if the old impl ever returns true,
the neew impl does as well. In a subsequent commit, I am going to remove the old
impl in favor of isa queries.
3. I also in the process discovered that there were some instructions that were
being inconsistently marked as forwarding. All of the asserts in the PR caught
these and I fixed these inconsistencies.
This makes it easier to understand conceptually why a ValueOwnershipKind with
Any ownership is invalid and also allowed me to explicitly document the lattice
that relates ownership constraints/value ownership kinds.
This allows us to hoist the error case of having a function signature with
conflicting ownership requirements into the creation of the return inst instead
of at the time of computing Operand Constraints.
This is the last part of the Operand Constraint computation that can fail that
once removed will let me use fail to mean any constriant is allowed.
Previously, we always inferred the ownership of the switch_enum from its phi
operands. This forced us to need to model a failure to find a good
OperandOwnershipKindMap in OperandOwnership.cpp. We want to eliminate such
conditions so that we can use failing to find a constraint to mean that a value
can accept any value rather than showing a failure.
Compute 'isLet' from the VarDecl that is available when constructing
AccessedStorage so we don't need to recover the VarDecl for the base
later.
This generally makes more sense and is more efficient, but it will be
necessary when we look past class casts when finding the reference root.
`get_async_continuation[_addr]` begins a suspend operation by accessing the continuation value that can resume
the task, which can then be used in a callback or event handler before executing `await_async_continuation` to
suspend the task.
I don't have a test case for this bug based on the current code. But
the fix is clearly needed to have a unique AccessStorage object for
each property. The AccessPath commits will contain test cases for this
functionality.
Today unchecked_bitwise_cast returns a value with ObjCUnowned ownership. This is
important to do since the instruction can truncate memory meaning we want to
treat it as a new object that must be copied before use.
This means that in OSSA we do not have a purely ossa forwarding unchecked
layout-compatible assuming cast. This role is filled by unchecked_value_cast.
`DifferentiableFunctionInst` now stores result indices.
`SILAutoDiffIndices` now stores result indices instead of a source index.
`@differentiable` SIL function types may now have multiple differentiability
result indices and `@noDerivative` resutls.
`@differentiable` AST function types do not have `@noDerivative` results (yet),
so this functionality is not exposed to users.
Resolves TF-689 and TF-1256.
Infrastructural support for TF-983: supporting differentiation of `apply`
instructions with multiple active semantic results.
* a new [immutable] attribute on ref_element_addr and ref_tail_addr
* new instructions: begin_cow_mutation and end_cow_mutation
These new instructions are intended to be used for the stdlib's COW containers, e.g. Array.
They allow more aggressive optimizations, especially for Array.
This became necessary after recent function type changes that keep
substituted generic function types abstract even after substitution to
correctly handle automatic opaque result type substitution.
Instead of performing the opaque result type substitution as part of
substituting the generic args the underlying type will now be reified as
part of looking at the parameter/return types which happens as part of
the function convention apis.
rdar://62560867
