If a constrained extension has fewer conformance requirements
than the nominal type declaration, because some of the type
parameters of the nominal type are fixed to concrete types by
the extension, we would run into trouble because interface
type substitution does not correctly handle this case.
Applying an identity substitution map to an interface type
does not look up concrete types in the output generic
signature, so we get back a type parameter that is not valid.
getReducedType() has a hack to deal with this. I'd like to
get rid of the hack and fix interface type substitution to
do this correctly, but until then, this will do.
Fixes https://github.com/swiftlang/swift/issues/76479
A change to the way we determined whether a protocol conformance is
"dependent" for marker protocols caused an ABI break for
Sendable-refining protocols built with pre-6.0 Swift compilers. The
fix for this issue (https://github.com/swiftlang/swift/pull/75769)
gated the change on deployment target.
The deployment target change fixed the original problem, then caused a
related issue when a project mixes deployment targets (pre-6.0 and
6.0+) with non-resilient protocols. Exempt non-resilient protocols from
this change so we get consistent behavior.
Fixes rdar://134953989.
Some requirement machine work
Rename requirement to Value
Rename more things to Value
Fix integer checking for requirement
some docs and parser changes
Minor fixes
Within Swift 6.0, we expanded an optimization for witness tables that
that allowed direct access to the witness table for conformances to
any protocol that can never have a witness table, rather than requiring
access through `swift_getWitnessTable` that might need to instantiate
the witness table.
The previous optimization only covered Objective-C protocols, but Swift
6.0 expanded that to marker protocols (such as `Sendable`) as well.
However, this constituted an API break when a Swift 6.0 compiler uses
a witness table that comes from a library built with an earlier version
of Swift, when the protocol inherits from Sendable but the conformance
to that protocol otherwise does not require an instantiation function.
In such cases, Swift 6.0 would generate code that directly accesses
the uninstantiated witness table symbol, which will have NULL entries
for any conformance in it that was considered "dependent" by the
earlier Swift compiler.
Introduce a deployment target check to guard the new optimization.
Specifically, when building for a deployment target that predates
Swift 6.0, treat conformances to marker protocols as if they might be
dependent (so the access patterns go through `swift_getWitnessTable`
for potential instantiation on older platforms). For newer deployment
targets, use the more efficent direct access pattern.
Fixes rdar://133157093.
Conflicts:
- `test/Interop/Cxx/class/method/methods-this-and-indirect-return-irgen-itanium.swift`
previously fixed on rebranch, now fixed on main (slightly differently).
This corresponds to the parameter-passing convention of the Itanium C++
ABI, in which the argument is passed indirectly and possibly modified,
but not destroyed, by the callee.
@in_cxx is handled the same way as @in in callers and @in_guaranteed in
callees. OwnershipModelEliminator emits the call to destroy_addr that is
needed to destroy the argument in the caller.
rdar://122707697
For new runtimes, this is redundant with the invertible requirement encoding, and for
old runtimes, this breaks dynamic conformance checking because Copyable and Escapable
aren't real protocols on those older runtimes. Fixes rdar://129857284.
Although I don't plan to bring over new assertions wholesale
into the current qualification branch, it's entirely possible
that various minor changes in main will use the new assertions;
having this basic support in the release branch will simplify that.
(This is why I'm adding the includes as a separate pass from
rewriting the individual assertions)
Introduce metadata and runtime support for describing conformances to
"suppressible" protocols such as `Copyable`. The metadata changes occur
in several different places:
* Context descriptors gain a flag bit to indicate when the type itself has
suppressed one or more suppressible protocols (e.g., it is `~Copyable`).
When the bit is set, the context will have a trailing
`SuppressibleProtocolSet`, a 16-bit bitfield that records one bit for
each suppressed protocol. Types with no suppressed conformances will
leave the bit unset (so the metadata is unchanged), and older runtimes
don't look at the bit, so they will ignore the extra data.
* Generic context descriptors gain a flag bit to indicate when the type
has conditional conformances to suppressible protocols. When set,
there will be trailing metadata containing another
`SuppressibleProtocolSet` (a subset of the one in the main context
descriptor) indicating which suppressible protocols have conditional
conformances, followed by the actual lists of generic requirements
for each of the conditional conformances. Again, if there are no
conditional conformances to suppressible protocols, the bit won't be
set. Old runtimes ignore the bit and any trailing metadata.
* Generic requirements get a new "kind", which provides an ignored
protocol set (another `SuppressibleProtocolSet`) stating which
suppressible protocols should *not* be checked for the subject type
of the generic requirement. For example, this encodes a requirement
like `T: ~Copyable`. These generic requirements can occur anywhere
that there is a generic requirement list, e.g., conditional
conformances and extended existentials. Older runtimes handle unknown
generic requirement kinds by stating that the requirement isn't
satisfied.
Extend the runtime to perform checking of the suppressible
conformances on generic arguments as part of checking generic
requirements. This checking follows the defaults of the language, which
is that every generic argument must conform to each of the suppressible
protocols unless there is an explicit generic requirement that states
which suppressible protocols to ignore. Thus, a generic parameter list
`<T, Y where T: ~Escapable>` will check that `T` is `Copyable` but
not that it is `Escapable`, and check that `U` is both `Copyable` and
`Escapable`. To implement this, we collect the ignored protocol sets
from these suppressed requirements while processing the generic
requirements, then check all of the generic arguments against any
conformances not suppressed.
Answering the actual question "does `X` conform to `Copyable`?" (for
any suppressible protocol) looks at the context descriptor metadata to
answer the question, e.g.,
1. If there is no "suppressed protocol set", then the type conforms.
This covers types that haven't suppressed any conformances, including
all types that predate noncopyable generics.
2. If the suppressed protocol set doesn't contain `Copyable`, then the
type conforms.
3. If the type is generic and has a conditional conformance to
`Copyable`, evaluate the generic requirements for that conditional
conformance to answer whether it conforms.
The procedure above handles the bits of a `SuppressibleProtocolSet`
opaquely, with no mapping down to specific protocols. Therefore, the
same implementation will work even with future suppressible protocols,
including back deployment.
The end result of this is that we can dynamically evaluate conditional
conformances to protocols that depend on conformances to suppressible
protocols.
Implements rdar://123466649.
We don't currently support building resilient relative protocol witness tables.
One might want to build with relative witness tables but not need
resilient protocols. Allow for that scenario.
Add a test configuration to test library-evolution + fragile resilient
protocols + relative protocol witness tables.
When IRGen is building a protocol witness thunk for a
`DistributedActorSystem.remoteCall` requirement we
need to supply witness tables associated with `Res`
generic parameter which are not expressible on the
requirement because they come from `SerializationRequirement`
associated type.
Decls with a package access level are currently set to public SIL
linkages. This limits the ability to have more fine-grained control
and optimize around resilience and serialization.
This PR introduces a separate SIL linkage and FormalLinkage for
package decls, pipes them down to IRGen, and updates linkage checks
at call sites to include package linkage.
Resolves rdar://121409846
When an actual instance of a distributed actor is on the local node, it is
has the capabilities of `Actor`. This isn't expressible directly in the type
system, because not all `DistributedActor`s are `Actor`s, nor is the
opposite true.
Instead, provide an API `DistributedActor.asLocalActor` that can only
be executed when the distributed actor is known to be local (because
this API is not itself `distributed`), and produces an existential
`any Actor` referencing that actor. The resulting existential value
carries with it a special witness table that adapts any type
conforming to the DistributedActor protocol into a type that conforms
to the Actor protocol. It is "as if" one had written something like this:
extension DistributedActor: Actor { }
which, of course, is not permitted in the language. Nonetheless, we
lovingly craft such a witness table:
* The "type" being extended is represented as an extension context,
rather than as a type context. This hasn't been done before, all Swift
runtimes support it uniformly.
* A special witness is provided in the Distributed library to implement
the `Actor.unownedExecutor` operation. This witness back-deploys to the
Swift version were distributed actors were introduced (5.7). On Swift
5.9 runtimes (and newer), it will use
`DistributedActor.unownedExecutor` to support custom executors.
* The conformance of `Self: DistributedActor` is represented as a
conditional requirement, which gets satisfied by the witness table
that makes the type a `DistributedActor`. This makes the special
witness work.
* The witness table is *not* visible via any of the normal runtime
lookup tables, because doing so would allow any
`DistributedActor`-conforming type to conform to `Actor`, which would
break the safety model.
* The witness table is emitted on demand in any client that needs it.
In back-deployment configurations, there may be several witness tables
for the same concrete distributed actor conforming to `Actor`.
However, this duplication can only be observed under fairly extreme
circumstances (where one is opening the returned existential and
instantiating generic types with the distributed actor type as an
`Actor`, then performing dynamic type equivalence checks), and will
not be present with a new Swift runtime.
All of these tricks together mean that we need no runtime changes, and
`asLocalActor` back-deploys as far as distributed actors, allowing it's
use in `#isolation` and the async for...in loop.
KeyPath's getter/setter/hash/equals functions have their own calling
convention, which receives generic arguments and embedded indices from a
given KeyPath argument buffer.
The convention was previously implemented by:
1. Accepting an argument buffer as an UnsafeRawPointer and casting it to
indices tuple pointer in SIL.
2. Bind generic arguments info from the given argument buffer while emitting
prologue in IRGen by creating a new forwarding thunk.
This 2-phase lowering approach was not ideal, as it blocked KeyPath
projection optimization [^1], and also required having a target arch
specific signature lowering logic in SIL-level [^2].
This patch centralizes the KeyPath accessor calling convention logic to
IRGen, by introducing `@convention(keypath_accessor_XXX)` convention in
SIL and lowering it in IRGen. This change unblocks the KeyPath projection
optimization while capturing subscript indices, and also makes it easier
to support WebAssembly target.
[^1]: https://github.com/apple/swift/pull/28799
[^2]: https://forums.swift.org/t/wasm-support/16087/21
