By default avoid imploding params that have parameter
flags, but carve out exceptions for ownership flags,
which can be thunked, and `@_nonEphemeral` which can
be freely dropped without issue.
Previously bindings were inferred only during solving but now they
are inferred as soon as something changes in the constraint graph,
so the hack that dropped `noEscape` bit from function type when
inferred for generic parameter should be allowed during constraint
generation as well.
When there is a conversion from e.g. `(A) -> Void` to `(B) -> Void`
matching between `A` and `B` is going to have a special locator which
doesn't end in `TupleElement`, so `repairFailures` has to account
for that and fix it just like regular argument mismatch.
Resolves: rdar://problem/59066040
Since `binding` has all of the required information now it's possible
to use its `locator` as a source of type variable assignment
(`Bind` constraint) in `TypeVariableBinding::attempt` which helps
to improve diagnostics.
Given we can now find overloads for applies of optional functions,
adjust the logic so we look at the call's direct callee. In addition,
tweak the logic so we don't assert on a ForceTryExpr.
If the only difference between two functions is `throws` and it
is not a subtype relationship, let's repair the problem by dropping
`throws` attribute and letting solver continue to search for
a solution, which would later be diagnosed.
Previously we returned a subscript member locator for an apply of a
subscript expr, which is incorrect because the callee is the function
returned from the subscript rather than the subscript itself.
This commit adds `ConstraintSystem::getCalleeLocator`, which forms a
locator that describes the callee of a given expression. This function
is then used to replace various places where this logic is duplicated.
This commit also changes the conditions under which a ConstructorMember
callee locator is formed. Previously it was formed for a CallExpr with a
TypeExpr function expr. However, now such a locator is formed if the
function expr is of AnyMetatypeType. This allows it to be more lenient
with invalid code, as well as work with DotSelfExpr.
Resolves SR-10694.
Detect difference in escapiness while matching function types
in the solver and record a fix that suggests to add @escaping
attribute where appropriate.
Also emit a tailored diagnostic when non-escaping parameter
type is used as a type of a generic parameter.
Allow certain bindings and conversions involving non-escaping
function types to succeed in "diagnostic" mode to gather fixes
and diagnose such problems better, expecially related to
conversions to 'Any' and generic parameters.
Resolves: rdar://problem/38648760
Change the fix-it to move the argument to its correct location in one go. This happens by removing it from one location and inserting it in the other (as opposed to the original implementation which swapped one argument with the preceding one). The commas separating the arguments are adjusted to match the moved argument.
Add new tests for reordering regular arguments, variadic arguments, and function arguments.
Resolves: SR-4715 rdar://problem/31849281
This makes it a lot easier to diagnose contextual mismatch related
to arguments used by the call without relying on the type of the
function expression which is not always available.
This gives us much better diagnostics around things like
escaping-mismatched function parameters which would previously skip
this and produce bogus invalid conversion errors between “identical”
types.
Migrate the check for whether a given type is representable in
Objective-C, which is currently used to verify when @objc can be
inferred or verify that an explicitly-written @objc is well-formed,
from Sema into a set of queries on the Type within the AST library, so
it can be used in other parts of the compiler.
As part of this refactoring, clean up and improve a number of aspects
of this code:
* Unify the "trivially representable" and "representable" code paths
into a single code path that covers these cases. Clarify the
different levels of "representable" we have in both the code and
in comments.
* Distinguish between representation in C vs. representation in
Objective-C. While we aren't using this now, I'm anticipating it
being useful to allow exporting C interfaces via @_cdecl (or
similar).
* Eliminate the special cases for bridging String/Array/Dictionary/Set
with their Foundation counterparts; we now consult
_ObjectiveCBridgeable conformances exclusively to get this
information.
* Cache foreign-representation information on the ASTContext in a
manner that will let us more easily get the right answer across
different contexts while providing more sharing than the TypeChecker
version.
Annoyingly, this only seemed to fix a small class of error where we
were permitting Unsafe(Mutable)Pointer<T> to be representable in
Objective-C when T was representable but not trivially representable,
e.g., T=String or T=AnyObject.Type.
When comparing two functions for overload resolution, break apart the
parameter lists to compare individual parameters rather than comparing
the tuples. This allows us to prefer functions with fewer arguments to
ones with more, defaulted or variadic arguments. That preference was
already encoded in the constraint optimizer, which led to some strange
behavior where the preference was expressed for function calls but not
for calls to initializers. Fixes rdar://problem/24128153.
The standard library change tweaks the anachronistic, unavailable
"print" variants somewhat. The only behavior change here is a slight
regression for cases like:
print(a: 1, b: 2)
where we used to produce a diagnostic:
Please wrap your tuple argument in parentheses: 'print((...))'
but we now get:
argument labels '(a:, b:)' do not match any available overloads
However, this regression will happen at some point *anyway*, if
SE-0029 (or anything else that removes the implicit tuple splat
operation) goes through.
and probably others.
When we're type-checking a failed ApplyExpr that has an overload set that
prevents getting a specific type to feed into the initial typechecking of
the argument list, ranking can often narrow down the list of candidates
further, to the point where there is only one candidate left or where all
candidates agree that one argument is wrong.
In this case, re-type-check the subexpr with the expected type. In the case of
rdar://problem/22243469 we now produce:
t.swift:6:11: error: invalid conversion from throwing function of type '() throws -> ()' to non-throwing function type '() -> Void'
process {
^
instead of:
t.swift:6:3: error: cannot invoke 'process' with an argument list of type '(() throws -> ())'
process {
^
t.swift:6:3: note: overloads for 'process' exist with these partially matching parameter lists: (UInt, fn: () -> Void)
process {
^
Which is a heck of a lot less specific. Similarly, in the testcase from rdar://23550816, instead
of producing:
takeTwoFuncsWithDefaults { $0 + 1 }
error: cannot invoke 'takeTwoFuncsWithDefaults' with an argument list of type '((Int -> Int)?)'
note: expected an argument list of type '(f1: (Int -> Int)?, f2: (String -> String)?)'
we now produce:
error: cannot convert value of type '_ -> Int' to expected argument type '(String -> String)?'
which is a lot closer to what we want to complain about.
notion of a "near miss" for an argument type mismatch. This allows us to prune
the candidate set down in some cases. For example, in the testcase in
rdar://22243469 we are able to go from:
t.swift:6:3: error: cannot invoke 'process' with an argument list of type '(() throws -> ())'
process {
^
t.swift:6:3: note: overloads for 'process' exist with these partially matching parameter lists: (UInt, fn: () -> Void), (UInt)
down to:
t.swift:6:3: note: expected an argument list of type '(UInt, () -> Void)'
This paves the way for producing a better error in cases like this, but there are
other bits of weirdness that need to be untangled first.
- Enhance the branch new argument label overload diagnostic to just
print the argument labels that are the problem, instead of printing
the types inferred at the argument context. This can lead to confusion
particularly when an argument label is missing. For example before:
error: argument labels '(Int)' do not match any available overloads
note: overloads for 'TestOverloadSets.init' exist with these partially matching parameter lists: (a: Z0), (value: Int), (value: Double)
after:
error: argument labels '(_:)' do not match any available overloads
note: overloads for 'TestOverloadSets.init' exist with these partially matching parameter lists: (a: Z0), (value: Int), (value: Double)
Second, fix <rdar://problem/22451001> QoI: incorrect diagnostic when argument to print has the wrong type
by specifically diagnosing the problem when you pass in an argument to a nullary function. Before:
error: cannot convert value of type 'Int' to expected argument type '()'
after:
error: argument passed to call that takes no arguments
print(r22451001(5))
^
Swift SVN r31795
This just deletes some code out of matchCallArguments to make sure that CSApply
and CSSimplify do the same argument matching. This code presumably
dated to a period of time when the stuff after it was just for error recovery,
but now we do argument reordering matching stuff after this point.
Swift SVN r28670
Most tests were using %swift or similar substitutions, which did not
include the target triple and SDK. The driver was defaulting to the
host OS. Thus, we could not run the tests when the standard library was
not built for OS X.
Swift SVN r24504
