Type annotations for instruction operands are omitted, e.g.
```
%3 = struct $S(%1, %2)
```
Operand types are redundant anyway and were only used for sanity checking in the SIL parser.
But: operand types _are_ printed if the definition of the operand value was not printed yet.
This happens:
* if the block with the definition appears after the block where the operand's instruction is located
* if a block or instruction is printed in isolation, e.g. in a debugger
The old behavior can be restored with `-Xllvm -sil-print-types`.
This option is added to many existing test files which check for operand types in their check-lines.
Previously we gave them the same SIL linkage as the method, then changed
the LLVM IR linkage to 'internal' (which is roughly equivalent to
SIL 'private') in IRGen.
This would crash in the SIL verifier if an @objc method was
'@_alwaysEmitIntoClient'. While such a combination of attributes is
silly since '@objc' methods are intrinsically part of the ABI, we
should not crash in this case.
The simplest fix is to just set the linkage to private at the SIL
level, avoiding the IRGen hack entirely.
The main point of this change is to make sure that a shared function always has a body: both, in the optimizer pipeline and in the swiftmodule file.
This is important because the compiler always needs to emit code for a shared function. Shared functions cannot be referenced from outside the module.
In several corner cases we missed to maintain this invariant which resulted in unresolved-symbol linker errors.
As side-effect of this change we can drop the shared_external SIL linkage and the IsSerializable flag, which simplifies the serialization and linkage concept.
This reverts commit a3b68e6df5.
Speculative revert because I believe it is the cause of the failures on
the swift-master-source-compat-suite-enable-verify-exclusivity bot.
rdar://58529726
This indicates that the "self" argument to the current function is always dynamically of the exact
static base class type, allowing metadata accesses in IRGen to use the local self metadata to answer
metadata requests for the class type. Set this attribute on allocating entry points of designated
inits, which is one of the most common places where we emit redundant metadata accesses.
In a previous commit, I banned in the verifier any SILValue from producing
ValueOwnershipKind::Any in preparation for this.
This change arises out of discussions in between John, Andy, and I around
ValueOwnershipKind::Trivial. The specific realization was that this ownership
kind was an unnecessary conflation of the a type system idea (triviality) with
an ownership idea (@any, an ownership kind that is compatible with any other
ownership kind at value merge points and can only create). This caused the
ownership model to have to contort to handle the non-payloaded or trivial cases
of non-trivial enums. This is unnecessary if we just eliminate the any case and
in the verifier separately verify that trivial => @any (notice that we do not
verify that @any => trivial).
NOTE: This is technically an NFC intended change since I am just replacing
Trivial with Any. That is why if you look at the tests you will see that I
actually did not need to update anything except removing some @trivial ownership
since @any ownership is represented without writing @any in the parsed sil.
rdar://46294760
This is the last part of SILGen conditionalized on EnableSILOwnership being
set. It also (as you can tell from the diff) eliminates a bunch of code from the
tests.
rdar://29791263
This does not eliminate the entrypoints on SILBuilder yet. I want to do this in
two parts so that it is functionally easier to disentangle changing the APIs
above SILBuilder and changing the underlying instruction itself.
rdar://33440767
Most of this patch is just removing special cases for materializeForSet
or other fairly mechanical replacements. Unfortunately, the rest is
still a fairly big change, and not one that can be easily split apart
because of the quite reasonable reliance on metaprogramming throughout
the compiler. And, of course, there are a bunch of test updates that
have to be sync'ed with the actual change to code-generation.
This is SR-7134.
The SILGen testsuite consists of valid Swift code covering most language
features. We use these tests to verify that no unknown nodes are in the
file's libSyntax tree. That way we will (hopefully) catch any future
changes or additions to the language which are not implemented in
libSyntax.
I am going to leave in the infrastructure around this just in case. But there is
no reason to keep this in the tests themselves. I can always just revert this
and I don't think merge conflicts are likely due to previous work I did around
the tooling for this.
Otherwise, the plus_zero_* tests will have plus_zero_* as a module name, causing
massive FileCheck problems.
The reason why I am doing it with the main tests is so that I can use it when
syncing branches/etc.
radar://34222540
Conformance manglings, which are used for witness tables and related witness
thunks, mangle the generic signature of the conformance. Since conformances
also describe the conforming type, mangle the conformances's generic signature
relative to the conforming type's generic signature.
In practice, this means that we don't mangle any part of the generic signature
into a conformance mangling now, so we see a decent win: 2.3% smaller
trie and 6.4% smaller strings section in the standard library binary.
When conditional conformances land, we'll see some generic signatures
mangling again (for the additional requirements of the constrained
extension).
The witness table had shared linkage, but we weren't serializing them,
which would cause linking errors if we emitted a reference to such a
witness table from a different module than the one where it was first
defined, as a result of deserializing and optimizing SIL.
This issue was introduced when SIL witness table serialization was
made conditional on the -sil-serialize-witness-tables flag, which is
normally only enabled for the standard library.
When the flag was added, existing tests were updated to pass the
flag, which masked the issue. Remove the flag from existing tests,
ensure that imported witness tables are still [serialized], and add
a new test specifically for the behavior enabled by this flag.
This will let me treat self during delegating initialization as an lvalue and
thus be emitted later without a scope. Thus I can simplify delegating
initialization slightly and land my argument scoping work.
rdar://33358110
- A mutating method or accessor always has 'inout self'.
- A nonmutating method or accessor never has 'inout self'.
- Only instance members can be mutating.
- Addressors are still addressors even when on static members.
Came up after reviewing another patch that confused the two as
possibly distinct concepts.
I put in a simple fixup pass (MarkUninitializedFixup) for staging purposes. I
don't expect it to be in tree long. I just did not feel comfortable fixing up in
1 commit all of the passes up to DI.
rdar://31521023
We used to give witness thunks public linkage if the
conforming type and the protocol are public.
This is completely unnecessary. If the conformance is
fragile, the thunk should be [shared] [serialized],
allowing the thunk to be serialized into callers after
devirtualization.
Otherwise for private protocols or resilient modules,
witness thunks can just always be private.
This should reduce the size of compiled binaries.
There are two other mildly interesting consequences:
1) In the bridged cast tests, we now inline the witness
thunks from the bridgeable conformances, which removes
one level of indirection.
2) This uncovered a flaw in our accessibility checking
model. Usually, we reject a witness that is less
visible than the protocol; however, we fail to
reject it in the case that it comes from an
extension.
This is because members of an extension can be
declared 'public' even if the extended type is not
public, and it appears that in this case the 'public'
keyword has no effect.
I would prefer it if a) 'public' generated a warning
here, and b) the conformance also generated a warning.
In Swift 4 mode, we could then make this kind of
sillyness into an error. But for now, live with the
broken behavior, and add a test to exercise it to ensure
we don't crash.
There are other places where this "allow public but
ignore it, kinda, except respect it in some places"
behavior causes problems. I don't know if it was intentional
or just emergent behavior from general messiness in Sema.
3) In the TBD code, there is one less 'failure' because now
that witness thunks are no longer public, TBDGen does not
need to reason about them (except for the case #2 above,
which will probably require a similar workaround in TBDGen
as what I put into SILGen).
This fixes a crash when referencing partially-applied methods
from @_inlineable functions.
Also, curry thunks for private methods do not need shared
linkage; private is sufficient.
We had some non-deterministic behavior where depending on
validation order, synthesized accessors would end up in
different places because we would sometimes just add them
at the end of the member list.
Now add the getter right after the storage, the setter
right after the getter and the materializeForSet right
after the setter.
This changes some test output where the declaration order
did not make sense before but should otherwise have no
functional effect.
