This entrypoint is similar to swift_task_isCurrentExecutor except that it
provides an ABI level option flag that enables one to configure its behavior in
a backwards deployable manner via the option flag.
I used this to expose at the ABI level the ability to check the current executor
without crashing on failure, while preserving the current behavior of
swift_task_isCurrentExecutor (which crashes on failure).
I am going to use this to implement swift_task_runOnMainActor.
`ExecutorHooks.h` is now nothing to do with hooks, so rename it. Also
there are some additional functions it should declare, and a couple of
places where we've slightly messed up the boundary, for instance
`swift_task_asyncMainDrainQueue` was defined in `Task.cpp` rather than
in the executor implementations, which is wrong, so fix that too.
`CooperativeGlobalExecutor.cpp` now builds against the interface from
`ExecutorImpl.h`, rather than including the all the concurrency headers.
rdar://135380149
C++ executor implementations were `#include`ed into `GlobalExecutor.cpp`,
which makes it difficult to replace the global executor when using the
Embedded Concurrency library. Refactor things so that they build into
separate objects, which means replacing them is just a matter of writing
the relevant functions yourself.
rdar://135380149
It cannot be used for executing general-purpose work, because such function would need to have a different signature to pass isolated actor instance.
And being explicit about using this method only for deinit allows to use object pointer for comparison with executor identity.
* [Concurrency] Fix task excutor handling of default actor isolation
The task executor API did not properly account for taking the default
actor locking into account when running code on it, we just took the job
and ran it without checking with the serial executor at all, which
resulted in potential concurrent executions inside the actor --
violating actor isolation.
Here we change the TaskExecutor enqueue API to accept the "target"
serial executor, which in practice will be either generic or a specific
default actor, and coordinate with it when we perform a
runSynchronously.
The SE proposal needs to be amended to showcase this new API, however
without this change we are introducing races so we must do this before
the API is stable.
* Remove _swift_task_enqueueOnTaskExecutor as we don't use it anymore
* no need for the new protocol requirement
* remove the enqueue(_ job: UnownedJob, isolatedTo unownedSerialExecutor: UnownedSerialExecutor)
Thankfully we dont need it after all
* Don't add swift_defaultActor_enqueue_withTaskExecutor and centralize the task executor getting to enqueue()
* move around extern definitions
which executor for which type of setting, is consolidated and we have a
single knob we use to determine when to use dispatch as our global
executor.
Radar-Id: rdar://problem/119416196
* [Executors][Distributed] custom executors for distributed actor
* harden ordering guarantees of synthesised fields
* the issue was that a non-default actor must implement the is remote check differently
* NonDefaultDistributedActor to complete support and remote flag handling
* invoke nonDefaultDistributedActorInitialize when necessary in SILGen
* refactor inline assertion into method
* cleanup
* [Executors][Distributed] Update module version for NonDefaultDistributedActor
* Minor docs cleanup
* we solved those fixme's
* add mangling test for non-def-dist-actor
This patch adds an SPI to run the first partial function of a MainActor
asynchronous function on the MainActor synchronously. This is
effectively like the asynchronous program entrypoint behavior. The first
partial function is run synchronously. Following continuations are
enqueued for execution like any other asynchronous function.
The swift_task_asyncMainDrainQueue function acts as the entrypoint into
driving the main queues, ultimately running the whole program and acting
as the backing driver of the main actor. Making the function hookable
means that custom concurrency runtimes can implement their own async
entrypoints, allowing async top-level code and async-main to "just
work".
The new intrinsic, exposed via static functions on Task<T, Never> and
Task<T, Error> (rethrowing), begins an asynchronous context within a
synchronous caller's context. This is only available for use under the
task-to-thread concurrency model, and even then only under SPI.
Defined SWIFT_STDLIB_TASK_TO_THREAD_MODEL_CONCURRENCY to describe
whether the standard library will use the task-to-thread model for
concurrency. It is true only for freestanding non-Darwin stdlibs.
When it is true, SWIFT_CONCURRENCY_TASK_TO_THREAD_MODEL is defined
during stdlib compilation of both Swift and C++ sources.
Added an option to LangOptions to specify which concurrency model is
used, either standard or task-to-thread. When
SWIFT_STDLIB_TASK_TO_THREAD_MODEL_CONCURRENCY is true, the model is
specified to be task-to-thread.
SWIFT_STDLIB_SINGLE_THREADED_RUNTIME is too much of a blunt instrument here.
It covers both the Concurrency runtime and the rest of the runtime, but we'd
like to be able to have e.g. a single-threaded Concurrency runtime while
the rest of the runtime is still thread safe (for instance).
So: rename it to SWIFT_STDLIB_SINGLE_THREADED_CONCURRENCY and make it just
control the Concurrency runtime, then add a SWIFT_STDLIB_THREADING_PACKAGE
setting at the CMake/build-script level, which defines
SWIFT_STDLIB_THREADING_xxx where xxx depends on the chosen threading package.
This is especially useful on systems where there may be a choice of threading
package that you could use.
rdar://90776105
SWIFT_STDLIB_SINGLE_THREADED_RUNTIME is too much of a blunt instrument here.
It covers both the Concurrency runtime and the rest of the runtime, but we'd
like to be able to have e.g. a single-threaded Concurrency runtime while
the rest of the runtime is still thread safe (for instance).
So: rename it to SWIFT_STDLIB_SINGLE_THREADED_CONCURRENCY and make it just
control the Concurrency runtime, then add a SWIFT_STDLIB_THREADING_PACKAGE
setting at the CMake/build-script level, which defines
SWIFT_STDLIB_THREADING_xxx where xxx depends on the chosen threading package.
This is especially useful on systems where there may be a choice of threading
package that you could use.
rdar://90776105
* [WIP] Initial draft at v2 Clock/Instant/Duration
* Ensure the literal types for _DoubleWide are able to be at least 64 bits on 32 bit platforms
* static cast timespec members to long
* Remove runtime exports from clock functions
* Export clock functions in implementations as they are in headers
* Clean up internal properties by adding leading underscores, refine availability to a TBD marker macro, and break at 80 lines to match style
* Shift operators to concrete Instant types to avoid complexity in solver resolution
* Adjust diagnostic note and error expectation of ambiguities to reflect new potential solver (perhaps incorrect) solutions
* Update stdlib/public/Concurrency/TaskSleep.swift
Co-authored-by: Karoy Lorentey <klorentey@apple.com>
* [stdlib][NFC] Remove trailing whitespace
* [stdlib] Remove _DoubleWidth from stdlib's ABI
* [stdlib] Strip downd _DoubleWidth to _[U]Int128
* Additional adjustments to diagnostic notes and errors expectation of ambiguities to reflect new potential solver (perhaps incorrect) solutions
* Disable type checker performance validation for operator overload inferences (rdar://33958047)
* Decorate Duration, DurationProtocol, Instant and clocks with @available(SwiftStdlib 9999, *)
* Restore diagnostic ambiguity test assertion (due to availability)
* Add a rough attempt at implementing time accessors on win32
* Remove unused clock id, rename SPI for swift clock ids and correct a few more missing availabilities
* remove obsolete case of realtime clock for dispatch after callout
* Use the default implementation of ~ for Int128 and UInt128
* Ensure diagnostic ambiguitiy applies evenly to all platforms and their resolved types
* Restore the simd vector build modifications (merge damage)
* Update to latest naming results for Instant.Duration
* Updates to latest proposal initializers and accessors and adjust encoding/decoding to string based serialization
* Update availability for Clock/Instant/Duration methods and types to be 5.7
* Correct *Clock.now to report via the correct runtime API
* Ensure the hashing of Duration is based upon the attoseconds hashing
* Avoid string based encoding and resort back to high and low bit encoding/decoding but as unkeyed
* Adjust naming of component initializer to use suffixes on parameters
* Duration decoding should use a mutable container for decoding
* fix up components initializer and decode access
* Add platform base initializers for timespec and tiemval to and from Duration
* Add some first draft documentation for standard library types Duration, DurationProtocol and InstantProtocol
* Another round of documentation prose and some drive-by availability fixes
* InstantProtocol availability should be 5.7
* Correct linux timeval creation to be Int and not Int32
Co-authored-by: Karoy Lorentey <klorentey@apple.com>
A task can be in one of 4 states over its lifetime:
(a) suspended
(b) enqueued
(c) running
(d) completed
This change provides priority inversion avoidance support if a task gets
escalated when it is in state (a), (c), (d).
Radar-Id: rdar://problem/76127624
This change has two parts to it:
1. Add in a new interface (addStatusRecordWithChecks) for adding task
status records that also takes in a function ref. This function ref will
be used to evaluate if current state of the parent task has any changes
that need to be propagated to the child task that has been created.
This is necessary to prevent the following race between task creation
and concurrent cancellation and escalation:
a. Parent task create child task. It does lazy relaxed loads on its own
state while doing so and propagates this state to the child.
b. Child task is created but has not been attached to the parent
task/task group.
c. Parent task gets cancelled by another thread.
d. Child task gets linked into the parent’s task status records but no
reevaluation has happened to account for changes that might have happened to
the parent after (a).
2. Move status record management functions from the
Runtime/Concurrency.h to TaskPrivate.h. Remove any corresponding
overrides that are no longer needed. Remove unused tryAddStatusRecord
method whose functionality is provided by addStatusRecordWithChecks.
Radar-Id: rdar://problem/86347801
