The order of keys in a serialized hash map is deterministic (consistent
across runs of the same compiler and same input) but not specified
(not consistent across compiler versions or modified inputs). Tweak two
tests to avoid this issue: one by sorting the output, the other by
using CHECK-DAG to ignore ordering issues.
rdar://problem/25492781&25497592
Change the optimizer to only make specializations [fragile] if both the
original callee is [fragile] *and* the caller is [fragile].
Otherwise, the specialized callee might be [fragile] even if it is never
called from a [fragile] function, which inhibits the optimizer from
devirtualizing calls inside the specialization.
This opens up some missed optimization opportunities in the performance
inliner and devirtualization, which currently reject fragile->non-fragile
references:
TEST | OLD_MIN | NEW_MIN | DELTA (%) | SPEEDUP
--- | --- | --- | --- | ---
DictionaryRemoveOfObjects | 38391 | 35859 | -6.6% | **1.07x**
Hanoi | 5853 | 5288 | -9.7% | **1.11x**
Phonebook | 18287 | 14988 | -18.0% | **1.22x**
SetExclusiveOr_OfObjects | 20001 | 15906 | -20.5% | **1.26x**
SetUnion_OfObjects | 16490 | 12370 | -25.0% | **1.33x**
Right now, passes other than performance inlining and devirtualization
of class methods are not checking invariants on [fragile] functions
at all, which was incorrect; as part of the work on building the
standard library with -enable-resilience, I added these checks, which
regressed performance with resilience disabled. This patch makes up for
these regressions.
Furthermore, once SIL type lowering is aware of resilience, this will
allow the stack promotion pass to make further optimizations after
specializing [fragile] callees.
This is only used in the verifier, to ensure that default witness
thunks are suffiently visible.
Also this patch removes the asserts enforcing that only resilient
protocols have a default witness table. This will change in an
upcoming patch, and in this patch is necessary for the test to work.
This change validates that 'undef' can appear in most places where values are
expected by the SIL parser. Fixes are also included for the 'select_value'
instruction. This resolves SR-304.
This instruction creates a "virtual" address to represent a property with a behavior that supports definite initialization. The instruction holds references to functions that perform the initialization and 'set' logic for the property. It will be DI's job to rewrite assignments into this virtual address into calls to the initializer or setter based on the initialization state of the property at the time of assignment.
Previously SILDefaultWitnessTables only included "resilient" default
implementations, which are currently defined as those that appear at the
end of a protocol, after any requirements without defaults.
However, this was too inflexible. Instead, include all entries in the
SILDefaultWitnessTable, with invalid entries standing in for requirements
without defaults.
Previously, the minimum witness table size was a separate parameter, also
appearing in SIL syntax; now it can be calculated by looking at the entries
themselves. The getResilientDefaultEntries() method of SILDefaultWitnessTable
returns the same result as getEntries() did previously.
This ireapplies commit 255c52de9f.
Original commit message:
Serialize debug scope and location info in the SIL assembler language.
At the moment it is only possible to test the effects that SIL
optimization passes have on debug information by observing the
effects of a full .swift -> LLVM IR compilation. This change enable us
to write targeted testcases for single SIL optimization passes.
The new syntax is as follows:
sil-scope-ref ::= 'scope' [0-9]+
sil-scope ::= 'sil_scope' [0-9]+ '{'
sil-loc
'parent' scope-parent
('inlined_at' sil-scope-ref )?
'}'
scope-parent ::= sil-function-name ':' sil-type
scope-parent ::= sil-scope-ref
sil-loc ::= 'loc' string-literal ':' [0-9]+ ':' [0-9]+
Each instruction may have a debug location and a SIL scope reference
at the end. Debug locations consist of a filename, a line number, and
a column number. If the debug location is omitted, it defaults to the
location in the SIL source file. SIL scopes describe the position
inside the lexical scope structure that the Swift expression a SIL
instruction was generated from had originally. SIL scopes also hold
inlining information.
<rdar://problem/22706994>
At the moment it is only possible to test the effects that SIL
optimization passes have on debug information by observing the
effects of a full .swift -> LLVM IR compilation. This change enable us
to write targeted testcases for single SIL optimization passes.
The new syntax is as follows:
sil-scope-ref ::= 'scope' [0-9]+
sil-scope ::= 'sil_scope' [0-9]+ '{'
sil-loc
'parent' scope-parent
('inlined_at' sil-scope-ref )?
'}'
scope-parent ::= sil-function-name ':' sil-type
scope-parent ::= sil-scope-ref
sil-loc ::= 'loc' string-literal ':' [0-9]+ ':' [0-9]+
Each instruction may have a debug location and a SIL scope reference
at the end. Debug locations consist of a filename, a line number, and
a column number. If the debug location is omitted, it defaults to the
location in the SIL source file. SIL scopes describe the position
inside the lexical scope structure that the Swift expression a SIL
instruction was generated from had originally. SIL scopes also hold
inlining information.
<rdar://problem/22706994>
Similarly to how we've always handled parameter types, we
now recursively expand tuples in result types and separately
determine a result convention for each result.
The most important code-generation change here is that
indirect results are now returned separately from each
other and from any direct results. It is generally far
better, when receiving an indirect result, to receive it
as an independent result; the caller is much more likely
to be able to directly receive the result in the address
they want to initialize, rather than having to receive it
in temporary memory and then copy parts of it into the
target.
The most important conceptual change here that clients and
producers of SIL must be aware of is the new distinction
between a SILFunctionType's *parameters* and its *argument
list*. The former is just the formal parameters, derived
purely from the parameter types of the original function;
indirect results are no longer in this list. The latter
includes the indirect result arguments; as always, all
the indirect results strictly precede the parameters.
Apply instructions and entry block arguments follow the
argument list, not the parameter list.
A relatively minor change is that there can now be multiple
direct results, each with its own result convention.
This is a minor change because I've chosen to leave
return instructions as taking a single operand and
apply instructions as producing a single result; when
the type describes multiple results, they are implicitly
bound up in a tuple. It might make sense to split these
up and allow e.g. return instructions to take a list
of operands; however, it's not clear what to do on the
caller side, and this would be a major change that can
be separated out from this already over-large patch.
Unsurprisingly, the most invasive changes here are in
SILGen; this requires substantial reworking of both call
emission and reabstraction. It also proved important
to switch several SILGen operations over to work with
RValue instead of ManagedValue, since otherwise they
would be forced to spuriously "implode" buffers.
For long names this is easier to read and in most cases the omitted information can be seen in the actual SIL code.
With the option -Xllvm -sil-full-demangle the old behavior can be restored.
This prevents the linker from trying to emit relative relocations to locally-defined public symbols into dynamic libraries, which gives ld.so heartache.
This will be used to help IRGen record protocol requirements
with resilient default implementations in protocol metadata.
To enable testing before all the Sema support is in place, this
patch adds SIL parser, printer and verifier support for default
witness tables.
For now, SILGen emits empty default witness tables for protocol
declarations in resilient modules, and IRGen ignores them when
emitting protocol metadata.
