Add `AdditiveArithmetic` derived conformances for structs and classes, gated by
the `-enable-experimental-differentiable-programming` flag.
Structs and classes whose stored properties all conform to `Differentiable` can
derive `Differentiable`:
- `associatedtype TangentVector: Differentiable & AdditiveArithmetic`
- Member `TangentVector` structs are synthesized whose stored properties are
all `var` stored properties that conform to `Differentiable` and that are
not `@noDerivative`.
- `mutating func move(along: TangentVector)`
The `@noDerivative` attribute may be declared on stored properties to opt out of
inclusion in synthesized `TangentVector` structs.
Some stored properties cannot be used in `TangentVector` struct synthesis and
are implicitly marked as `@noDerivative`, with a warning:
- `let` stored properties.
- These cannot be updated by `mutating func move(along: TangentVector)`.
- Non-`Differentiable`-conforming stored properties.
`@noDerivative` also implies `@_semantics("autodiff.nonvarying")`, which is
relevant for differentiable activity analysis.
Add type-checking and SILGen tests.
Resolves TF-845.
This will be used for compiler-driven type erasure for dynamic
replacement of functions with an opaque return type. For now, just
parse the attribute and ignore it.
The `@transpose(of:)` attribute registers a function as a transpose of another
function. This patch adds the `@transpose(of:)` attribute definition, syntax,
parsing, and printing.
Resolves TF-827.
Todos:
- Type-checking (TF-830, TF-1060).
- Enable serialization (TF-838).
- Use module-qualified names instead of custom qualified name syntax/parsing
(TF-1066).
State the previously unstated nested type requirement that CodingKeys adds to the witness requirements of a given type. The goal is to make this member cheap to synthesize, and independent of the expensive protocol conformance checks required to append it to the member list.
Further, this makes a clean conceptual separation between what I'm calling "nested type requirements" and actual type and value requirements.
With luck, we'll never have to use this attribute anywhere else.
The `@derivative(of:)` attribute registers a function as a derivative of another
function. This patch adds the `@derivative(of:)` attribute definition, syntax,
parsing, and printing.
Resolves TF-826.
Todos:
- Type-checking (TF-829).
- Serialization (TF-837).
We're planning to emit these attributes in module interfaces, but until
we land that patch, we want to parse these attributes and ignore them.
Part of rdar://51249311
We need this attribute to teach compiler to use a different name from the current
module name when generating runtime symbol names for a declaration. This is to serve
the workflow of refactoring a symbol from one library to another without breaking the existing
ABI.
This patch focuses on parsing and serializing the attribute, so @_originallyDefinedIn
will show up in AST, swiftinterface files and swiftmodule files.
rdar://55268186
This PR introduces `@differentiable` attribute to mark functions as differentiable. This PR only contains changes related to parsing the attribute. Type checking and other changes will be added in subsequent patches.
See https://github.com/apple/swift/pull/27506/files#diff-f3216f4188fd5ed34e1007e5a9c2490f for examples and tests for the new attribute.
This is just for prototyping purposes. I also had to loosen a small restriction
where semantics functions were not allowed in local contexts. There really is no
reason to enforce this and I think since it came in the first commit that
introduced semanitcs it was most likely NadavR just being conservative and
careful.
Adds parsing for a type attribute `@differentiable`, which is optionally allowed to have argument `@differentiable(linear)`.
The typechecker currently rejects all uses of `@differentiable` with "error: attribute does not apply to type". Future work (https://bugs.swift.org/browse/TF-871https://bugs.swift.org/browse/TF-873) will update the typechecker to allow this attribute in places where it is allowed.
Resolves https://bugs.swift.org/browse/TF-822.
This non-user-facing attribute is used to denote pointer parameters
which do not accept pointers produced from temporary pointer conversions
such as array-to-pointer, string-to-pointer, and in some cases
inout-to-pointer.
This will make it easier to prototype diagnostics on specifically marked nominal
types. My intended usage would be to have a way to emit diagnostics if specific
instances of the nominal type are ever not on the stack.
Adding ABIBreakingToAdd and other options for decl attribute kind isn't
sufficient because future attributes may forget to add the ABI/API impact bits.
This patch introduces the opposite options of these breaking bits (ABIStableToAdd, etc)
, and adds several static assertions to ensure one of the opposite ABI/API impact
flags is explicitly specified.
ABI/API checker used to hard-code whether adding or removing of a
decl attribute could break the existing ABI/API. This is not ideal because
new attributes may be added to AST without updating the checker. After this
change, new decl attribute could be specified whether it has ABI/API
impact and the checker could pick up the knowledge instantly.
When the outermost property wrapper associated with a property has a
`wrapperValue`, create the projection property (with the `$` prefix)
at the same access level as the original property. This puts the
wrapped-value interface and the projection interface at the same level.
The newly-introduced @_projectionValueProperty attribute is implicitly
created to establish the link between the original property and the
projection value within module interfaces, where both properties will
be explicitly written out.
When an @_implementationOnly import includes Objective-C categories
for existing types, it's useful to be able to override the members
provided in those categories without exposing them to clients of the
framework being built. Allow this as long as the overriding
declaration is marked as @_implementationOnly itself, with an
additional check that the type of the declaration does not change.
(Normally overrides are allowed to change in covariant ways.)
Part of rdar://50827914
Introduce an attribute @_disfavoredOverload that can be used to state
that a particular declaration should be avoided if there is a
successful type-check for a non-@_disfavoredOverload. It's a way to
nudge overload resolution away from particular solutions.
When printing a swiftinterface, represent opaque result types using an attribute that refers to
the mangled name of the defining decl for the opaque type. To turn this back into a reference
to the right decl's implicit OpaqueTypeDecl, use type reconstruction. Since type reconstruction
doesn't normally concern itself with non-type decls, set up a lookup table in SourceFiles and
ModuleFiles to let us handle the mapping from mangled name to opaque type decl in type
reconstruction.
(Since we're invoking type reconstruction during type checking, when the module hasn't yet been
fully validated, we need to plumb a LazyResolver into the ASTBuilder in an unsightly way. Maybe
there's a better way to do this... Longer term, at least, this surface design gives space for
doing things more the right way--a more request-ified decl validator ought to be able to naturally
lazily service this request without the LazyResolver reference, and if type reconstruction in
the future learns how to reconstruct non-type decls, then the lookup tables can go away.)
This is an attribute that gets put on an import in library FooKit to
keep it from being a requirement to import FooKit. It's not checked at
all, meaning that in this form it is up to the author of FooKit to
make sure nothing in its API or ABI depends on the implementation-only
dependency. There's also no debugging support here (debugging FooKit
/should/ import the implementation-only dependency if it's present).
The goal is to get to a point where it /can/ be checked, i.e. FooKit
developers are prevented from writing code that would rely on FooKit's
implementation-only dependency being present when compiling clients of
FooKit. But right now it's not.
rdar://problem/48985979
This is like '@inlinable', except that the symbol does not have a public
entry point in the generated binary at all; it is deserialized and a copy
is always emitted into the client binary, with shared linkage.
Just like '@inlinable', if you apply this to an internal declaration it
becomes '@usableFromInline' automatically.
This uses the same mechanism as default arguments ever since Swift 4, so
it should work reasonably well, but there are rough edges with diagnostics
and such. Don't use this if you are not the standard library.
Fixes <rdar://problem/33767512>, <https://bugs.swift.org/browse/SR-5646>.
Previously we only permitted it on the accessor itself, but there is
no reason not to allow it on the storage declaration.
Fixes <https://bugs.swift.org/browse/SR-3624> / <rdar://problem/31865137>.
* Implement dynamically callable types (`@dynamicCallable`).
- Implement dynamically callable types as proposed in SE-0216.
- Dynamic calls are resolved based on call-site syntax.
- Use the `withArguments:` method if it's defined and there are no
keyword arguments.
- Otherwise, use the `withKeywordArguments:` method.
- Support multiple `dynamicallyCall` methods.
- This enables two scenarios:
- Overloaded `dynamicallyCall` methods on a single
`@dynamicCallable` type.
- Multiple `dynamicallyCall` methods from a `@dynamicCallable`
superclass or from `@dynamicCallable` protocols.
- Add `DynamicCallableApplicableFunction` constraint. This, used with
an overload set, is necessary to support multiple `dynamicallyCall`
methods.
