Like switch cases, a catch clause may now include a comma-
separated list of patterns. The body will be executed if any
one of those patterns is matched.
This patch replaces `CatchStmt` with `CaseStmt` as the children
of `DoCatchStmt` in the AST. This necessitates a number of changes
throughout the compiler, including:
- Parser & libsyntax support for the new syntax and AST structure
- Typechecking of multi-pattern catches, including those which
contain bindings.
- SILGen support
- Code completion updates
- Profiler updates
- Name lookup changes
`@differentiable` attributes may contain `where` clauses referencing generic
parameters from some generic context, just like `@_specialize` attributes.
Without special ASTScope support for `@differentiable` attributes,
ASTScopeLookup.cpp logic tries to resolve the generic parameter `DeclName`s in
`where` clauses based on source location alone
(`ASTScopeImpl::findChildContaining`) and fails.
The fix is to add a special `DifferentiableAttributeScope`, mimicking
`SpecializeAttributeScope`. Every `@differentiable` attribute has its own scope,
derived from the declaration on which it is declared. Unlike `@_specialize`,
`@differentiable` may also be declared on `AbstractStorageDecl` declarations
(subscripts and variables).
Upstreams https://github.com/apple/swift/pull/27451.
Progress towards TF-828: upstream `@differentiable` attribute type-checking.
Switch most callers to explicit indices. The exceptions lie in things that needs to manipulate the parsed output directly including the Parser and components of the ASTScope. These are included as friend class exceptions.
Like the last commit, SourceFile is used a lot by Parse and Sema, but
less so by the ClangImporter and (de)Serialization. Split it out to
cut down on recompilation times when something changes.
This commit does /not/ split the implementation of SourceFile out of
Module.cpp, which is where most of it lives. That might also be a
reasonable change, but the reason I was reluctant to is because a
number of SourceFile members correspond to the entry points in
ModuleDecl. Someone else can pick this up later if they decide it's a
good idea.
No functionality change.
Most of AST, Parse, and Sema deal with FileUnits regularly, but SIL
and IRGen certainly don't. Split FileUnit out into its own header to
cut down on recompilation times when something changes.
No functionality change.
If there are no braces, the start and end location of the range is
the same token, so don't create a TypeOrExtensionBody scope at all.
NFC for now, but this problem causes some tests to fail once we
enable cycle diagnostics.
To represent the abstracted interface of an opaque type, we need a generic signature that refines
the outer context generic signature with an additional generic parameter representing the underlying
type and its exposed constraints. Opaque types also need to be keyed by their originating decl, so
that we can treat values of the same opaque type as the same. When we check a FuncDecl with an
opaque type specified as its return type, create an OpaqueTypeDecl and associate it with the
originating decl. (A representation for *types* derived from the opaque decl will come next.)
`#assert` is a new static assertion statement that will let us write
tests for the new constant evaluation infrastructure that we are working
on. `#assert` works by lowering to a `Builtin.poundAssert` SIL
instruction. The constant evaluation infrastructure will look for these
SIL instructions, const-evaluate their conditions, and emit errors if
the conditions are non-constant or false.
This commit implements parsing, typechecking and SILGen for `#assert`.
Use ExtensionDecl::getExtendedNominal() to wire up extensions to their
nominal types early in type checking (the bindExtensions()) operation,
rather than going through type validation to do so.
Introduce ExtensionDecl::getExtendedNominal() to provide the nominal
type declaration that the extension declaration extends. Move most
of the existing callers of the callers to getExtendedType() over to
getExtendedNominal(), because they don’t need the full type information.
ExtensionDecl::getExtendedNominal() is itself not very interesting yet,
because it depends on getExtendedType().
For now, the accessors have been underscored as `_read` and `_modify`.
I'll prepare an evolution proposal for this feature which should allow
us to remove the underscores or, y'know, rename them to `purple` and
`lettuce`.
`_read` accessors do not make any effort yet to avoid copying the
value being yielded. I'll work on it in follow-up patches.
Opaque accesses to properties and subscripts defined with `_modify`
accessors will use an inefficient `materializeForSet` pattern that
materializes the value to a temporary instead of accessing it in-place.
That will be fixed by migrating to `modify` over `materializeForSet`,
which is next up after the `read` optimizations.
SIL ownership verification doesn't pass yet for the test cases here
because of a general fault in SILGen where borrows can outlive their
borrowed value due to being cleaned up on the general cleanup stack
when the borrowed value is cleaned up on the formal-access stack.
Michael, Andy, and I discussed various ways to fix this, but it seems
clear to me that it's not in any way specific to coroutine accesses.
rdar://35399664
Now, an AbstractFunctionDecl always stores a single parameter list.
Furthermore, ConstructorDecl and DestructorDecl always store a
ParamDecl for 'self'.
FuncDecl only has a 'self' if it is a member of a nominal type or
extension, so we tail-allocate the storage for it.
A better approach would be to split off ASTScopeKind::AbstractFunctionSelf
from ASTScopeKind::AbstractFunctionParams, but for now, hack things up at
the boundary to match the old behavior.
The storage kind has been replaced with three separate "impl kinds",
one for each of the basic access kinds (read, write, and read/write).
This makes it far easier to mix-and-match implementations of different
accessors, as well as subtleties like implementing both a setter
and an independent read/write operation.
AccessStrategy has become a bit more explicit about how exactly the
access should be implemented. For example, the accessor-based kinds
now carry the exact accessor intended to be used. Also, I've shifted
responsibilities slightly between AccessStrategy and AccessSemantics
so that AccessSemantics::Ordinary can be used except in the sorts of
semantic-bypasses that accessor synthesis wants. This requires
knowing the correct DC of the access when computing the access strategy;
the upshot is that SILGenFunction now needs a DC.
Accessor synthesis has been reworked so that only the declarations are
built immediately; body synthesis can be safely delayed out of the main
decl-checking path. This caused a large number of ramifications,
especially for lazy properties, and greatly inflated the size of this
patch. That is... really regrettable. The impetus for changing this
was necessity: I needed to rework accessor synthesis to end its reliance
on distinctions like Stored vs. StoredWithTrivialAccessors, and those
fixes were exposing serious re-entrancy problems, and fixing that... well.
Breaking the fixes apart at this point would be a serious endeavor.
* Implement #warning and #error
* Fix #warning/#error in switch statements
* Fix AST printing for #warning/#error
* Add to test case
* Add extra handling to ParseDeclPoundDiagnostic
* fix dumping
* Consume the right paren even in the failure case
* Diagnose extra tokens on the same line after a diagnostic directive
This has three principal advantages:
- It gives some additional type-safety when working
with known accessors.
- It makes it significantly easier to test whether a declaration
is an accessor and encourages the use of a common idiom.
- It saves a small amount of memory in both FuncDecl and its
serialized form.
Allow instance properties and methods to be referenced from
within a lazy property initializer, with or without explicit
'self.' qualification.
The old behavior in Swift 3 was an incredible combination
of odd quirks:
- If the lazy property had an explicitly-written type, it was
possible to reference instance members from the initializer
expression by explicitly prefixing 'self.'.
- However, if the lazy property type is inferred, it would
first be type checked in the initializer context, which
has no 'self' available.
- Unqualified references to instance members did not work
at all, because name lookup thought the "location" of the
lookup was outside of the body of the getter.
- Unqualified references to static properties worked, however
unqualified references to static methods did not, and
produced a bogus diagnostic, because one part of the name
lookup code thought that initializers were "instance
context" and another thought they were "static context".
This patch improves on the old behavior with the following
fixes:
- Give PatternBindingInitializers associated with lazy
properties an implicit 'self' declaration for use by
name lookup.
- In order to allow "re-parenting" the initializer after it
has been type checked into the body of the getter, "steal"
the initializer's 'self' when buiding the getter.
- Fix up name lookup and make it aware of the implicit
'self' decl of a PatternBindingInitializer.
This improves upon an earlier fix for this issue by Doug Gregor
which only worked with ASTScope enabled; the new fix is more
general and shares logic between the two name lookup
implementations.
Fixes <rdar://problem/16888679>, <https://bugs.swift.org/browse/SR-48>,
<https://bugs.swift.org/browse/SR-2203>,
<https://bugs.swift.org/browse/SR-4663>, and the countless other
dupes of this issue.
