Replace the true/maybe state that Builtin.canBeClass was returning by a
tri-state (yes, no, maybe) allowing the optimizer to use the definite no
answer. This removes the need of the sizeof check that we had in
isClassOrObjCExistential. It also removes the need to CSE this function since
in most cases we will be able to instantiate canBeClass to yes or no (vs maybe)
at compile time.
benchmark``````````````,``baserun0``,``optrun2``,``delta,``speedup
ClassArrayGetter```````,``988.00````,``337.00```,``644.00``,````````191.7%
DeltaBlue``````````````,``2429.00```,``1927.00``,``460.00``,````````23.9%
Dictionary`````````````,``1374.00```,``1231.00``,``129.00``,````````10.9%
Havlak`````````````````,``1079.00```,``911.00```,``124.00``,````````13.7%
Rectangles`````````````,``924.00````,``541.00```,``379.00``,````````70.1%
radar://16823238
Swift SVN r21331
This always wrapped a single GenericTypeParamDecl *, and provided no benefit
over just using the decl directly.
No (intended) functionality change.
Swift SVN r19628
No validation is done yet on whether the user-specified access control makes
sense in context, but all ValueDecls should at least /have/ accessibility now.
/Still/ no tests yet. They will be much easier to write once we're actually
enforcing access control and/or printing access control.
Swift SVN r19143
SILGen lowers this to unchecked_trivial_bit_cast or unchecked_ref_bit_cast based on the semantics of the input and output types, raising an unsupported error if one of the types are address-only.
Swift SVN r19058
These changes prevent a certain class of bogus errors, as well as several crashers. Unfortunately, though, they don't quite get us to the point where we can broadly use recursively defined protocol requirements, in the standard library. (To do so would require significant changes across the entire stack.)
Swift SVN r19019
This builtin only becomes unreachable when assert_configuration calls have been folded, allowing library-level checks to become unreachable based on the assert level.
Swift SVN r17322
Add Builtin.destroyArray, .copyArray, .takeArrayFrontToBack, and .takeArrayBackToFront, which perform bulk destroy/copy/take operations using memcpy/memmove, a loop, or a generic value witness.
Swift SVN r17009
This will allow stdlib code to explicitly mark branches it knows to be unreachable. Make this work with SIL diagnostics by lowering the builtin to a normal builtin_function_ref/apply in SILGen, and special-case handling the builtin in DCE by removing the apply along with the following dead instructions when we recognize an unreachable block.
Swift SVN r16745
This patch adds support for a builtin function assert_configuration that is
replaced by constant progpagation by an appropriate value dependent on a compile
time setting. This replacement can also be disabled when serializing sil for a
library.
Using this mechanism we implement assertions that can be disabled (or whose
behavior changes) depending on compile time build settings (Debug, Release,
DisableReplacement).
In the standard library we can now write one assert function that uses this
builtin function to provide different compile time selectable runtime behavior.
Example
Assert.swift:
@transparent
func assert<T : LogicValue>(
condition: @auto_closure () -> T, message: StaticString = StaticString(),
// Do not supply these parameters explicitly; they will be filled in
// by the compiler and aren't even present when asserts are disabled
file: StaticString = __FILE__, line: UWord = __LINE__
) {
// Only in debug mode.
if _isDebug() {
assert(condition().getLogicValue(), message, file, line)
}
}
AssertCommon.swift:
@transparent
func _isDebug() -> Bool {
return Int32(Builtin.assert_configuration()) == 0;
}
rdar://16458612
Swift SVN r16472
We can just get it from the instance type, if the instance type has been fully initialized, which is the case except during parsing of type decls when the decls' own types are being formed.
Swift SVN r15598
This builtin returns true for types that might be ObjC class types. We want to use this builtin to optimize away NSArray handling for non-object Array types, so it needs to persist in SIL long enough for specialization to do its thing, but we never actually want to pay a runtime cost for this check, so always lower it to a constant value at IRGen time. Handle this by having canBeObjCClass return a tri-state "yes/maybe/no" result. In SILGen, we only fold away obviously "yes" or "no" cases, and in IRGen, we fold away "maybe" cases as "yes".
The optimizer will need to learn about this builtin too, but that part isn't done yet.
Swift SVN r13980
GenericSignatures with no params or requirements are a bug, so verify that they don't happen by making GenericSignature::get return null and GenericFunctionType assert that it has a nonnull signature. Hack Sema not to try to produce nongeneric GenericFunctionTypes when a function in a local type in a generic function context is type-checked; there's a deeper modeling issue that needs to be fixed here, but that's beyond the scope of 1.0. Now that GenericSignature always has at least one subtype, its factories no longer need an independent ASTContext argument.
Swift SVN r13837
Change GenericFunctionType to reference a GenericSignature instead of containing its generic parameters and requirements in-line, and clean up some interface type APIs that awkwardly returned ArrayRef pairs to instead return GenericSignatures instead.
Swift SVN r13807
Most of the complexity here is teaching SILGen how to handle closed-over direct
accesses to observing properties, since all of the getter/setter/willSet/didSet
members of the property are actually full closures when in a function body.
We generate correct but really terrible code here, since the setter captures the
willset/didset members themselves. I'm not worrying about the performance of
this construct though, functionality is what matters.
Swift SVN r13778
now that they are implicitly updated. This exposes two things:
1) we're unncessarily serializing selfdecls in ctors and dtors.
2) The index pattern of a SubscriptDecl has no sensible DeclContext that
owns variables in it.
I'll deal with the first tomorrow, I'm not sure what to do with
the second one.
Swift SVN r13703
In the long term we want more detailed configurability of runtime checks, but for our short-term performance work we just want a blanket on/off switch. Add a StripRuntimeChecks SIL pass that, as a start, converts invocations of checked overflow builtins to the equivalent unchecked builtins and kills cond_fails. Expose it through the compiler with a -disable-all-runtime-checks switch.
NB: I haven't tested building the stdlib or running the tests with the switch thrown yet.
Swift SVN r12379
with qualifiers on it, we have two distinct types:
- LValueType(T) aka @lvalue T, which is used for mutable values on the LHS of an
assignment in the typechecker.
- InOutType(T) aka @inout T, which is used for @inout arguments, and the implicit
@inout self argument of mutable methods on value types. This type is also used
at the SIL level for address types.
While I detangled a number of cases that were checking for LValueType (without checking
qualifiers) and only meant @inout or @lvalue, there is more to be done here. Notably,
getRValueType() still strips @inout, which is totally and unbearably wrong.
Swift SVN r11727
(various) FunctionType::get's, ArrayType::get,
ArraySliceType::get, OptionalType::get, and a few
other places.
There is more to be done here, but this is all I plan to do
for now.
Swift SVN r11497
This completes the FileUnit refactoring. A module consists of multiple
FileUnits, which provide decls from various file-like sources. I say
"file-like" because the Builtin module is implemented with a single
BuiltinUnit, and imported Clang modules are just a single FileUnit source
within a module.
Most modules, therefore, contain a single file unit; only the main module
will contain multiple source files (and eventually partial AST files).
The term "translation unit" has been scrubbed from the project. To refer
to the context of declarations outside of any other declarations, use
"top-level" or "module scope". To refer to a .swift file or its DeclContext,
use "source file". To refer to a single unit of compilation, use "module",
since the model is that an entire module will be compiled with a single
driver call. (It will still be possible to compile a single source file
through the direct-to-frontend interface, but only in the context of the
whole module.)
Swift SVN r10837
The goal of this series of commits is to allow the main module to consist
of both source files and AST files, where the AST files represent files
that were already built and don't need to be rebuilt, or of Swift source
files and imported Clang headers that share a module (because they are in
the same target).
Currently modules are divided into different kinds, and that defines how
decls are looked up, how imports are managed, etc. In order to achieve the
goal above, that polymorphism should be pushed down to the individual units
within a module, so that instead of TranslationUnit, BuiltinModule,
SerializedModule, and ClangModule, we have SourceFile, BuiltinUnit,
SerializedFile, and ClangUnit. (Better names welcome.) At that point we can
hopefully collapse TranslationUnit into Module and make Module non-polymorphic.
This commit makes SourceFile the subclass of an abstract FileUnit, and
makes TranslationUnit hold an array of FileUnits instead of SourceFiles.
To demonstrate that this is actually working, the Builtin module has also
been converted to FileUnit: it is now a TranslationUnit containing a single
BuiltinUnit.
Swift SVN r10830
This lowers to a call to a to-be-written swift_once runtime function and will be used for lazy global initialization. Having this be a builtin seemed appropriate to me given that:
- references to it will be implicitly emitted by SILGen for global initializers.
- there are restrictions on its correct use that are currently impossible to express in the language outside of the stdlib.
Swift SVN r10508
