It looks like the only thing that fails is the linkage computation
for the dynamic replacement key of class methods. Even though
methods have hidden linkage to prevent them from being directly
referenced from outside a resilient module, we need to ensure
the dynamic replacement key is visible.
Fixes <rdar://problem/58457716>.
A [onstack] closure does not take ownership of its arguments. It is
therefore not correct to use an initWithTake copy of indirect arguments.
Instead we just capture the address of the indirect argument.
rdar://61261982
Without whole module optimization, the metadata accessors are emitted on
a per-file basis. The result is that if the file containing a generic
type is processed before the file containing a usage of that type that
would result in that prespecialization, the metadata accessor would have
already been emitted by the time that the usage is noted, making it
impossible for the newly created prespecialization to be returned from
the already-emitted metadata accessor.
Here, require that either whole module optimization is enabled so that
the metadata accessors are all emitted at once at the end, or else that
the usage of the prespecialization is in the same file as the type is
declared.
Type layout based witness generation can emit quite complex IR that will
lead to code bloat if the llvm optimizer is not run.
No need to use type layouts at Onone.
rdar://61155295
This reverts commit f0cdd76f18, reversing
changes made to 703fe0f1a1.
Revert "IRGen: Refactor getObjCEncodingForMethod and getObjectEncodingFromClangNode into one"
This reverts commit 0082682b0d.
Revert "Merge pull request #30438 from aschwaighofer/irgen_prefer_clang_type_encoding"
This reverts commit eeb7fa52b2, reversing
changes made to 77af77fa8a.
Revert "Merge pull request #30433 from aschwaighofer/irgen_no_duplicate_objc_method_descriptor_entries"
This reverts commit 77af77fa8a, reversing
changes made to 841eeb05b0.
This reverts the changes for
rdar://60461850, rdar://60474785, rdar://60778637
There is still at least an issue that we address with PR#30654.
Revert until we have confidence that this is the right fix set.
This commit focuses the basics: setting up the relevant stanzas in
lit.cfg and adding platform conditionals for importing Glibc. Future
commits will deal with other portability fixes.
We want to be able to use mangled names to refer to protocol conformances in addition to type
metadata. Provide an ASTMangler method that can render an arbitrary abstract or concrete
`ProtocolConformanceRef`, factoring it out of the code used to emit conditional conformance arguments
in `appendProtocolConformance`.
If there the layout is not dependent on archetypes and but has resilient types
using the new type layout based approach is not going to be faster.
rdar://59960653
When a method is called with fewer than two parameter lists,
transform it into a fully-applied call by wrapping it in a
closure.
Eg,
Foo.bar => { self in { args... self.bar(args...) } }
foo.bar => { self in { args... self.bar(args...) } }(self)
super.bar => { args... in super.bar(args...) }
With this change, SILGen only ever sees fully-applied calls,
which will allow ripping out some code.
This new way of doing curry thunks fixes a long-standing bug
where unbound references to protocol methods did not work.
This is because such a reference must open the existential
*inside* the closure, after 'self' has been applied, whereas
the old SILGen implementation of curry thunks really wanted
the type of the method reference to match the opened type of
the method.
A follow-up cleanup will remove the SILGen curry thunk
implementation.
Fixes rdar://21289579 and https://bugs.swift.org/browse/SR-75.
Before this patch we used to get duplicate entries because we would
define implicit function delcarations, e.g for
(func_decl "perform(_:)" interface type='<Self where Self : NSObjectProtocol> (Self) -> (Selector?) -> Unmanaged<AnyObject>?' access=public @objc
(parameter "self")
(parameter_list
(parameter "aSelector" type='Selector?' interface type='Selector?')))
we will define:
(func_decl implicit "performSelector(_:)" access=public @objc
(parameter "self")
(parameter_list
(parameter "aSelector" type='Selector?' interface type='Selector?')))
rdar://60461850
* Use in_guaranteed for let captures
With this all let values will be captured with in_guaranteed convention
by the closure. Following are the main changes :
SILGen changes:
- A new CaptureKind::Immutable is introduced, to capture let values as in_guaranteed.
- SILGen of in_guaranteed capture had to be fixed.
in_guaranteed captures as per convention are consumed by the closure. And so SILGen should not generate a destroy_addr for an in_guaranteed capture.
But LetValueInitialization can push Dealloc and Release states of the captured arg in the Cleanup stack, and there is no way to access the CleanupHandle and disable the emission of destroy_addr while emitting the captures in SILGenFunction::emitCaptures.
So we now create, temporary allocation of the in_guaranteed capture iduring SILGenFunction::emitCaptures without emitting destroy_addr for it.
SILOptimizer changes:
- Handle in_guaranteed in CopyForwarding.
- Adjust dealloc_stack of in_guaranteed capture to occur after destroy_addr for on_stack closures in ClosureLifetimeFixup.
IRGen changes :
- Since HeapLayout can be non-fixed now, make sure emitSize is used conditionally
- Don't consider ClassPointerSource kind parameter type for fulfillments while generating code for partial apply forwarder.
The TypeMetadata of ClassPointSource kind sources are not populated in HeapLayout's NecessaryBindings. If we have a generic parameter on the HeapLayout which can be fulfilled by a ClassPointerSource, its TypeMetaData will not be found while constructing the dtor function of the HeapLayout.
So it is important to skip considering sources of ClassPointerSource kind, so that TypeMetadata of a dependent generic parameters gets populated in HeapLayout's NecessaryBindings.
In order to allow this, I've had to rework the syntax of substituted function types; what was previously spelled `<T> in () -> T for <X>` is now spelled `@substituted <T> () -> T for <X>`. I think this is a nice improvement for readability, but it did require me to churn a lot of test cases.
Distinguishing the substitutions has two chief advantages over the existing representation. First, the semantics seem quite a bit clearer at use points; the `implicit` bit was very subtle and not always obvious how to use. More importantly, it allows the expression of generic function types that must satisfy a particular generic abstraction pattern, which was otherwise impossible to express.
As an example of the latter, consider the following protocol conformance:
```
protocol P { func foo() }
struct A<T> : P { func foo() {} }
```
The lowered signature of `P.foo` is `<Self: P> (@in_guaranteed Self) -> ()`. Without this change, the lowered signature of `A.foo`'s witness would be `<T> (@in_guaranteed A<T>) -> ()`, which does not preserve information about the conformance substitution in any useful way. With this change, the lowered signature of this witness could be `<T> @substituted <Self: P> (@in_guaranteed Self) -> () for <A<T>>`, which nicely preserves the exact substitutions which relate the witness to the requirement.
When we adopt this, it will both obviate the need for the special witness-table conformance field in SILFunctionType and make it far simpler for the SILOptimizer to devirtualize witness methods. This patch does not actually take that step, however; it merely makes it possible to do so.
As another piece of unfinished business, while `SILFunctionType::substGenericArgs()` conceptually ought to simply set the given substitutions as the invocation substitutions, that would disturb a number of places that expect that method to produce an unsubstituted type. This patch only set invocation arguments when the generic type is a substituted type, which we currently never produce in type-lowering.
My plan is to start by producing substituted function types for accessors. Accessors are an important case because the coroutine continuation function is essentially an implicit component of the function type which the current substitution rules simply erase the intended abstraction of. They're also used in narrower ways that should exercise less of the optimizer.
In order for the runtime demangler to be able to find ObjC classes and protocols, it needs to
have the runtime name of the declaration be in the mangled name. Only do this for runtime manglings,
to minimize the potential ABI impact for symbol names that already have the source-level names of
ObjC entities baked in. Fixes SR-12169 | rdar://59306590.
I enabled this recently by piggybacking it in the mega-commit:
commit badc5658bb
Author: Andrew Trick <atrick@apple.com>
Date: Mon Mar 2 16:23:53 2020
Fix SIL MemBehavior queries with access markers.
It miscompiles SwiftNIO's NIOPerformanceTester benchmark causing it to
segfault immediately.
We may consider debugging this to reenable it in the future...
<rdar://60068448> Teach IRGen to emit !invariant metadata for 'let' variables
Fixes <rdar://60038603> Swift CI: SwiftNIO_macOS NIOHTTP2_macOS fails
Augment the `isSingleRetainablePointer` check that allows IRGen to avoid adding branching around retain/release operations on enums that use the null pointer extra inhabitant with a more general "can value witness extra inhabitants" method on TypeInfo, which says whether a type's retain/release operations are safe to invoke on some or all of its extra inhabitants. This lets us generalize the optimization to include things like `String?` or `ClassProtocol?` which are common types with a nullable pointer in them.
This is in prepration for other bug fixes.
Clarify the SIL utilities that return canonical address values for
formal access given the address used by some memory operation:
- stripAccessMarkers
- getAddressAccess
- getAccessedAddress
These are closely related to the code in MemAccessUtils.
Make sure passes use these utilities consistently so that
optimizations aren't defeated by normal variations in SIL patterns.
Create an isLetAddress() utility alongside these basic utilities to
make sure it is used consistently with the address corresponding to
formal access. When this query is used inconsistently, it defeats
optimization. It can also cause correctness bugs because some
optimizations assume that 'let' initialization is only performed on a
unique address value.
Functional changes to Memory Behavior:
- An instruction with side effects now conservatively still has side
effects even when the queried value is a 'let'. Let values are
certainly sensitive to side effects, such as the parent object being
deallocated.
- Return the correct MemBehavior for begin/end_access markers.
