The recursivelyDeleteTriviallyDeadInstructions utility takes a
callBack to be called for every deleted instruction. However, it
wasn't passing this callBack to eraseFromParentWithdebugInsts. The
callback was used to update an iterator in some cases, so not calling
it resulted in iterator invalidation.
Doing this also cleans up the both APIs:
recursivelyDeleteTriviallyDeadInstructions and eraseFromParentWithdebugInsts.
This utility is generally a horrible idea but even worse the
callers were not doing anything to ensure the required
invariants actually held.
Add a new canReplaceLoadSequence() method and chek it in the
right places.
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
This allows Swift code to implement a fast path via a protocol type
check as follows:
if let existentialVal = genericVal as? SomeProtocol {
// do something fast.
}
Fixes <rdar://problem/46322928> Failure to devirtualize a protocol
method applied to an opened existential blocks implemention of
DataProtocol.
Note: the approach of devirtualization via backward pattern matching
is fundamentally wrong and will never be fully general. It should be a
forward type propagation.
Rewrite the SILCLoners used in SimplifyCFG. For convenience, there is
now simply a BasicBlockCloner and a SILFunctionCloner. It's pretty
obvious what they do and almost impossible to use incorrectly.
This is worthwhile on its own just to make the usage clear, but the
real reason is that after this cleanup, it will be possible to remove
many extraneous calls to global critical edge splitting related to
cloning.
Mostly functionally neutral:
- may fix latent bugs.
- may reduce useless basic blocks after inlining.
This rewrite encapsulates the cloner's internal state, providing a
clean API for the CRTP subclasses. The subclasses are rewritten to use
the exposed API and extension points. This makes it much easier to
understand, work with, and extend SIL cloners, which are central to
many optimization passes. Basic SIL invariants are now clearly
expressed and enforced. There is no longer a intricate dance between
multiple levels of subclasses operating on underlying low-level data
structures. All of the logic needed to keep the original SIL in a
consistent state is contained within the SILCloner itself. Subclasses
only need to be responsible for their own modifications.
The immediate motiviation is to make CFG updates self-contained so
that SIL remains in a valid state. This will allow the removal of
critical edge splitting hacks and will allow general SIL utilities to
take advantage of the fact that we don't allow critical edges.
This rewrite establishes a simple principal that should be followed
everywhere: aside from the primitive mutation APIs on SIL data types,
each SIL utility is responsibile for leaving SIL in a valid state and
the logic for doing so should exist in one central location.
This includes, for example:
- Generating a valid CFG, splitting edges if needed.
- Returning a valid instruction iterator if any instructions are removed.
- Updating dominance.
- Updating SSA (block arguments).
(Dominance info and SSA properties are fundamental to SIL verification).
LoopInfo is also somewhat fundamental to SIL, and should generally be
updated, but it isn't required.
This also fixes some latent bugs related to iterator invalidation in
recursivelyDeleteTriviallyDeadInstructions and SILInliner. Note that
the SILModule deletion callback should be avoided. It can be useful as
a simple cache invalidation mechanism, but it is otherwise bug prone,
too limited to be very useful, and basically bad design. Utilities
that mutate should return a valid instruction iterator and provide
their own deletion callbacks.
With removing of pinning and with addressors, the pattern matching did not work anymore.
The good thing is that the SIL is now much simpler and we can handle the 2D case without pattern matching at all.
This removes a lot of code from COWArrayOpts.
rdar://problem/43863081
NOTE: This is not the final form of how operand ownership restraints will be
represented. This patch is instead an incremental change that extracts out this
functionality from the ownership verifier as a pure refactor.
rdar://44667493
The optimizations now handle the ref_tail_addr instructions for detecting element addresses
(in addition to the array semantics function _getElementAddress).
After _modify for Array subscript lands, we can get rid of _getElementAddress at all.
SIL passes were violating the existing invariant on non-cond-br
critical edges in several places. I fixed the places that I could
find. Wherever there was a post-pass to "clean up" critical edges, I
replaced it with a a call to verification that the critical edges
aren't broken in the first place.
We still need to eliminate critical edges entirely before enabling
ownership SIL.
This utility works by taking in a function_ref and then traverses the transitive
uses of the function_ref until it finds either a use it does not understand
"escape" or an "apply" instruction. It returns a result structure that contains
the final found applications and more importantly a bool telling the caller if
we found any "escaping" uses.
This is intended to be an inverse operation to ApplySite::getCalleeOrigin(). As
such it has a bunch of assertions in it that check that the two stay in sync.
rdar://41146023
In order to make this reasonable, I needed to shift responsibilities
around a little; the devirtualization operation is now responsible for
replacing uses of the original apply. I wanted to remove the
phase-separation completely, but there was optimization-remark code
relying on the old apply site not having been deleted yet.
The begin_apply aspects of this aren't testable independently of
replacing materializeForSet because coroutines are currently never
called indirectly.
Create helpers in InstructionUtils.h wherever we need a guarantee that the diagnostics cover the same patterns as the verifier. Eventually this will be called from both SILVerifier and the diagnostic pass:
- findAccessedAddressBase
- isPossibleFormalAccessBase
- isPartialApplyOfReabstractionThunk
- findClosureForAppliedArg
- visitAccessedAddress
Add partial_apply verification assert.
This applies the normal "find a closure" logic inside the "find all partial_apply uses" verification. Making the verifier round-trip ensures that we don't have holes in exclusivity enforcement related to this logic.
We run GlobalOpt multiple times in the pass pipeline but in some cases object outlining shouldn't be done too early.
Having it done in a separate pass enables to run it independently from GlobalOpt.
We run GlobalOpt multiple times in the pass pipeline but in some cases object outlining shouldn't be done too early.
Having it done in a separate pass enables to run it independently from GlobalOpt.
Local.cpp was ~3k lines of which 1.5k (i.e. 1/2) was the cast optimizer. This
commit extracts the cast optimizer into its own .cpp and .h file. It is large
enough to stand on its own and allows for Local.cpp to return to being a small
group of helper functions.
I am making some changes in this area due to the change in certain function
conventions caused by the +0-normal-arg work. I am just trying to leave the area
a little cleaner than before.
introduce a common superclass, SILNode.
This is in preparation for allowing instructions to have multiple
results. It is also a somewhat more elegant representation for
instructions that have zero results. Instructions that are known
to have exactly one result inherit from a class, SingleValueInstruction,
that subclasses both ValueBase and SILInstruction. Some care must be
taken when working with SILNode pointers and testing for equality;
please see the comment on SILNode for more information.
A number of SIL passes needed to be updated in order to handle this
new distinction between SIL values and SIL instructions.
Note that the SIL parser is now stricter about not trying to assign
a result value from an instruction (like 'return' or 'strong_retain')
that does not produce any.
The main loop of mandatory inlining is spending a lot of time managing complex
iterator invalidation issues. This is the first in a series of commits that move
the main inlining loop to only delete the callee and to do all cleanups after we
have finished inlining.
This specific optimization (the quick retain/release peephole), I am not going
to do in MandatoryInlining, we already have guaranteed arc opts afterwards that
will be able to hit such a peephole so no perf should be lost.
*NOTE* The reason why I had to touch some of the code motion tests is that the
routine I am using to ensure that strong_retain/release_value is emitted as
appropriate is also used by codemotion. Code motion tests had cargo culted some
code from previous tests that retained Builtin.Int32. I changed the routines
though so that when a retain/release is inserted, if it is trivial, nothing is
inserted. No routine was relying on the actual usage of the inserted
retain/releases, so everything will be safe. This addition to the relevant code
caused me to need to change the tests in code motion to use actual non-trivial
values. The same code paths are being tested in terms of blocking code
motion/etc.
rdar://31521023
In dead-array elimination we assume that the array allocation is post-dominated by all its final releases.
The only exception are branches to dead-end ("unreachable") blocks. So we just ignored all paths which didn't end up in a final release.
Now we explicitly pass the set of dead-end blocks and just ignore those blocks.
This is safer and it's also needed in the upcoming re-write of StackPromotion.
It looks like the devirtualizer used to have problems computing
method types in the presence of generic substitutions, covariant
returns and other things, so it would bail if a perticular set
of pre-conditions was not met on the types of original method call
and the devirtualized method call.
I don't think any of this is necessary anymore. If this patch
introduces any regressions, we need to fix the root cause instead
of re-introducing this logic.
SubstitutionList is going to be a more compact representation of
a SubstitutionMap, suitable for inline allocation inside another
object.
For now, it's just a typedef for ArrayRef<Substitution>.
We preserve the current behavior of assuming Any ownership always and use
default arguments to hide this change most of the time. There are asserts now in
the SILBasicBlock::{create,replace,insert}{PHI,Function}Argument to ensure that
the people can only create SILFunctionArguments in entry blocks and
SILPHIArguments in non-entry blocks. This will ensure that the code in tree
maintains the API distinction even if we are not using the full distinction in
between the two.
Once the verifier is finished being upstreamed, I am going to audit the
createPHIArgument cases for the proper ownership. This is b/c I will be able to
use the verifier to properly debug the code. At that point, I will also start
serializing/printing/parsing the ownershipkind of SILPHIArguments, but lets take
things one step at a time and move incrementally.
In the process, I also discovered a CSE bug. I am not sure how it ever worked.
Basically we replace an argument with a new argument type but return the uses of
the old argument to refer to the old argument instead of a new argument.
rdar://29671437
Before this commit all code relating to handling arguments in SILBasicBlock had
somewhere in the name BB. This is redundant given that the class's name is
already SILBasicBlock. This commit drops those names.
Some examples:
getBBArg() => getArgument()
BBArgList => ArgumentList
bbarg_begin() => args_begin()
This eliminates all inline creation of SILBasicBlock via placement new.
There are a few reasons to do this:
1. A SILBasicBlock is always created with a parent function. This commit
formalizes this into the SILBasicBlock API by only allowing for SILFunctions to
create SILBasicBlocks. This is implemented via the type system by making all
SILBasicBlock constructors private. Since SILFunction is a friend of
SILBasicBlock, SILFunction can still create a SILBasicBlock without issue.
2. Since all SILBasicBlocks will be created in only a few functions, it becomes
very easy to determine using instruments the amount of memory being allocated
for SILBasicBlocks by simply inverting the call tree in Allocations.
With LTO+PGO, normal inlining can occur if profitable so there shouldn't be
overhead that we care about in shipping compilers.
