The determination of whether a property is memberwise-initialized is
somewhat confused for properties that have synthesized backing properties.
Some clients (Sema/Index) want to see the declared properties, while others
(SILGen) want to see the backing stored properties. Add a flag to
`VarDecl::isMemberwiseInitialized()` to capture this variation.
This utility was defined in Sema, used in Sema and Index, declared in
two headers, and semi- copy-pasted into SILGen. Pull it into
VarDecl::isMemberwiseInitialized() and use it consistently.
To represent the abstracted interface of an opaque type, we need a generic signature that refines
the outer context generic signature with an additional generic parameter representing the underlying
type and its exposed constraints. Opaque types also need to be keyed by their originating decl, so
that we can treat values of the same opaque type as the same. When we check a FuncDecl with an
opaque type specified as its return type, create an OpaqueTypeDecl and associate it with the
originating decl. (A representation for *types* derived from the opaque decl will come next.)
When building the implicit subscript expression, set the "implicit" bit
correctly and pass it through in the indexer so that we get implicit
refernces to the subscript. This would be useful for e.g. searching for
all uses of the dynamic subscript.
Fixes various places where we assume that only a VarDecl can be static so they operate on any AbstractStorageDecl instead. NFC until static subscripts are added.
While checking for superclasses in isUnitTest, we need to handle
circular inheritance. For good measure, add tests for protocols as well.
The new API is designed to behave the same as walkInheritedProtocols
except that is walks over superclasses.
rdar://49434989
This is an attribute that gets put on an import in library FooKit to
keep it from being a requirement to import FooKit. It's not checked at
all, meaning that in this form it is up to the author of FooKit to
make sure nothing in its API or ABI depends on the implementation-only
dependency. There's also no debugging support here (debugging FooKit
/should/ import the implementation-only dependency if it's present).
The goal is to get to a point where it /can/ be checked, i.e. FooKit
developers are prevented from writing code that would rely on FooKit's
implementation-only dependency being present when compiling clients of
FooKit. But right now it's not.
rdar://problem/48985979
...in preparation for me adding a third kind of import, making the
existing "All" kind a problem. NFC, except that I did rewrite the
ClangModuleUnit implementation of getImportedModules to be simpler!
We weren't renaming all occurrences of 'x' in the cases like the below:
case .first(let x), .second(let x):
print("foo \(x)")
fallthrough
case .third(let x):
print("bar \(x)")
We would previously only rename occurrences within the case statement the query
was made in (ignoring fallthroughs) and for cases with multiple patterns (as in
the first case above) we would only rename the occurrence in the first pattern.
This is a follow up to the discussion on #22740 to switch the host
libraries to use the `target_link_libraries` rather than the
`LINK_LIBRARIES` special handling. This allows the dependency to be
properly tracked by CMake and allows us to use the more modern syntax.
When conforming to a protocol, the index should have a "override"
relation for each witness, including type witnesses. This was
accidentally broken in 3bd80e5e31 when we stopped using the
type-checker to find all protocol conformances.
rdar://47833618
When debugging Objective-C or C++ code on Darwin, the debug info
collected by dsymutil in the .dSYM bundle is entirely
self-contained. It is possible to debug a program, set breakpoints and
print variables even without having the complete original source code
or a matching SDK available. With Swift, this is currently not the
case. Even though .dSYM bundles contain the binary .swiftmodule for
all Swift modules, any Clang modules that the Swift modules depend on,
still need to be imported from source to even get basic LLDB
functionality to work. If ClangImporter fails to import a Clang
module, effectively the entire Swift module depending on it gets
poisoned.
This patch is addressing this issue by introducing a ModuleLoader that
can ask queries about Clang Decls to LLDB, since LLDB knows how to
reconstruct Clang decls from DWARF and clang -gmodules producxes full
debug info for Clang modules that is embedded into the .dSYM budle.
This initial version does not contain any advanced functionality at
all, it merely produces an empty ModuleDecl. Intertestingly, even this
is a considerable improvement over the status quo. LLDB can now print
Swift-only variables in modules with failing Clang depenecies, and
becuase of fallback mechanisms that were implemented earlier, it can
even display the contents of pure Objective-C objects that are
imported into Swift. C structs obviously don't work yet.
rdar://problem/36032653
This reverts commit 121f5b64be.
Sorry to revert this again. This commit makes some pretty big changes. After
messing with the merge-conflict created by this internally, I did not feel
comfortable landing this now. I talked with Saleem and he agreed with me that
this was the right thing to do.
The key thing here is that all of the underlying code is exactly the same. I
purposely did not debride anything. This is to ensure that I am not touching too
much and increasing the probability of weird errors from occurring. Thus the
exact same code should be executed... just the routing changed.
Module references get indexed as a 'module' symbol; they get USRs similar to how clang would assign a USR for a module reference.
JIRA: https://bugs.swift.org/browse/SR-8677
A few places around the compiler were checking for this module by its
name. The implementation still checks by name, but at least that only
has to occur in one place.
(Unfortunately I can't eliminate the string constant altogether,
because the implicit import for SwiftOnoneSupport happens by name.)
No functionality change.
Query for the local conformances of a DeclContext and record conformances of
functions that are defined in other types as 'implicit' overrides, with
the type that introduces the conformance as container symbol.
This allows more accurate index data, and avoids needing to query for all
protocol requirements, which is expensive to calculate.
Most of this patch is just removing special cases for materializeForSet
or other fairly mechanical replacements. Unfortunately, the rest is
still a fairly big change, and not one that can be easily split apart
because of the quite reasonable reliance on metaprogramming throughout
the compiler. And, of course, there are a bunch of test updates that
have to be sync'ed with the actual change to code-generation.
This is SR-7134.
- getAsDeclOrDeclExtensionContext -> getAsDecl
This is basically the same as a dyn_cast, so it should use a 'getAs'
name like TypeBase does.
- getAsNominalTypeOrNominalTypeExtensionContext -> getSelfNominalTypeDecl
- getAsClassOrClassExtensionContext -> getSelfClassDecl
- getAsEnumOrEnumExtensionContext -> getSelfEnumDecl
- getAsStructOrStructExtensionContext -> getSelfStructDecl
- getAsProtocolOrProtocolExtensionContext -> getSelfProtocolDecl
- getAsTypeOrTypeExtensionContext -> getSelfTypeDecl (private)
These do /not/ return some form of 'this'; instead, they get the
extended types when 'this' is an extension. They started off life with
'is' names, which makes sense, but changed to this at some point. The
names I went with match up with getSelfInterfaceType and
getSelfTypeInContext, even though strictly speaking they're closer to
what getDeclaredInterfaceType does. But it didn't seem right to claim
that an extension "declares" the ClassDecl here.
- getAsProtocolExtensionContext -> getExtendedProtocolDecl
Like the above, this didn't return the ExtensionDecl; it returned its
extended type.
This entire commit is a mechanical change: find-and-replace, followed
by manual reformatted but no code changes.
Introduce ExtensionDecl::getExtendedNominal() to provide the nominal
type declaration that the extension declaration extends. Move most
of the existing callers of the callers to getExtendedType() over to
getExtendedNominal(), because they don’t need the full type information.
ExtensionDecl::getExtendedNominal() is itself not very interesting yet,
because it depends on getExtendedType().
For now, the accessors have been underscored as `_read` and `_modify`.
I'll prepare an evolution proposal for this feature which should allow
us to remove the underscores or, y'know, rename them to `purple` and
`lettuce`.
`_read` accessors do not make any effort yet to avoid copying the
value being yielded. I'll work on it in follow-up patches.
Opaque accesses to properties and subscripts defined with `_modify`
accessors will use an inefficient `materializeForSet` pattern that
materializes the value to a temporary instead of accessing it in-place.
That will be fixed by migrating to `modify` over `materializeForSet`,
which is next up after the `read` optimizations.
SIL ownership verification doesn't pass yet for the test cases here
because of a general fault in SILGen where borrows can outlive their
borrowed value due to being cleaned up on the general cleanup stack
when the borrowed value is cleaned up on the formal-access stack.
Michael, Andy, and I discussed various ways to fix this, but it seems
clear to me that it's not in any way specific to coroutine accesses.
rdar://35399664
Now, an AbstractFunctionDecl always stores a single parameter list.
Furthermore, ConstructorDecl and DestructorDecl always store a
ParamDecl for 'self'.
FuncDecl only has a 'self' if it is a member of a nominal type or
extension, so we tail-allocate the storage for it.
The storage kind has been replaced with three separate "impl kinds",
one for each of the basic access kinds (read, write, and read/write).
This makes it far easier to mix-and-match implementations of different
accessors, as well as subtleties like implementing both a setter
and an independent read/write operation.
AccessStrategy has become a bit more explicit about how exactly the
access should be implemented. For example, the accessor-based kinds
now carry the exact accessor intended to be used. Also, I've shifted
responsibilities slightly between AccessStrategy and AccessSemantics
so that AccessSemantics::Ordinary can be used except in the sorts of
semantic-bypasses that accessor synthesis wants. This requires
knowing the correct DC of the access when computing the access strategy;
the upshot is that SILGenFunction now needs a DC.
Accessor synthesis has been reworked so that only the declarations are
built immediately; body synthesis can be safely delayed out of the main
decl-checking path. This caused a large number of ramifications,
especially for lazy properties, and greatly inflated the size of this
patch. That is... really regrettable. The impetus for changing this
was necessity: I needed to rework accessor synthesis to end its reliance
on distinctions like Stored vs. StoredWithTrivialAccessors, and those
fixes were exposing serious re-entrancy problems, and fixing that... well.
Breaking the fixes apart at this point would be a serious endeavor.
Introduce some metaprogramming of accessors and generally prepare
for storing less-structured accessor lists.
NFC except for a change to the serialization format.
* Implement #warning and #error
* Fix #warning/#error in switch statements
* Fix AST printing for #warning/#error
* Add to test case
* Add extra handling to ParseDeclPoundDiagnostic
* fix dumping
* Consume the right paren even in the failure case
* Diagnose extra tokens on the same line after a diagnostic directive
This has three principal advantages:
- It gives some additional type-safety when working
with known accessors.
- It makes it significantly easier to test whether a declaration
is an accessor and encourages the use of a common idiom.
- It saves a small amount of memory in both FuncDecl and its
serialized form.
Ok, so behind the scenes SourceEntityWalker is still using
Expr::getLValueAccessKind(). But now that SourceEntityWalker
is really the *only* remaining client, it makes sense to
refactor the calculation of this into a separate pass, which
only SourceKit needs to use.
"Accessibility" has a different meaning for app developers, so we've
already deliberately excised it from our diagnostics in favor of terms
like "access control" and "access level". Do the same in the compiler
now that we aren't constantly pulling things into the release branch.
Rename AccessibilityAttr to AccessControlAttr and
SetterAccessibilityAttr to SetterAccessAttr, then track down the last
few uses of "accessibility" that don't have to do with
NSAccessibility. (I left the SourceKit XPC API alone because that's
supposed to be more stable.)
"Accessibility" has a different meaning for app developers, so we've
already deliberately excised it from our diagnostics in favor of terms
like "access control" and "access level". Do the same in the compiler
now that we aren't constantly pulling things into the release branch.
This commit changes the 'Accessibility' enum to be named 'AccessLevel'.
