There's no need to walk all imports of all source files, and bind the
extensions defined therein. The only time that a non-main module
contains source files is when using -enable-source-import, and we
can just explicitly call bindExtensions() in the right place.
Add ModuleImplicitImportsRequest, which computes
the modules that should be implicitly imported by
each file of a given module. Use this request in
import resolution to add all the necessary
implicit imports.
The request computes the implicit imports by
consulting the ImplicitImportInfo, which ModuleDecl
can now be created with. This allows us to remove
uses of `SourceFile::addImports` in favor of
adding modules needed to be implicitly imported to
the ImplicitImportInfo.
Instead of interleaving typechecking and parsing
for SIL files, first parse the file for Swift
decls by skipping over any intermixed SIL decls.
Then we can perform type checking, and finally SIL
parsing where we now skip over Swift decls.
This is an intermediate step to requestifying the
parsing of a source file for its Swift decls.
An awful pattern we use throughout the compiler is to save and restore global flags just for little things. In this case, it was just to turn on some extra options in AST printing for type variables. The kicker is that the ASTDumper doesn't even respect this flag. Add this as a PrintOption and remove the offending save-and-restores.
This doesn't quite get them all: we appear to have productized this pattern in the REPL.
Like the last commit, SourceFile is used a lot by Parse and Sema, but
less so by the ClangImporter and (de)Serialization. Split it out to
cut down on recompilation times when something changes.
This commit does /not/ split the implementation of SourceFile out of
Module.cpp, which is where most of it lives. That might also be a
reasonable change, but the reason I was reluctant to is because a
number of SourceFile members correspond to the entry points in
ModuleDecl. Someone else can pick this up later if they decide it's a
good idea.
No functionality change.
Most of AST, Parse, and Sema deal with FileUnits regularly, but SIL
and IRGen certainly don't. Split FileUnit out into its own header to
cut down on recompilation times when something changes.
No functionality change.
DelayedParsingCallbacks only had one implementation, for code
completion, which is only used to determine which bodies to skip and
which to delay. Inline that logic into the parser's delay logic and
remove DelayedParsingCallbacks entirely.
Use the delayed parsing of function bodies for source imports, and
switch source imports over to lazy type checking. There's no point in
doing a full type check for them.
Rework the lazy function body parsing mechanism to use the
request-evaluator, so that asking for the body of a function will
initiate parsing. Clean up a number of callers to
AbstractFunctionDecl::getBody() that don't actually need the body, so
we don't perform unnecessary parsing.
This change does not delay parsing of function bodies in the general
case; rather, it sets up the infrastructure to always delay parsing of
function bodies.
Rework the lazy function body parsing mechanism to use the
request-evaluator, so that asking for the body of a function will
initiate parsing. Clean up a number of callers to
AbstractFunctionDecl::getBody() that don't actually need the body, so
we don't perform unnecessary parsing.
This change does not delay parsing of function bodies in the general
case; rather, it sets up the infrastructure to always delay parsing of
function bodies.
Lazy parsing for the members of nominal types and extensions depends
only on information already present in
`IterableDeclContext`. Eliminate the use of PersistentParserState as
an intermediary and have the member-parsing request construct a new
`Parser` instance itself to handle parsing. Make this possible even
for ill-formed nominal types/extensions to simplify the code path.
Eliminate `LazyMemberParser` and all of its uses, because it was only
present for lazy member parsing, which no longer needs it.
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Adds the -vfsoverlay frontend option that enables the user to pass
VFS overlay YAML files to Swift. These files define a (potentially
many-layered) virtual mapping on which we predicate a VFS.
Switch all input-based memory buffer reads in the Frontend to the new
FileSystem-based approach.
This can't arise from a clean build, but it can happen if you have
products lingering in a search path and then either rebuild one of
the modules in the cycle, or change the search paths.
The way this is implemented is for each module to track whether its
imports have all been resolved. If, when loading a module, one of its
dependencies hasn't resolved all of its imports yet, then we know
there's a cycle.
This doesn't produce the best diagnostics, but it's hard to get into
this state in the first place, so that's probably okay.
https://bugs.swift.org/browse/SR-7483
Before this patch, we have one flag (KeepSyntaxInfo) to turn on two syntax
functionalities of parser: (1) collecting parsed tokens for coloring and
(2) building syntax trees. Since sourcekitd is the only consumer of either of these
functionalities, sourcekitd by default always enables such flag.
However, empirical results show (2) is both heavier and less-frequently
needed than (1). Therefore, separating the flag to two flags makes more
sense, where CollectParsedToken controls (1) and BuildSyntaxTree
controls (2).
CollectingParsedToken is always enabled by sourcekitd because
formatting and syntax-coloring need it; however BuildSyntaxTree should
be explicitly switched on by sourcekitd clients.
resolves: rdar://problem/37483076
This patch allows Parser to generate a refined token stream to satisfy tooling's need. For syntax coloring, token stream from lexer is insufficient because (1) we have contextual keywords like get and set; (2) we may allow keywords to be used as argument labels and names; and (3) we need to split tokens like "==<". In this patch, these refinements are directly fulfilled through parsing without additional heuristics. The refined token vector is optionally saved in SourceFile instance.
A lot of files transitively include Expr.h, because it was
included from SILInstruction.h, SILLocation.h and SILDeclRef.h.
However in reality most of these files don't do anything
with Exprs, especially not anything in IRGen or the SILOptimizer.
Now we're down to 171 files in the frontend which depend on
Expr.h, which is still a lot but much better than before.
The typedef `swift::Module` was a temporary solution that allowed
`swift::Module` to be renamed to `swift::ModuleDecl` without requiring
every single callsite to be modified.
Modify all the callsites, and get rid of the typedef.
This reverts the contents of #5778 and replaces it with a far simpler
implementation of condition resolution along with canImport. When
combined with the optimizations in #6279 we get the best of both worlds
with a performance win and a simpler implementation.
* Pack the bits for IfConfigDecls into Decl
* Don't open symbols into a module when evaluating canImport statements
The module loaders now have API to check whether a given module can be
imported without importing the referenced module. This provides a
significant speed boost to condition resolution and no longer
introduces symbols from the referenced module into the current context
without the user explicitly requesting it.
The definition of ‘canImport’ does not necessarily mean that a full
import without error is possible, merely that the path to the import is
visible to the compiler and the module is loadable in some form or
another.
Note that this means this check is insufficient to guarantee that you
are on one platform or another. For those kinds of checks, use
‘os(OSNAME)’.
We want to distinguish the special case of a library built with
-sil-serialize-all, from a SIL function that is [fragile] because
of an explicitly @_transparent or @inline(__always).
For now, NFC.
Since resilience is a property of the module being compiled,
not decls being accessed, we need to record which types are
resilient as part of the module.
Previously we would only ever look at the @_fixed_layout
attribute on a type. If the flag was not specified, Sema
would slap this attribute on every type that gets validated.
This is wasteful for non-resilient builds, because there
all types get the attribute. It was also apparently wrong,
and I don't fully understand when Sema decides to validate
which decls.
It is much cleaner conceptually to just serialize this flag
with the module, and check for its presence if the
attribute was not found on a type.
Objective-C method unintended override checking is one such case where
properly checking unintended overrides requires us to essentially look
at the whole module, because one translation unit may declare
something that produces an Objective-C method "setFoo:" in a
superclass while another translation unit declares something with a
distinct name that produces an Objective-C method "setFoo:". So, when
we don't have a primary file (e.g., when we're doing the merge-module
step), delay such checks until after all the source files for the
module have been type-checked. When there is a primary file, we
perform the checking that we can based on type checking that primary
file (and whatever got touched along the way), so we get a subset of
the proper diagnostics.
Swift SVN r23179
We don't want typos in import statements to take down the whole REPL, but we
/do/ want the REPL to be honoring fatal errors that effectively take down the
ASTContext.
This doesn't (yet) apply to the real LLDB REPL, which does not use
SourceFileKind::REPL for its input. The right option to test there is
LangOpts.DebuggerSupport, but that's currently being set for Playgrounds as
well. I've filed <rdar://problem/18090611> for LLDB to adjust their input.
Part of <rdar://problem/17994094>
Swift SVN r21383
LLVM's system_error.h has been changed to forward to the standard
version of the same. Update usage for the minor API changes that this
entails.
Based in part on a patch by Justin Bogner.
Swift SVN r18832
This doesn't really affect anyone in real life, but it will catch cases
where someone's trying to compile for iOS without the iOS stdlib around.
Swift SVN r18796
This performs very conservative dependency generation for each compile task
within a full compilation. Any source file, swiftmodule, or Objective-C
header file that is /touched/ gets added to the dependencies list, which
is written out on a per-input basis at the end of compilation.
This does /not/ handle dependencies for the aggregated swiftmodule, swiftdoc,
generated header, or linked binary. This is just the minimum needed to get
Xcode to recognize what needs to be rebuilt when a header or Swift source
file changes. We can revisit this later.
This finishes <rdar://problem/14899639> for now.
Swift SVN r18045
