This means that:
1. SILGenPattern always borrows the object before it emits a case.
2. Any cast with this cast has a +0 result.
NOTE: That one can not use this with address types (so we assert if you
pass this checked_cast_addr_br).
NOTE: Once we have opaque values, checked_cast_br of a guaranteed value will
lower to a copy + checked_cast_addr_br (assuming the operation is a consuming
cast). To make sure this does not become a problem in terms of performance, we
will need a pass that can transform SILGenPattern +0 cases to +1 cases. This is
something that we have talked about in the past and I think it is reasonable to
implement.
This is an incremental commit towards fixing SILGenPattern for ownership.
rdar://29791263
SILWitnessTable::Entry already contains a superset of what was supported
by SILDefaultWitnessTable::Entry, the latter of which only had “no entry”
and “method” states. Make SILDefaultWitnessTable::Entry an alias for
SILWitnessTable::Entry, and unify all of the parsing/printing/
(de)serialization logic.
Lexer::getEncodedStringSegment (now getEncodedStringSegmentImpl)
assumes that it can read one byte past the end of a string segment in
order to avoid bounds-checks on things like "is this a \r\n
sequence?". However, the function was being used for strings that did
not come from source where this assumption was not always valid.
Change the reusable form of the function to always copy into a
temporary buffer, allowing the fast path to continue to be used for
normal parsing.
Caught by ASan!
rdar://problem/44306756
I changed all of the places that used end_borrow_argument to use end_borrow.
NOTE: I discovered in the process of this patch that we are not verifying
guaranteed block arguments completely. I disabled the tests here that show this
bad behavior and am going to re-enable them with more tests in a separate PR.
This has not been a problem since SILGen does not emit any such arguments as
guaranteed today. But once I do the SILGenPattern work this will change.
rdar://33440767
This does not eliminate the entrypoints on SILBuilder yet. I want to do this in
two parts so that it is functionally easier to disentangle changing the APIs
above SILBuilder and changing the underlying instruction itself.
rdar://33440767
getUnlabeledType() will no longer work once TypeBase::transform()
walks function parameters, since the callback will not be called
with the entire argument list as a single type anymore.
Most of this patch is just removing special cases for materializeForSet
or other fairly mechanical replacements. Unfortunately, the rest is
still a fairly big change, and not one that can be easily split apart
because of the quite reasonable reliance on metaprogramming throughout
the compiler. And, of course, there are a bunch of test updates that
have to be sync'ed with the actual change to code-generation.
This is SR-7134.
Make sure the implementation can handle a key path with zero components by removing inappropriate assumptions that the number of components is always non-empty. Identity key paths also need some special behavior:
- Appending an identity key path should be an identity operation for the other operand
- Identity key paths have a `MemoryLayout.offset(of:)` zero
- Identity key paths interop with KVC as key paths to `@"self"`
To be able to exercise and test this behavior, add a `Builtin.identityKeyPath()` function and `WritableKeyPath._identity` accessor in lieu of finalized syntax.
ConvertFunction and reabstraction thunks need this attribute. Otherwise,
there is no way to identify that withoutActuallyEscaping was used
to explicitly perform a conversion.
The destination of a [without_actually_escaping] conversion always has
an escaping function type. The source may have either an escaping or
@noescape function type. The conversion itself may be a nop, and there
is nothing distinctive about it. The thing that is special about these
conversions is that the source function type may have unboxed
captures. i.e. they have @inout_aliasable parameters. Exclusivity
requires that the compiler enforce a SIL data flow invariant that
nonescaping closures with unboxed captures can never be stored or
passed as an @escaping function argument. Adding this attribute allows
the compiler to enforce the invariant in general with an escape hatch
for withoutActuallyEscaping.
This allowed me to fold all of the weird direct calls to createFunction into a
singular createFunctionForForwardReference. This is the only API that is needed
by the SILParser so only providing that gives us a significantly cleaner API.
rdar://42301529
This commit does not modify those APIs or their usage. It just:
1. Moves the APIs onto SILFunctionBuilder and makes SILFunctionBuilder a friend
of SILModule.
2. Hides the APIs on SILModule so all users need to use SILFunctionBuilder to
create/destroy functions.
I am doing this in order to allow for adding/removing function notifications to
be enforced via the type system in the SILOptimizer. In the process of finishing
off CallerAnalysis for FSO, I discovered that we were not doing this everywhere
we need to. After considering various other options such as:
1. Verifying after all passes that the notifications were sent correctly and
asserting. Turned out to be expensive.
2. Putting a callback in SILModule. This would add an unnecessary virtual call.
I realized that by using a builder we can:
1. Enforce that users of SILFunctionBuilder can only construct composed function
builders by making the composed function builder's friends of
SILFunctionBuilder (notice I did not use the word subclass, I am talking
about a pure composition).
2. Refactor a huge amount of code in SILOpt/SILGen that involve function
creation onto a SILGenFunctionBuilder/SILOptFunctionBuilder struct. Many of
the SILFunction creation code in question are straight up copies of each
other with small variations. A builder would be a great way to simplify that
code.
3. Reduce the size of SILModule.cpp by 25% from ~30k -> ~23k making the whole
file easier to read.
NOTE: In this commit, I do not hide the constructor of SILFunctionBuilder since
I have not created the derived builder structs yet. Once I have created those in
a subsequent commit, I will hide that constructor.
rdar://42301529
print and parse as a stable hexadecimal form that isn't interpreted as UTF8.
One use case is in representing serialized protobuf strings (as in the
tensorflow branch: f7ed452eba/lib/SILOptimizer/Mandatory/TFPartition.cpp (L3875)).
The original work was done by @lattner and merged into the tensorflow
branch. This PR is to upstream those changes.
This is how we originally controlled whether or not we printed out ownership
annotations when we printed SIL. Since then, I have changed (a few months ago I
believe) the ownership model eliminator to know how to eliminate these
annotations from the SIL itself. So this hack can be removed.
As an additional benefit, this will let me rename -enable-sil-ownership to
-enable-sil-ownership-verifier. This will I hope eliminate confusion around this
option in the short term while I am preparing to work on semantic sil again.
rdar://42509812
For now, the accessors have been underscored as `_read` and `_modify`.
I'll prepare an evolution proposal for this feature which should allow
us to remove the underscores or, y'know, rename them to `purple` and
`lettuce`.
`_read` accessors do not make any effort yet to avoid copying the
value being yielded. I'll work on it in follow-up patches.
Opaque accesses to properties and subscripts defined with `_modify`
accessors will use an inefficient `materializeForSet` pattern that
materializes the value to a temporary instead of accessing it in-place.
That will be fixed by migrating to `modify` over `materializeForSet`,
which is next up after the `read` optimizations.
SIL ownership verification doesn't pass yet for the test cases here
because of a general fault in SILGen where borrows can outlive their
borrowed value due to being cleaned up on the general cleanup stack
when the borrowed value is cleaned up on the formal-access stack.
Michael, Andy, and I discussed various ways to fix this, but it seems
clear to me that it's not in any way specific to coroutine accesses.
rdar://35399664
The other side of #17404. Since we don't want to generate up front key path metadata for properties/subscripts with no withheld implementation details, the client should generate a key path component that can be used to represent a key path component based on its public interface.
The storage kind has been replaced with three separate "impl kinds",
one for each of the basic access kinds (read, write, and read/write).
This makes it far easier to mix-and-match implementations of different
accessors, as well as subtleties like implementing both a setter
and an independent read/write operation.
AccessStrategy has become a bit more explicit about how exactly the
access should be implemented. For example, the accessor-based kinds
now carry the exact accessor intended to be used. Also, I've shifted
responsibilities slightly between AccessStrategy and AccessSemantics
so that AccessSemantics::Ordinary can be used except in the sorts of
semantic-bypasses that accessor synthesis wants. This requires
knowing the correct DC of the access when computing the access strategy;
the upshot is that SILGenFunction now needs a DC.
Accessor synthesis has been reworked so that only the declarations are
built immediately; body synthesis can be safely delayed out of the main
decl-checking path. This caused a large number of ramifications,
especially for lazy properties, and greatly inflated the size of this
patch. That is... really regrettable. The impetus for changing this
was necessity: I needed to rework accessor synthesis to end its reliance
on distinctions like Stored vs. StoredWithTrivialAccessors, and those
fixes were exposing serious re-entrancy problems, and fixing that... well.
Breaking the fixes apart at this point would be a serious endeavor.
* SILModule::isVisibleExternally utility for VarDecls.
* Fix the SIL parser so it doesn't drop global variable decls.
This information was getting lost in SIL printing/parsing.
Some passes rely on it. Regardless of whether passes should rely on it,
it is totally unacceptable for the SIL passes to have subtle differences
in behavior depending on the frontend mode. So, if we don't want passes
to rely on global variable decls, that needs to be enforced by the API
independent of how the frontend is invoked or how SIL is serialized.
* Use custom DemangleOptions to lookup global variable identifiers.
The "subclass scope" is meant to represent a connection to a vtable (and how
public something needs to be), for things that end up in class
vtables. Specializations and thunks are mostly internal implementation details
and do not end up there, so subclass scope is not applicable to them. This stops
the thunks and specializations being incorrectly public.
(Note, there are some thunks that _are_ public facing: if a function has its
signature optimized, the original entry point becomes a thunk, and this entry
point is what ends up in vtables etc., so needs to remain around, which means
keeping the same hacks for `private` members of an `open` class.)
Fixes rdar://problem/40738913.
Client code can make a best effort at emitting a key path referencing a property with its publicly exposed API, which in the common case will match what the defining module would produce as the canonical key path component representation of the declaration. We can reduce the code size impact of these descriptors by not emitting them when there's no hidden or possibly-resiliently-changed-in-the-past information about a storage declaration, having the property descriptor symbol reference a sentinel value telling client key paths to use their definition of the key path component.
Introduce some metaprogramming of accessors and generally prepare
for storing less-structured accessor lists.
NFC except for a change to the serialization format.
* [Parse] Minor fix for parsing SIL BuiltinInst.
The expected token in the diagnostic should be ")", not "(".
* [Parse] Add test for SIL BuiltinInst parse error.
* [Coverage] Parse SIL coverage maps for top-level code decls
This adds SIL printer/parser support for SILCoverageMaps representing
top-level code decls.
* [Coverage] Test lowering of ill-formed SIL profiling intrinsics
This adds a test case to exercise a path in IRGen which discards
ill-formed profiling intrinsics.
rdar://40133800 & r://39146527
Introduced during the bring-up of the generics system in July, 2012,
Substitution (and SubstitutionList) has been completely superseded by
SubstitutionMap. R.I.P.
SIL printing and parsing was based on printing substitution lists.
Change that to instead print/parse based on the replacement types
in substitution maps, which fits more closely with the rest of the
system.
This commit is papering over an issue where the substitution maps
generated for the “apply” of a partial specialization use an
ever-so-slightly different generic signature than partial
specialization itself. The TODO in the SIL printer for covers that
case.
This flag supports promoting KeyPath access violations to an error in
Swift 4+, while building the standard library in Swift 3 mode. This is
only necessary as long as the standard library continues to build in
Swift 3 mode. Once the standard library build migrates, it can all be
ripped out.
<rdar://problem/40115738> [Exclusivity] Enforce Keypath access as an error, not a warning in 4.2.
