Instead of checking that the stdlib can be loaded in a variety of places, check it when setting up the compiler instance. This required a couple more checks to avoid loading the stdlib in cases where it’s not needed.
To be able to differentiate stdlib loading failures from other setup errors, make `CompilerInstance::setup` return an error message on failure via an inout parameter. Consume that error on the call side, replacing a previous, more generic error message, adding error handling where appropriate or ignoring the error message, depending on the context.
In order to avoid accidentally implicitly loading modules that are expected but were not provided as explicit inputs.
- Use either SerializedModuleLoader or ExplicitSwiftModuleLoader for loading of partial modules, depending on whether we are in Explicit Module Build or Implicit Module Build mode.
Rather than adding a ModuleFile to a parent module
and then removing it afterwards if it fails to
load, let's wait until we've loaded the file before
deciding to add it to the parent module. This then
allows us to get rid of `ModuleDecl::removeFile`.
In addition, push down the calls to `addFile` into
the callers of `loadAST` in preparation for
`addFile` being replaced with a one-time-only call
to a `setFiles` method.
Replace it with the "legacy semantic queries" bit. The remaining client
of this bit is SourceKit, which appears to require this bit be set
conditionally so certain semantic property wrapper requests return
a sentinel value.
We should migrate these requests to a syntactic interface as soon as
possible.
rdar://60516325
✔ More informative error messages in case of crashes.
✔ Handling and documenting different cases.
✔ Test cases for different cases.
✔ Make SDKDependencies.swift pass again.
After setting up the .swiftsourceinfo file, this patch starts to actually serialize
and de-serialize source locations for declaration. The binary format of .swiftsourceinfo
currently contains these three records:
BasicDeclLocs: a hash table mapping from a USR ID to a list of basic source locations. The USR id
could be retrieved from the following DeclUSRs record using an actual decl USR. The basic source locations
include a file ID and the results from Decl::getLoc(), ValueDecl::getNameLoc(), Decl::getStartLoc() and Decl::getEndLoc().
The file ID could be used to retrieve the actual file name from the following SourceFilePaths record.
Each location is encoded as a line:column pair.
DeclUSRS: a hash table mapping from USR to a USR ID used by location records.
SourceFilePaths: a hash table mapping from a file ID to actual file name.
BasicDeclLocs should be sufficient for most diagnostic cases. If additional source locations
are needed, we could always add new source location records without breaking the backward compatibility.
When de-serializing the source location from a module-imported decl, we calculate its USR, retrieve the USR ID
from the DeclUSRS record, and use the USR ID to look up the basic location list in the BasicDeclLocs record.
For more details about .swiftsourceinfo file: https://forums.swift.org/t/proposal-emitting-source-information-file-during-compilation
This has been an unnecessary code path for a long time now and should be removed particularly because it triggers wasteful `stat` calls.
rdar://51523161
When we build incrementally, we produce "partial swiftmodules" for
each input source file, then merge them together into the final
compiled module that, among other things, gets used for debugging.
Without this, we'd drop @_implementationOnly imports and any types
from the modules that were imported during the module-merging step
and then be unable to debug those types
Members of an @objcMembers context previous had implicit @objc attributes, but
now don't (possibly because of the request evaluator changes?). This updates the
output of sourcekitd's 'index' request to act as if they still had implicit
@objc attributes on them for compatibility.
Resolves rdar://problem/48140265
It is possible for the SIL optimizers, IRGen, etc. to request information
from the AST that only the type checker can provide, but the type checker
is typically torn down after the “type checking” phase. This can lead to
various crashes late in the compilation cycle.
Keep the type checker instance around as long as the ASTContext is alive
or until someone asks for it to be destroyed.
Fixes SR-285 / rdar://problem/23677338.
Addressing review feedback: this avoids calling shared_from_this() from
outside the implementation. Note: it is not possible to use private
inheritance of enable_shared_from_this to prevent this issue in general,
because enabled_shared_from_this relies on the shared_ptr constructor
being able to detect that the type has this inheritance, which means it
must be public.
This can't arise from a clean build, but it can happen if you have
products lingering in a search path and then either rebuild one of
the modules in the cycle, or change the search paths.
The way this is implemented is for each module to track whether its
imports have all been resolved. If, when loading a module, one of its
dependencies hasn't resolved all of its imports yet, then we know
there's a cycle.
This doesn't produce the best diagnostics, but it's hard to get into
this state in the first place, so that's probably okay.
https://bugs.swift.org/browse/SR-7483
... instead of an array of compiler arguments. This is good enough
for seeing what's going on, and it saves significant time for long
argument strings, because it doesn't create and destroy so many
xpc strings, and more of the string copying that happens is on a large
contiguous string instead of many small strings.
rdar://39538847
This code was an experiment in how to collect information after a crash,
that did not end up being used. It's unclear how much it has bitrotted
at this point, since it has no tests and was not designed with automated
testing in mind. Parts of it interfere with some changes I want to make
to the underlying tracing mechanism, so I am finally removing it. This
also lets us remove the buffer copying in the parts of tracing used by
the compile notifications, improving performance.
For rdar://39538847
When enabled, send a notification before/after every "compilation",
which for now means `performSema`. This piggy-backs and modifies some
existing code that we had for "tracing" operations in sourcekitd that
unfortunately was untested. At least now some of the basic parts are
tested via the new notifications.
Part of rdar://38438512
This is how it was used in all but one place anyway, and makes it easier
to understand. It also aligns better with some further refactoring I
want to do...
Stop parsing frontend arguments directly and use the driver instead. The
most intersting part of this change is that it forces us to consider
whether our compiler invocation will have inputs or not. We have
several kinds of requests that need to create a compiler instance, but
not parse any inputs (interface-generation, doc-info, and indexing when
operating on a module instead of source files).
Incidentally, add an error when trying to do doc-info on multiple source
files. This was already very broken (assertion failures and bogus source
locations), so add an error for it.
rdar://problem/17897287
- Outlaw duplicate input files, fix driver, fix tests, and add test.
- Reflect that no buffer is present without a (possibly pseudo) named file.
- Reflect fact that every input has a (possible pseudo) name.
- Break up CompilerInstance::setup.
Don't bail on dups.
Change “have” routines to “has”.
Use more consistent casing.
Remove spurious “DelayedFunctionParsing” option.
Move debugFail routines to top lexical level.
Rename and reorder declaration of functions in FrontendArgsToOptionsConverter.
Move, reword, and doxygenate comments for some of those functions.
Fix casing on some more setUp* functions.
Return NoneAction instead of existing RequestedAction in FrontendArgsToOptionsConverter::determineRequestedAction.
Remove test names and put in FIXME’s.
Remove “Jordan” from comments & reword.
Reorder if-then arms of FrontendArgsToOptionsConverter::computeOutputFilenames for readability.
Test for empty string instead of equality with “”.
Use hasUnusedModuleDocOutputPath.
Remove optionality from return type of getOutputFilenamesFromCommandLineOrFilelist.
Rename isPrimaryInputAFileAt to isThereAPrimaryInputWithAFilenameAt.
Added a FIXME in doesActionProduceOutput to reflect that some actions actually do not produce output.
Change “have” routines to “has”.
Use more consistent casing.
Remove spurious “DelayedFunctionParsing” option.
Move debugFail routines to top lexical level.
Rename and reorder declaration of functions in FrontendArgsToOptionsConverter.
Move, reword, and doxygenate comments for some of those functions.
Fix casing on some more setUp* functions.
Return NoneAction instead of existing RequestedAction in FrontendArgsToOptionsConverter::determineRequestedAction.
Remove test names and put in FIXME’s.
Remove “Jordan” from comments & reword.
Reorder if-then arms of FrontendArgsToOptionsConverter::computeOutputFilenames for readability.
Test for empty string instead of equality with “”.
Use hasUnusedModuleDocOutputPath.
Remove optionality from return type of getOutputFilenamesFromCommandLineOrFilelist.
Rename isPrimaryInputAFileAt to isThereAPrimaryInputWithAFilenameAt.
Added a FIXME in doesActionProduceOutput to reflect that some actions actually do not produce output.
Encapsulate uses of the variables in FrontendInputs with intention-describing functions. Move some code that sets these variables into FrontendInputs and FrontendOptions classes.
Create new FrontendInputs class to encapsulate InputFilenames, InputBuffers and PrimaryInput, which were formerly in Frontend.
Includes one change in SwiftEditor.cpp to resolve a merge conflict.
The typedef `swift::Module` was a temporary solution that allowed
`swift::Module` to be renamed to `swift::ModuleDecl` without requiring
every single callsite to be modified.
Modify all the callsites, and get rid of the typedef.
The errors won't be captured in the response, and it can be expensive to
do typo-correction when there are many errors, which is common in
indexing.
rdar://problem/28963058
