We now schedule conformance emissions in basically the same way
we do for types and declarations, which means that we'll emit them
uniquely in the module file instead of redundantly at every use.
This should produce substantially smaller module files overall,
especially for modules that heavily use generics. It also means
that we can remove all the unfortunate code to support using
different abbrev codes for them in different bitcode blocks.
Requirement lists are now emitted inline in the records that need
them instead of as trailing records. I think this will improve
space usage, but mostly it assists in eliminating the problem
where abbrev codes are shared between blocks.
The main effect of this will be that in IRGen we will use llvm.dbg.addr instead
of llvm.dbg.declare. We must do this since llvm.dbg.declare implies that the
given address is valid throughout the program.
This just adds the instructions/printing/parsing/serialization/deserialization.
rdar://85020571
This is an instruction that I am going to use to drive some of the ownership
based dataflow optimizations that I am writing now. The instruction contains a
kind that allows one to know what type of checking is required and allows the
need to add a bunch of independent instructions for independent checkers. Each
checker is responsible for removing all of its own mark instructions. NOTE:
MarkMustCheckInst is only allowed in Raw SIL since once we are in Canonical SIL
we want to ensure that all such checking has already occurred.
Store a list of argument effects in a function, which specify if and how arguments escape.
Such effects can be specified in the Swift source code (for details see docs/ReferenceGuides/UnderscoredAttributes.md) or derived in an optimization pass.
For details see the documentation in SwiftCompilerSources/Sources/SIL/Effects.swift.
The new flag will be used to track whether a move_value corresponds to a
source-level lexical scope. Here, the flag is just added to the
instruction and represented in textual and serialized SIL.
Introduce a new instruction `dealloc_stack_ref ` and remove the `stack` flag from `dealloc_ref`.
The `dealloc_ref [stack]` was confusing, because all it does is to mark the deallocation of the stack space for a stack promoted object.
This instruction is similar to a copy_addr except that it marks a move of an
address that has to be checked. In order to keep the memory lifetime verifier
happy, the semantics before the checker runs are the mark_unresolved_move_addr is
equivalent to copy_addr [init] (not copy_addr [take][init]).
The use of this instruction is that Mandatory Inlining converts builtin "move"
to a mark_unresolved_move_addr when inlining the function "_move" (the only
place said builtin is invoked).
This is then run through a special checker (that is later in this PR) that
either proves that the mark_unresolved_move_addr can actually be a move in which
case it converts it to copy_addr [take][init] or if it can not be a move, emit
an error and convert the instruction to a copy_addr [init]. After this is done
for all instructions, we loop back through again and emit an error on any
mark_unresolved_move_addr that were not processed earlier allowing for us to
know that we have completeness.
NOTE: The move kills checker for addresses is going to run after Mandatory
Inlining, but before predictable memory opts and friends.
Required for UnsafeRawPointer.withMemoryReboud(to:).
%out_token = rebind_memory %0 : $Builtin.RawPointer to %in_token
%0 must be of $Builtin.RawPointer type
%in_token represents a cached set of bound types from a prior memory state.
%out_token is an opaque $Builtin.Word representing the previously bound
types for this memory region.
This instruction's semantics are identical to ``bind_memory``, except
that the types to which memory will be bound, and the extent of the
memory region is unknown at compile time. Instead, the bound-types are
represented by a token that was produced by a prior memory binding
operation. ``%in_token`` must be the result of bind_memory or
This is a signal to the move value kill analysis that this is a move that should
have diagnostics emitted for it. It is a temporary addition until we add
MoveOnly to the SIL type system.
I am purposely doing this in SILGen rather than at the type system level to
avoid having to have to add a bunch of boilerplate to the type system. Instead
of doing that, I am in SILGen checking for the isNoImplicitCopy bit on the
ParamDecl when we emit arguments. At that point, I set on the specific
SILArgument being emitted the bit that it is no implicit copy. In terms of
printing at the SIL level, I just printed it in front of the function argument
type like @owned, e.x.:
func myFunc(_ x: @_noImplicitCopy T) -> T {
...
}
becomes:
bb0(%0 : @noImplicitCopy @owned $T):
Some notes:
* Just to be explicit, I am making it so that no implicit copy parameters by
default are always passed at +1. The reason why I think this makes sense is
that this is the natural way of working with a move only value.
* As always, one can not write no implicit copy the attribute without passing
the flag -enable-experimental-move-only so this is NFC.
rdar://83957088
The key thing is that the move checker will not consider the explicit copy value
to be a copy_value that can be rewritten, ensuring that any uses of the result
of the explicit copy_value (consuming or other wise) are not checked.
Similar to the _move operator I recently introduced, this is a transparent
function so we can perform one level of specialization and thus at least be
generic over all concrete types.
This was a relict from the -sil-serialize-all days. This linkage doesn't make any sense because a private function cannot be referenced from another module (or file, in case of non-wmo compilation).
Changed the frontend flag to -enable-experimental-lexical-lifetimes from
-enable-experimental-defined-lifetimes.
Changed the attribute on begin_borrow from [defined] to [lexical].
The new flag will be used to track whether a borrow scope corresponds to
a source-level lexical scope. Here, the flag is just documented, added
to the instruction, represented in textual and serialized SIL, and
cloned.
Support for addresses with arbitrary alignment as opposed to their
element type's natural in-memory alignment.
Required for bytestream encoding/decoding without resorting to memcpy.
SIL instruction flag, documentation, printing, parsing, serialization,
and IRGen.
This is a new instruction that can be used by SILGen to perform a semantic move
in between two entities that are considered separate variables at the AST
level. I am going to use it to implement an experimental borrow checker.
This PR contains the following:
1. I define move_value, setup parsing, printing, serializing, deserializing,
cloning, and filled in all of the visitors as appropriate.
2. I added createMoveValue and emitMoveValueOperation SILBuilder
APIs. createMoveValue always creates a move and asserts is passed a trivial
type. emitMoveValueOperation in contrast, will short circuit if passed a
trivial value and just return the trivial value.
3. I added IRGen tests to show that we can push this through the entire system.
This is all just scaffolding for the instruction to live in SIL land and as of
this PR doesn't actually do anything.
It's not sufficient to first serialize all functions and then serialize all globals, because a function can be referenced from the initializer expression of a global.
Therefore the worklist processing must include both, functions and globals.
This fixes a crash in the serializer, which is exposed through cross-module-optimization.
https://bugs.swift.org/browse/SR-15162
rdar://82827256
The new flag will be used to track whether a borrow scope corresponds to
a source-level lexical scope. Here, the flag is just added to the
instruction and represented in textual and serialized SIL.
Start treating the null {Can}GenericSignature as a regular signature
with no requirements and no parameters. This not only makes for a much
safer abstraction, but allows us to simplify a lot of the clients of
GenericSignature that would previously have to check for null before
using the abstraction.
The toString has been updated so that it doesn't return a std::string
anymore. Instead, you have to pass the memory buffer in. This patch
cleans that up.
SILGen this builtin to a mandatory hop_to_executor with an actor type
operand.
e.g.
Task.detached {
Builtin.hopToActor(MainActor.shared)
await suspend()
}
Required to fix a bug in _runAsyncMain.
Through various means, it is possible for a synchronous actor-isolated
function to escape to another concurrency domain and be called from
outside the actor. The problem existed previously, but has become far
easier to trigger now that `@escaping` closures and local functions
can be actor-isolated.
Introduce runtime detection of such data races, where a synchronous
actor-isolated function ends up being called from the wrong executor.
Do this by emitting an executor check in actor-isolated synchronous
functions, where we query the executor in thread-local storage and
ensure that it is what we expect. If it isn't, the runtime complains.
The runtime's complaints can be controlled with the environment
variable `SWIFT_UNEXPECTED_EXECUTOR_LOG_LEVEL`:
0 - disable checking
1 - warn when a data race is detected
2 - error and abort when a data race is detected
At an implementation level, this introduces a new concurrency runtime
entry point `_checkExpectedExecutor` that checks the given executor
(on which the function should always have been called) against the
executor on which is called (which is in thread-local storage). There
is a special carve-out here for `@MainActor` code, where we check
against the OS's notion of "main thread" as well, so that `@MainActor`
code can be called via (e.g.) the Dispatch library's
`DispatchQueue.main.async`.
The new SIL instruction `extract_executor` performs the lowering of an
actor down to its executor, which is implicit in the `hop_to_executor`
instruction. Extend the LowerHopToExecutor pass to perform said
lowering.
Refactor SILGen's ApplyOptions into an OptionSet, add a
DoesNotAwait flag to go with DoesNotThrow, and sink it
all down into SILInstruction.h.
Then, replace the isNonThrowing() flag in ApplyInst and
BeginApplyInst with getApplyOptions(), and plumb it
through to TryApplyInst as well.
Set the flag when SILGen emits a sync call to a reasync
function.
When set, this disables the SIL verifier check against
calling async functions from sync functions.
Finally, this allows us to add end-to-end tests for
rdar://problem/71098795.
