When serializing `@available` attributes, if the attribute applies to a custom
domain include enough information to deserialize the reference to that domain.
Resolves rdar://138441265.
When performing a dynamic cast to an existential type that satisfies
(Metatype)Sendable, it is unsafe to allow isolated conformances of any
kind to satisfy protocol requirements for the existential. Identify
these cases and mark the corresponding cast instructions with a new flag,
`[prohibit_isolated_conformances]` that will be used to indicate to the
runtime that isolated conformances need to be rejected.
The module name changes the symbol mangling, and also causes
TBDGen to emit linker directives. To separate out these two
behaviors, introduce a terrible hack. If the module name
contains a semicolon (`;`), the part before the semicolon
is the module name for mangling, and the part after the
semicolon is the module name for linker directives.
If there is no semicolon, both module names are identical,
and the behavior is the same as before.
An "abstract" ProtocolConformanceRef is a conformance of a type
parameter or archetype to a given protocol. Previously, we would only
store the protocol requirement itself---but not track the actual
conforming type, requiring clients of ProtocolConformanceRef to keep
track of this information separately.
Record the conforming type as part of an abstract ProtocolConformanceRef,
so that clients will be able to recover it later. This is handled by a uniqued
AbstractConformance structure, so that ProtocolConformanceRef itself stays one
pointer.
There remain a small number of places where we create an abstract
ProtocolConformanceRef with a null type. We'll want to chip away at
those and establish some stronger invariants on the abstract conformance
in the future.
* [CS] Decline to handle InlineArray in shrink
Previously we would try the contextual type `(<int>, <element>)`,
which is wrong. Given we want to eliminate shrink, let's just bail.
* [Sema] Sink `ValueMatchVisitor` into `applyUnboundGenericArguments`
Make sure it's called for sugar code paths too. Also let's just always
run it since it should be a pretty cheap check.
* [Sema] Diagnose passing integer to non-integer type parameter
This was previously missed, though would have been diagnosed later
as a requirement failure.
* [Parse] Split up `canParseType`
While here, address the FIXME in `canParseTypeSimpleOrComposition`
and only check to see if we can parse a type-simple, including
`each`, `some`, and `any` for better recovery.
* Introduce type sugar for InlineArray
Parse e.g `[3 x Int]` as type sugar for InlineArray. Gated behind
an experimental feature flag for now.
The Protocol field isn't really necessary, because the conformance
stores the protocol. But we do need the substituted subject type
of the requirement, just temporarily, until an abstract conformance
stores its own subject type too.
Instead of using the `isolated P` syntax, switch to specifying the
global actor type directly, e.g.,
class MyClass: @MainActor MyProto { ... }
No functionality change at this point
To pave the way for the new experimental feature which will operate on '@const' attribute and expand the scope of what's currently handled by '_const' without breaking compatibility, for now.
When `ExtensibleEnums` flag is set, it's going to be reflected in
the module file produced by the compiler to make sure that consumers
know that non-`@frozen` enumerations can gain new cases in the
future and switching cannot be exhaustive.
This patch adds support for serialization of debug value instructions. Enablement is currently gated behind the -experimental-serialize-debug-info flag.
Previously, debug_value instructions were lost during serialization. This made it harder to debug cross module inlined functions.
Map the lifetime dependencies described in terms of the formal AST-level parameters
to the correct parameter(s) in the lowered SIL function type. There can be 0, 1,
or many SIL parameters per formal parameter because of tuple exploding. Also,
record which dependencies are on addressable parameters (meaning that the dependency
includes not only the value of the parameter, but its specific memory location).
This would make sure that async function types marked as `@execution(caller)`
have correct isolation.
Also defines all of the possible conversions to and from `caller`
isolated function types.
The problem with `is_escaping_closure` was that it didn't consume its operand and therefore reference count checks were unreliable.
For example, copy-propagation could break it.
As this instruction was always used together with an immediately following `destroy_value` of the closure, it makes sense to combine both into a `destroy_not_escaped_closure`.
It
1. checks the reference count and returns true if it is 1
2. consumes and destroys the operand
This is used for synthetic uses like _ = x that do not act as a true use but
instead only suppress unused variable warnings. This patch just adds the
instruction.
Eventually, we can use it to move the unused variable warning from Sema to SIL
slimmming the type checker down a little bit... but for now I am using it so
that other diagnostic passes can have a SIL instruction (with SIL location) so
that we can emit diagnostics on code like _ = x. Today we just do not emit
anything at all for that case so a diagnostic SIL pass would not see any
instruction that it could emit a diagnostic upon. In the next patch of this
series, I am going to add SILGen support to do that.
This attribute makes it so that a parameter of the annotated type, as well as
any type structurally containing that type as a field, becomes passed as
if `@_addressable` if the return value of the function has a dependency on
the parameter. This allows nonescapable values to take interior pointers into
such types.
Right now it is basically a version of nonisolated beyond a few simple cases
like constructors/destructors where we are pretty sure we want to not support
this.
This is part of my bringup strategy for changing nonisolated/unspecified to be
caller isolation inheriting.
I need this today to add the implicit isolated parameter... but I can imagine us
adding more implicit parameters in the future, so it makes sense to formalize it
so it is easier to do in the future.
Extend the module trace format with a field indicating whether a given
module, or any module it depends on, was compiled with strict memory
safety enabled. This separate output from the compiler can be used as
part of an audit to determine what parts of Swift programs are built
with strict memory safety checking enabled.
Protocol conformances have a handful attributes that can apply to them
directly, including @unchecked (for Sendable), @preconcurrency, and
@retroactive. Generalize this into an option set that we carry around,
so it's a bit easier to add them, as well as reworking the
serialization logic to deal with an arbitrary number of such options.
Use this generality to add support for @unsafe conformances, which are
needed when unsafe witnesses are used to conform to safe requirements.
Implement general support for @unsafe conformances, including
producing a single diagnostic per missing @unsafe that provides a
Fix-It and collects together all of the unsafe witnesses as notes.
This attribute will allow you to specify an alternate version of the declaration used for mangling. It will allow minor adjustments to be made to declarations so long as they’re still compatible at the calling convention level, such as refining isolation or sendability, renaming without breaking ABI, etc.
The attribute is behind the experimental feature flag `ABIAttribute`.
Introduce an attribute to allow unsafe code within the annotated
declaration without presenting an unsafe interface to users. This is,
by its nature, and unsafe construct, and is used to document where
unsafe behavior is encapsulated in safe constructs.
There is an optional message that can be used as part of an audit
trail.
When serializing the module interface path of an interface that
is part of the SDK, we serialize relative to the SDK path. During
deserialization we need to know if a path was serialized relative
to the SDK or not. The existing logic assumes any relative path
has been serialized relative to the SDK, which makes it impossible
to compile modules from relative swiftinterface paths that are not
part of the SDK.
Update the swiftmodule file to include an attribute to show if the
path was serialized relative to the SDK or not, which is used
during deserialization to correctly reconstruct the interface path.
Many APIs using nonescapable types would like to vend interior pointers to their
parameter bindings, but this isn't normally always possible because of representation
changes the caller may do around the call, such as moving the value in or out of memory,
bridging or reabstracting it, etc. `@_addressable` forces the corresponding parameter
to be passed indirectly in memory, in its maximally-abstracted representation.
[TODO] If return values have a lifetime dependency on this parameter, the caller must
keep this in-memory representation alive for the duration of the dependent value's
lifetime.
Rename decls are typically derived from the rename strings attached to a
`@available` attributes. It shouldn't be necessary to serialize the cached
rename decls since they can be rederived. The only decls that have rename decls
and don't have reanme strings are synthesized by ClangImporter and don't get
serialized.
