With this change, you will no longer receive
"error when parsing the compiler arguments". Instead, you will
receive the underlying error, like
"error: unable to load output file map 'output_file_map.json': No such file or directory"
It is possible for the SIL optimizers, IRGen, etc. to request information
from the AST that only the type checker can provide, but the type checker
is typically torn down after the “type checking” phase. This can lead to
various crashes late in the compilation cycle.
Keep the type checker instance around as long as the ASTContext is alive
or until someone asks for it to be destroyed.
Fixes SR-285 / rdar://problem/23677338.
When the server shuts down we may still have outstanding async work to
build an AST, so use a shared_ptr + weak_ptr instead of unique_ptr +
unowned references.
But not even that much uglier; at all three call sites this will save
an allocation, and for the most important one (SourceKit) we can now
avoid creating a temporary CompilerInvocation just to copy into a
longer-lived one.
With this change, Driver no longer depends on Frontend, which means...
well, slightly faster builds of the compiler itself, but not much
else.
Disable the sanitizers and code coverage when building a swift
invocation for the purpose of collecting diagnostics.
This should speed up diagnostic generation and reduce exposure to
compiler bugs.
rdar://40955900
When adding to the AST consumer queue, keep track of the snapshots
expected and only run such AST consumers when a new enough AST is built.
Progress is ensured because we always run the AST consumer that
triggered the build.
This prevents cases where enqueuing a consumer during an AST build has
different behaviour than enqueuing it after the AST has finished.
rdar://40340631
Refactors the diagnostic code to be run whenever a compilation
notification has been started and there are diagnostics available in the
consumer. This allows us to capture diagnostics on all exit paths, and
specifically when code-completion fails because of invalid arguments.
Note: the editor.open code path still doesn't report invalid arguments
because it fails before even trying to create an AST.
... instead of overriding it after the driver is done. This improves
the fidelity of anything that looks at the resource directory inside the
driver or frontend argument parsing. In particular, it fixes an issue
where sourcekit requests would fail if they included the -sanitize=
option because the driver would fail to find the runtime libraries.
Even though this should be *more correct* for all uses, in the
interests of understanding all possible immediate effects of this
change, I manually audited all the code that looks at the resource
directory in between when it is parsed as and argument and when
createCompilerInvocation returns. I claim that the only changes are:
1. The sanitizer library check that we wanted to change
2. The DWARFDebugFlags, which are for IRGen so don't affect SourceKit
3. The Migrator data paths, which also don't affect SourceKit
For now, I put the -resource-dir option at the end of the arguments so
that it overrides any existing option, which mimics how it behaved
before. We might want to move it to the beginning so that we honour a
user-provided resource directory, but that should be a separate change.
rdar://40147839
... instead of an array of compiler arguments. This is good enough
for seeing what's going on, and it saves significant time for long
argument strings, because it doesn't create and destroy so many
xpc strings, and more of the string copying that happens is on a large
contiguous string instead of many small strings.
rdar://39538847
This code was an experiment in how to collect information after a crash,
that did not end up being used. It's unclear how much it has bitrotted
at this point, since it has no tests and was not designed with automated
testing in mind. Parts of it interfere with some changes I want to make
to the underlying tracing mechanism, so I am finally removing it. This
also lets us remove the buffer copying in the parts of tracing used by
the compile notifications, improving performance.
For rdar://39538847
When enabled, send a notification before/after every "compilation",
which for now means `performSema`. This piggy-backs and modifies some
existing code that we had for "tracing" operations in sourcekitd that
unfortunately was untested. At least now some of the basic parts are
tested via the new notifications.
Part of rdar://38438512
This is how it was used in all but one place anyway, and makes it easier
to understand. It also aligns better with some further refactoring I
want to do...
SourceKit doesn't use them and if any unrecognised LLVM options are
passed to llvm::cl::ParseCommandLineOptions() it calls exit(), bringing
down SourceKit.
Also use fprintf instead of llvm::errs() in Logging.cpp as it uses a
global C++ object that had already been destructed when logging the
above failure.
Resolves rdar://problem/38314383
Before this patch, we have one flag (KeepSyntaxInfo) to turn on two syntax
functionalities of parser: (1) collecting parsed tokens for coloring and
(2) building syntax trees. Since sourcekitd is the only consumer of either of these
functionalities, sourcekitd by default always enables such flag.
However, empirical results show (2) is both heavier and less-frequently
needed than (1). Therefore, separating the flag to two flags makes more
sense, where CollectParsedToken controls (1) and BuildSyntaxTree
controls (2).
CollectingParsedToken is always enabled by sourcekitd because
formatting and syntax-coloring need it; however BuildSyntaxTree should
be explicitly switched on by sourcekitd clients.
resolves: rdar://problem/37483076
Stop parsing frontend arguments directly and use the driver instead. The
most intersting part of this change is that it forces us to consider
whether our compiler invocation will have inputs or not. We have
several kinds of requests that need to create a compiler instance, but
not parse any inputs (interface-generation, doc-info, and indexing when
operating on a module instead of source files).
Incidentally, add an error when trying to do doc-info on multiple source
files. This was already very broken (assertion failures and bogus source
locations), so add an error for it.
rdar://problem/17897287
- Outlaw duplicate input files, fix driver, fix tests, and add test.
- Reflect that no buffer is present without a (possibly pseudo) named file.
- Reflect fact that every input has a (possible pseudo) name.
- Break up CompilerInstance::setup.
Don't bail on dups.
Change “have” routines to “has”.
Use more consistent casing.
Remove spurious “DelayedFunctionParsing” option.
Move debugFail routines to top lexical level.
Rename and reorder declaration of functions in FrontendArgsToOptionsConverter.
Move, reword, and doxygenate comments for some of those functions.
Fix casing on some more setUp* functions.
Return NoneAction instead of existing RequestedAction in FrontendArgsToOptionsConverter::determineRequestedAction.
Remove test names and put in FIXME’s.
Remove “Jordan” from comments & reword.
Reorder if-then arms of FrontendArgsToOptionsConverter::computeOutputFilenames for readability.
Test for empty string instead of equality with “”.
Use hasUnusedModuleDocOutputPath.
Remove optionality from return type of getOutputFilenamesFromCommandLineOrFilelist.
Rename isPrimaryInputAFileAt to isThereAPrimaryInputWithAFilenameAt.
Added a FIXME in doesActionProduceOutput to reflect that some actions actually do not produce output.
Change “have” routines to “has”.
Use more consistent casing.
Remove spurious “DelayedFunctionParsing” option.
Move debugFail routines to top lexical level.
Rename and reorder declaration of functions in FrontendArgsToOptionsConverter.
Move, reword, and doxygenate comments for some of those functions.
Fix casing on some more setUp* functions.
Return NoneAction instead of existing RequestedAction in FrontendArgsToOptionsConverter::determineRequestedAction.
Remove test names and put in FIXME’s.
Remove “Jordan” from comments & reword.
Reorder if-then arms of FrontendArgsToOptionsConverter::computeOutputFilenames for readability.
Test for empty string instead of equality with “”.
Use hasUnusedModuleDocOutputPath.
Remove optionality from return type of getOutputFilenamesFromCommandLineOrFilelist.
Rename isPrimaryInputAFileAt to isThereAPrimaryInputWithAFilenameAt.
Added a FIXME in doesActionProduceOutput to reflect that some actions actually do not produce output.
