Swift class deinit decl can be implicitly synthesized when emitting
swiftmodule, so swiftmodule always have deinit decl. So resolution of
x-refs to deinit of swift class always success.
But when x-refs points deinit of clang imported class, it always failed
because clang importer doesn't force to synthesize deinit before looking
up.
x-refs to deinit decl appears in only deinit of its subclasses, so it's
serialized only when deinit have body. And deinit has body only on SIB
because deinit is always non-inlinable. It means that this missing of
deinit creation can be problem only on SIB
This commit changes to force to synthesize class deinit
decl before looking up members.
In theory, we shouldn't need to deserialize @_implementationOnly dependencies. However,
potential decl recovery issues may bring down lldb if we insist on not importing these
dependencies, resulting in bad user experience as a result. This patch adds an internal
option to allow importing them and it should only be set by lldb and other tools.
rdar://65570721
In #30614, we started consuming XRefNonLoadedModuleErrors while loading
conformances, since a conformance to a type we cannot load usually
indicates we're trying to load a protocol that was declared in an
@_implementationOnly imported module.
We should also consume TypeErrors that we see where the underlying reason
is an XRefNonLoadedModuleError, since they're likely indicators of the
same thing.
Since the two ExtInfos share a common ClangTypeInfo, and C++ doesn't let us
forward declare nested classes, we need to hoist out AnyFunctionType::ExtInfo
and SILFunctionType::ExtInfo to the top-level.
We also add some convenience APIs on (AST|SIL)ExtInfo for frequently used
withXYZ methods. Note that all non-default construction still goes through the
builder's build() method.
We do not add any checks for invariants here; those will be added later.
Add `async` to the type system. `async` can be written as part of a
function type or function declaration, following the parameter list, e.g.,
func doSomeWork() async { ... }
`async` functions are distinct from non-`async` functions and there
are no conversions amongst them. At present, `async` functions do not
*do* anything, but this commit fully supports them as a distinct kind
of function throughout:
* Parsing of `async`
* AST representation of `async` in declarations and types
* Syntactic type representation of `async`
* (De-/re-)mangling of function types involving 'async'
* Runtime type representation and reconstruction of function types
involving `async`.
* Dynamic casting restrictions for `async` function types
* (De-)serialization of `async` function types
* Disabling overriding, witness matching, and conversions with
differing `async`
VarPattern is today used to implement both 'let' and 'var' pattern bindings, so
today is already misleading. The reason why the name Var was chosen was done b/c
it is meant to represent a pattern that performs 'variable binding'. Given that
I am going to add a new 'inout' pattern binding to this, it makes sense to
give it now a better fitting name before I make things more confusing.
In -swift-version 5 and earlier, #file will continue to be a synonym for #filePath; in a future -swift-version (“Swift 6 mode”), it will become a synonym for #fileID. #file in libraries will be interpreted according to the language mode the library was compiled in, not the language mode its client uses.
Implement this behavior, tied to a frontend flag instead of a language version. We do so by splitting the old `MagicIdentifierLiteralExprKind::File` into two separate cases, `FileIDSpelledAsFile` and `FilePathSpelledAsFile`, and propagating this distinction throughout the AST. This seems cleaner than looking up the setting for the module the declaration belongs to every time we see `File`.
This doesn’t handle module interfaces yet; we’ll take care of those in a separate commit.
Extracts the list of magic identifier literal kinds into a separate file and updates a lot of code to use macro metaprogramming instead of naming half a dozen cases manually. This is a complicated change, but it should be NFC.
The difference with `ModuleFile` is that `ModuleFileSharedCore` provides immutable data and is independent of a particular ASTContext.
It is designed to be able to be shared across multiple `ModuleFile`s of different `ASTContext`s in a thread-safe manner.
* initial changes
* Add tests, undo unnecessary changes.
* Fixing up computed properties accessors and adding tests for getters.
* Adding nested type testcase
* Fixing error message for when accessor is referenced but not acutally found.
* Cleanup.
- Improve diagnostic message.
- Clean up code and tests.
- Delete unrelated nested type `@derivative` attribute tests.
* Temporarily disable class subscript setter derivative registration test.
Blocked by SR-13096.
* Adding libsyntax integration and fixing up an error message.
* Added a helper function for checking if the next token is an accessor label.
* Update utils/gyb_syntax_support/AttributeNodes.py
Co-authored-by: Dan Zheng <danielzheng@google.com>
* Update lib/Parse/ParseDecl.cpp
Co-authored-by: Dan Zheng <danielzheng@google.com>
* Add end-to-end derivative registration tests.
* NFC: run `git clang-format`.
* NFC: clean up formatting.
Re-apply `git clang-format`.
* Clarify parsing ambiguity FIXME comments.
* Adding couple of more testcases and fixing up error message for when accessor is not found on functions resolved.
* Update lib/Sema/TypeCheckAttr.cpp
Co-authored-by: Dan Zheng <danielzheng@google.com>
Co-authored-by: Dan Zheng <danielzheng@google.com>
`DifferentiableFunctionInst` now stores result indices.
`SILAutoDiffIndices` now stores result indices instead of a source index.
`@differentiable` SIL function types may now have multiple differentiability
result indices and `@noDerivative` resutls.
`@differentiable` AST function types do not have `@noDerivative` results (yet),
so this functionality is not exposed to users.
Resolves TF-689 and TF-1256.
Infrastructural support for TF-983: supporting differentiation of `apply`
instructions with multiple active semantic results.
When deserializing, we delay parenting
GenericTypeParamDecls until we install the
GenericParamList on the parent declaration, using
a dummy parent of the ModuleDecl until this
happens.
However when deserializing GenericTypeParamTypes,
we don't necessarily get the opportunity to
deserialize the parent, leaving them with the
dummy parent.
We should probably consider not deserializing
GenericTypeParamDecls at all, we currently only do
it to preserve the sugar of the name, this could
be serialized on the type instead.
For now though, adjust the dummy parent to be the
SerializedASTFile, and tell the ASTVerifier to
skip verification for such generic params.
We don't need to look at re-exports when resolving
cross references. Luckily the old lookup logic
didn't, but the new logic will. Therefore switch
it over to calling the appropriate request for a
direct operator lookup. In addition, return a
deserialization error instead of silently
returning nullptr if the lookup fails.
Store an array of Located<Identifier> instead of
an array of Identifiers and SourceLocs on
OperatorDecl. This allows us to cleanup
OperatorPrecedenceGroupRequest a little.
TBD was missing several opaque type descriptor symbols. The root causes
are: (1) the AST API called by TBD doesn't return opaque type decl if
the decl is from a serialized AST; and (2) the access level of opaque
type decl isn't serialized so TBD considers them as internal.
This change fixes both.
rdar://61833970
Start fixing SR-12526: `@derivative` attribute cross-module deserialization
crash. Remove original `AbstractFunctionDecl *` from `DerivativeAttr` and store
`DeclID` instead, mimicking `DynamicReplacementAttr`.
Type erasure requires a circular construction by its very nature:
@_typeEraser(AnyProto)
protocol Proto { /**/ }
public struct AnyProto : Proto {}
If we eagerly resolve AnyProto, the chain of resolution steps that
deserialization must make goes a little something like this:
Lookup(Proto)
-> Deserialize(@_typeEraser(AnyProto))
-> Lookup(AnyProto)
-> DeserializeInheritedStuff(AnyProto)
-> Lookup(Proto)
This cycle could be broken if the order of incremental inputs was
such that we had already cached the lookup of Proto.
Resolve this cycle in any case by suspending the deserialization of the
type eraser until the point it's demanded by adding
ResolveTypeEraserTypeRequest.
rdar://61270195
Several declarations must be at least partially deserialized before their names can be determined. Add those names to pretty stack traces to make deserialization crashes easier to debug.
We don’t test pretty stack traces, so this doesn’t contain any test changes.
Components of a requirement may be hidden behind an implementation-only
import. Attempts at deserializing them would fail on a 'module not
loaded' error. We only see failures in non-compilation paths, either in
indexing or with tools like ide-test as they try to deserialize
things that are private.
Serialize "is linear?" flag, differentiability parameter indices, and
differentiability generic signature.
Deserialization has some ad-hoc logic for setting the original declaration and
parameter indices for `@differentiable` attributes because
`DeclDeserializer::deserializeDeclAttributes` does not have access to the
original declaration.
Resolves TF-836.
In order to allow this, I've had to rework the syntax of substituted function types; what was previously spelled `<T> in () -> T for <X>` is now spelled `@substituted <T> () -> T for <X>`. I think this is a nice improvement for readability, but it did require me to churn a lot of test cases.
Distinguishing the substitutions has two chief advantages over the existing representation. First, the semantics seem quite a bit clearer at use points; the `implicit` bit was very subtle and not always obvious how to use. More importantly, it allows the expression of generic function types that must satisfy a particular generic abstraction pattern, which was otherwise impossible to express.
As an example of the latter, consider the following protocol conformance:
```
protocol P { func foo() }
struct A<T> : P { func foo() {} }
```
The lowered signature of `P.foo` is `<Self: P> (@in_guaranteed Self) -> ()`. Without this change, the lowered signature of `A.foo`'s witness would be `<T> (@in_guaranteed A<T>) -> ()`, which does not preserve information about the conformance substitution in any useful way. With this change, the lowered signature of this witness could be `<T> @substituted <Self: P> (@in_guaranteed Self) -> () for <A<T>>`, which nicely preserves the exact substitutions which relate the witness to the requirement.
When we adopt this, it will both obviate the need for the special witness-table conformance field in SILFunctionType and make it far simpler for the SILOptimizer to devirtualize witness methods. This patch does not actually take that step, however; it merely makes it possible to do so.
As another piece of unfinished business, while `SILFunctionType::substGenericArgs()` conceptually ought to simply set the given substitutions as the invocation substitutions, that would disturb a number of places that expect that method to produce an unsubstituted type. This patch only set invocation arguments when the generic type is a substituted type, which we currently never produce in type-lowering.
My plan is to start by producing substituted function types for accessors. Accessors are an important case because the coroutine continuation function is essentially an implicit component of the function type which the current substitution rules simply erase the intended abstraction of. They're also used in narrower ways that should exercise less of the optimizer.
