There are a few different use cases here:
1. In Raw SIL, no return folding may not have been run yet implying that a call
to a no-return function /can/ have arbitrary control flow after it (consider
mandatory inlined functions). We need to recognize that the region of code that
is strictly post dominated by the no-return function is "transitively
unreachable" and thus leaking is ok from that point. *Footnote 1*.
2. In Canonical and Raw SIL, we must recognize that unreachables and no-return
functions constitute places where we are allowed to leak.
rdar://29791263
----
*Footnote 1*: The reason why this is done is since we want to emit unreachable
code diagnostics when we run no-return folding. By leaving in the relevant code,
we have preserved all of the SILLocations on that code allowing us to create
really nice diagnostics.
Separate formal lowered types from SIL types.
The SIL type of an argument will depend on the SIL module's conventions.
The module conventions are determined by the SIL stage and LangOpts.
Almost NFC, but specialized manglings are broken incidentally as a result of
fixes to the way passes handle book-keeping of aruments. The mangler is fixed in
the subsequent commit.
Otherwise, NFC is intended, but quite possible do to rewriting the logic in many
places.
Most of this involved sprinkling ValueOwnershipKind::Owned in many places. In
some of these places, I am sure I was too cavalier and I expect some of them to
be trivial. The verifier will help me to track those down.
On the other hand, I do expect there to be some places where we are willing to
accept guaranteed+trivial or owned+trivial. In those cases, I am going to
provide an aggregate ValueOwnershipKind that will then tell SILArgument that it
should disambiguate using the type. This will eliminate the ackwardness from
such code.
I am going to use a verifier to fix such cases.
This commit also begins the serialization of ValueOwnershipKind of arguments,
but does not implement parsing of value ownership kinds. That and undef are the
last places that we still use ValueOwnershipKind::Any.
rdar://29791263
This in the case of insertFunctionArgument requires a ValueOwnershipKind to be
specified since we use that for transformations of function argument lists that
are only correct after the transformation is complete. This only occurs in
FunctionSignatureOptimizations.
On the other hand, createFunctionArgument is only used to construct completely
new argument lists, so we can instead just rely on the function we are in rather
than require the user to pass it in.
rdar://29791263
We preserve the current behavior of assuming Any ownership always and use
default arguments to hide this change most of the time. There are asserts now in
the SILBasicBlock::{create,replace,insert}{PHI,Function}Argument to ensure that
the people can only create SILFunctionArguments in entry blocks and
SILPHIArguments in non-entry blocks. This will ensure that the code in tree
maintains the API distinction even if we are not using the full distinction in
between the two.
Once the verifier is finished being upstreamed, I am going to audit the
createPHIArgument cases for the proper ownership. This is b/c I will be able to
use the verifier to properly debug the code. At that point, I will also start
serializing/printing/parsing the ownershipkind of SILPHIArguments, but lets take
things one step at a time and move incrementally.
In the process, I also discovered a CSE bug. I am not sure how it ever worked.
Basically we replace an argument with a new argument type but return the uses of
the old argument to refer to the old argument instead of a new argument.
rdar://29671437
For a long time, we have:
1. Created methods on SILArgument that only work on either function arguments or
block arguments.
2. Created code paths in the compiler that only allow for "function"
SILArguments or "block" SILArguments.
This commit refactors SILArgument into two subclasses, SILPHIArgument and
SILFunctionArgument, separates the function and block APIs onto the subclasses
(leaving the common APIs on SILArgument). It also goes through and changes all
places in the compiler that conditionalize on one of the forms of SILArgument to
just use the relevant subclass. This is made easier by the relevant APIs not
being on SILArgument anymore. If you take a quick look through you will see that
the API now expresses a lot more of its intention.
The reason why I am performing this refactoring now is that SILFunctionArguments
have a ValueOwnershipKind defined by the given function's signature. On the
other hand, SILBlockArguments have a stored ValueOwnershipKind. Rather than
store ValueOwnershipKind in both instances and in the function case have a dead
variable, I decided to just bite the bullet and fix this.
rdar://29671437
Before this commit all code relating to handling arguments in SILBasicBlock had
somewhere in the name BB. This is redundant given that the class's name is
already SILBasicBlock. This commit drops those names.
Some examples:
getBBArg() => getArgument()
BBArgList => ArgumentList
bbarg_begin() => args_begin()
This ireapplies commit 255c52de9f.
Original commit message:
Serialize debug scope and location info in the SIL assembler language.
At the moment it is only possible to test the effects that SIL
optimization passes have on debug information by observing the
effects of a full .swift -> LLVM IR compilation. This change enable us
to write targeted testcases for single SIL optimization passes.
The new syntax is as follows:
sil-scope-ref ::= 'scope' [0-9]+
sil-scope ::= 'sil_scope' [0-9]+ '{'
sil-loc
'parent' scope-parent
('inlined_at' sil-scope-ref )?
'}'
scope-parent ::= sil-function-name ':' sil-type
scope-parent ::= sil-scope-ref
sil-loc ::= 'loc' string-literal ':' [0-9]+ ':' [0-9]+
Each instruction may have a debug location and a SIL scope reference
at the end. Debug locations consist of a filename, a line number, and
a column number. If the debug location is omitted, it defaults to the
location in the SIL source file. SIL scopes describe the position
inside the lexical scope structure that the Swift expression a SIL
instruction was generated from had originally. SIL scopes also hold
inlining information.
<rdar://problem/22706994>
At the moment it is only possible to test the effects that SIL
optimization passes have on debug information by observing the
effects of a full .swift -> LLVM IR compilation. This change enable us
to write targeted testcases for single SIL optimization passes.
The new syntax is as follows:
sil-scope-ref ::= 'scope' [0-9]+
sil-scope ::= 'sil_scope' [0-9]+ '{'
sil-loc
'parent' scope-parent
('inlined_at' sil-scope-ref )?
'}'
scope-parent ::= sil-function-name ':' sil-type
scope-parent ::= sil-scope-ref
sil-loc ::= 'loc' string-literal ':' [0-9]+ ':' [0-9]+
Each instruction may have a debug location and a SIL scope reference
at the end. Debug locations consist of a filename, a line number, and
a column number. If the debug location is omitted, it defaults to the
location in the SIL source file. SIL scopes describe the position
inside the lexical scope structure that the Swift expression a SIL
instruction was generated from had originally. SIL scopes also hold
inlining information.
<rdar://problem/22706994>
Use malloc/free for allocating/freeing SIL instructions instead of using the BumpPtrAllocator. This allows for memory reuse and significantly reduces the memory footprint of the compiler.
For example, a peak memory usage during a compilation of the standard library and StdlibUnitTest is reduced by 25%-30%. The performance of the compiler seems to be not affected by this change, i.e. no slowdown is measured.
The use-after-free issues reported by build bots are fixed now.
rdar://23303031
This commit adds the basic support for delete notification handlers. The SIL
Module is notified every time an instruction is deleted. The module will forward
notification messages to users who ask to be notified. The motivation for this
work is described in the upcoming commit to OptimizerDesign.md.
The drivers for this change are providing a simpler API to SIL pass
authors, having a more efficient of the in-memory representation,
and ruling out an entire class of common bugs that usually result
in hard-to-debug backend crashes.
Summary
-------
SILInstruction
Old New
+---------------+ +------------------+ +-----------------+
|SILInstruction | |SILInstruction | |SILDebugLocation |
+---------------+ +------------------+ +-----------------+
| ... | | ... | | ... |
|SILLocation | |SILDebugLocation *| -> |SILLocation |
|SILDebugScope *| +------------------+ |SILDebugScope * |
+---------------+ +-----------------+
We’re introducing a new class SILDebugLocation which represents the
combination of a SILLocation and a SILDebugScope.
Instead of storing an inline SILLocation and a SILDebugScope pointer,
SILInstruction now only has one SILDebugLocation pointer. The APIs of
SILBuilder and SILDebugLocation guarantees that every SILInstruction
has a nonempty SILDebugScope.
Developer-visible changes include:
SILBuilder
----------
In the old design SILBuilder populated the InsertedInstrs list to
allow setting the debug scopes of all built instructions in bulk
at the very end (as the responsibility of the user). In the new design,
SILBuilder now carries a "current debug scope" state and immediately
sets the debug scope when an instruction is inserted.
This fixes a use-after-free issue with with SIL passes that delete
instructions before destroying the SILBuilder that created them.
Because of this, SILBuilderWithScopes no longer needs to be a template,
which simplifies its call sites.
SILInstruction
--------------
It is neither possible or necessary to manually call setDebugScope()
on a SILInstruction any more. The function still exists as a private
method, but is only used when splicing instructions from one function
to another.
Efficiency
----------
In addition to dropping 20 bytes from each SILInstruction,
SILDebugLocations are now allocated in the SILModule's bump pointer
allocator and are uniqued by SILBuilder. Unfortunately repeat compiles
of the standard library already vary by about 5% so I couldn’t yet
produce reliable numbers for how much this saves overall.
rdar://problem/22017421
This reverts commit r32359.
I'll look into doing fine-grained rebuilds of portions of the call graph
after some other changes go in that will make that more reasonable to
do.
Swift SVN r32379
Call back to the SILModule to notify of instructions being inserted or
removed from basic blocks.
The intent is to use this to notify the call graph (if one exists and
the module knows about it). We can then use these notifications to
automatically update the call graph.
Swift SVN r32359
Move the implementation of SILBasicBlock::splitBasicBlockAndBranch into
CFG's util function swift::splitBasicBlockAndBranch since it's the only
user, and update the latter to take a SILBuilder and use it to create
the branch to the split-off block.
Swift SVN r32128
The cloned abstract variables may end up having different types
so they need to be distinct from the originals.
This fixes an crash/assertion in the LLVM backend.
rdar://problem/21109015
Swift SVN r29184
the debug scope of each instruction to be the debug scope of the new
function.
This will be tested by the functionality in function signature opts.
Swift SVN r22553
constructor in SILBasicBlock::createArgument.
By default the argument is nullptr so any place that currently does not
need to pass in the ValueDecl will not need to be updated given the new
behavior.
Swift SVN r22379
SILArgument::getIncomingValues() takes in an out array parameter and attempts to
gather up all values from the SILArguments parents predecessors whose value the
SILArgument could take on.
This will let me refactor the single predecessor handling code to also handle
multiple predecessors in a simple way.
Swift SVN r21864
