Type annotations for instruction operands are omitted, e.g.
```
%3 = struct $S(%1, %2)
```
Operand types are redundant anyway and were only used for sanity checking in the SIL parser.
But: operand types _are_ printed if the definition of the operand value was not printed yet.
This happens:
* if the block with the definition appears after the block where the operand's instruction is located
* if a block or instruction is printed in isolation, e.g. in a debugger
The old behavior can be restored with `-Xllvm -sil-print-types`.
This option is added to many existing test files which check for operand types in their check-lines.
While doing #76740 I iteratively was adding new `REQUIRES:` as new
usages of the features were found, but I did not realize that at the
same time other people might be removing some of those usages. The tests
in this commit had some `REQUIRES:` line for a previous
`-enable-experimental/upcoming-feature`, but they not longer use those
features, so the `REQUIRES:` were effectively disabling the tests (at
least in the case of `KeyPathWithStaticMembers`. In other cases they
might still had executed).
Find all the usages of `--enable-experimental-feature` or
`--enable-upcoming-feature` in the tests and replace some of the
`REQUIRES: asserts` to use `REQUIRES: swift-feature-Foo` instead, which
should correctly apply to depending on the asserts/noasserts mode of the
toolchain for each feature.
Remove some comments that talked about enabling asserts since they don't
apply anymore (but I might had miss some).
All this was done with an automated script, so some formatting weirdness
might happen, but I hope I fixed most of those.
There might be some tests that were `REQUIRES: asserts` that might run
in `noasserts` toolchains now. This will normally be because their
feature went from experimental to upcoming/base and the tests were not
updated.
Use the `%target-swift-5.1-abi-triple` substitution to compile the tests for
deployment to the minimum OS versions required for use of opaque types, instead
of disabling availability checking.
In #39612 we added subtyping for keypaths-as-functions, but during application
the implementation naively coerced the keypath expression itself to the
inferred supertype, resulting in erroneous results. This patch updates the
solution application logic to build the keypath-function conversion expression
based entirely on the 'natural' keypath type, only converting to the inferred
supertype at the end via the usual coerceToType machinery for function
conversions.
KeyPath's getter/setter/hash/equals functions have their own calling
convention, which receives generic arguments and embedded indices from a
given KeyPath argument buffer.
The convention was previously implemented by:
1. Accepting an argument buffer as an UnsafeRawPointer and casting it to
indices tuple pointer in SIL.
2. Bind generic arguments info from the given argument buffer while emitting
prologue in IRGen by creating a new forwarding thunk.
This 2-phase lowering approach was not ideal, as it blocked KeyPath
projection optimization [^1], and also required having a target arch
specific signature lowering logic in SIL-level [^2].
This patch centralizes the KeyPath accessor calling convention logic to
IRGen, by introducing `@convention(keypath_accessor_XXX)` convention in
SIL and lowering it in IRGen. This change unblocks the KeyPath projection
optimization while capturing subscript indices, and also makes it easier
to support WebAssembly target.
[^1]: https://github.com/apple/swift/pull/28799
[^2]: https://forums.swift.org/t/wasm-support/16087/21
The SIL type of the keypath instruction is lowered in the function's
type expansion context, the various types involved in patterns are
unlowered AST types.
When verifying that the types matchup apply the type expansion to both
sides.
rdar://72134937
Array literals only need to be finalized, if the array is really allocated.
In case of zero elements, no allocation is done, but the empty-array singleton is used.
"Finalization" means to emit an end_cow_mutation instruction on the array.
As the empty-array singleton is a read-only and shared object, it's not legal to do a end_cow_mutation on it.
For COW support in SIL it's required to "finalize" array literals.
_finalizeUninitializedArray is a compiler known stdlib function which is called after all elements of an array literal are stored.
This runtime function marks the array literal as finished.
%uninitialized_result_tuple = apply %_allocateUninitializedArray(%count)
%mutable_array = tuple_extract %uninitialized_result_tuple, 0
%elem_base_address = tuple_extract %uninitialized_result_tuple, 1
...
store %elem_0 to %elem_addr_0
store %elem_1 to %elem_addr_1
...
%final_array = apply %_finalizeUninitializedArray(%mutable_array)
In this commit _finalizeUninitializedArray is still a no-op because the COW support is not used in the Array implementation yet.
In order to allow this, I've had to rework the syntax of substituted function types; what was previously spelled `<T> in () -> T for <X>` is now spelled `@substituted <T> () -> T for <X>`. I think this is a nice improvement for readability, but it did require me to churn a lot of test cases.
Distinguishing the substitutions has two chief advantages over the existing representation. First, the semantics seem quite a bit clearer at use points; the `implicit` bit was very subtle and not always obvious how to use. More importantly, it allows the expression of generic function types that must satisfy a particular generic abstraction pattern, which was otherwise impossible to express.
As an example of the latter, consider the following protocol conformance:
```
protocol P { func foo() }
struct A<T> : P { func foo() {} }
```
The lowered signature of `P.foo` is `<Self: P> (@in_guaranteed Self) -> ()`. Without this change, the lowered signature of `A.foo`'s witness would be `<T> (@in_guaranteed A<T>) -> ()`, which does not preserve information about the conformance substitution in any useful way. With this change, the lowered signature of this witness could be `<T> @substituted <Self: P> (@in_guaranteed Self) -> () for <A<T>>`, which nicely preserves the exact substitutions which relate the witness to the requirement.
When we adopt this, it will both obviate the need for the special witness-table conformance field in SILFunctionType and make it far simpler for the SILOptimizer to devirtualize witness methods. This patch does not actually take that step, however; it merely makes it possible to do so.
As another piece of unfinished business, while `SILFunctionType::substGenericArgs()` conceptually ought to simply set the given substitutions as the invocation substitutions, that would disturb a number of places that expect that method to produce an unsubstituted type. This patch only set invocation arguments when the generic type is a substituted type, which we currently never produce in type-lowering.
My plan is to start by producing substituted function types for accessors. Accessors are an important case because the coroutine continuation function is essentially an implicit component of the function type which the current substitution rules simply erase the intended abstraction of. They're also used in narrower ways that should exercise less of the optimizer.
The constraint solver support for the Swift 3 function type behavior
has been removed, so it's no longer possible to pun the same value as
both a function taking multiple parameters and a function taking a
single tuple argument.
This means the entire parameter list is no longer a target for
substitution as a single value, so the most general form of a function
value passes each parameter indirectly instead of passing a single
tuple parameter indirectly.
`\.self` is the final chosen syntax. Implement support for this syntax, and remove the stopgap builtin and `WritableKeyPath._identity` property that were in place before.
Make sure the implementation can handle a key path with zero components by removing inappropriate assumptions that the number of components is always non-empty. Identity key paths also need some special behavior:
- Appending an identity key path should be an identity operation for the other operand
- Identity key paths have a `MemoryLayout.offset(of:)` zero
- Identity key paths interop with KVC as key paths to `@"self"`
To be able to exercise and test this behavior, add a `Builtin.identityKeyPath()` function and `WritableKeyPath._identity` accessor in lieu of finalized syntax.
The SILGen testsuite consists of valid Swift code covering most language
features. We use these tests to verify that no unknown nodes are in the
file's libSyntax tree. That way we will (hopefully) catch any future
changes or additions to the language which are not implemented in
libSyntax.
I am going to leave in the infrastructure around this just in case. But there is
no reason to keep this in the tests themselves. I can always just revert this
and I don't think merge conflicts are likely due to previous work I did around
the tooling for this.
