Swift interfaces currently aren't meant to expose C++ in their API so we should not also bring in this C++-related module dependency which is not found when the ClangImporter is not configured for C++.
A swiftmodule can only be correctly ingested by a compiler
that has a matching state of using or not-using
NoncopyableGenerics.
The reason for this is fundamental: the absence of a Copyable
conformance in the swiftmodule indicates that a type is
noncopyable. Thus, if a compiler with NoncopyableGenerics
reads a swiftmodule that was not compiled with that feature,
it will think every type in that module is noncopyable.
Similarly, if a compiler with NoncopyableGenerics produces a
swiftmodule, there will be Copyable requirements on each
generic parameter that the compiler without the feature will
become confused about.
The solution here is to trigger a module mismatch, so that
the compiler re-generates the swiftmodule file using the
swiftinterface, which has been kept compatible with the compiler
regardless of whether the feature is enabled.
Previously, canImport lookup is not completely working with explicit
module due to two issues:
* For clang modules, canImport check still do a full modulemap lookup
which is repeated work from scanner. For caching builds, this lookup
cannot be performed because all modulemap and search path are dropped
after scanning.
* For swift module, if the canImport module was never actually imported
later, this canImport check will fail during the actual compilation,
causing different dependencies in the actual compilation.
To fix the problem, first unified the lookup method for clang and swift
module, which will only lookup the module dependencies reported by
scanner to determine if `canImport` succeed or not. Secondly, add all
the successful `canImport` check modules into the dependency of the
current module so this information can be used during actual
compilation.
Note the behavior change here is that if a module is only checked in
`canImport` but never imported still needs to be built. Comparing to
implicit module build, this can bring in additional clang modules if
they are only check inside `canImport` but should not increase work for
swift modules (where binary module needs to be on disk anyway) or the
most common usecase for `canImport` which is to check the same module
before importing.
rdar://121082031
When loading input from CAS, `swift-frontend` relies on the input file
name to determine the type to look from CAS entry. In the case where
file extension is `.private.swiftinterface`, swift mis-identify that as
`.swiftinterface` file and look up the wrong input file. Add a new
file type lookup function that can figure out the type from the full
filename.
Also add few diagnostics during the CAS lookup for the input file to
error out immediately, rather than rely on the lookup failure later.
Redirecting file system can canonicalize the file path before forwarding
the path to IncludeTreeFileSystem, which is a simplied FS that can only
intepret the paths that has been seen by dep-scanner. Since all files
that need redirecting already added to underlying FS via DepScan, there
is no need for such layer when compiling using clang-include-tree.
rdar://119727344
`-disable-sandbox` to disable sandboxing when invoking subprocess from
from the frontend. Since `sandbox(7)` in macOS doesn't support nested
sandbox, complation used to fail when the parent build process is sandboxed.
It has an extension .package.swiftinterface and contains package decls
as well as SPIs and public/inlinable decls. When a module is loaded
from interface, it now looks up the package-name in the interface
and checks if the importer is in the same package. If so, it uses
that package interface found to load the module. If not, uses the existing
logic to load modules.
Resolves rdar://104617854
Update swift cache key computation mechanism from one cache key per
output, to one cache key per primary input file (for all outputs that
associated with that input).
The new schema allows fewer cache lookups while still preserving most of
the flexibility for batch mode and incremental mode.
[Explicit Module Builds] Restore prior behavior of consuming `.h` dependencies of binary module dependencies directly, instead of attempting to load their PCH
We only record these dependencies in CAS mode, because we require explicit PCH tasks to be produced for imported header of binary module dependencies. In the meantime, in non-CAS mode loading clients will consume the `.h` files encoded in the `.swiftmodules` directly.
Followup changes to SwiftDriver will enable explicit PCH compilation of such dependenceis, but for the time being restore prior behavior for non-CAS explicit module builds.
Resolves rdar://116006619
Always check for the flag before evaluating `TypeCheckSourceFileRequest`,
rather than just in `performSema()`. This ensures later compilation stages that
re-request eager typechecking honor the flag.
Rename -experimental-serialize-external-decls only to
-experimental-skip-non-exportable-decls in preparation for the flag being used
to influence more than just serialization.
Resolves rdar://116771543
An "API descriptor" file is JSON describing the externally accessible symbols
of a module and metadata associated with those symbols like availability and
SPI status. This output was previously only generated by the
`swift-api-extract` alias of `swift-frontend`, which is desgined to take an
already built module as input. Post-processing a built module to extract this
information is inefficient because the module and the module's dependencies
need to be deserialized in order to visit the entire AST. We can generate this
output more efficiently as a supplementary output of the -emit-module job that
originally produced the module (since the AST is already available in-memory).
The -emit-api-descriptor flag can be used to request this output.
This change lays the groundwork by introducing frontend flags. Follow up
changes are needed to make API descriptor emission during -emit-module
functional.
Part of rdar://110916764.
'ModuleDependencyScanner' maintains a Thread Pool along with a pool of workers
which are capable of executing a filesystem lookup of a named module dependency.
When resolving imports of a given Swift module, each import's resolution
operation can be issued asunchronously.
From being a scattered collection of 'static' methods in ScanDependencies.cpp
and member methods of ASTContext. This makes 'ScanDependencies.cpp' much easier
to read, and abstracts the actual scanning logic away to a place with common
state which will make it easier to reason about in the future.
When we run an interface verification tasks with Explicit module builds, we directly invoke a '-explicit-interface-module-build' instance with a '-typecheck-module-from-interface' action. So the builder needs to recognize this as a typechecking invocation. In implicit builds, this gets lowered into a separate compiler sub-instance with a '-typecheck' action, for some reason.
resolves rdar://115565571
This isn't a "complete" port of the standard library for embedded Swift, but
something that should serve as a starting point for further iterations on the
stdlib.
- General CMake logic for building a library as ".swiftmodule only" (ONLY_SWIFTMODULE).
- CMake logic in stdlib/public/core/CMakeLists.txt to start building the embedded stdlib for a handful of hardcoded target triples.
- Lots of annotations throughout the standard library to make types, functions, protocols unavailable in embedded Swift (@_unavailableInEmbedded).
- Mainly this is about stdlib functionality that relies on existentials, type erasure, metatypes, reflection, string interpolations.
- We rely on function body removal of unavailable functions to eliminate the actual problematic SIL code (existentials).
- Many .swift files are not included in the compilation of embedded stdlib at all, to simplify the scope of the annotations.
- EmbeddedStubs.swift is used to stub out (as unavailable and fatalError'd) the missing functionality.
To enable MCCAS, the following driver options have been added
-cas-backend: Enable MCCAS backend in swift, the option
-cache-compile-job must also be used.
-cas-backend-mode=native: Set the CAS Backend mode to emit an object
file after materializing it from the CAS.
-cas-backend-mode=casid: Emit a file with the CASID for the CAS that was
created.
-cas-backend-mode=verify: Verify that the object file created is
identical to the object file materialized from the CAS.
-cas-emit-casid-file: Emit a .casid file next to the object file when
CAS Backend is enabled.
- Add a flag to the serialized module (IsEmbeddedSwiftModule)
- Check on import that the mode matches (don't allow importing non-embedded module in embedded mode and vice versa)
- Drop TBD support, it's not expected to work in embedded Swift for now
- Drop auto-linking backdeploy libraries, it's not expected to backdeploy embedded Swift for now
- Drop prespecializations, not expected to work in embedded Swift for now
- Use CMO to serialize everything when emitting an embedded Swift module
- Change SILLinker to deserialize/import everything when importing an embedded Swift module
- Add an IR test for importing modules
- Add a deserialization validation test
This enables one to use varying prefixes when checking diagnostics with the
DiagnosticVerifier. So for instance, I can make a test work both with and
without send-non-sendable enabled by adding additional prefixes. As an example:
```swift
// RUN: %target-swift-frontend ... -verify-additional-prefix no-sns-
// RUN: %target-swift-frontend ... -verify-additional-prefix sns-
let x = ... // expected-error {{This is always checked no matter what prefixes I added}}
let y = ... // expected-no-sns-error {{This is only checked if send non sendable is disabled}}
let z = ... // expected-sns-error {{This is only checked if send non sendable is enabled}}
let w = ... // expected-no-sns-error {{This is checked for a specific error when sns is disabled...}}
// expected-sns-error @-1 {{and for a different error when sns is enabled}}
```
rdar://114643840
This option is designed to be used in conjunction with
`-experimental-lazy-typecheck` and `-experimental-skip-all-function-bodies`
when emitting a resilient module. The emitted binary module should contain only
the decls needed by clients and should contain roughly the same contents as it
would if the corresponding swiftinterface were emitted instead and then built.
This functionality is a work in progress. Some parts of the AST may still get
typechecked unnecessarily. Additionally, serialization does not trigger the
appropriate typechecking requests for some ASTs and then fails due to missing
types.
Resolves rdar://114230586
